Welcome! Log In Create A New Profile

Advanced

External usb disk not working

Posted by lolcese 
lolcese
External usb disk not working
February 23, 2014 09:15AM
Hi all, I recently had a dead disk on a lacie d2 network NAS, and I installed debian.
Almost everything is working fine, except that I can't mount an external usb disk. Here is all the info:

The result of uname -a is
Linux lacie-NAS 2.6.22.7 #1 Mon Oct 25 15:17:58 CEST 2010 armv5tejl GNU/Linux

If I try to modprob usb_storage (I installed linux-source), I get
FATAL: Module usb_storage not found.

After doing mount usbfs -t usbfs /proc/bus/usb, if I do lsusb, I get (the Iomega is the disk)
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 059b:0370 Iomega Corp.
Bus 001 Device 001: ID 0000:0000

If I do a dmseg, I get (I connected and disconnected the disk a couple of times)
Init Marvell USB port 0 => HOST
Marvell USB EHCI Host controller #0: c0493600
Init Marvell USB port 1 => HOST
Marvell USB EHCI Host controller #1: c0493400
ehci_marvell ehci_marvell.4523: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.4523: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
ehci_marvell ehci_marvell.167817: new USB bus registered, assigned bus number 2
ehci_marvell ehci_marvell.167817: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 2-0:1.0: USB hub found
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
usb 1-1: new high speed USB device using ehci_marvell and address 2
usb 1-1: USB disconnect, address 2
usb 1-1: new high speed USB device using ehci_marvell and address 3
usb 1-1: USB disconnect, address 3
usb 1-1: new high speed USB device using ehci_marvell and address 4

The USB disk doesn't show in a fdisk -l​

Any ideas?
Thanks a lot
marcint43
Re: External usb disk not working
March 06, 2014 03:25AM
give more details is you want that anyone help you...

1. what kind this disk is ? sata/ide/sata2/sas...?

2. and how connected ?
> hub 2-0:1.0: USB hub found
If this is hub for example "sata to usb" did you try any other producent ?
There are lot of piece of shit in usb hubs on the stock...

3. what hardware this nas is ? which producent / model .. ?

4.
> If I try to modprob usb_storage (I installed linux-source), I get
> FATAL: Module usb_storage not found.

do you have compiled that in kernel ? attach config of your kernel.
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: