Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs

freestyle

Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
July 30, 2016 05:57PM

Registered: 7 years ago
Posts: 11

Hello,

I have a Netgear Stora and i try to run Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2

what is the u-boot env vars to the version "U-Boot 1.1.4 (Jul 31 2009 - 10:33:00) Marvell version: 3.4.14" for run USB rootfs?

Thankz

Edited 1 time(s). Last edit at 07/30/2016 06:22PM by bodhi.

Reply Quote

bodhi

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
July 30, 2016 06:23PM

Admin
Registered: 13 years ago
Posts: 18,543

freestyle Wrote:
-------------------------------------------------------
> Hello,
>
> I have a Netgear Stora and i try to run
> Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2
>
> what is the u-boot env vars to the version "U-Boot
> 1.1.4 (Jul 31 2009 - 10:33:00) Marvell version:
> 3.4.14" for run USB rootfs?
>
> Thankz

If you have serial console, interrupt it and get the listing of

printenv

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Reply Quote

freestyle

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
July 30, 2016 07:29PM

Registered: 7 years ago
Posts: 11

I interrup the normal boot and write this command

Quote
Command interactive mode
setenv bootargs $(console) root=/dev/sda1 rootdelay=8
usb reset
ext2load usb 0 0x200000 /boot/uImage
ext2load usb 0 0x800000 /boot/uInitrd
bootm 0x200000 0x800000

Quote
Kernel Panic
[ 2.490200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.497058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.504336] usb usb1: Product: EHCI Host Controller
[ 2.509240] usb usb1: Manufacturer: Linux 4.4.0-kirkwood-tld-1 ehci_hcd
[ 2.515905] usb usb1: SerialNumber: f1050000.ehci
[ 2.521532] hub 1-0:1.0: USB hub found
[ 2.525403] hub 1-0:1.0: 1 port detected
[ 2.530539] mousedev: PS/2 mouse device common for all mice
[ 2.843885] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 3.001078] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
[ 3.007851] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.015066] usb 1-1: Product: Mass Storage
[ 3.019185] usb 1-1: Manufacturer: Generic
[ 3.023300] usb 1-1: SerialNumber: F7AC80FA
[ 3.543886] rtc-mv f1010300.rtc: internal RTC not ticking
[ 3.549577] i2c /dev entries driver
[ 3.554278] rtc-pcf8563 0-0051: chip found, driver version 0.4.4
[ 3.566385] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
[ 3.576384] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.582278] drop_monitor: Initializing network drop monitor service
[ 3.588930] NET: Registered protocol family 17
[ 3.593719] Key type dns_resolver registered
[ 3.599054] registered taskstats version 1
[ 3.603231] Loading compiled-in X.509 certificates
[ 3.608156] zswap: loaded using pool lzo/zbud
[ 3.613825] Key type encrypted registered
[ 3.619812] rtc-pcf8563 0-0051: setting system clock to 2016-07-31 02:02:41 UTC (1469930561)
[ 3.630690] Waiting 8 sec before mounting root device...
[ 11.644077] VFS: Cannot open root device "sda1" or unknown-block(0,0): error -6
[ 11.651425] Please append a correct "root=" boot option; here are the available partitions:
[ 11.659881] 1f00 262144 mtdblock0 (driver?)
[ 11.665025] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 11.673334] CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0-kirkwood-tld-1 #1
[ 11.680322] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[ 11.686651] [<c0016784>] (unwind_backtrace) from [<c00129f8>] (show_stack+0x10/0x14)
[ 11.694444] [<c00129f8>] (show_stack) from [<c00c2200>] (panic+0x80/0x214)
[ 11.701360] [<c00c2200>] (panic) from [<c07d9280>] (mount_block_root+0x204/0x24c)
[ 11.708881] [<c07d9280>] (mount_block_root) from [<c07d93b4>] (mount_root+0xec/0x118)
[ 11.716755] [<c07d93b4>] (mount_root) from [<c07d9504>] (prepare_namespace+0x124/0x184)
[ 11.724803] [<c07d9504>] (prepare_namespace) from [<c07d8e9c>] (kernel_init_freeable+0x208/0x258)
[ 11.733728] [<c07d8e9c>] (kernel_init_freeable) from [<c05b16b4>] (kernel_init+0x8/0xe4)
[ 11.741862] [<c05b16b4>] (kernel_init) from [<c000f090>] (ret_from_fork+0x14/0x24)
[ 11.749473] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

Edited 1 time(s). Last edit at 07/30/2016 07:30PM by freestyle.

Reply Quote

bodhi

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
July 30, 2016 10:01PM

Admin
Registered: 13 years ago
Posts: 18,543

freestyle,

Please always post a completed bootlog, don't excerpt. There are very relevant info to troubleshoot in the entire log.

Let's go back to when you prepare the rootfs Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2. Were you root user the whole time? is the rootfs type ext3? is there a single partition? is the rootfs labeled rootfs?

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Edited 1 time(s). Last edit at 07/30/2016 10:02PM by bodhi.

Reply Quote

freestyle

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
July 31, 2016 05:29AM

Registered: 7 years ago
Posts: 11

Thanks for the answer.

Prepare the usb in linux box

# mkfs.ext3 -L rootfs /dev/sdb1 
# cd /media/usb
# tar -xjf ../../Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2
# nano etc/fstab    -> change ext2 by ext3 and save


# cd boot
# cp -a zImage-4.4.0-kirkwood-tld-1  zImage.fdt
# cat dts/kirkwood-netgear_stora_ms2000.dtb  >> zImage.fdt
# mv uImage uImage.orig
# mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.4.0-kirkwood-tld-1 -d zImage.fdt  uImage
# sync

Bootlog


         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_ 
| | | |___|  _ \ / _ \ / _ \| __| 
| |_| |___| |_) | (_) | (_) | |_ 
 \___/    |____/ \___/ \___/ \__| 
 ** MARVELL BOARD: RD-88F6281A LE 

U-Boot 1.1.4 (Sep  4 2009 - 09:36:11) Marvell version: 3.4.14

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE60

Soc: 88F6281 A0 (DDR2)
CPU running @ 1000Mhz L2 running @ 333Mhz
SysClock = 333Mhz , TClock = 200Mhz 

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size  64MB 
DRAM CS[1] base 0x04000000   size  64MB 
DRAM Total size 128MB  16bit width
Flash:  0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:256 MB
CRC in Flash: a52da09a, Calculated CRC: a52da09a

CPU : Marvell Feroceon (Rev 1)

Streaming disabled 
Write allocate disabled

Module 0 is RGMII
Module 1 is TDM

USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0, egiga1 [PRIME]
Hit any key to stop autoboot:  0 
(Re)start USB...
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
....
.
......
............
.........................
...................................................
......................................................................................................
........................................................................................................

3166745 bytes read
....
.
......
............
.........................
...................................................
......................................................................................................
............................................................................................................................................................................................................
....
..............................................................................................................................................................................................................................................................................................

7179935 bytes read
## Booting image at 00200000 ...
   Image Name:   Linux-4.4.0-kirkwood-tld-1
   Created:      2016-07-31   9:49:58 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3166681 Bytes =  3 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 00800000 ...
   Image Name:   initramfs-4.4.0-kirkwood-tld-1
   Created:      2016-02-19   7:33:04 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    7179871 Bytes =  6.8 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Mon Jan 25 20:35:24 PST 2016
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine model: NETGEAR MS2000 / MS2110 aka Stora
[    0.000000] INITRD: 0x00800040+0x006d8e5f overlaps in-use memory region - disabling initrd
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0xff00000@0x100000(root) root=/dev/sdb1 rootdelay=6 rootfstype=ext2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 120632K/131072K available (6007K kernel code, 573K rwdata, 1992K rodata, 296K init, 312K bss, 10440K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07d7ef4   (8000 kB)
[    0.000000]       .init : 0xc07d8000 - 0xc0822000   ( 296 kB)
[    0.000000]       .data : 0xc0822000 - 0xc08b169c   ( 574 kB)
[    0.000000]        .bss : 0xc08b169c - 0xc08ff9d0   ( 313 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000010] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000389] Console: colour dummy device 80x30
[    0.000427] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
[    0.090108] pid_max: default: 32768 minimum: 301
[    0.090241] Security Framework initialized
[    0.090333] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090358] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091302] Initializing cgroup subsys io
[    0.091344] Initializing cgroup subsys devices
[    0.091385] Initializing cgroup subsys freezer
[    0.091415] Initializing cgroup subsys net_cls
[    0.091511] CPU: Testing write buffer coherency: ok
[    0.092035] Setting up static identity map for 0x8200 - 0x8258
[    0.092410] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[    0.096767] devtmpfs: initialized
[    0.103108] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.103647] prandom: seed boundary self test passed
[    0.108153] prandom: 100 self tests passed
[    0.108181] pinctrl core: initialized pinctrl subsystem
[    0.109844] NET: Registered protocol family 16
[    0.110499] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.140126] cpuidle: using governor ladder
[    0.170123] cpuidle: using governor menu
[    0.170641] Feroceon L2: Enabling L2
[    0.170694] Feroceon L2: Cache support initialised.
[    0.171150] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[    0.177703] No ATAGs?
[    0.211891] vgaarb: loaded
[    0.212341] usbcore: registered new interface driver usbfs
[    0.212441] usbcore: registered new interface driver hub
[    0.212519] usbcore: registered new device driver usb
[    0.213864] clocksource: Switched to clocksource orion_clocksource
[    0.281091] NET: Registered protocol family 2
[    0.282025] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.282057] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.282083] TCP: Hash tables configured (established 1024 bind 1024)
[    0.282164] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.282192] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.282429] NET: Registered protocol family 1
[    0.282913] RPC: Registered named UNIX socket transport module.
[    0.282927] RPC: Registered udp transport module.
[    0.282936] RPC: Registered tcp transport module.
[    0.282945] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.283415] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.284789] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.284874] audit: initializing netlink subsys (disabled)
[    0.284927] audit: type=2000 audit(0.280:1): initialized
[    0.285346] Initialise system trusted keyring
[    0.285784] zbud: loaded
[    0.286128] VFS: Disk quotas dquot_6.6.0
[    0.286208] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.286869] NFS: Registering the id_resolver key type
[    0.286939] Key type id_resolver registered
[    0.286951] Key type id_legacy registered
[    0.286983] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.287000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.287271] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.287888] Key type big_key registered
[    0.301462] Key type asymmetric registered
[    0.301490] Asymmetric key parser 'x509' registered
[    0.301598] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.301624] io scheduler noop registered
[    0.301642] io scheduler deadline registered
[    0.301713] io scheduler cfq registered (default)
[    0.303317] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    0.304232] irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated
[    0.304765] irq: Cannot allocate irq_descs @ IRQ66, assuming pre-allocated
[    0.305776] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00
[    0.305800] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    0.305816] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    0.305832] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306305] PCI: bus0: Fast back to back transfers disabled
[    0.306335] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.306587] PCI: bus1: Fast back to back transfers enabled
[    0.306693] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.307088] mv_xor f1060800.xor: Marvell shared XOR driver
[    0.344715] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    0.344999] mv_xor f1060900.xor: Marvell shared XOR driver
[    0.384744] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    0.385337] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.387020] console [ttyS0] disabled
[    0.387090] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[    1.037867] console [ttyS0] enabled
[    1.042920] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
[    1.049427] nand: Samsung NAND 256MiB 3,3V 8-bit
[    1.054098] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.061723] Scanning device for bad blocks
[    1.116234] Bad eraseblock 468 at 0x000003a80000
[    1.134378] Bad eraseblock 594 at 0x000004a40000
[    1.139070] Bad eraseblock 595 at 0x000004a60000
[    1.206541] Bad eraseblock 1180 at 0x000009380000
[    1.211325] Bad eraseblock 1181 at 0x0000093a0000
[    1.222351] Bad eraseblock 1240 at 0x000009b00000
[    1.238220] Bad eraseblock 1344 at 0x00000a800000
[    1.243003] Bad eraseblock 1345 at 0x00000a820000
[    1.263484] Bad eraseblock 1492 at 0x00000ba80000
[    1.281825] Bad eraseblock 1619 at 0x00000ca60000
[    1.335665] libphy: Fixed MDIO Bus: probed
[    1.340167] libphy: orion_mdio_bus: probed
[    1.345246] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    2.422654] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c0:3f:0e:b0:e8:8a
[    2.431621] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.438241] ehci-pci: EHCI PCI platform driver
[    2.442796] ehci-orion: EHCI orion driver
[    2.447073] orion-ehci f1050000.ehci: EHCI Host Controller
[    2.452622] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[    2.460604] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[    2.483905] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[    2.490222] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.497079] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.504358] usb usb1: Product: EHCI Host Controller
[    2.509262] usb usb1: Manufacturer: Linux 4.4.0-kirkwood-tld-1 ehci_hcd
[    2.515928] usb usb1: SerialNumber: f1050000.ehci
[    2.521554] hub 1-0:1.0: USB hub found
[    2.525425] hub 1-0:1.0: 1 port detected
[    2.530555] mousedev: PS/2 mouse device common for all mice
[    2.843905] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    3.001115] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
[    3.007890] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.015104] usb 1-1: Product: Mass Storage
[    3.019224] usb 1-1: Manufacturer: Generic
[    3.023340] usb 1-1: SerialNumber: F7AC80FA
[    3.543908] rtc-mv f1010300.rtc: internal RTC not ticking
[    3.549597] i2c /dev entries driver
[    3.554300] rtc-pcf8563 0-0051: chip found, driver version 0.4.4
[    3.566413] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
[    3.576417] hidraw: raw HID events driver (C) Jiri Kosina
[    3.582302] drop_monitor: Initializing network drop monitor service
[    3.588950] NET: Registered protocol family 17
[    3.593751] Key type dns_resolver registered
[    3.599099] registered taskstats version 1
[    3.603272] Loading compiled-in X.509 certificates
[    3.608198] zswap: loaded using pool lzo/zbud
[    3.613929] Key type encrypted registered
[    3.619864] rtc-pcf8563 0-0051: setting system clock to 2016-07-31 12:02:29 UTC (1469966549)
[    3.630746] Waiting 6 sec before mounting root device...
[    9.644262] VFS: Cannot open root device "sdb1" or unknown-block(0,0): error -19
[    9.651698] Please append a correct "root=" boot option; here are the available partitions:
[    9.660162] 1f00          262144 mtdblock0  (driver?)
[    9.665306] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    9.673615] CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0-kirkwood-tld-1 #1
[    9.680603] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[    9.686933] [<c0016784>] (unwind_backtrace) from [<c00129f8>] (show_stack+0x10/0x14)
[    9.694725] [<c00129f8>] (show_stack) from [<c00c2200>] (panic+0x80/0x214)
[    9.701640] [<c00c2200>] (panic) from [<c07d9280>] (mount_block_root+0x204/0x24c)
[    9.709162] [<c07d9280>] (mount_block_root) from [<c07d93b4>] (mount_root+0xec/0x118)
[    9.717036] [<c07d93b4>] (mount_root) from [<c07d9504>] (prepare_namespace+0x124/0x184)
[    9.725084] [<c07d9504>] (prepare_namespace) from [<c07d8e9c>] (kernel_init_freeable+0x208/0x258)
[    9.734009] [<c07d8e9c>] (kernel_init_freeable) from [<c05b16b4>] (kernel_init+0x8/0xe4)
[    9.742145] [<c05b16b4>] (kernel_init) from [<c000f090>] (ret_from_fork+0x14/0x24)
[    9.749755] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[   85.163896] random: nonblocking pool is initialized

Printenv


         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|
 ** MARVELL BOARD: RD-88F6281A LE

U-Boot 1.1.4 (Sep  4 2009 - 09:36:11) Marvell version: 3.4.14

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE60

Soc: 88F6281 A0 (DDR2)
CPU running @ 1000Mhz L2 running @ 333Mhz
SysClock = 333Mhz , TClock = 200Mhz

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size  64MB
DRAM CS[1] base 0x04000000   size  64MB
DRAM Total size 128MB  16bit width
Flash:  0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:256 MB
CRC in Flash: a52da09a, Calculated CRC: a52da09a

CPU : Marvell Feroceon (Rev 1)

Streaming disabled
Write allocate disabled

Module 0 is RGMII
Module 1 is TDM

USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0, egiga1 [PRIME]
Hit any key to stop autoboot:  0
Marvell>> printenv
baudrate=115200
loads_echo=0
ipaddr=10.4.50.165
serverip=10.4.50.5
rootpath=/mnt/ARM_FS/
netmask=255.255.255.0
CASset=min
MALLOC_len=1
ethprime=egiga1
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
ethmtu=1500
eth1addr=00:50:43:00:02:02
eth1mtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
nandEcc=1bit
netretry=no
rcvrip=169.254.100.100
loidaddr=0x02000000
autoload=no
bootargs_root=ubi.mtd=2,2048 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc
mainlineLiNux=no
fw_up=disable
ethaddr=C0:3F:0E:B0:E8:8A
loadaddr=0x02000000
arcNumber=2743
bootcmd_usb=usb reset; ext2load usb 0 0x200000 /boot/uImage; ext2load usb 0 0x800000 /boot/uInitrd
console=console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0xff00000@0x100000(root)
bootcmd=setenv bootargs $(console) root=/dev/sdb1 rootdelay=6 rootfstype=ext2; run bootcmd_usb; bootm 0x200000 0x800000
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=yes
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
bootdelay=3
disaMvPnp=no
hddPowerCtrl=no
enaAutoRecovery=no
ethact=egiga1

Environment size: 1446/131068 bytes
Marvell>>

I try with /dev/sda1, /dev/sdb1, /dev/root, what is the correct? where is the mistake?

Thank you for your time and knowledge!

Reply Quote

bodhi

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
July 31, 2016 08:16AM

Admin
Registered: 13 years ago
Posts: 18,543

Use root=LABEL=rootfs in bootargs, dont use the drive letlter sda1,sdb1....

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Reply Quote

freestyle

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
July 31, 2016 12:14PM

Registered: 7 years ago
Posts: 11

A new attempt

         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_ 
| | | |___|  _ \ / _ \ / _ \| __| 
| |_| |___| |_) | (_) | (_) | |_ 
 \___/    |____/ \___/ \___/ \__| 
 ** MARVELL BOARD: RD-88F6281A LE 

U-Boot 1.1.4 (Sep  4 2009 - 09:36:11) Marvell version: 3.4.14

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE60

Soc: 88F6281 A0 (DDR2)
CPU running @ 1000Mhz L2 running @ 333Mhz
SysClock = 333Mhz , TClock = 200Mhz 

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size  64MB 
DRAM CS[1] base 0x04000000   size  64MB 
DRAM Total size 128MB  16bit width
Flash:  0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:256 MB
CRC in Flash: a52da09a, Calculated CRC: a52da09a

CPU : Marvell Feroceon (Rev 1)

Streaming disabled 
Write allocate disabled

Module 0 is RGMII
Module 1 is TDM

USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0, egiga1 [PRIME]
Hit any key to stop autoboot:  3  2  0 
Marvell>> printenv

baudrate=115200
loads_echo=0
ipaddr=10.4.50.165
serverip=10.4.50.5
rootpath=/mnt/ARM_FS/
netmask=255.255.255.0
CASset=min
MALLOC_len=1
ethprime=egiga1
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
ethmtu=1500
eth1addr=00:50:43:00:02:02
eth1mtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
nandEcc=1bit
netretry=no
rcvrip=169.254.100.100
loidaddr=0x02000000
autoload=no
bootargs_root=ubi.mtd=2,2048 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc
mainlineLiNux=no
fw_up=disable
ethaddr=C0:3F:0E:B0:E8:8A
loadaddr=0x02000000
arcNumber=2743
bootcmd_usb=usb reset; ext2load usb 0 0x200000 /boot/uImage; ext2load usb 0 0x800000 /boot/uInitrd
console=console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0xff00000@0x100000(root)
bootcmd=setenv bootargs $(console) root=/dev/sdb1 rootdelay=6 rootfstype=ext2; run bootcmd_usb; bootm 0x200000 0x800000
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=yes
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
bootdelay=3
disaMvPnp=no
hddPowerCtrl=no
enaAutoRecovery=no
ethact=egiga1

Environment size: 1446/131068 bytes
Marvell>> setenv bootcmd 'setenv bootargs $(console) root=LABEL=rootfs rootdelay=8 rootfstype=ext2; run bootcmd_usb; bootm 0x200000 0x800000'

Marvell>> saveenv

Saving Environment to NAND...
Erasing Nand...Writing to Nand... done
Marvell>> run bootcmd

(Re)start USB...
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
....
.
......
............
.........................
...................................................
......................................................................................................
........................................................................................................

3166745 bytes read
....
.
......
............
.........................
...................................................
......................................................................................................
............................................................................................................................................................................................................
....
..............................................................................................................................................................................................................................................................................................

7179935 bytes read
## Booting image at 00200000 ...
   Image Name:   Linux-4.4.0-kirkwood-tld-1
   Created:      2016-07-31   9:49:58 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3166681 Bytes =  3 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 00800000 ...
   Image Name:   initramfs-4.4.0-kirkwood-tld-1
   Created:      2016-02-19   7:33:04 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    7179871 Bytes =  6.8 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Mon Jan 25 20:35:24 PST 2016
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine model: NETGEAR MS2000 / MS2110 aka Stora
[    0.000000] INITRD: 0x00800040+0x006d8e5f overlaps in-use memory region - disabling initrd
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0xff00000@0x100000(root) root=LABEL=rootfs rootdelay=8 rootfstype=ext2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 120632K/131072K available (6007K kernel code, 573K rwdata, 1992K rodata, 296K init, 312K bss, 10440K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07d7ef4   (8000 kB)
[    0.000000]       .init : 0xc07d8000 - 0xc0822000   ( 296 kB)
[    0.000000]       .data : 0xc0822000 - 0xc08b169c   ( 574 kB)
[    0.000000]        .bss : 0xc08b169c - 0xc08ff9d0   ( 313 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000010] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000388] Console: colour dummy device 80x30
[    0.000426] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
[    0.090109] pid_max: default: 32768 minimum: 301
[    0.090240] Security Framework initialized
[    0.090330] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090353] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091302] Initializing cgroup subsys io
[    0.091343] Initializing cgroup subsys devices
[    0.091386] Initializing cgroup subsys freezer
[    0.091415] Initializing cgroup subsys net_cls
[    0.091513] CPU: Testing write buffer coherency: ok
[    0.092035] Setting up static identity map for 0x8200 - 0x8258
[    0.092410] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[    0.096779] devtmpfs: initialized
[    0.103108] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.103644] prandom: seed boundary self test passed
[    0.108149] prandom: 100 self tests passed
[    0.108181] pinctrl core: initialized pinctrl subsystem
[    0.109831] NET: Registered protocol family 16
[    0.110483] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.140123] cpuidle: using governor ladder
[    0.170120] cpuidle: using governor menu
[    0.170641] Feroceon L2: Enabling L2
[    0.170695] Feroceon L2: Cache support initialised.
[    0.171150] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[    0.177712] No ATAGs?
[    0.211883] vgaarb: loaded
[    0.212331] usbcore: registered new interface driver usbfs
[    0.212431] usbcore: registered new interface driver hub
[    0.212508] usbcore: registered new device driver usb
[    0.213854] clocksource: Switched to clocksource orion_clocksource
[    0.281081] NET: Registered protocol family 2
[    0.282020] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.282053] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.282078] TCP: Hash tables configured (established 1024 bind 1024)
[    0.282159] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.282187] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.282422] NET: Registered protocol family 1
[    0.282905] RPC: Registered named UNIX socket transport module.
[    0.282920] RPC: Registered udp transport module.
[    0.282929] RPC: Registered tcp transport module.
[    0.282938] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.283406] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.284777] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.284866] audit: initializing netlink subsys (disabled)
[    0.284919] audit: type=2000 audit(0.280:1): initialized
[    0.285341] Initialise system trusted keyring
[    0.285776] zbud: loaded
[    0.286122] VFS: Disk quotas dquot_6.6.0
[    0.286200] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.286862] NFS: Registering the id_resolver key type
[    0.286931] Key type id_resolver registered
[    0.286943] Key type id_legacy registered
[    0.286973] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.286991] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.287262] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.287881] Key type big_key registered
[    0.301449] Key type asymmetric registered
[    0.301476] Asymmetric key parser 'x509' registered
[    0.301585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.301610] io scheduler noop registered
[    0.301629] io scheduler deadline registered
[    0.301701] io scheduler cfq registered (default)
[    0.303311] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    0.304225] irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated
[    0.304757] irq: Cannot allocate irq_descs @ IRQ66, assuming pre-allocated
[    0.305770] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00
[    0.305794] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    0.305811] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    0.305828] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306305] PCI: bus0: Fast back to back transfers disabled
[    0.306336] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.306587] PCI: bus1: Fast back to back transfers enabled
[    0.306693] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.307088] mv_xor f1060800.xor: Marvell shared XOR driver
[    0.344697] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    0.344980] mv_xor f1060900.xor: Marvell shared XOR driver
[    0.384732] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    0.385325] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.387007] console [ttyS0] disabled
[    0.387079] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[    1.038171] console [ttyS0] enabled
[    1.043220] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
[    1.049730] nand: Samsung NAND 256MiB 3,3V 8-bit
[    1.054400] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.062025] Scanning device for bad blocks
[    1.116526] Bad eraseblock 468 at 0x000003a80000
[    1.134661] Bad eraseblock 594 at 0x000004a40000
[    1.139357] Bad eraseblock 595 at 0x000004a60000
[    1.206835] Bad eraseblock 1180 at 0x000009380000
[    1.211619] Bad eraseblock 1181 at 0x0000093a0000
[    1.222640] Bad eraseblock 1240 at 0x000009b00000
[    1.238506] Bad eraseblock 1344 at 0x00000a800000
[    1.243289] Bad eraseblock 1345 at 0x00000a820000
[    1.263769] Bad eraseblock 1492 at 0x00000ba80000
[    1.282106] Bad eraseblock 1619 at 0x00000ca60000
[    1.335942] libphy: Fixed MDIO Bus: probed
[    1.340444] libphy: orion_mdio_bus: probed
[    1.345489] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    2.422679] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c0:3f:0e:b0:e8:8a
[    2.431645] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.438267] ehci-pci: EHCI PCI platform driver
[    2.442821] ehci-orion: EHCI orion driver
[    2.447093] orion-ehci f1050000.ehci: EHCI Host Controller
[    2.452644] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[    2.460619] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[    2.483893] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[    2.490208] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.497069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.504347] usb usb1: Product: EHCI Host Controller
[    2.509252] usb usb1: Manufacturer: Linux 4.4.0-kirkwood-tld-1 ehci_hcd
[    2.515918] usb usb1: SerialNumber: f1050000.ehci
[    2.521546] hub 1-0:1.0: USB hub found
[    2.525423] hub 1-0:1.0: 1 port detected
[    2.530559] mousedev: PS/2 mouse device common for all mice
[    2.843894] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    3.001128] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
[    3.007905] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.015121] usb 1-1: Product: Mass Storage
[    3.019240] usb 1-1: Manufacturer: Generic
[    3.023355] usb 1-1: SerialNumber: F7AC80FA
[    3.543897] rtc-mv f1010300.rtc: internal RTC not ticking
[    3.549587] i2c /dev entries driver
[    3.554290] rtc-pcf8563 0-0051: chip found, driver version 0.4.4
[    3.566398] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
[    3.576397] hidraw: raw HID events driver (C) Jiri Kosina
[    3.582285] drop_monitor: Initializing network drop monitor service
[    3.588930] NET: Registered protocol family 17
[    3.593712] Key type dns_resolver registered
[    3.599063] registered taskstats version 1
[    3.603234] Loading compiled-in X.509 certificates
[    3.608161] zswap: loaded using pool lzo/zbud
[    3.613836] Key type encrypted registered
[    3.619828] rtc-pcf8563 0-0051: setting system clock to 2016-07-31 18:51:19 UTC (1469991079)
[    3.630714] Waiting 8 sec before mounting root device...
[   11.644253] VFS: Cannot open root device "LABEL=rootfs" or unknown-block(0,0): error -19
[   11.652387] Please append a correct "root=" boot option; here are the available partitions:
[   11.660852] 1f00          262144 mtdblock0  (driver?)
[   11.665995] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[   11.674304] CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0-kirkwood-tld-1 #1
[   11.681292] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[   11.687621] [<c0016784>] (unwind_backtrace) from [<c00129f8>] (show_stack+0x10/0x14)
[   11.695414] [<c00129f8>] (show_stack) from [<c00c2200>] (panic+0x80/0x214)
[   11.702329] [<c00c2200>] (panic) from [<c07d9280>] (mount_block_root+0x204/0x24c)
[   11.709852] [<c07d9280>] (mount_block_root) from [<c07d93b4>] (mount_root+0xec/0x118)
[   11.717725] [<c07d93b4>] (mount_root) from [<c07d9504>] (prepare_namespace+0x124/0x184)
[   11.725774] [<c07d9504>] (prepare_namespace) from [<c07d8e9c>] (kernel_init_freeable+0x208/0x258)
[   11.734699] [<c07d8e9c>] (kernel_init_freeable) from [<c05b16b4>] (kernel_init+0x8/0xe4)
[   11.742833] [<c05b16b4>] (kernel_init) from [<c000f090>] (ret_from_fork+0x14/0x24)
[   11.750443] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[   85.923883] random: nonblocking pool is initialized

Reply Quote

bodhi

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
July 31, 2016 01:55PM

Admin
Registered: 13 years ago
Posts: 18,543

Try in serial console

setenv bootcmd_usb 'usb start; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x1100000 /boot/uInitrd
setenv bootcmd 'setenv bootargs $(console) root=LABEL=rootfs rootdelay=10; run bootcmd_usb; bootm 0x800000 0x1100000; reset'
boot

And pls post the log here.

There is more to do in your u-boot envs. But let's get you boot the rootfs into Debian first and we'll come back to that.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Edited 1 time(s). Last edit at 07/31/2016 01:59PM by bodhi.

Reply Quote

freestyle

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
July 31, 2016 04:39PM

Registered: 7 years ago
Posts: 11

Congratulations!!, now boot correctly!

        __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_ 
| | | |___|  _ \ / _ \ / _ \| __| 
| |_| |___| |_) | (_) | (_) | |_ 
 \___/    |____/ \___/ \___/ \__| 
 ** MARVELL BOARD: RD-88F6281A LE 

U-Boot 1.1.4 (Sep  4 2009 - 09:36:11) Marvell version: 3.4.14

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE60

Soc: 88F6281 A0 (DDR2)
CPU running @ 1000Mhz L2 running @ 333Mhz
SysClock = 333Mhz , TClock = 200Mhz 

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size  64MB 
DRAM CS[1] base 0x04000000   size  64MB 
DRAM Total size 128MB  16bit width
Flash:  0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:256 MB
CRC in Flash: ac06e162, Calculated CRC: ac06e162

CPU : Marvell Feroceon (Rev 1)

Streaming disabled 
Write allocate disabled

Module 0 is RGMII
Module 1 is TDM

USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0, egiga1 [PRIME]
Hit any key to stop autoboot:  0 
Marvell>> setenv bootcmd_usb 'usb start; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x1100000 /boot/uInitrd
Marvell>> setenv bootcmd 'setenv bootargs $(console) root=LABEL=rootfs rootdelay=10; run bootcmd_usb; bootm 0x800000 0x1100000; reset'
Marvell>> boot
(Re)start USB...
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
....
.
......
............
.........................
...................................................
......................................................................................................
........................................................................................................

3166745 bytes read
....
.
......
............
.........................
...................................................
......................................................................................................
............................................................................................................................................................................................................
....
..............................................................................................................................................................................................................................................................................................

7179935 bytes read
## Booting image at 00800000 ...
   Image Name:   Linux-4.4.0-kirkwood-tld-1
   Created:      2016-07-31   9:49:58 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3166681 Bytes =  3 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 01100000 ...
   Image Name:   initramfs-4.4.0-kirkwood-tld-1
   Created:      2016-02-19   7:33:04 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    7179871 Bytes =  6.8 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Mon Jan 25 20:35:24 PST 2016
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine model: NETGEAR MS2000 / MS2110 aka Stora
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0xff00000@0x100000(root) root=LABEL=rootfs rootdelay=10
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 113620K/131072K available (6007K kernel code, 573K rwdata, 1992K rodata, 296K init, 312K bss, 17452K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07d7ef4   (8000 kB)
[    0.000000]       .init : 0xc07d8000 - 0xc0822000   ( 296 kB)
[    0.000000]       .data : 0xc0822000 - 0xc08b169c   ( 574 kB)
[    0.000000]        .bss : 0xc08b169c - 0xc08ff9d0   ( 313 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000010] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000390] Console: colour dummy device 80x30
[    0.000427] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
[    0.090108] pid_max: default: 32768 minimum: 301
[    0.090238] Security Framework initialized
[    0.090325] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090350] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091294] Initializing cgroup subsys io
[    0.091336] Initializing cgroup subsys devices
[    0.091378] Initializing cgroup subsys freezer
[    0.091409] Initializing cgroup subsys net_cls
[    0.091507] CPU: Testing write buffer coherency: ok
[    0.092029] Setting up static identity map for 0x8200 - 0x8258
[    0.092402] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[    0.096760] devtmpfs: initialized
[    0.103039] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.103580] prandom: seed boundary self test passed
[    0.108087] prandom: 100 self tests passed
[    0.108117] pinctrl core: initialized pinctrl subsystem
[    0.109768] NET: Registered protocol family 16
[    0.110399] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.140127] cpuidle: using governor ladder
[    0.170120] cpuidle: using governor menu
[    0.170617] Feroceon L2: Enabling L2
[    0.170671] Feroceon L2: Cache support initialised.
[    0.171126] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[    0.177687] No ATAGs?
[    0.211887] vgaarb: loaded
[    0.212335] usbcore: registered new interface driver usbfs
[    0.212435] usbcore: registered new interface driver hub
[    0.212511] usbcore: registered new device driver usb
[    0.213834] clocksource: Switched to clocksource orion_clocksource
[    0.281060] NET: Registered protocol family 2
[    0.282000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.282033] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.282057] TCP: Hash tables configured (established 1024 bind 1024)
[    0.282139] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.282167] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.282405] NET: Registered protocol family 1
[    0.282888] RPC: Registered named UNIX socket transport module.
[    0.282904] RPC: Registered udp transport module.
[    0.282913] RPC: Registered tcp transport module.
[    0.282922] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.283251] Unpacking initramfs...
[    1.046740] Freeing initrd memory: 7012K (c1100000 - c17d9000)
[    1.046888] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.048213] futex hash table entries: 256 (order: -1, 3072 bytes)
[    1.048300] audit: initializing netlink subsys (disabled)
[    1.048360] audit: type=2000 audit(1.040:1): initialized
[    1.048790] Initialise system trusted keyring
[    1.049259] zbud: loaded
[    1.049611] VFS: Disk quotas dquot_6.6.0
[    1.049682] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.050339] NFS: Registering the id_resolver key type
[    1.050398] Key type id_resolver registered
[    1.050410] Key type id_legacy registered
[    1.050441] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.050458] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.050728] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.051360] Key type big_key registered
[    1.075565] Key type asymmetric registered
[    1.075593] Asymmetric key parser 'x509' registered
[    1.075709] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.075735] io scheduler noop registered
[    1.075754] io scheduler deadline registered
[    1.075827] io scheduler cfq registered (default)
[    1.077449] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    1.078272] irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated
[    1.078798] irq: Cannot allocate irq_descs @ IRQ66, assuming pre-allocated
[    1.079823] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00
[    1.079847] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    1.079863] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    1.079880] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.080355] PCI: bus0: Fast back to back transfers disabled
[    1.080387] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.080639] PCI: bus1: Fast back to back transfers enabled
[    1.080747] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.081148] mv_xor f1060800.xor: Marvell shared XOR driver
[    1.114700] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.114996] mv_xor f1060900.xor: Marvell shared XOR driver
[    1.154661] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.155277] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.156980] console [ttyS0] disabled
[    1.157058] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[    1.807799] console [ttyS0] enabled
[    1.812833] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
[    1.819260] nand: Samsung NAND 256MiB 3,3V 8-bit
[    1.823925] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.831548] Scanning device for bad blocks
[    1.885992] Bad eraseblock 468 at 0x000003a80000
[    1.904132] Bad eraseblock 594 at 0x000004a40000
[    1.908826] Bad eraseblock 595 at 0x000004a60000
[    1.976219] Bad eraseblock 1180 at 0x000009380000
[    1.981003] Bad eraseblock 1181 at 0x0000093a0000
[    1.992018] Bad eraseblock 1240 at 0x000009b00000
[    2.007880] Bad eraseblock 1344 at 0x00000a800000
[    2.012664] Bad eraseblock 1345 at 0x00000a820000
[    2.033140] Bad eraseblock 1492 at 0x00000ba80000
[    2.051547] Bad eraseblock 1619 at 0x00000ca60000
[    2.110162] libphy: Fixed MDIO Bus: probed
[    2.114813] libphy: orion_mdio_bus: probed
[    2.124712] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    3.202675] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c0:3f:0e:b0:e8:8a
[    3.211642] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.218264] ehci-pci: EHCI PCI platform driver
[    3.222815] ehci-orion: EHCI orion driver
[    3.227090] orion-ehci f1050000.ehci: EHCI Host Controller
[    3.232640] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[    3.240624] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[    3.263874] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[    3.270202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.277064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.284345] usb usb1: Product: EHCI Host Controller
[    3.289246] usb usb1: Manufacturer: Linux 4.4.0-kirkwood-tld-1 ehci_hcd
[    3.295913] usb usb1: SerialNumber: f1050000.ehci
[    3.301554] hub 1-0:1.0: USB hub found
[    3.305426] hub 1-0:1.0: 1 port detected
[    3.310567] mousedev: PS/2 mouse device common for all mice
[    3.623876] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    3.781132] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
[    3.787908] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.795116] usb 1-1: Product: Mass Storage
[    3.799236] usb 1-1: Manufacturer: Generic
[    3.803350] usb 1-1: SerialNumber: F7AC80FA
[    4.323875] rtc-mv f1010300.rtc: internal RTC not ticking
[    4.329568] i2c /dev entries driver
[    4.334298] rtc-pcf8563 0-0051: chip found, driver version 0.4.4
[    4.346408] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
[    4.356418] hidraw: raw HID events driver (C) Jiri Kosina
[    4.362307] drop_monitor: Initializing network drop monitor service
[    4.368959] NET: Registered protocol family 17
[    4.373756] Key type dns_resolver registered
[    4.379096] registered taskstats version 1
[    4.383274] Loading compiled-in X.509 certificates
[    4.388193] zswap: loaded using pool lzo/zbud
[    4.402885] Key type encrypted registered
[    4.408957] rtc-pcf8563 0-0051: setting system clock to 2016-07-31 23:12:47 UTC (1470006767)
[    4.420839] Freeing unused kernel memory: 296K (c07d8000 - c0822000)
Loading, please wait...
[    4.510620] systemd-udevd[81]: starting version 215
[    4.526524] random: systemd-udevd urandom read with 8 bits of entropy available
[    4.733740] SCSI subsystem initialized
[    4.768184] usb-storage 1-1:1.0: USB Mass Storage device detected
[    4.802016] sata_mv f1080000.sata: slots 32 ports 2
[    4.831899] scsi host0: usb-storage 1-1:1.0
[    4.846958] usbcore: registered new interface driver usb-storage
[    4.864064] scsi host1: sata_mv
[    4.879439] scsi host2: sata_mv
[    4.883040] ata1: SATA max UDMA/133 irq 33
[    4.891266] usbcore: registered new interface driver uas
[    4.915438] ata2: SATA max UDMA/133 irq 33
[    5.263886] ata1: SATA link down (SStatus 0 SControl F300)
[    5.633874] ata2: SATA link down (SStatus 0 SControl F300)
[    5.846248] scsi 0:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 4
[    5.862963] sd 0:0:0:0: [sda] 16099328 512-byte logical blocks: (8.24 GB/7.67 GiB)
[    5.874438] sd 0:0:0:0: [sda] Write Protect is off
[    5.880169] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    5.896312]  sda: sda1
[    5.903046] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    5.913349] sd 0:0:0:0: Attached scsi generic sg0 type 0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
modprobe: module ext3 not found in modules.dep
Begin: Checking root file system ... fsck from util-linux 2.25.2
fsck: error 2 (No such file or directory) while executing fsck.ext3 for /dev/sda1
fsck exited with status code 8
done.
Warning: File system check failed but did not detect errors
[   20.886346] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   20.904139] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[   22.295284] systemd-udevd[293]: starting version 215
. ok 
[....] Synthesizing the initial hotplug events...[   22.636871] input: gpio-keys as /devices/platform/gpio-keys/input/input0
done.
[....] Waiting for /dev to be fully populated...[   22.885770] lm75 0-0048: hwmon0: sensor 'lm75'
[   22.925530] marvell-cesa: probe of f1030000.crypto failed with error -524
[   22.954568] orion_wdt: Initial timeout 21 sec
[   23.057142] random: nonblocking pool is initialized
done.
[ ok ] Activating swap...done.
[   24.179852] EXT4-fs (sda1): re-mounted. Opts: (null)
[....] Checking root file system...fsck from util-linux 2.25.2
rootfs: clean, 14516/503936 files, 167688/2012160 blocks
done.
[   24.404244] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.25.2
done.
[ ok ] Loading kernel modules...done.
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[   27.360578] NET: Registered protocol family 10
[   28.547842] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.1
Copyright 2004-2014 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/c0:3f:0e:b0:e8:8a
Sending on   LPF/eth0/c0:3f:0e:b0:e8:8a
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
done.
[ ok ] Starting rpcbind daemon....
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1216 (syslogd)
. ok 
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Starting system message bus: dbus.
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting NTP server: ntpd.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1218 (klogd)
. ok 

Debian GNU/Linux 8 debian ttyS0

debian login: root
Password: 
Last login: Fri Feb 19 20:08:26 PST 2016 from 192.168.0.100 on pts/0
Linux debian 4.4.0-kirkwood-tld-1 #1 PREEMPT Mon Jan 25 20:35:24 PST 2016 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~# uname -a
Linux debian 4.4.0-kirkwood-tld-1 #1 PREEMPT Mon Jan 25 20:35:24 PST 2016 armv5tel GNU

Whats is the problem? what is the next step?

Thankz

Reply Quote

bodhi

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 01, 2016 02:23AM

Admin
Registered: 13 years ago
Posts: 18,543

Everything looks good.

Your current env for mtdparts is:

console=console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0xff00000@0x100000(root)

So when you list the envs in Debian, you probably got some errors

fw_printenv

mtdparts should be

console=console=ttyS0,115200 mtdparts=orion_nand:0xc0000@0(uboot)ro,0xff00000@0x100000(root)

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Reply Quote

freestyle

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 01, 2016 06:39AM

Registered: 7 years ago
Posts: 11

Yes, there are errors

Debian GNU/Linux 8 debian ttyS0

debian login: root
Password: 
Last login: Sun Jul 31 16:15:43 PDT 2016 on ttyS0
Linux debian 4.4.0-kirkwood-tld-1 #1 PREEMPT Mon Jan 25 20:35:24 PST 2016 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~# fw_printenv
[  173.254927] __nand_correct_data: uncorrectable ECC error
[  173.260273] __nand_correct_data: uncorrectable ECC error
[  173.266077] __nand_correct_data: uncorrectable ECC error
[  173.271415] __nand_correct_data: uncorrectable ECC error
[  173.277141] __nand_correct_data: uncorrectable ECC error
[  173.282481] __nand_correct_data: uncorrectable ECC error
[  173.288129] __nand_correct_data: uncorrectable ECC error
[  173.293484] __nand_correct_data: uncorrectable ECC error
[  173.299536] __nand_correct_data: uncorrectable ECC error
[  173.304901] __nand_correct_data: uncorrectable ECC error
[  173.310236] __nand_correct_data: uncorrectable ECC error
[  173.315954] __nand_correct_data: uncorrectable ECC error
[  173.321293] __nand_correct_data: uncorrectable ECC error
[  173.326928] __nand_correct_data: uncorrectable ECC error
[  173.332271] __nand_correct_data: uncorrectable ECC error
[  173.337903] __nand_correct_data: uncorrectable ECC error
[  173.343660] __nand_correct_data: uncorrectable ECC error
[  173.349298] __nand_correct_data: uncorrectable ECC error
[  173.354665] __nand_correct_data: uncorrectable ECC error
[  173.360000] __nand_correct_data: uncorrectable ECC error
[  173.365705] __nand_correct_data: uncorrectable ECC error
[  173.371040] __nand_correct_data: uncorrectable ECC error
[  173.376673] __nand_correct_data: uncorrectable ECC error
[  173.382010] __nand_correct_data: uncorrectable ECC error
[  173.388060] __nand_correct_data: uncorrectable ECC error
[  173.393399] __nand_correct_data: uncorrectable ECC error
[  173.399033] __nand_correct_data: uncorrectable ECC error
[  173.404396] __nand_correct_data: uncorrectable ECC error
[  173.409730] __nand_correct_data: uncorrectable ECC error
[  173.415432] __nand_correct_data: uncorrectable ECC error
[  173.420771] __nand_correct_data: uncorrectable ECC error
[  173.426404] __nand_correct_data: uncorrectable ECC error
[  173.432160] __nand_correct_data: uncorrectable ECC error
[  173.437794] __nand_correct_data: uncorrectable ECC error
[  173.443138] __nand_correct_data: uncorrectable ECC error
[  173.448771] __nand_correct_data: uncorrectable ECC error
[  173.454134] __nand_correct_data: uncorrectable ECC error
[  173.459470] __nand_correct_data: uncorrectable ECC error
[  173.465172] __nand_correct_data: uncorrectable ECC error
[  173.470510] __nand_correct_data: uncorrectable ECC error
[  173.476559] __nand_correct_data: uncorrectable ECC error
[  173.481899] __nand_correct_data: uncorrectable ECC error
[  173.487533] __nand_correct_data: uncorrectable ECC error
[  173.492868] __nand_correct_data: uncorrectable ECC error
[  173.498500] __nand_correct_data: uncorrectable ECC error
[  173.503865] __nand_correct_data: uncorrectable ECC error
[  173.509200] __nand_correct_data: uncorrectable ECC error
[  173.514903] __nand_correct_data: uncorrectable ECC error
[  173.520658] __nand_correct_data: uncorrectable ECC error
[  173.526294] __nand_correct_data: uncorrectable ECC error
[  173.531637] __nand_correct_data: uncorrectable ECC error
[  173.537269] __nand_correct_data: uncorrectable ECC error
[  173.542606] __nand_correct_data: uncorrectable ECC error
[  173.548237] __nand_correct_data: uncorrectable ECC error
[  173.553576] __nand_correct_data: uncorrectable ECC error
[  173.559207] __nand_correct_data: uncorrectable ECC error
[  173.564991] __nand_correct_data: uncorrectable ECC error
[  173.570328] __nand_correct_data: uncorrectable ECC error
[  173.576035] __nand_correct_data: uncorrectable ECC error
[  173.581375] __nand_correct_data: uncorrectable ECC error
[  173.587017] __nand_correct_data: uncorrectable ECC error
[  173.592354] __nand_correct_data: uncorrectable ECC error
[  173.597987] __nand_correct_data: uncorrectable ECC error
[  173.603323] __nand_correct_data: uncorrectable ECC error
[  173.609374] __nand_correct_data: uncorrectable ECC error
[  173.614739] __nand_correct_data: uncorrectable ECC error
[  173.620075] __nand_correct_data: uncorrectable ECC error
[  173.625782] __nand_correct_data: uncorrectable ECC error
[  173.631123] __nand_correct_data: uncorrectable ECC error
[  173.636755] __nand_correct_data: uncorrectable ECC error
[  173.642093] __nand_correct_data: uncorrectable ECC error
[  173.647725] __nand_correct_data: uncorrectable ECC error
[  173.653482] __nand_correct_data: uncorrectable ECC error
[  173.659115] __nand_correct_data: uncorrectable ECC error
[  173.664477] __nand_correct_data: uncorrectable ECC error
[  173.669813] __nand_correct_data: uncorrectable ECC error
[  173.675515] __nand_correct_data: uncorrectable ECC error
[  173.680853] __nand_correct_data: uncorrectable ECC error
[  173.686486] __nand_correct_data: uncorrectable ECC error
[  173.691823] __nand_correct_data: uncorrectable ECC error
[  173.697873] __nand_correct_data: uncorrectable ECC error
[  173.703211] __nand_correct_data: uncorrectable ECC error
[  173.708965] __nand_correct_data: uncorrectable ECC error
[  173.714336] __nand_correct_data: uncorrectable ECC error
[  173.719674] __nand_correct_data: uncorrectable ECC error
[  173.725386] __nand_correct_data: uncorrectable ECC error
[  173.730723] __nand_correct_data: uncorrectable ECC error
[  173.736357] __nand_correct_data: uncorrectable ECC error
[  173.742113] __nand_correct_data: uncorrectable ECC error
[  173.747747] __nand_correct_data: uncorrectable ECC error
[  173.753090] __nand_correct_data: uncorrectable ECC error
[  173.758722] __nand_correct_data: uncorrectable ECC error
[  173.764087] __nand_correct_data: uncorrectable ECC error
[  173.769421] __nand_correct_data: uncorrectable ECC error
[  173.775124] __nand_correct_data: uncorrectable ECC error
[  173.780462] __nand_correct_data: uncorrectable ECC error
[  173.786514] __nand_correct_data: uncorrectable ECC error
[  173.791851] __nand_correct_data: uncorrectable ECC error
[  173.797485] __nand_correct_data: uncorrectable ECC error
[  173.802820] __nand_correct_data: uncorrectable ECC error
[  173.808453] __nand_correct_data: uncorrectable ECC error
[  173.813789] __nand_correct_data: uncorrectable ECC error
[  173.819420] __nand_correct_data: uncorrectable ECC error
[  173.824786] __nand_correct_data: uncorrectable ECC error
[  173.830540] __nand_correct_data: uncorrectable ECC error
[  173.836248] __nand_correct_data: uncorrectable ECC error
[  173.841589] __nand_correct_data: uncorrectable ECC error
[  173.847220] __nand_correct_data: uncorrectable ECC error
[  173.852560] __nand_correct_data: uncorrectable ECC error
[  173.858190] __nand_correct_data: uncorrectable ECC error
[  173.863529] __nand_correct_data: uncorrectable ECC error
[  173.869160] __nand_correct_data: uncorrectable ECC error
[  173.874944] __nand_correct_data: uncorrectable ECC error
[  173.880280] __nand_correct_data: uncorrectable ECC error
[  173.885985] __nand_correct_data: uncorrectable ECC error
[  173.891328] __nand_correct_data: uncorrectable ECC error
[  173.896962] __nand_correct_data: uncorrectable ECC error
[  173.902297] __nand_correct_data: uncorrectable ECC error
[  173.907930] __nand_correct_data: uncorrectable ECC error
[  173.913268] __nand_correct_data: uncorrectable ECC error
[  173.919320] __nand_correct_data: uncorrectable ECC error
[  173.924683] __nand_correct_data: uncorrectable ECC error
[  173.930018] __nand_correct_data: uncorrectable ECC error
[  173.935723] __nand_correct_data: uncorrectable ECC error
[  173.941059] __nand_correct_data: uncorrectable ECC error
[  173.946690] __nand_correct_data: uncorrectable ECC error
[  173.952028] __nand_correct_data: uncorrectable ECC error
[  173.957659] __nand_correct_data: uncorrectable ECC error
[  173.963417] __nand_correct_data: uncorrectable ECC error
[  173.969048] __nand_correct_data: uncorrectable ECC error
[  173.974413] __nand_correct_data: uncorrectable ECC error
[  173.979748] __nand_correct_data: uncorrectable ECC error
[  173.985451] __nand_correct_data: uncorrectable ECC error
[  173.990789] __nand_correct_data: uncorrectable ECC error
[  173.996420] __nand_correct_data: uncorrectable ECC error
[  174.001758] __nand_correct_data: uncorrectable ECC error
[  174.007807] __nand_correct_data: uncorrectable ECC error
[  174.013147] __nand_correct_data: uncorrectable ECC error
[  174.018782] __nand_correct_data: uncorrectable ECC error
[  174.024143] __nand_correct_data: uncorrectable ECC error
[  174.029479] __nand_correct_data: uncorrectable ECC error
[  174.035180] __nand_correct_data: uncorrectable ECC error
[  174.040519] __nand_correct_data: uncorrectable ECC error
[  174.046236] __nand_correct_data: uncorrectable ECC error
[  174.051995] __nand_correct_data: uncorrectable ECC error
[  174.057639] __nand_correct_data: uncorrectable ECC error
[  174.062982] __nand_correct_data: uncorrectable ECC error
[  174.068617] __nand_correct_data: uncorrectable ECC error
[  174.073987] __nand_correct_data: uncorrectable ECC error
[  174.079322] __nand_correct_data: uncorrectable ECC error
[  174.085023] __nand_correct_data: uncorrectable ECC error
[  174.090363] __nand_correct_data: uncorrectable ECC error
[  174.096412] __nand_correct_data: uncorrectable ECC error
[  174.101750] __nand_correct_data: uncorrectable ECC error
[  174.107386] __nand_correct_data: uncorrectable ECC error
[  174.112728] __nand_correct_data: uncorrectable ECC error
[  174.118362] __nand_correct_data: uncorrectable ECC error
[  174.123699] __nand_correct_data: uncorrectable ECC error
[  174.129330] __nand_correct_data: uncorrectable ECC error
[  174.134695] __nand_correct_data: uncorrectable ECC error
[  174.140450] __nand_correct_data: uncorrectable ECC error
[  174.146163] __nand_correct_data: uncorrectable ECC error
[  174.151498] __nand_correct_data: uncorrectable ECC error
[  174.157131] __nand_correct_data: uncorrectable ECC error
[  174.162468] __nand_correct_data: uncorrectable ECC error
[  174.168099] __nand_correct_data: uncorrectable ECC error
[  174.173438] __nand_correct_data: uncorrectable ECC error
[  174.179070] __nand_correct_data: uncorrectable ECC error
[  174.184853] __nand_correct_data: uncorrectable ECC error
[  174.190189] __nand_correct_data: uncorrectable ECC error
[  174.195957] __nand_correct_data: uncorrectable ECC error
[  174.201329] __nand_correct_data: uncorrectable ECC error
[  174.207018] __nand_correct_data: uncorrectable ECC error
[  174.212386] __nand_correct_data: uncorrectable ECC error
[  174.218045] __nand_correct_data: uncorrectable ECC error
[  174.223385] __nand_correct_data: uncorrectable ECC error
[  174.229438] __nand_correct_data: uncorrectable ECC error
[  174.234801] __nand_correct_data: uncorrectable ECC error
[  174.240137] __nand_correct_data: uncorrectable ECC error
[  174.245844] __nand_correct_data: uncorrectable ECC error
[  174.251185] __nand_correct_data: uncorrectable ECC error
[  174.256816] __nand_correct_data: uncorrectable ECC error
[  174.262155] __nand_correct_data: uncorrectable ECC error
[  174.267786] __nand_correct_data: uncorrectable ECC error
[  174.273543] __nand_correct_data: uncorrectable ECC error
[  174.279179] __nand_correct_data: uncorrectable ECC error
[  174.284549] __nand_correct_data: uncorrectable ECC error
[  174.289884] __nand_correct_data: uncorrectable ECC error
[  174.295585] __nand_correct_data: uncorrectable ECC error
[  174.300924] __nand_correct_data: uncorrectable ECC error
[  174.306556] __nand_correct_data: uncorrectable ECC error
[  174.311894] __nand_correct_data: uncorrectable ECC error
[  174.317944] __nand_correct_data: uncorrectable ECC error
[  174.323282] __nand_correct_data: uncorrectable ECC error
[  174.328917] __nand_correct_data: uncorrectable ECC error
[  174.334279] __nand_correct_data: uncorrectable ECC error
[  174.339614] __nand_correct_data: uncorrectable ECC error
[  174.345317] __nand_correct_data: uncorrectable ECC error
[  174.350654] __nand_correct_data: uncorrectable ECC error
[  174.356288] __nand_correct_data: uncorrectable ECC error
[  174.362043] __nand_correct_data: uncorrectable ECC error
[  174.367676] __nand_correct_data: uncorrectable ECC error
[  174.373012] __nand_correct_data: uncorrectable ECC error
[  174.378645] __nand_correct_data: uncorrectable ECC error
[  174.384009] __nand_correct_data: uncorrectable ECC error
[  174.389345] __nand_correct_data: uncorrectable ECC error
[  174.395046] __nand_correct_data: uncorrectable ECC error
[  174.400385] __nand_correct_data: uncorrectable ECC error
[  174.406435] __nand_correct_data: uncorrectable ECC error
[  174.411772] __nand_correct_data: uncorrectable ECC error
[  174.417405] __nand_correct_data: uncorrectable ECC error
[  174.422742] __nand_correct_data: uncorrectable ECC error
[  174.428374] __nand_correct_data: uncorrectable ECC error
[  174.433713] __nand_correct_data: uncorrectable ECC error
[  174.439348] __nand_correct_data: uncorrectable ECC error
[  174.444717] __nand_correct_data: uncorrectable ECC error
[  174.450472] __nand_correct_data: uncorrectable ECC error
[  174.456180] __nand_correct_data: uncorrectable ECC error
[  174.461520] __nand_correct_data: uncorrectable ECC error
[  174.467153] __nand_correct_data: uncorrectable ECC error
[  174.472490] __nand_correct_data: uncorrectable ECC error
[  174.478228] __nand_correct_data: uncorrectable ECC error
[  174.483625] __nand_correct_data: uncorrectable ECC error
[  174.489374] __nand_correct_data: uncorrectable ECC error
[  174.495193] __nand_correct_data: uncorrectable ECC error
[  174.500533] __nand_correct_data: uncorrectable ECC error
[  174.506277] __nand_correct_data: uncorrectable ECC error
[  174.511617] __nand_correct_data: uncorrectable ECC error
[  174.517260] __nand_correct_data: uncorrectable ECC error
[  174.522611] __nand_correct_data: uncorrectable ECC error
[  174.528243] __nand_correct_data: uncorrectable ECC error
[  174.533582] __nand_correct_data: uncorrectable ECC error
[  174.539634] __nand_correct_data: uncorrectable ECC error
[  174.544998] __nand_correct_data: uncorrectable ECC error
[  174.550334] __nand_correct_data: uncorrectable ECC error
[  174.556038] __nand_correct_data: uncorrectable ECC error
[  174.561373] __nand_correct_data: uncorrectable ECC error
[  174.567008] __nand_correct_data: uncorrectable ECC error
[  174.572342] __nand_correct_data: uncorrectable ECC error
[  174.577976] __nand_correct_data: uncorrectable ECC error
[  174.583745] __nand_correct_data: uncorrectable ECC error
[  174.589380] __nand_correct_data: uncorrectable ECC error
[  174.594745] __nand_correct_data: uncorrectable ECC error
[  174.600080] __nand_correct_data: uncorrectable ECC error
[  174.605784] __nand_correct_data: uncorrectable ECC error
[  174.611120] __nand_correct_data: uncorrectable ECC error
[  174.616752] __nand_correct_data: uncorrectable ECC error
[  174.622090] __nand_correct_data: uncorrectable ECC error
[  174.628142] __nand_correct_data: uncorrectable ECC error
[  174.633478] __nand_correct_data: uncorrectable ECC error
[  174.639111] __nand_correct_data: uncorrectable ECC error
[  174.644475] __nand_correct_data: uncorrectable ECC error
[  174.649811] __nand_correct_data: uncorrectable ECC error
[  174.655511] __nand_correct_data: uncorrectable ECC error
[  174.660851] __nand_correct_data: uncorrectable ECC error
[  174.666482] __nand_correct_data: uncorrectable ECC error
[  174.672240] __nand_correct_data: uncorrectable ECC error
[  174.677872] __nand_correct_data: uncorrectable ECC error
[  174.683209] __nand_correct_data: uncorrectable ECC error
[  174.688841] __nand_correct_data: uncorrectable ECC error
[  174.694205] __nand_correct_data: uncorrectable ECC error
[  174.699541] __nand_correct_data: uncorrectable ECC error
[  174.705241] __nand_correct_data: uncorrectable ECC error
[  174.710716] __nand_correct_data: uncorrectable ECC error
[  174.716787] __nand_correct_data: uncorrectable ECC error
[  174.722126] __nand_correct_data: uncorrectable ECC error
[  174.727766] __nand_correct_data: uncorrectable ECC error
[  174.733104] __nand_correct_data: uncorrectable ECC error
[  174.738738] __nand_correct_data: uncorrectable ECC error
[  174.744101] __nand_correct_data: uncorrectable ECC error
[  174.749436] __nand_correct_data: uncorrectable ECC error
[  174.755141] __nand_correct_data: uncorrectable ECC error
[  174.760896] __nand_correct_data: uncorrectable ECC error
[  174.766529] __nand_correct_data: uncorrectable ECC error
[  174.771865] __nand_correct_data: uncorrectable ECC error
[  174.777498] __nand_correct_data: uncorrectable ECC error
[  174.782834] __nand_correct_data: uncorrectable ECC error
[  174.788466] __nand_correct_data: uncorrectable ECC error
[  174.793805] __nand_correct_data: uncorrectable ECC error
[  174.799436] __nand_correct_data: uncorrectable ECC error
[  174.805219] __nand_correct_data: uncorrectable ECC error
[  174.810555] __nand_correct_data: uncorrectable ECC error
[  174.816262] __nand_correct_data: uncorrectable ECC error
[  174.821604] __nand_correct_data: uncorrectable ECC error
[  174.827235] __nand_correct_data: uncorrectable ECC error
[  174.832574] __nand_correct_data: uncorrectable ECC error
[  174.838205] __nand_correct_data: uncorrectable ECC error
[  174.843543] __nand_correct_data: uncorrectable ECC error
[  174.849594] __nand_correct_data: uncorrectable ECC error
[  174.854960] __nand_correct_data: uncorrectable ECC error
[  174.860294] __nand_correct_data: uncorrectable ECC error
[  174.865999] __nand_correct_data: uncorrectable ECC error
[  174.871335] __nand_correct_data: uncorrectable ECC error
[  174.876967] __nand_correct_data: uncorrectable ECC error
[  174.882303] __nand_correct_data: uncorrectable ECC error
[  174.887934] __nand_correct_data: uncorrectable ECC error
[  174.893692] __nand_correct_data: uncorrectable ECC error
[  174.899327] __nand_correct_data: uncorrectable ECC error
[  174.904689] __nand_correct_data: uncorrectable ECC error
[  174.910024] __nand_correct_data: uncorrectable ECC error
[  174.915723] __nand_correct_data: uncorrectable ECC error
[  174.921064] __nand_correct_data: uncorrectable ECC error
[  174.926696] __nand_correct_data: uncorrectable ECC error
[  174.932034] __nand_correct_data: uncorrectable ECC error
[  174.938084] __nand_correct_data: uncorrectable ECC error
[  174.943423] __nand_correct_data: uncorrectable ECC error
[  174.949057] __nand_correct_data: uncorrectable ECC error
[  174.954418] __nand_correct_data: uncorrectable ECC error
[  174.959754] __nand_correct_data: uncorrectable ECC error
[  174.965455] __nand_correct_data: uncorrectable ECC error
[  174.970794] __nand_correct_data: uncorrectable ECC error
[  174.976425] __nand_correct_data: uncorrectable ECC error
[  174.982183] __nand_correct_data: uncorrectable ECC error
[  174.987817] __nand_correct_data: uncorrectable ECC error
[  174.993153] __nand_correct_data: uncorrectable ECC error
[  174.998786] __nand_correct_data: uncorrectable ECC error
[  175.004149] __nand_correct_data: uncorrectable ECC error
[  175.009485] __nand_correct_data: uncorrectable ECC error
[  175.015185] __nand_correct_data: uncorrectable ECC error
[  175.020525] __nand_correct_data: uncorrectable ECC error
[  175.026574] __nand_correct_data: uncorrectable ECC error
[  175.031913] __nand_correct_data: uncorrectable ECC error
[  175.037547] __nand_correct_data: uncorrectable ECC error
[  175.042883] __nand_correct_data: uncorrectable ECC error
[  175.048515] __nand_correct_data: uncorrectable ECC error
[  175.053880] __nand_correct_data: uncorrectable ECC error
[  175.059215] __nand_correct_data: uncorrectable ECC error
[  175.064917] __nand_correct_data: uncorrectable ECC error
[  175.070674] __nand_correct_data: uncorrectable ECC error
[  175.076306] __nand_correct_data: uncorrectable ECC error
[  175.081643] __nand_correct_data: uncorrectable ECC error
[  175.087274] __nand_correct_data: uncorrectable ECC error
[  175.092613] __nand_correct_data: uncorrectable ECC error
[  175.098243] __nand_correct_data: uncorrectable ECC error
[  175.103582] __nand_correct_data: uncorrectable ECC error
[  175.109213] __nand_correct_data: uncorrectable ECC error
[  175.114998] __nand_correct_data: uncorrectable ECC error
[  175.120333] __nand_correct_data: uncorrectable ECC error
[  175.126039] __nand_correct_data: uncorrectable ECC error
[  175.131381] __nand_correct_data: uncorrectable ECC error
[  175.137017] __nand_correct_data: uncorrectable ECC error
[  175.142352] __nand_correct_data: uncorrectable ECC error
[  175.147983] __nand_correct_data: uncorrectable ECC error
[  175.153321] __nand_correct_data: uncorrectable ECC error
[  175.159372] __nand_correct_data: uncorrectable ECC error
[  175.164738] __nand_correct_data: uncorrectable ECC error
[  175.170072] __nand_correct_data: uncorrectable ECC error
[  175.175778] __nand_correct_data: uncorrectable ECC error
[  175.181121] __nand_correct_data: uncorrectable ECC error
[  175.186751] __nand_correct_data: uncorrectable ECC error
[  175.192091] __nand_correct_data: uncorrectable ECC error
[  175.197722] __nand_correct_data: uncorrectable ECC error
[  175.203479] __nand_correct_data: uncorrectable ECC error
[  175.209112] __nand_correct_data: uncorrectable ECC error
[  175.214507] __nand_correct_data: uncorrectable ECC error
[  175.219873] __nand_correct_data: uncorrectable ECC error
[  175.225637] __nand_correct_data: uncorrectable ECC error
[  175.231004] __nand_correct_data: uncorrectable ECC error
[  175.236694] __nand_correct_data: uncorrectable ECC error
[  175.242030] __nand_correct_data: uncorrectable ECC error
[  175.248083] __nand_correct_data: uncorrectable ECC error
[  175.253418] __nand_correct_data: uncorrectable ECC error
[  175.259053] __nand_correct_data: uncorrectable ECC error
[  175.264424] __nand_correct_data: uncorrectable ECC error
[  175.269759] __nand_correct_data: uncorrectable ECC error
[  175.275462] __nand_correct_data: uncorrectable ECC error
[  175.280799] __nand_correct_data: uncorrectable ECC error
[  175.286439] __nand_correct_data: uncorrectable ECC error
[  175.292196] __nand_correct_data: uncorrectable ECC error
[  175.297831] __nand_correct_data: uncorrectable ECC error
[  175.303174] __nand_correct_data: uncorrectable ECC error
[  175.308807] __nand_correct_data: uncorrectable ECC error
[  175.314171] __nand_correct_data: uncorrectable ECC error
[  175.319507] __nand_correct_data: uncorrectable ECC error
[  175.325208] __nand_correct_data: uncorrectable ECC error
[  175.330547] __nand_correct_data: uncorrectable ECC error
[  175.336604] __nand_correct_data: uncorrectable ECC error
[  175.341944] __nand_correct_data: uncorrectable ECC error
[  175.347580] __nand_correct_data: uncorrectable ECC error
[  175.352922] __nand_correct_data: uncorrectable ECC error
[  175.358555] __nand_correct_data: uncorrectable ECC error
[  175.363919] __nand_correct_data: uncorrectable ECC error
[  175.369254] __nand_correct_data: uncorrectable ECC error
[  175.374959] __nand_correct_data: uncorrectable ECC error
[  175.380713] __nand_correct_data: uncorrectable ECC error
[  175.386348] __nand_correct_data: uncorrectable ECC error
[  175.391682] __nand_correct_data: uncorrectable ECC error
[  175.397315] __nand_correct_data: uncorrectable ECC error
[  175.402653] __nand_correct_data: uncorrectable ECC error
[  175.408289] __nand_correct_data: uncorrectable ECC error
[  175.413630] __nand_correct_data: uncorrectable ECC error
[  175.419263] __nand_correct_data: uncorrectable ECC error
[  175.425045] __nand_correct_data: uncorrectable ECC error
[  175.430382] __nand_correct_data: uncorrectable ECC error
[  175.436087] __nand_correct_data: uncorrectable ECC error
[  175.441430] __nand_correct_data: uncorrectable ECC error
[  175.447061] __nand_correct_data: uncorrectable ECC error
[  175.452400] __nand_correct_data: uncorrectable ECC error
[  175.458032] __nand_correct_data: uncorrectable ECC error
[  175.463369] __nand_correct_data: uncorrectable ECC error
[  175.469421] __nand_correct_data: uncorrectable ECC error
[  175.474786] __nand_correct_data: uncorrectable ECC error
[  175.480121] __nand_correct_data: uncorrectable ECC error
[  175.485826] __nand_correct_data: uncorrectable ECC error
[  175.491160] __nand_correct_data: uncorrectable ECC error
[  175.496792] __nand_correct_data: uncorrectable ECC error
[  175.502131] __nand_correct_data: uncorrectable ECC error
[  175.507761] __nand_correct_data: uncorrectable ECC error
[  175.513519] __nand_correct_data: uncorrectable ECC error
[  175.519153] __nand_correct_data: uncorrectable ECC error
[  175.524515] __nand_correct_data: uncorrectable ECC error
[  175.529850] __nand_correct_data: uncorrectable ECC error
[  175.535550] __nand_correct_data: uncorrectable ECC error
[  175.540891] __nand_correct_data: uncorrectable ECC error
[  175.546522] __nand_correct_data: uncorrectable ECC error
[  175.551860] __nand_correct_data: uncorrectable ECC error
[  175.557909] __nand_correct_data: uncorrectable ECC error
[  175.563249] __nand_correct_data: uncorrectable ECC error
[  175.568883] __nand_correct_data: uncorrectable ECC error
[  175.574245] __nand_correct_data: uncorrectable ECC error
[  175.579580] __nand_correct_data: uncorrectable ECC error
[  175.585282] __nand_correct_data: uncorrectable ECC error
[  175.590621] __nand_correct_data: uncorrectable ECC error
[  175.596252] __nand_correct_data: uncorrectable ECC error
[  175.602009] __nand_correct_data: uncorrectable ECC error
[  175.607642] __nand_correct_data: uncorrectable ECC error
[  175.612979] __nand_correct_data: uncorrectable ECC error
[  175.618610] __nand_correct_data: uncorrectable ECC error
[  175.623979] __nand_correct_data: uncorrectable ECC error
[  175.629320] __nand_correct_data: uncorrectable ECC error
[  175.635022] __nand_correct_data: uncorrectable ECC error
[  175.640359] __nand_correct_data: uncorrectable ECC error
[  175.646411] __nand_correct_data: uncorrectable ECC error
[  175.651748] __nand_correct_data: uncorrectable ECC error
[  175.657381] __nand_correct_data: uncorrectable ECC error
[  175.662718] __nand_correct_data: uncorrectable ECC error
[  175.668349] __nand_correct_data: uncorrectable ECC error
[  175.673687] __nand_correct_data: uncorrectable ECC error
[  175.679319] __nand_correct_data: uncorrectable ECC error
[  175.684683] __nand_correct_data: uncorrectable ECC error
[  175.690439] __nand_correct_data: uncorrectable ECC error
[  175.696148] __nand_correct_data: uncorrectable ECC error
[  175.701487] __nand_correct_data: uncorrectable ECC error
[  175.707222] __nand_correct_data: uncorrectable ECC error
[  175.712561] __nand_correct_data: uncorrectable ECC error
[  175.718204] __nand_correct_data: uncorrectable ECC error
[  175.723540] __nand_correct_data: uncorrectable ECC error
[  175.729173] __nand_correct_data: uncorrectable ECC error
[  175.734956] __nand_correct_data: uncorrectable ECC error
[  175.740290] __nand_correct_data: uncorrectable ECC error
[  175.745997] __nand_correct_data: uncorrectable ECC error
[  175.751339] __nand_correct_data: uncorrectable ECC error
[  175.756973] __nand_correct_data: uncorrectable ECC error
[  175.762308] __nand_correct_data: uncorrectable ECC error
[  175.767942] __nand_correct_data: uncorrectable ECC error
[  175.773278] __nand_correct_data: uncorrectable ECC error
[  175.779330] __nand_correct_data: uncorrectable ECC error
[  175.784694] __nand_correct_data: uncorrectable ECC error
[  175.790030] __nand_correct_data: uncorrectable ECC error
[  175.795735] __nand_correct_data: uncorrectable ECC error
[  175.801078] __nand_correct_data: uncorrectable ECC error
[  175.806710] __nand_correct_data: uncorrectable ECC error
[  175.812047] __nand_correct_data: uncorrectable ECC error
[  175.817679] __nand_correct_data: uncorrectable ECC error
[  175.823436] __nand_correct_data: uncorrectable ECC error
[  175.829069] __nand_correct_data: uncorrectable ECC error
[  175.834432] __nand_correct_data: uncorrectable ECC error
[  175.839768] __nand_correct_data: uncorrectable ECC error
[  175.845471] __nand_correct_data: uncorrectable ECC error
[  175.850809] __nand_correct_data: uncorrectable ECC error
[  175.856439] __nand_correct_data: uncorrectable ECC error
[  175.861777] __nand_correct_data: uncorrectable ECC error
[  175.867829] __nand_correct_data: uncorrectable ECC error
[  175.873166] __nand_correct_data: uncorrectable ECC error
[  175.878802] __nand_correct_data: uncorrectable ECC error
[  175.884172] __nand_correct_data: uncorrectable ECC error
[  175.889507] __nand_correct_data: uncorrectable ECC error
[  175.895210] __nand_correct_data: uncorrectable ECC error
[  175.900547] __nand_correct_data: uncorrectable ECC error
[  175.906178] __nand_correct_data: uncorrectable ECC error
[  175.911936] __nand_correct_data: uncorrectable ECC error
[  175.917569] __nand_correct_data: uncorrectable ECC error
[  175.922905] __nand_correct_data: uncorrectable ECC error
[  175.928542] __nand_correct_data: uncorrectable ECC error
[  175.933910] __nand_correct_data: uncorrectable ECC error
[  175.939245] __nand_correct_data: uncorrectable ECC error
[  175.944947] __nand_correct_data: uncorrectable ECC error
[  175.950286] __nand_correct_data: uncorrectable ECC error
[  175.956337] __nand_correct_data: uncorrectable ECC error
[  175.961674] __nand_correct_data: uncorrectable ECC error
[  175.967310] __nand_correct_data: uncorrectable ECC error
[  175.972652] __nand_correct_data: uncorrectable ECC error
[  175.978286] __nand_correct_data: uncorrectable ECC error
[  175.983623] __nand_correct_data: uncorrectable ECC error
[  175.989254] __nand_correct_data: uncorrectable ECC error
[  175.994619] __nand_correct_data: uncorrectable ECC error
[  176.000373] __nand_correct_data: uncorrectable ECC error
[  176.006080] __nand_correct_data: uncorrectable ECC error
[  176.011421] __nand_correct_data: uncorrectable ECC error
[  176.017055] __nand_correct_data: uncorrectable ECC error
[  176.022392] __nand_correct_data: uncorrectable ECC error
[  176.028022] __nand_correct_data: uncorrectable ECC error
[  176.033361] __nand_correct_data: uncorrectable ECC error
[  176.038992] __nand_correct_data: uncorrectable ECC error
[  176.044883] __nand_correct_data: uncorrectable ECC error
[  176.050217] __nand_correct_data: uncorrectable ECC error
[  176.055942] __nand_correct_data: uncorrectable ECC error
[  176.061282] __nand_correct_data: uncorrectable ECC error
[  176.066924] __nand_correct_data: uncorrectable ECC error
[  176.072261] __nand_correct_data: uncorrectable ECC error
[  176.077895] __nand_correct_data: uncorrectable ECC error
[  176.083231] __nand_correct_data: uncorrectable ECC error
Warning: Bad CRC, using default environment
bootargs=
bootcmd=bootp; setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm
bootdelay=3
baudrate=115200
stdin=serial,cros-ec-keyb
stdout=serial,lcd
stderr=serial,lcd

How to solve this?

Thank

Reply Quote

bodhi

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 01, 2016 12:10PM

Admin
Registered: 13 years ago
Posts: 18,543

freestyle,

Post outtput of

dmesg
cat /proc/mtd
cat /etc/fw_env.config

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Reply Quote

freestyle

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 01, 2016 03:32PM

Registered: 7 years ago
Posts: 11

Thank you for de answer, this is the result

Debian GNU/Linux 8 debian ttyS0

debian login: root
Password: 
Last login: Mon Aug  1 06:15:54 PDT 2016 on ttyS0
Linux debian 4.4.0-kirkwood-tld-1 #1 PREEMPT Mon Jan 25 20:35:24 PST 2016 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Mon Jan 25 20:35:24 PST 2016
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine model: NETGEAR MS2000 / MS2110 aka Stora
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c08a06b4, node_mem_map c7ef9000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0xff00000@0x100000(root) root=LABEL=rootfs rootdelay=10
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 113620K/131072K available (6007K kernel code, 573K rwdata, 1992K rodata, 296K init, 312K bss, 17452K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc07d7ef4   (8000 kB)
      .init : 0xc07d8000 - 0xc0822000   ( 296 kB)
      .data : 0xc0822000 - 0xc08b169c   ( 574 kB)
       .bss : 0xc08b169c - 0xc08ff9d0   ( 313 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000010] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000390] Console: colour dummy device 80x30
[    0.000427] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
[    0.090108] pid_max: default: 32768 minimum: 301
[    0.090237] Security Framework initialized
[    0.090325] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090350] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091295] Initializing cgroup subsys io
[    0.091336] Initializing cgroup subsys devices
[    0.091379] Initializing cgroup subsys freezer
[    0.091410] Initializing cgroup subsys net_cls
[    0.091508] CPU: Testing write buffer coherency: ok
[    0.092029] Setting up static identity map for 0x8200 - 0x8258
[    0.092402] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[    0.096760] devtmpfs: initialized
[    0.103038] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.103579] prandom: seed boundary self test passed
[    0.108085] prandom: 100 self tests passed
[    0.108116] pinctrl core: initialized pinctrl subsystem
[    0.109782] NET: Registered protocol family 16
[    0.110415] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.140126] cpuidle: using governor ladder
[    0.170122] cpuidle: using governor menu
[    0.170617] Feroceon L2: Enabling L2
[    0.170671] Feroceon L2: Cache support initialised.
[    0.171126] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[    0.177686] No ATAGs?
[    0.211888] vgaarb: loaded
[    0.212337] usbcore: registered new interface driver usbfs
[    0.212437] usbcore: registered new interface driver hub
[    0.212513] usbcore: registered new device driver usb
[    0.213834] clocksource: Switched to clocksource orion_clocksource
[    0.281065] NET: Registered protocol family 2
[    0.282005] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.282037] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.282061] TCP: Hash tables configured (established 1024 bind 1024)
[    0.282141] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.282169] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.282405] NET: Registered protocol family 1
[    0.282888] RPC: Registered named UNIX socket transport module.
[    0.282903] RPC: Registered udp transport module.
[    0.282912] RPC: Registered tcp transport module.
[    0.282921] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.282947] PCI: CLS 0 bytes, default 32
[    0.283257] Unpacking initramfs...
[    1.046796] Freeing initrd memory: 7012K (c1100000 - c17d9000)
[    1.046945] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.048280] futex hash table entries: 256 (order: -1, 3072 bytes)
[    1.048369] audit: initializing netlink subsys (disabled)
[    1.048428] audit: type=2000 audit(1.040:1): initialized
[    1.048856] Initialise system trusted keyring
[    1.049311] zbud: loaded
[    1.049669] VFS: Disk quotas dquot_6.6.0
[    1.049740] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.050399] NFS: Registering the id_resolver key type
[    1.050451] Key type id_resolver registered
[    1.050463] Key type id_legacy registered
[    1.050494] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.050511] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.050780] jffs2: version 2.2. (NAND) (SUMMARY)  \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
[    1.051413] Key type big_key registered
[    1.075597] Key type asymmetric registered
[    1.075626] Asymmetric key parser 'x509' registered
[    1.075741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.075767] io scheduler noop registered
[    1.075786] io scheduler deadline registered
[    1.075858] io scheduler cfq registered (default)
[    1.077486] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    1.078311] irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated
[    1.078836] irq: Cannot allocate irq_descs @ IRQ66, assuming pre-allocated
[    1.079858] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00
[    1.079882] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    1.079898] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    1.079914] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.079929] pci_bus 0000:00: scanning bus
[    1.079975] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[    1.080035] pci 0000:00:01.0: calling pci_fixup_ide_bases+0x0/0x40
[    1.080372] pci_bus 0000:00: fixups for bus
[    1.080390] PCI: bus0: Fast back to back transfers disabled
[    1.080406] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0
[    1.080421] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.080440] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1
[    1.080645] pci_bus 0000:01: scanning bus
[    1.080664] pci_bus 0000:01: fixups for bus
[    1.080675] PCI: bus1: Fast back to back transfers enabled
[    1.080688] pci_bus 0000:01: bus scan returning with max=01
[    1.080706] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.080723] pci_bus 0000:00: bus scan returning with max=01
[    1.080741] pci 0000:00:01.0: fixup irq: got 0
[    1.080754] pci 0000:00:01.0: assigning IRQ 00
[    1.080782] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.080885] pcieport 0000:00:01.0: enabling bus mastering
[    1.081181] mv_xor f1060800.xor: Marvell shared XOR driver
[    1.114699] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.114993] mv_xor f1060900.xor: Marvell shared XOR driver
[    1.154662] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.155276] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.156975] console [ttyS0] disabled
[    1.157053] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[    1.807789] console [ttyS0] enabled
[    1.812831] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
[    1.819262] nand: Samsung NAND 256MiB 3,3V 8-bit
[    1.823926] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.831548] Scanning device for bad blocks
[    1.885992] Bad eraseblock 468 at 0x000003a80000
[    1.904120] Bad eraseblock 594 at 0x000004a40000
[    1.908817] Bad eraseblock 595 at 0x000004a60000
[    1.976228] Bad eraseblock 1180 at 0x000009380000
[    1.981010] Bad eraseblock 1181 at 0x0000093a0000
[    1.992037] Bad eraseblock 1240 at 0x000009b00000
[    2.007899] Bad eraseblock 1344 at 0x00000a800000
[    2.012681] Bad eraseblock 1345 at 0x00000a820000
[    2.033146] Bad eraseblock 1492 at 0x00000ba80000
[    2.051554] Bad eraseblock 1619 at 0x00000ca60000
[    2.110136] libphy: Fixed MDIO Bus: probed
[    2.114785] libphy: orion_mdio_bus: probed
[    2.124694] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    3.202670] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c0:3f:0e:b0:e8:8a
[    3.211644] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.218264] ehci-pci: EHCI PCI platform driver
[    3.222819] ehci-orion: EHCI orion driver
[    3.227100] orion-ehci f1050000.ehci: EHCI Host Controller
[    3.232649] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[    3.240643] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[    3.263874] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[    3.270202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.277066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.284352] usb usb1: Product: EHCI Host Controller
[    3.289256] usb usb1: Manufacturer: Linux 4.4.0-kirkwood-tld-1 ehci_hcd
[    3.295922] usb usb1: SerialNumber: f1050000.ehci
[    3.301570] hub 1-0:1.0: USB hub found
[    3.305445] hub 1-0:1.0: 1 port detected
[    3.310579] mousedev: PS/2 mouse device common for all mice
[    3.623875] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    3.781150] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
[    3.787925] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.795132] usb 1-1: Product: Mass Storage
[    3.799253] usb 1-1: Manufacturer: Generic
[    3.803368] usb 1-1: SerialNumber: F7AC80FA
[    4.323875] rtc-mv f1010300.rtc: internal RTC not ticking
[    4.329567] i2c /dev entries driver
[    4.334292] rtc-pcf8563 0-0051: chip found, driver version 0.4.4
[    4.346404] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
[    4.356411] hidraw: raw HID events driver (C) Jiri Kosina
[    4.362299] drop_monitor: Initializing network drop monitor service
[    4.368951] NET: Registered protocol family 17
[    4.373737] Key type dns_resolver registered
[    4.379074] registered taskstats version 1
[    4.383246] Loading compiled-in X.509 certificates
[    4.388168] zswap: loaded using pool lzo/zbud
[    4.402859] Key type encrypted registered
[    4.408936] rtc-pcf8563 0-0051: setting system clock to 2016-08-01 22:04:14 UTC (1470089054)
[    4.419006] PM: Hibernation image not present or could not be loaded.
[    4.420820] Freeing unused kernel memory: 296K (c07d8000 - c0822000)
[    4.510805] systemd-udevd[81]: starting version 215
[    4.526579] random: systemd-udevd urandom read with 8 bits of entropy available
[    4.713447] SCSI subsystem initialized
[    4.779760] usb-storage 1-1:1.0: USB Mass Storage device detected
[    4.800742] libata version 3.00 loaded.
[    4.803140] sata_mv f1080000.sata: version 1.28
[    4.803481] sata_mv f1080000.sata: slots 32 ports 2
[    4.831164] scsi host0: usb-storage 1-1:1.0
[    4.846261] usbcore: registered new interface driver usb-storage
[    4.862152] scsi host1: sata_mv
[    4.880508] scsi host2: sata_mv
[    4.887214] usbcore: registered new interface driver uas
[    4.895369] ata1: SATA max UDMA/133 irq 33
[    4.899501] ata2: SATA max UDMA/133 irq 33
[    5.243886] ata1: SATA link down (SStatus 0 SControl F300)
[    5.613879] ata2: SATA link down (SStatus 0 SControl F300)
[    5.846265] scsi 0:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 4
[    5.863098] sd 0:0:0:0: [sda] 16099328 512-byte logical blocks: (8.24 GB/7.67 GiB)
[    5.874581] sd 0:0:0:0: [sda] Write Protect is off
[    5.879434] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[    5.880312] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    5.896456]  sda: sda1
[    5.903189] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    5.913521] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   20.866362] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   20.875398] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[   20.882326] EXT4-fs (sda1): write access will be enabled during recovery
[   22.592315] EXT4-fs (sda1): recovery complete
[   23.009852] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   24.401122] systemd-udevd[293]: starting version 215
[   24.617468] random: nonblocking pool is initialized
[   24.738864] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   24.954512] lm75 0-0048: hwmon0: sensor 'lm75'
[   25.041890] orion_wdt: Initial timeout 21 sec
[   25.080118] marvell-cesa: probe of f1030000.crypto failed with error -524
[   26.219608] EXT4-fs (sda1): re-mounted. Opts: (null)
[   27.255510] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   30.127526] NET: Registered protocol family 10
[   31.316840] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
root@debian:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 10000000 00020000 "orion_nand"
root@debian:~# cat /etc/fw_env.config
# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
/dev/mtd0 0xc0000 0x20000 0x20000

Reply Quote

bodhi

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 01, 2016 11:56PM

Admin
Registered: 13 years ago
Posts: 18,543

You need to set in serial console:

setenv console 'console=ttyS0,115200 mtdparts=orion_nand:0xc0000@0(uboot)ro,0xff00000@0x100000(root)'

And boot into Debian, you will see there are 2 mtds (mtd0, and mtd1).

But I'm not sure where the stock Netgear envs are located.

Why don't you get the mtdparts corrected, and then flash the new u-boot:
http://forum.doozan.com/read.php?3,12381

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Reply Quote

freestyle

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 04, 2016 04:07PM

Registered: 7 years ago
Posts: 11

Ok, i write this setenv and save env, now i try to update U-boot

root@debian:~# cat /etc/fw_env.config 
# MTD device name       Device offset   Env. size       Flash sector size       Number of sectors
/dev/mtd0 0xc0000 0x20000 0x20000

root@debian:~# cat /proc/mtd 
dev:    size   erasesize  name
mtd0: 000c0000 00020000 "uboot"
mtd1: 0ff00000 00020000 "root"

are two partitions missing?

root@debian:~# fw_printenv ethaddr
Cannot read bad block mark: Invalid argument
root@debian:~# fw_printenv        
Cannot read bad block mark: Invalid argument

is this normal?

Thank you again

Reply Quote

bodhi

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 04, 2016 11:07PM

Admin
Registered: 13 years ago
Posts: 18,543

freestyle Wrote:
-------------------------------------------------------
> Ok, i write this setenv and save env, now i try to
> update U-boot
>
>

> root@debian:~# cat /etc/fw_env.config 
> # MTD device name       Device offset   Env. size 
>      Flash sector size       Number of sectors
> /dev/mtd0 0xc0000 0x20000 0x20000
>

This is the settings to use with the new u-boot.

> root@debian:~# cat /proc/mtd
> dev: size erasesize name
> mtd0: 000c0000 00020000 "uboot"
> mtd1: 0ff00000 00020000 "root"

> are two partitions missing?
>

I'm not sure what stock Stora defined the MTD partition look like. Do you have a stock serial boot log? I don't recall if you have posted it. It should show the stock MTDs.

Whatever that is, it should stay the same even with the new u-boot running.

> root@debian:~# fw_printenv ethaddr
> Cannot read bad block mark: Invalid argument
> root@debian:~# fw_printenv
> Cannot read bad block mark: Invalid argument
> [/code]
>
> is this normal?

No it is not normal. If you have installed new u-boot and define the envs location as

/dev/mtd0 0xc0000 0x20000 0x20000

then fw_printenv should print valid values for the envs.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Reply Quote

freestyle

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 07, 2016 02:23PM

Registered: 7 years ago
Posts: 11

Trying to install U-boot..

root@debian:/tmp# ./flash_erase /dev/mtd0 0 4
flash_erase: error!: /dev/mtd0
             error 13 (Permission denied)

i'dont erase de mtd0

Reply Quote

bodhi

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 07, 2016 03:03PM

Admin
Registered: 13 years ago
Posts: 18,543

Please post output of

cat /proc/cmdline
cat /proc/mtd

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Reply Quote

freestyle

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 07, 2016 04:39PM

Registered: 7 years ago
Posts: 11

Hello, this is the result

root@debian:~# cat /proc/cmdline
console=ttyS0,115200 mtdparts=orion_nand:0xc0000@0(uboot)ro,0xff00000@0x100000(root) root=LABEL=rootfs rootdelay=10
root@debian:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 000c0000 00020000 "uboot"
mtd1: 0ff00000 00020000 "root"
root@debian:~#

Reply Quote

bodhi

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 07, 2016 05:40PM

Admin
Registered: 13 years ago
Posts: 18,543

freestyle,

Set this in serial console, and boot into Debian

setenv console 'console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(uboot),0xff00000@0x100000(root)'

Once you are in Debian see if you can list your mtd again correctly. I've made 2 adjustments: to make it RW, and to make mtd0 1MB (previously it was 0.75 MB)

Tthen flash u-boot and default env image following the instruction for Netgear Stora in u-boot thread.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Reply Quote

freestyle

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 13, 2016 12:10PM

Registered: 7 years ago
Posts: 11

After update the uboot

U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:45:22 -0700)
Netgear-MS2110

SoC:   Kirkwood 88F6281_A0
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
Error: egiga0 address not set.

PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0 
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 
Use USB retry period from the environment: 15 second(s)
1 Storage Device(s) found

Reset IDE: ide_preinit failed
Unknown command 'mmc' - try 'help'

Partition Map for USB device 0  --   Partition Type: DOS

Part	Start Sector	Num Sectors	UUID		Type
  1	2048      	16097280  	00000000-01	0b Boot
loading envs from usb 0 ...
** File not found /boot/uEnv.txt **

no IDE devices available
Unknown command 'mmc' - try 'help'
running scan_disk ...
Scan device usb
device usb 0:1
1 bytes read in 231 ms (0 Bytes/s)
Found bootable drive on usb 0
loading uImage ...
3166745 bytes read in 361 ms (8.4 MiB/s)
loading uInitrd ...
7179935 bytes read in 450 ms (15.2 MiB/s)
loading DTB /boot/dts/kirkwood-netgear_stora_ms2000.dtb ...
11849 bytes read in 812 ms (13.7 KiB/s)
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-4.4.0-kirkwood-tld-1
   Created:      2016-07-31   9:49:58 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3166681 Bytes = 3 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
   Image Name:   initramfs-4.4.0-kirkwood-tld-1
   Created:      2016-02-19   7:33:04 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    7179871 Bytes = 6.8 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
   Booting using the fdt blob at 0x1c00000
   Loading Kernel Image ... OK
   Loading Ramdisk to 03927000, end 03fffe5f ... OK
   Loading Device Tree to 03921000, end 03926e48 ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Mon Jan 25 20:35:24 PST 2016
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine model: NETGEAR MS2000 / MS2110 aka Stora
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 120632K/131072K available (6007K kernel code, 573K rwdata, 1992K rodata, 296K init, 312K bss, 10440K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07d7ef4   (8000 kB)
[    0.000000]       .init : 0xc07d8000 - 0xc0822000   ( 296 kB)
[    0.000000]       .data : 0xc0822000 - 0xc08b169c   ( 574 kB)
[    0.000000]        .bss : 0xc08b169c - 0xc08ff9d0   ( 313 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000011] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.008343] Console: colour dummy device 80x30
[    0.012918] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
[    0.100845] pid_max: default: 32768 minimum: 301
[    0.105696] Security Framework initialized
[    0.110033] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.116781] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.125029] Initializing cgroup subsys io
[    0.129235] Initializing cgroup subsys devices
[    0.133823] Initializing cgroup subsys freezer
[    0.138446] Initializing cgroup subsys net_cls
[    0.143095] CPU: Testing write buffer coherency: ok
[    0.148695] Setting up static identity map for 0x8200 - 0x8258
[    0.155005] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[    0.164698] devtmpfs: initialized
[    0.174178] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.184757] prandom: seed boundary self test passed
[    0.194343] prandom: 100 self tests passed
[    0.198621] pinctrl core: initialized pinctrl subsystem
[    0.205614] NET: Registered protocol family 16
[    0.210714] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.248069] cpuidle: using governor ladder
[    0.278068] cpuidle: using governor menu
[    0.282553] Feroceon L2: Enabling L2
[    0.286280] Feroceon L2: Cache support initialised.
[    0.291783] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[    0.308944] No ATAGs?
[    0.349852] vgaarb: loaded
[    0.353360] usbcore: registered new interface driver usbfs
[    0.359117] usbcore: registered new interface driver hub
[    0.364627] usbcore: registered new device driver usb
[    0.371088] clocksource: Switched to clocksource orion_clocksource
[    0.444276] NET: Registered protocol family 2
[    0.449674] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.456926] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.463444] TCP: Hash tables configured (established 1024 bind 1024)
[    0.469988] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.475976] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.482615] NET: Registered protocol family 1
[    0.487502] RPC: Registered named UNIX socket transport module.
[    0.493599] RPC: Registered udp transport module.
[    0.498409] RPC: Registered tcp transport module.
[    0.503248] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.510245] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.518195] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.524557] audit: initializing netlink subsys (disabled)
[    0.530113] audit: type=2000 audit(0.510:1): initialized
[    0.536029] Initialise system trusted keyring
[    0.540917] zbud: loaded
[    0.543946] VFS: Disk quotas dquot_6.6.0
[    0.548036] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.555809] NFS: Registering the id_resolver key type
[    0.561015] Key type id_resolver registered
[    0.565362] Key type id_legacy registered
[    0.569502] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.576358] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.583112] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.590895] Key type big_key registered
[    0.608484] Key type asymmetric registered
[    0.612813] Asymmetric key parser 'x509' registered
[    0.617907] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.625652] io scheduler noop registered
[    0.629691] io scheduler deadline registered
[    0.634205] io scheduler cfq registered (default)
[    0.640650] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    0.649034] irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated
[    0.656585] irq: Cannot allocate irq_descs @ IRQ66, assuming pre-allocated
[    0.664620] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00
[    0.671752] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    0.678144] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    0.685163] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.691268] PCI: bus0: Fast back to back transfers disabled
[    0.696977] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.705377] PCI: bus1: Fast back to back transfers enabled
[    0.711067] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.716568] mv_xor f1060800.xor: Marvell shared XOR driver
[    0.761919] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    0.769625] mv_xor f1060900.xor: Marvell shared XOR driver
[    0.811920] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    0.819916] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.828087] console [ttyS0] disabled
[    0.831901] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[    0.841028] console [ttyS0] enabled
[    0.841028] console [ttyS0] enabled
[    0.848179] bootconsole [earlycon0] disabled
[    0.848179] bootconsole [earlycon0] disabled
[    0.858421] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
[    0.864852] nand: Samsung NAND 256MiB 3,3V 8-bit
[    0.869494] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.877134] Scanning device for bad blocks
[    0.931642] Bad eraseblock 468 at 0x000003a80000
[    0.949759] Bad eraseblock 594 at 0x000004a40000
[    0.954475] Bad eraseblock 595 at 0x000004a60000
[    1.021954] Bad eraseblock 1180 at 0x000009380000
[    1.026733] Bad eraseblock 1181 at 0x0000093a0000
[    1.037755] Bad eraseblock 1240 at 0x000009b00000
[    1.053623] Bad eraseblock 1344 at 0x00000a800000
[    1.058404] Bad eraseblock 1345 at 0x00000a820000
[    1.078890] Bad eraseblock 1492 at 0x00000ba80000
[    1.097236] Bad eraseblock 1619 at 0x00000ca60000
[    1.151015] libphy: Fixed MDIO Bus: probed
[    1.155631] libphy: orion_mdio_bus: probed
[    1.160611] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    2.239989] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:00:00:00:00:00
[    2.248956] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.255593] ehci-pci: EHCI PCI platform driver
[    2.260150] ehci-orion: EHCI orion driver
[    2.264424] orion-ehci f1050000.ehci: EHCI Host Controller
[    2.269973] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[    2.277890] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[    2.301129] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[    2.307453] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.314310] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.321590] usb usb1: Product: EHCI Host Controller
[    2.326493] usb usb1: Manufacturer: Linux 4.4.0-kirkwood-tld-1 ehci_hcd
[    2.333160] usb usb1: SerialNumber: f1050000.ehci
[    2.338790] hub 1-0:1.0: USB hub found
[    2.342667] hub 1-0:1.0: 1 port detected
[    2.347816] mousedev: PS/2 mouse device common for all mice
[    2.661130] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    2.818397] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
[    2.825173] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.832388] usb 1-1: Product: Mass Storage
[    2.836508] usb 1-1: Manufacturer: Generic
[    2.840623] usb 1-1: SerialNumber: F7AC80FA
[    3.361122] rtc-mv f1010300.rtc: internal RTC not ticking
[    3.366798] i2c /dev entries driver
[    3.371500] rtc-pcf8563 0-0051: chip found, driver version 0.4.4
[    3.383606] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
[    3.393603] hidraw: raw HID events driver (C) Jiri Kosina
[    3.399496] drop_monitor: Initializing network drop monitor service
[    3.406153] NET: Registered protocol family 17
[    3.410938] Key type dns_resolver registered
[    3.416221] registered taskstats version 1
[    3.420398] Loading compiled-in X.509 certificates
[    3.425325] zswap: loaded using pool lzo/zbud
[    3.431014] Key type encrypted registered
[    3.437027] rtc-pcf8563 0-0051: setting system clock to 2016-08-13 18:52:43 UTC (1471114363)
[    3.448117] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[    3.455784] Please append a correct "root=" boot option; here are the available partitions:
[    3.464250] 1f00          262144 mtdblock0  (driver?)
[    3.469338] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    3.477648] CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0-kirkwood-tld-1 #1
[    3.484636] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[    3.490968] [<c0016784>] (unwind_backtrace) from [<c00129f8>] (show_stack+0x10/0x14)
[    3.498757] [<c00129f8>] (show_stack) from [<c00c2200>] (panic+0x80/0x214)
[    3.505674] [<c00c2200>] (panic) from [<c07d9280>] (mount_block_root+0x204/0x24c)
[    3.513196] [<c07d9280>] (mount_block_root) from [<c07d93b4>] (mount_root+0xec/0x118)
[    3.521069] [<c07d93b4>] (mount_root) from [<c07d9504>] (prepare_namespace+0x124/0x184)
[    3.529118] [<c07d9504>] (prepare_namespace) from [<c07d8e9c>] (kernel_init_freeable+0x208/0x258)
[    3.538044] [<c07d8e9c>] (kernel_init_freeable) from [<c05b16b4>] (kernel_init+0x8/0xe4)
[    3.546185] [<c05b16b4>] (kernel_init) from [<c000f090>] (ret_from_fork+0x14/0x24)
[    3.553796] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

Thank you bodhi!!

Reply Quote

bodhi

Re: Running Netgear Stora with Linux Kernel 4.6 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs
August 13, 2016 03:23PM

Admin
Registered: 13 years ago
Posts: 18,543

freestyle,

Excellent! Now there is one problem with mounting rootfs. This was because your uImage still has the DTB embedded inside that you needed to boot with stock u-boot (step 4):

Quote

4. Create uImage with embedded DTB for booting with older u-boots (2012 or earlier). Skip this step if you have installed the latest U-Boot for Kirkwood (or are installing this u-boot at the same time).

Please replace kirkwood-goflexnet.dtb below with the correct DTB name for your box (see the folder /media/sdb1/boot/dts).

Generate the uImage with DTB embedded inside:
cd /media/sdb1/boot
cp -a zImage-4.4.0-kirkwood-tld-1 zImage.fdt
cat dts/kirkwood-goflexnet.dtb >> zImage.fdt
mv uImage uImage.orig
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.4.0-kirkwood-tld-1 -d zImage.fdt uImage
sync

So now that you boot with new u-boot and separate DTB

loading DTB /boot/dts/kirkwood-netgear_stora_ms2000.dtb ...

uImage needs to be restored back to the original.

cd /boot
mv uImage uImage.netgear
mv uImage.orig uImage

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Reply Quote