Welcome! Log In Create A New Profile

Advanced

Can't see usb device after updated to Kernel 4.8

Posted by SiliCAT 
Can't see usb device after updated to Kernel 4.8
October 12, 2016 06:10PM
Box: Pogoplug V4

Just updated to Kernel 4.8 Kirkwood (10 Oct 2016).
Nothing happened when plugged in usb external hard drive.
Re: Can't see usb device after updated to Kernel 4.8
October 12, 2016 08:34PM
SiliCAT Wrote:
-------------------------------------------------------
> Box: Pogoplug V4
>
> Just updated to Kernel 4.8 Kirkwood (10 Oct
> 2016).
> Nothing happened when plugged in usb external hard
> drive.

Post serial console log. Or dmesg log after plugging the USB drive.

Did it detect the drive in previous kernel?

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Re: Can't see usb device after updated to Kernel 4.8
October 12, 2016 11:45PM
Hold on to installing this kernel, possibly the USB 3.0 interface is broken.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Re: Can't see usb device after updated to Kernel 4.8
October 13, 2016 02:06PM
Re: Can't see usb device after updated to Kernel 4.8
October 13, 2016 02:15PM
Thank you, bodhi.
I'll try the attached kirkwood-pogoplug_v4.dtb of that post.
Re: Can't see usb device after updated to Kernel 4.8
October 13, 2016 04:23PM
It works
[  163.384855] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[  163.415893] usb 3-2: New USB device found, idVendor=174c, idProduct=1153
[  163.422583] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  163.430079] usb 3-2: Product: AS2115
[  163.433646] usb 3-2: Manufacturer: ASMedia
[  163.438082] usb 3-2: SerialNumber: 00000000000000000000
[  163.492145] usb-storage 3-2:1.0: USB Mass Storage device detected
[  163.502339] scsi host1: usb-storage 3-2:1.0
[  163.510518] usbcore: registered new interface driver usb-storage
[  163.525197] usbcore: registered new interface driver uas
[  164.565712] scsi 1:0:0:0: Direct-Access     ASMT     2115             0    PQ: 0 ANSI: 6
[  164.595280] sd 1:0:0:0: [sda] Spinning up disk...
[  165.684750] ..ready
[  166.727071] sd 1:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[  166.735475] sd 1:0:0:0: [sda] Write Protect is off
[  166.740270] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[  166.740690] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  166.767270]  sda: sda1
[  166.773068] sd 1:0:0:0: [sda] Attached SCSI disk
[  166.787786] sd 1:0:0:0: Attached scsi generic sg0 type 0

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: