Welcome! Log In Create A New Profile

Advanced

Debian on NSA320s - possible?

Posted by pengu 
Forum List Message List New Topic
pengu
Re: Debian on NSA320s - possible?
August 11, 2015 07:02PM 
Marvell>> mw.l f1010100 0020c000
Marvell>> usb start
(Re)start USB...
USB:   scanning bus for devices... 3 USB Device(s) found
Waiting for storage device(s) to settle before scanning...
1 Storage Device(s) found
Marvell>>

thank you bodhi, I've seen this earlier but I didn't tried it and I didn't find it later

interesting thing .. shootdown is working now 

invoke-rc.d: -----------------------------------------------------
invoke-rc.d: WARNING: 'invoke-rc.d smbd reload' called
invoke-rc.d: during shutdown sequence.
invoke-rc.d: enabling safe mode: initscript policy layer disabled
invoke-rc.d: -----------------------------------------------------
Reloading /etc/samba/smb.conf: smbd.
done.
[....] Unmounting temporary filesystems...done.
[....] Deactivating swap...done.
[  218.124286] EXT4-fs (sda3): re-mounted. Opts: (null)
[info] Will now halt.
logger: Will halt - now
[  220.264923] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  220.271484] reboot: Power down


after shootdown and power on .. lan seems to be broken: 

Listening on LPF/eth0/5c:f4:ab:e3:e6:1e
Sending on   LPF/eth0/5c:f4:ab:e3:e6:1e
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
done.

when starting debian via the nsa310s u-boot via uart, the lan is working fine



Edited 4 time(s). Last edit at 08/11/2015 07:34PM by pengu.
Reply Quote
bodhi
Re: Debian on NSA320s - possible?
August 11, 2015 07:34PM
pengu,

>
> after shootdown and power on .. lan seems to be
> broken

Are you running the latest kernel (4.1.0-kirkwood-tld-2)?

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
pengu
Re: Debian on NSA320s - possible?
August 11, 2015 07:39PM
bodhi Wrote:
-------------------------------------------------------
> pengu,
>
> >
> > after shootdown and power on .. lan seems to be
> > broken
>
> Are you running the latest kernel
> (4.1.0-kirkwood-tld-2)?

yes, this fixes the issue 

[    1.958624] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    2.043928] mv643xx_eth: Set the PHY to fix link down
...
...
[   17.144493] mv643xx_eth: Set the PHY back to auto-negotiation mode
[   17.150802] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.541614] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[   19.551454] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Copyright 2004-2014 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/5c:f4:ab:e3:e6:1e
Sending on   LPF/eth0/5c:f4:ab:e3:e6:1e
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPOFFER from 192.168.1.1
DHCPACK from 192.168.1.1
Reloading /etc/samba/smb.conf: smbd.
bound to 192.168.1.168 -- renewal in 20282 seconds.



Edited 2 time(s). Last edit at 08/12/2015 03:09AM by pengu.
Reply Quote
pengu
NSA320s - cannot connect two 3,5 '' HDDs
August 15, 2015 04:13PM
another problem raises, as I connect the HDDs.
any 2,5 '' HDD is working fine, but a 3,5 '' HDD is only working in the left slot.
all testet HDDs are working fine on other devices, so it's not on them.

using another power supply and using another PCI-E to S-ATA connector (from my NSA325v2) doesn't solve this.
I've decided to keep the 2,5 Toshiba HDDs because the speed doesn't increase as much as I expected by switching to 3,5 '' HDDS on NSA325v2 but now I have to, otherwhise the NSA320s isn't usable ;-(

any ideas?
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 15, 2015 04:22PM
pengu,

It's a strange problem. Please post serial console boot log and dmesg.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
pengu
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 15, 2015 04:56PM 
Reset IDE:                                                                                                        
Marvell Serial ATA Adapter                                                                                        
Integrated Sata device found                                                                                      
[0 0 0]: Enable DMA mode (6)                                                                                      
  Device 0 @ 0 0:                                                                                                 
Model: WDC WD20EARX-00PASB0                     Firm: 51.0AB51 Ser#:      WD-WCAZAD825773                         
            Type: Hard Disk                                                                                       
            Supports 48-bit addressing                                                                            
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
there should be a second HDD

http://pastebin.com/raw.php?i=1iWfjnqJ

no I'll put the not recognized HDD to the other slot and put a 2,5 '' HDD in the other 



Marvell>> ide reset                                                                                               
                                                                                                                  
Reset IDE:                                                                                                        
Marvell Serial ATA Adapter                                                                                        
Integrated Sata device found                                                                                      
[0 0 0]: Enable DMA mode (6)                                                                                      
  Device 0 @ 0 0:                                                                                                 
Model: WDC WD20EARS-00MVWB0                     Firm: 51.0AB51 Ser#:      WD-WCAZA7371950                         
            Type: Hard Disk                                                                                       
            Supports 48-bit addressing                                                                            
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)                                                 
[0 1 0]: Enable DMA mode (5)                                                                                      
  Device 1 @ 0 1:                                                                                                 
Model: Hitachi HTS541616J9SA00                  Firm: SB4OC70P Ser#:       SB2441SJCU2BGE                         
            Type: Hard Disk                                                                                       
            Supports 48-bit addressing                                                                            
            Capacity: 152627.8 MB = 149.0 GB (312581808 x 512)

http://pastebin.com/raw.php?i=yyTfPfyW


oops there was an second rootfs and so it's used



Edited 5 time(s). Last edit at 08/15/2015 05:14PM by pengu.
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 15, 2015 06:09PM
pengu,

Were both of the boot logs above from a power down status? i.e. removed power cord.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
pengu
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 15, 2015 06:12PM
bodhi Wrote:
-------------------------------------------------------
> pengu,
>
> Were both of the boot logs above from a power down
> status? i.e. removed power cord.


yes, first with two 3,5 '' and second with one 3,5 and 2,5 '' HDD
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 15, 2015 06:19PM
Do this for the 1st case with the missing 2nd HDD:

After booted into Debian: 
/bin/echo 47 > /sys/class/gpio/export
/bin/echo "out" > /sys/class/gpio/gpio47/direction 

/bin/echo 49 > /sys/class/gpio/export
/bin/echo "out" > /sys/class/gpio/gpio49/direction

/bin/echo 1 > /sys/class/gpio/gpio49/value
/bin/echo 1 > /sys/class/gpio/gpio47/value
/bin/echo 0 > /sys/class/gpio/gpio49/value

And then check dmesg to see it the 2nd HDD comes up.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)



Edited 1 time(s). Last edit at 08/15/2015 06:22PM by bodhi.
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 15, 2015 07:52PM
pengu,

If the above did not work, regenerate uImage using the kirkwood-nsa310s.dtb, boot, and repeat the same GPIO commands.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
pengu
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 16, 2015 04:20AM
changing the GPIOs .. no difference ...
booting with NSA310 dtb 

Uncompressing Linux... done, booting the kernel.                                                                                                  
[    0.000000] Booting Linux on physical CPU 0x0                                                                                                  
[    0.000000] Initializing cgroup subsys cpuset                                                                                                  
[    0.000000] Initializing cgroup subsys cpu                                                                                                     
[    0.000000] Initializing cgroup subsys cpuacct                                                                                                 
[    0.000000] Linux version 4.1.0-kirkwood-tld-2 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Sat Aug 8 14:44:53 PDT 2015  
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f                                                                 
[    0.000000] CPU: VIVT data cache, VIVT instruction cache                                                                                       
[    0.000000] Machine model: Zyxel NSA310S                                                                                                       
[    0.000000] Memory policy: Data cache writeback    
...

only one HDD comes up

yesterday I tried to connect the HDDs when the box is running and I saw the following:
on the one port on which every HDD is comming up, it's spinning up and you see in the logs that it's up ..
the other port .. is different ..
a 2,5'' HDD is coming up fine ...
all 3.5 '' HDDs doesn't spin up .. sometimes nothing is logged, sometimes it's detected shortly but after a
"EH complete" nothing more
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 16, 2015 05:29AM
pengu,

> the other port .. is different ..
> a 2,5'' HDD is coming up fine ...
> all 3.5 '' HDDs doesn't spin up .. sometimes
> nothing is logged, sometimes it's detected shortly
> but after a
> "EH complete" nothing more

It sounds like the 2nd port does not supply enough power for the 3.5" HDD. Have you tried to boot with either 2.5 or 3.5 HDD in the second port, but no HDD in the first port?

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
pengu
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 16, 2015 05:39AM
yes, with the same result

bodhi Wrote:
-------------------------------------------------------
> pengu,
>
> > the other port .. is different ..
> > a 2,5'' HDD is coming up fine ...
> > all 3.5 '' HDDs doesn't spin up .. sometimes
> > nothing is logged, sometimes it's detected
> shortly
> > but after a
> > "EH complete" nothing more
>
> It sounds like the 2nd port does not supply enough
> power for the 3.5" HDD. Have you tried to boot
> with either 2.5 or 3.5 HDD in the second port, but
> no HDD in the first port?
Reply Quote
osa
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 16, 2015 06:40AM
I have a 320 box with 2 4tb drives spinning slowly and fixed it by reseting ide from uboot (my kernel/initrd is in nand)
Reply Quote
pengu
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 16, 2015 07:36AM
as you can see, I've done this but nothing changed
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 16, 2015 08:18PM
pengu,

I will upload the new testing U-boot for nsa3x0s. You can try that.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 17, 2015 02:46AM
Please see this post for new u-boot:
http://forum.doozan.com/read.php?3,12381,23331,page=27#msg-23331

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 17, 2015 03:22AM
pengu,

Regarding testing the new u-boot:
http://forum.doozan.com/read.php?3,23039,23334#msg-23334

Did you try the working 3.5" HDD on the 2nd slot?

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
pengu
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 17, 2015 06:14AM
the same which is't working on stock U-Boot isn't working with this.
when connecting a 2,5 '' HDD it's working fine
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 17, 2015 03:38PM
Anybody else seeing this 2nd port problem? If you have the NSA320S, please try with only one 3.5" HDD in the 2nd port.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 18, 2015 04:39AM
@pengu,

This might be the same problem we've seen in the NSA325. Where the HDD2 needs to be brought up separately during boot.IIRC, believe this was the issue with 12V vs 5V voltage, which makes sense if the 2.5" HDD works fine.

There is such GPIO in the NSA320S DTS . And it's is a different GPIO from the NSA325's GPIO.

Boot into Debian with both 3.5" HDD installed. 
/bin/echo 33 > /sys/class/gpio/export
/bin/echo "out" > /sys/class/gpio/gpio33/direction 
/bin/echo 1 > /sys/class/gpio/gpio33/value

If this works, I will update the NSA310S/320S u-boot before releasing.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)



Edited 2 time(s). Last edit at 08/18/2015 04:47AM by bodhi.
Reply Quote
pengu
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 18, 2015 04:55AM
bodhi Wrote:
-------------------------------------------------------
> @pengu,
>
> This might be the same problem we've seen in the
> NSA325. Where the HDD2 needs to be brought up
> separately during boot.IIRC, believe this was the
> issue with 12V vs 5V voltage, which makes sense if
> the 2.5" HDD works fine.
>
> There is such GPIO in the NSA320S DTS . And it's
> is a different GPIO from the NSA325's GPIO.
>
> Boot into Debian with both 3.5" HDD installed.
> 
> /bin/echo 33 > /sys/class/gpio/export  <- device or resource busy 
> /bin/echo "out" > /sys/class/gpio/gpio33/direction  <- die directory doesn't exist 
> 
> /bin/echo 1 > /sys/class/gpio/gpio33/value <- the directory doesn't exist
>
>
> If this works, I will update the NSA310S/320S
> u-boot before releasing. 

/sys/class/gpio# ls
.  ..  export  gpiochip0  gpiochip32  unexport

root@debianNSA320s:/sys/class/gpio/gpiochip0# ls
.  ..  base  device  label  ngpio  power  subsystem  uevent
root@debianNSA320s:/sys/class/gpio/gpiochip0# 

root@debianNSA320s:/sys/class/gpio/gpiochip32# ls
.  ..  base  device  label  ngpio  power  subsystem  uevent

BTW: idt still doesn't power off

tried with NSA310s and NSA320s dtb, same result



Edited 2 time(s). Last edit at 08/18/2015 05:13AM by pengu.
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 18, 2015 05:22AM 
> /bin/echo 33 > /sys/class/gpio/export  <- device or resource busy

OK. Then we'll have to make it available. The more I think about it, the more it makes sense that the 12V voltage is the problem.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 18, 2015 05:55AM
@pengu,

Please try this u-boot with two 3.5" HDDs installed. 
kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2014.07-tld-4-test3.nsa310s.mtd0.kwb -p

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)



Edited 1 time(s). Last edit at 08/18/2015 05:56AM by bodhi.
Reply Quote
Attachments:
open | download - uboot.2014.07-tld-4-test-3.nsa310s.mtd0.kwb (512 KB)
pengu
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 18, 2015 06:07AM 

U-Boot 2014.07-tld-4-test-3 (Aug 18 2015 - 03:40:53)
ZyXEL NSA310S/320S 1/2-Bay Power Media Server

/bin/echo 33 > /sys/class/gpio/export <- device or resource busy

same with this U-Boot


Edit

when using NSA325 dtb, it's no longer busy



Edited 6 time(s). Last edit at 08/18/2015 08:49AM by pengu.
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 18, 2015 03:24PM
@pengu,

Here is another test version.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
Attachments:
open | download - uboot.2014.07-tld-4-test-4.nsa310s.mtd0.kwb (512 KB)
pengu
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 18, 2015 03:44PM 
U-Boot 2014.07-tld-4-test-4 (Aug 18 2015 - 13:07:41)
ZyXEL NSA310S/320S 1/2-Bay Power Media Server

SoC:   Kirkwood 88F6702_A1
DRAM:  256 MiB
WARNING: Caches not enabled
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
MV88E1318 PHY initialized on egiga0
Hit any key to stop autoboot:  0

/bin/echo 32 > /sys/class/gpio/export
/bin/echo "out" > /sys/class/gpio/gpio32/direction 
/bin/echo 1 > /sys/class/gpio/gpio32/value

/sys/class/gpio/gpio33 isn't there so I have modified this


no error messages but the HDD doesn't spin up



Edited 1 time(s). Last edit at 08/18/2015 03:48PM by pengu.
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 18, 2015 03:52PM
pengu Wrote:
-------------------------------------------------------
> 
> U-Boot 2014.07-tld-4-test-4 (Aug 18 2015 -
> 13:07:41)
> ZyXEL NSA310S/320S 1/2-Bay Power Media Server
> 
> SoC:   Kirkwood 88F6702_A1
> DRAM:  256 MiB
> WARNING: Caches not enabled
> NAND:  128 MiB
> In:    serial
> Out:   serial
> Err:   serial
> Net:   egiga0
> MV88E1318 PHY initialized on egiga0
> Hit any key to stop autoboot:  0 
>
>
> 
> /bin/echo 32 > /sys/class/gpio/export
> /bin/echo "out" > /sys/class/gpio/gpio32/direction
> 
> /bin/echo 1 > /sys/class/gpio/gpio32/value
>
>
> /sys/class/gpio/gpio33 isn't there so I have
> modified this
>
>
> no error messages but the HDD doesn't spin up

This test version tries to explicitly power up the 2nd HDD, so you should try "ide reset" in u-boot prompt. Let me know how it goes. The GPIO 33 could have been the wrong one to use.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
bodhi
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 18, 2015 03:58PM
pengu,

I have another version for you to try, if you're still awake :)

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
pengu
Re: NSA320s - cannot connect two 3,5 '' HDDs
August 18, 2015 04:03PM
after reboot .. nothing changed with only the one connectet that doesn't come up 

NSA3x0S> ide reset

Reset IDE: ide_preinit failed

yes I'm still awake ;-)



Edited 1 time(s). Last edit at 08/18/2015 04:04PM by pengu.
Reply Quote
Page 2 of 4    Pages: Previous1234Next
Newer Topic Older Topic
Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: