GPIO reset button - debian Goflex Home

Hi friends,

I've installed successfull debian jessie on Goflex Home after upgrade uboot and install filesystem Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2. All Led gpio are working fine with default /etc/rc.local. Now I have another question, How can I get reset button (trigger GPIO) on Goflex Home working with debian jessie?

Many thanks

khongpt Wrote:
-------------------------------------------------------
> Hi friends,
>
> I've installed successfull debian jessie on Goflex
> Home after upgrade uboot and install filesystem
> Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2.
> All Led gpio are working fine with default
> /etc/rc.local. Now I have another question, How
> can I get reset button (trigger GPIO) on Goflex
> Home working with debian jessie?
>
> Many thanks

Currently the reset button is not defined on GoflexHome. I can't quite remember why I did not have it in the device tree :) please remind me, in about a week, to look at this again.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)



Edited 1 time(s). Last edit at 07/14/2016 12:53PM by bodhi.

Hi there!
I'm very happy if you have a free time to look again this option!

thanks

Hi khongpt,

The bad news: we don't know the GPIO number for the reset button on the GoFlex Home (nobody has tried to find out)! that's why I did not have the reset button defined in the DTS.

I think because stock FW has this enable, we should be able to figure this out. But I have not tried.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)