Welcome! Log In Create A New Profile

Advanced

Scripts for Wheezy en Squeeze fail on ar

Posted by lourens 
Scripts for Wheezy en Squeeze fail on ar
February 03, 2015 04:26AM
/tmp # ./kirkwood.debian-wheezy.sh


!!!!!! DANGER DANGER DANGER DANGER DANGER DANGER !!!!!!

This script will replace the bootloader on /dev/mtd0.

If you lose power while the bootloader is being flashed,
your device could be left in an unusable state.


This script will configure your Dockstar to boot Debian
from a USB device. Before running this script, you should have
used fdisk to create the following partitions:

/dev/sda1 (Linux ext2, at least 400MB)
/dev/sda2 (Linux swap, recommended 256MB)


This script will DESTROY ALL EXISTING DATA on /dev/sda1
Please double check that the device on /dev/sda1 is the correct device.

By typing ok, you agree to assume all liabilities and risks
associated with running this installer.

If everything looks good, type 'ok' to continue: ok
Installing Bootloader
# checking for /usr/sbin/nandwrite...
# checking for /usr/sbin/nanddump...
# checking for /usr/sbin/flash_erase...
# checking for /usr/sbin/fw_printenv...
# checking for /etc/fw_env.config...

# Validating existing uBoot...
Block size 131072, page size 2048, OOB size 64
Dumping data starting at 0x00000000 and ending at 0x00080000...
Connecting to jeff.doozan.com (50.116.34.13:80)
Connecting to projects.doozan.com (50.116.34.13:80)
## Valid uBoot detected: [pinkpogo davygravy-2012-02-20-current]
## The newest uBoot is already installed on mtd0.

# uBoot installation has completed successfully.
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
427392 inodes, 1709056 blocks
85452 blocks (5%) reserved for the super user
First data block=0
Maximum filesystem blocks=4194304
53 block groups
32768 blocks per group, 32768 fragments per group
8064 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
./kirkwood.debian-wheezy.sh: line 313: /sbin/mkswap: not found
Connecting to cdn.debian.net (94.75.223.121:80)
./kirkwood.debian-wheezy.sh: line 349: ar: not found
tar: can't open 'data.tar.gz': No such file or directory
mv: can't rename './usr/sbin/debootstrap': No such file or directory
mv: can't rename './usr/share/debootstrap': No such file or directory
# checking for /usr/share/debootstrap/pkgdetails...

# Installing /usr/share/debootstrap/pkgdetails...
Connecting to download.doozan.com (50.116.34.13:80)
wget: can't open '/usr/share/debootstrap/pkgdetails.md5': No such file or directory
Connecting to download.doozan.com (50.116.34.13:80)
wget: can't open '/usr/share/debootstrap/pkgdetails.md5': No such file or directory
## Could not install /usr/share/debootstrap/pkgdetails from http://download.doozan.com/debian/pkgdetails, exiting.
/tmp # ar
-sh: ar: not found

Any idea what I am doing wrong? I am trying this out on a Pogoplug series 4 with the pink logo.
Re: Scripts for Wheezy en Squeeze fail on ar
February 03, 2015 05:38AM
The ./kirkwood.debian-wheezy.sh script is obsolete. See:

kernel/rootfs:
http://forum.doozan.com/read.php?2,12096

u-boot:
http://forum.doozan.com/read.php?3,12381

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: