Installation problem of Linux Kernerl 4.6 on ix4-200d

Francesco,

>
> i've applied first option and work fine. Now for
> save the boot parameter in eeprom, what should I
> do?
>

1. Sanity check:

- Boot up with serial console again.
- Interrupt serialconsole
- Enter the evns like you did before
- Copy this serial console log to your note to reference it later
- Boot into Debian like before

2. Do it for real:

- Boot up with serial console again.
- Interrupt serialconsole
- Consult the log, copy/paste the evns like you did before

Before booting to Debian

saveenv

- If there is any error from the saveenv command execution, stop. And post the errors so we can see whether it is OK to continue.
- If there was no error, boot to Debian like before.

> While for first box (bricked) also with the linux
> OS doesn't execute the u-boot installation via
> kwboot, the command remains in trying.
>
>

> root@ubuntu:/mnt/hgfs/SecureCRT# kwboot -t -B
> 115200 /dev/ttyUSB0 -b mtd0.bin -p
> 
> Sending boot message. Please reboot the
> target...\
>

>
> The ubuntu linux syslog messages is empty and i
> have not found any error.

- Double check the serial header on the ix4.
- Connect with just serial console
- Power up

Is there any serial output coming out of this ix4?

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Hi Bodhi,

Is possible to manage embedded the display with this debian distro?

Thanks and regards
Francesco

Francesco,

I don't have this box so I'm not sure.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Hi Bodhi,

thanks a lot for your invaluable support.

Best regards
Francesco