Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L February 06, 2017 04:39PM |
Registered: 9 years ago Posts: 100 |
[ 3.070003] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3.087119] ata1.00: ATA-9: INTEL SSDSC2BF180A4L, LADi, max UDMA/133 [ 3.093496] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 18.100001] ata1.00: qc timeout (cmd 0xef) [ 18.104084] sata_oxnas: resetting SATA core [ 18.460001] ata1.00: failed to set xfermode (err_mask=0x5) [ 18.969999] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 33.990005] ata1.00: qc timeout (cmd 0xef) ......
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L February 07, 2017 01:12AM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L February 07, 2017 04:19PM |
Registered: 9 years ago Posts: 100 |
[ 2.853009] Freeing unused kernel memory: 228K (c080f000 - c0848000) Loading, please wait... [ 2.998254] udevd[94]: starting version 175 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Waiting for root file system ... done. Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/sda2 does not exist. Dropping to a shell! modprobe: module i8042 not found in modules.dep modprobe: module uhci-hcd not found in modules.dep modprobe: module ohci-hcd not found in modules.dep BusyBox v1.20.2 (Debian 1:1.20.0-7) built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off (initramfs) (initramfs) cd /dev (initramfs) cat /proc/modules (initramfs)
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L February 07, 2017 05:55PM |
Admin Registered: 13 years ago Posts: 18,564 |
ls -lart /boot/dts/ox820-pogoplug*.dtb
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L February 07, 2017 06:03PM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L February 08, 2017 02:08PM |
Registered: 9 years ago Posts: 100 |
autoload=no baudrate=115200 bootargs=console=ttyS0,115200n8 bootcmd=run bootcmd_uenv; run dt_bootcmd_usb; reset bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 console=console=ttyS0,115200n8 devices=usb ide dt_bootcmd_usb=usb start; run dt_usb_bootcmd; usb stop; reset dt_bootm=bootm $uimage_addr $uinitrd_addr $dtb_addr dt_load_dtb=ext2load ide 0:2 $dtb_addr /boot/dts/ox820-pogoplug-pro.dtb dt_load_initrd=ext2load ide 0:2 $uinitrd_addr /boot/uInitrd dt_load_uimage=ext2load ide 0:2 $uimage_addr /boot/uImage dt_usb_boot=run dt_load_uimage; run dt_load_initrd; run dt_load_dtb; run dt_bootm dt_usb_bootcmd=run usb_set_bootargs; run dt_usb_boot dtb_addr=0x62c00000 ethact=dwmac.40400000 ethaddr=5e:2b:15:71:ec:b6 if_netconsole=ping $serverip ipaddr=192.168.0.222 mtdids=nand0=41000000.nand mtdparts=mtdparts=41000000.nand:14m(boot),-(data) preboot_nc=run if_netconsole start_netconsole serverip=192.168.0.220 start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version stderr=serial stdin=serial stdout=serial uenv_import=echo importing envs ...; env import -t 0x60500000 uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi uimage_addr=0x60500000 uinitrd_addr=0x60e00000 usb_device=0:1 usb_set_bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 Environment size: 1975/131068 bytes
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L February 08, 2017 02:43PM |
Admin Registered: 13 years ago Posts: 18,564 |
usb_set_bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10
usb_set_bootargs=setenv bootargs "console=ttyS0,115200 root=LABEL=rootfs rootdelay=10"
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L February 08, 2017 05:34PM |
Registered: 9 years ago Posts: 100 |
Quote
2) The SATA initialization might be because a change in driver. SSD sometime is picky (HDD is never so). Some SSD could never be used for booting. In this case, apparently kernel 4.1 works, so it might be tthe difference in sata_oxnas driver between 2 kernels.
I think the best way to solve this SATA problem is either:
1. Try using another SSD or HDD to see if same symptom occurs.
2. Boot with USB and then plug in the SSD to see if it can be initialized after the system is running.
If number 2 is still not working then I'll take a look at the driver.
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L February 08, 2017 06:10PM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L February 13, 2017 01:56PM |
Registered: 9 years ago Posts: 100 |
[ 88.996234] sata_oxnas: resetting SATA core [ 89.010711] ata1: exception Emask 0x10 SAct 0x0 SErr 0x20000 action 0xe frozen [ 89.017907] ata1: SError: { PHYInt } [ 89.021539] ata1: hard resetting link [ 89.930022] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 89.946247] ata1.00: ATA-9: INTEL SSDSC2BF180A4L, LADi, max UDMA/133 [ 89.952616] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 104.960040] ata1.00: qc timeout (cmd 0xef) [ 104.964124] sata_oxnas: resetting SATA core [ 105.320035] ata1.00: failed to set xfermode (err_mask=0x5) [ 105.325511] ata1: hard resetting link [ 105.830026] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 120.850040] ata1.00: qc timeout (cmd 0xef) [ 120.854126] sata_oxnas: resetting SATA core [ 121.210035] ata1.00: failed to set xfermode (err_mask=0x5) [ 121.215513] ata1.00: limiting speed to UDMA/133:PIO3 [ 121.220523] ata1: hard resetting link [ 121.730030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 136.750033] ata1.00: qc timeout (cmd 0xef) [ 136.754117] sata_oxnas: resetting SATA core [ 137.110039] ata1.00: failed to set xfermode (err_mask=0x5) [ 137.115507] ata1.00: disabled [ 137.118479] sata_oxnas: resetting SATA core [ 137.132956] ata1: exception Emask 0x10 SAct 0x0 SErr 0x20000 action 0xe frozen t4 [ 137.140436] ata1: SError: { PHYInt } [ 137.144017] ata1: hard resetting link [ 138.050032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 138.067128] ata1.00: ATA-9: INTEL SSDSC2BF180A4L, LADi, max UDMA/133 [ 138.073500] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 153.080184] ata1.00: qc timeout (cmd 0xef) [ 153.084267] sata_oxnas: resetting SATA core [ 153.440038] ata1.00: failed to set xfermode (err_mask=0x5) [ 153.445514] ata1: hard resetting link [ 153.950036] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 168.970048] ata1.00: qc timeout (cmd 0xef) [ 168.974133] sata_oxnas: resetting SATA core [ 169.330048] ata1.00: failed to set xfermode (err_mask=0x5) [ 169.335526] ata1.00: limiting speed to UDMA/133:PIO3 [ 169.340538] ata1: hard resetting link [ 169.850042] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 184.870049] ata1.00: qc timeout (cmd 0xef) [ 184.874129] sata_oxnas: resetting SATA core [ 185.230046] ata1.00: failed to set xfermode (err_mask=0x5) [ 185.235517] ata1.00: disabled [ 185.238487] sata_oxnas: resetting SATA core [ 185.252953] ata1: exception Emask 0x10 SAct 0x0 SErr 0x20000 action 0xe frozen t3 [ 185.260431] ata1: SError: { PHYInt } [ 185.264010] ata1: hard resetting link [ 186.170048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 186.187148] ata1.00: ATA-9: INTEL SSDSC2BF180A4L, LADi, max UDMA/133 [ 186.193523] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 201.200056] ata1.00: qc timeout (cmd 0xef) [ 201.204142] sata_oxnas: resetting SATA core [ 201.560051] ata1.00: failed to set xfermode (err_mask=0x5) [ 201.565527] ata1: hard resetting link [ 202.070049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 217.090068] ata1.00: qc timeout (cmd 0xef) [ 217.094151] sata_oxnas: resetting SATA core [ 217.450055] ata1.00: failed to set xfermode (err_mask=0x5) [ 217.455528] ata1.00: limiting speed to UDMA/133:PIO3 [ 217.460541] ata1: hard resetting link [ 217.970050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 232.990069] ata1.00: qc timeout (cmd 0xef) [ 232.994152] sata_oxnas: resetting SATA core [ 233.350059] ata1.00: failed to set xfermode (err_mask=0x5) [ 233.355525] ata1.00: disabled [ 233.358494] sata_oxnas: resetting SATA core [ 233.372945] ata1: exception Emask 0x10 SAct 0x0 SErr 0x20000 action 0xe frozen t2 [ 233.380441] ata1: SError: { PHYInt } [ 233.384017] ata1: hard resetting link [ 234.290058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 234.307159] ata1.00: ATA-9: INTEL SSDSC2BF180A4L, LADi, max UDMA/133 [ 234.313533] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 249.320069] ata1.00: qc timeout (cmd 0xef) [ 249.324152] sata_oxnas: resetting SATA core [ 249.680061] ata1.00: failed to set xfermode (err_mask=0x5) [ 249.685539] ata1: hard resetting link [ 250.190246] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 265.210071] ata1.00: qc timeout (cmd 0xef) [ 265.214156] sata_oxnas: resetting SATA core [ 265.570076] ata1.00: failed to set xfermode (err_mask=0x5) [ 265.575552] ata1.00: limiting speed to UDMA/133:PIO3 [ 265.580567] ata1: hard resetting link [ 266.090071] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 281.110072] ata1.00: qc timeout (cmd 0xef) [ 281.114155] sata_oxnas: resetting SATA core [ 281.470080] ata1.00: failed to set xfermode (err_mask=0x5) [ 281.475548] ata1.00: disabled [ 281.478520] sata_oxnas: resetting SATA core [ 281.492968] ata1: exception Emask 0x10 SAct 0x0 SErr 0x20000 action 0xe frozen t1 [ 281.500449] ata1: SError: { PHYInt } [ 281.504028] ata1: hard resetting link [ 282.410068] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 282.427171] ata1.00: ATA-9: INTEL SSDSC2BF180A4L, LADi, max UDMA/133 [ 282.433543] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 297.440081] ata1.00: qc timeout (cmd 0xef) [ 297.444165] sata_oxnas: resetting SATA core [ 297.800076] ata1.00: failed to set xfermode (err_mask=0x5) [ 297.805555] ata1: hard resetting link [ 298.310069] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 313.330094] ata1.00: qc timeout (cmd 0xef) [ 313.334177] sata_oxnas: resetting SATA core [ 313.690076] ata1.00: failed to set xfermode (err_mask=0x5) [ 313.695552] ata1.00: limiting speed to UDMA/133:PIO3 [ 313.700567] ata1: hard resetting link [ 314.210081] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 329.230082] ata1.00: qc timeout (cmd 0xef) [ 329.234163] sata_oxnas: resetting SATA core [ 329.590085] ata1.00: failed to set xfermode (err_mask=0x5) [ 329.595558] ata1.00: disabled [ 329.598525] ata1: EH pending after 5 tries, giving up [ 329.603642] ata1: EH complete
[ 51.559137] ox820sata: reseting SATA core [ 51.573652] ata1: exception Emask 0x10 SAct 0x0 SErr 0x20000 action 0xe frozen [ 51.580887] ata1: SError: { PHYInt } [ 51.584465] ata1: hard resetting link [ 52.490032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 52.507133] ata1.00: ATA-9: INTEL SSDSC2BF180A4L, LADi, max UDMA/133 [ 52.513502] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 52.547161] ata1.00: configured for UDMA/133 [ 52.551470] ata1: EH complete [ 52.554867] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BF18 LADi PQ: 0 ANSI: 5 [ 52.569021] sd 0:0:0:0: [sdb] 351651888 512-byte logical blocks: (180 GB/167 GiB) [ 52.578644] sd 0:0:0:0: [sdb] Write Protect is off [ 52.583772] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 52.602112] sdb: sdb1 sdb2 sdb3 [ 52.618211] sd 0:0:0:0: [sdb] Attached SCSI disk
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L February 14, 2017 12:45AM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L March 22, 2017 04:27PM |
Registered: 9 years ago Posts: 100 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L March 22, 2017 05:28PM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L March 22, 2017 06:10PM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L March 22, 2017 06:27PM |
Registered: 9 years ago Posts: 100 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L March 22, 2017 09:20PM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L March 23, 2017 04:20PM |
Registered: 9 years ago Posts: 100 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L June 20, 2017 04:53PM |
Registered: 9 years ago Posts: 100 |
[ 1.139781] Key type encrypted registered [ 1.160573] UBI error: cannot open mtd data, error -2VFS: Cannot open root device "sda2" or unknown-bl ock(0,0): error -6 [ 1.173859] Please append a correct "root=" boot option; here are the available partitions: [ 1.182282] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.190517] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.38-oxnas-tld-5 #1 [ 1.197442] Hardware name: PLXTECH NAS782X SoC (Flattened Device Tree) [ 1.203965] [<c0010c4c>] (unwind_backtrace) from [<c000cf70>] (show_stack+0x10/0x14) [ 1.211686] [<c000cf70>] (show_stack) from [<c02cef00>] (dump_stack+0x84/0xa0) [ 1.218882] [<c02cef00>] (dump_stack) from [<c0091bf4>] (panic+0x8c/0x1ec) [ 1.225733] [<c0091bf4>] (panic) from [<c0810188>] (mount_block_root+0x1a0/0x258) [ 1.233187] [<c0810188>] (mount_block_root) from [<c0810338>] (mount_root+0xf8/0x124) [ 1.240983] [<c0810338>] (mount_root) from [<c0810494>] (prepare_namespace+0x130/0x194) [ 1.248954] [<c0810494>] (prepare_namespace) from [<c080fe04>] (kernel_init_freeable+0x198/0x1e4) [ 1.257797] [<c080fe04>] (kernel_init_freeable) from [<c0603728>] (kernel_init+0x8/0xec) [ 1.265858] [<c0603728>] (kernel_init) from [<c000a508>] (ret_from_fork+0x14/0x2c) [ 1.273402] CPU1: stopping [ 1.276108] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.38-oxnas-tld-5 #1 [ 1.283033] Hardware name: PLXTECH NAS782X SoC (Flattened Device Tree) [ 1.289548] [<c0010c4c>] (unwind_backtrace) from [<c000cf70>] (show_stack+0x10/0x14) [ 1.297267] [<c000cf70>] (show_stack) from [<c02cef00>] (dump_stack+0x84/0xa0) [ 1.304463] [<c02cef00>] (dump_stack) from [<c000fb64>] (handle_IPI+0x190/0x1c4) [ 1.311831] [<c000fb64>] (handle_IPI) from [<c0009468>] (gic_handle_irq+0x74/0x7c) [ 1.319372] [<c0009468>] (gic_handle_irq) from [<c000da00>] (__irq_svc+0x40/0x74) [ 1.326814] Exception stack(0xc7869f88 to 0xc7869fd0) [ 1.331845] 9f80: 00000001 00000000 00000000 00000000 00000000 c060862c [ 1.339985] 9fa0: 00000000 c7869fe0 c08422c4 c08506ac c7868000 00000000 00000000 c7869fd8 [ 1.348124] 9fc0: c000af3c c000af40 60000013 ffffffff [ 1.353157] [<c000da00>] (__irq_svc) from [<c000af40>] (arch_cpu_idle+0x28/0x30) [ 1.360529] [<c000af40>] (arch_cpu_idle) from [<c004d290>] (cpu_startup_entry+0x14c/0x260) [ 1.368762] [<c004d290>] (cpu_startup_entry) from [<60009508>] (0x60009508) [ 1.375700] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L June 20, 2017 05:27PM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L June 20, 2017 06:00PM |
Registered: 9 years ago Posts: 100 |
OX820 # run ext4_ideboot 4621824 bytes read in 825 ms (5.3 MiB/s) 7033 bytes read in 29 ms (236.3 KiB/s) magic: 0xd00dfeed totalsize: 0x1b79 (7033) off_dt_struct: 0x38 off_dt_strings: 0x18d4 off_mem_rsvmap: 0x28 version: 17 last_comp_version: 16 boot_cpuid_phys: 0x0 size_dt_strings: 0x2a5 size_dt_struct: 0x189c number mem_rsv: 0x0 ## Booting kernel from Legacy Image at 60000000 ... Image Name: Linux-4.4.54-oxnas-tld-1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4621760 Bytes = 4.4 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 61000000 Booting using the fdt blob at 0x61000000 Loading Kernel Image ... OK Loading Device Tree to 67e26000, end 67e2ab78 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.54-oxnas-tld-1 (root@tldDebian) (gcc version 47 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cd [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie [ 0.000000] Machine model: Pogoplug Pro [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logicap [ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u4912 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/sda2 rootf2 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 120696K/131072K available (6410K kernel code, 288K rwdat) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0827e14 (8320 kB) [ 0.000000] .init : 0xc0828000 - 0xc0860000 ( 224 kB) [ 0.000000] .data : 0xc0860000 - 0xc08a8378 ( 289 kB) [ 0.000000] .bss : 0xc08a8378 - 0xc08e6350 ( 248 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0s [ 0.000007] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 2s [ 0.000174] Console: colour dummy device 80x30 [ 0.000207] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440) [ 0.050030] pid_max: default: 32768 minimum: 301 [ 0.050204] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050224] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051095] Initializing cgroup subsys net_cls [ 0.051179] CPU: Testing write buffer coherency: ok [ 0.051630] Setting up static identity map for 0x60008220 - 0x60008258 [ 0.190151] Brought up 2 CPUs [ 0.190174] SMP: Total of 2 processors activated (638.97 BogoMIPS). [ 0.191009] devtmpfs: initialized [ 0.196894] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms [ 0.196943] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.197273] prandom: seed boundary self test passed [ 0.201966] prandom: 100 self tests passed [ 0.201996] pinctrl core: initialized pinctrl subsystem [ 0.202872] NET: Registered protocol family 16 [ 0.203461] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.230016] cpuidle: using governor ladder [ 0.260008] cpuidle: using governor menu [ 0.265152] gpio-oxnas 44000000.gpio: at address c8848000 [ 0.265576] gpio-oxnas 44100000.gpio: at address c884a000 [ 0.266168] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver [ 0.280634] vgaarb: loaded [ 0.281152] SCSI subsystem initialized [ 0.282094] usbcore: registered new interface driver usbfs [ 0.282209] usbcore: registered new interface driver hub [ 0.282375] usbcore: registered new device driver usb [ 0.282572] pps_core: LinuxPPS API ver. 1 registered [ 0.282588] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom> [ 0.282634] PTP clock support registered [ 0.284887] clocksource: Switched to clocksource rps_clocksource_timer [ 0.304916] NET: Registered protocol family 2 [ 0.305848] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.305894] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.305932] TCP: Hash tables configured (established 1024 bind 1024) [ 0.306035] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.306078] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.306357] NET: Registered protocol family 1 [ 0.306918] RPC: Registered named UNIX socket transport module. [ 0.306941] RPC: Registered udp transport module. [ 0.306951] RPC: Registered tcp transport module. [ 0.306964] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.308902] Initialise system trusted keyring [ 0.323517] zbud: loaded [ 0.328988] NFS: Registering the id_resolver key type [ 0.329054] Key type id_resolver registered [ 0.329067] Key type id_legacy registered [ 0.329113] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.329136] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.330273] fuse init (API version 7.23) [ 0.332408] Key type big_key registered [ 0.399618] Key type asymmetric registered [ 0.399654] Asymmetric key parser 'x509' registered [ 0.399795] Block layer SCSI generic (bsg) driver version 0.4 loaded (major ) [ 0.399823] io scheduler noop registered [ 0.399846] io scheduler deadline registered [ 0.399912] io scheduler cfq registered (default) [ 0.400808] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.402411] console [ttyS0] disabled [ 0.402513] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 39A [ 0.916549] console [ttyS0] enabled [ 0.932318] loop: module loaded [ 0.936934] nand: second ID read did not match 00,1d against ad,f1 [ 0.943147] nand: No NAND device found [ 0.947468] oxnas-gmac 40400000.ethernet: no reset control found [ 0.953518] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 0.958545] Ring mode enabled [ 0.961605] DMA HW capability register supported [ 0.966113] Enhanced/Alternate descriptors [ 0.970467] Enabled extended descriptors [ 0.974453] RX Checksum Offload Engine supported (type 2) [ 0.979904] TX Checksum insertion supported [ 0.984166] Wake-Up On Lan supported [ 0.987809] Enable RX Mitigation via HW Watchdog Timer [ 0.995566] libphy: stmmac: probed [ 0.998963] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active [ 1.005480] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03) [ 1.012336] PPP generic driver version 2.4.2 [ 1.017249] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.023907] ehci-pci: EHCI PCI platform driver [ 1.028807] usbcore: registered new interface driver cdc_acm [ 1.034544] cdc_acm: USB Abstract Control Model driver for USB modems and ISs [ 1.042721] usbcore: registered new interface driver cdc_wdm [ 1.048522] usbcore: registered new interface driver usb-storage [ 1.054743] usbcore: registered new interface driver usbserial [ 1.060664] usbcore: registered new interface driver usbserial_generic [ 1.067223] usbserial: USB Serial support registered for generic [ 1.073687] mousedev: PS/2 mouse device common for all mice [ 1.079424] i2c /dev entries driver [ 1.084431] hidraw: raw HID events driver (C) Jiri Kosina [ 1.090201] usbcore: registered new interface driver usbhid [ 1.095749] usbhid: USB HID core driver [ 1.101552] NET: Registered protocol family 10 [ 1.107450] sit: IPv6 over IPv4 tunneling driver [ 1.113164] NET: Registered protocol family 17 [ 1.117785] Key type dns_resolver registered [ 1.123509] registered taskstats version 1 [ 1.127628] Loading compiled-in X.509 certificates [ 1.132577] zswap: loaded using pool lzo/zbud [ 1.139095] Key type encrypted registered [ 1.160550] UBI error: cannot open mtd data, error -2VFS: Cannot open root d6 [ 1.173803] Please append a correct "root=" boot option; here are the availa: [ 1.182228] Kernel panic - not syncing: VFS: Unable to mount root fs on unkn) [ 1.190464] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.54-oxnas-tld-1 #2 [ 1.197391] Hardware name: PLXTECH NAS782X SoC (Flattened Device Tree) [ 1.203911] [<c0010c6c>] (unwind_backtrace) from [<c000cf8c>] (show_stack+0x) [ 1.211630] [<c000cf8c>] (show_stack) from [<c02cf840>] (dump_stack+0x84/0xa) [ 1.218828] [<c02cf840>] (dump_stack) from [<c0091c78>] (panic+0x8c/0x1ec) [ 1.225679] [<c0091c78>] (panic) from [<c0829188>] (mount_block_root+0x1a0/0) [ 1.233131] [<c0829188>] (mount_block_root) from [<c0829338>] (mount_root+0x) [ 1.240929] [<c0829338>] (mount_root) from [<c0829494>] (prepare_namespace+0) [ 1.248901] [<c0829494>] (prepare_namespace) from [<c0828e04>] (kernel_init_) [ 1.257743] [<c0828e04>] (kernel_init_freeable) from [<c0616b2c>] (kernel_in) [ 1.265802] [<c0616b2c>] (kernel_init) from [<c000a508>] (ret_from_fork+0x14) [ 1.273344] CPU1: stopping [ 1.276049] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.54-oxnas-tld-1 #2 [ 1.282974] Hardware name: PLXTECH NAS782X SoC (Flattened Device Tree) [ 1.289487] [<c0010c6c>] (unwind_backtrace) from [<c000cf8c>] (show_stack+0x) [ 1.297205] [<c000cf8c>] (show_stack) from [<c02cf840>] (dump_stack+0x84/0xa) [ 1.304404] [<c02cf840>] (dump_stack) from [<c000fb84>] (handle_IPI+0x190/0x) [ 1.311769] [<c000fb84>] (handle_IPI) from [<c0009468>] (gic_handle_irq+0x74) [ 1.319306] [<c0009468>] (gic_handle_irq) from [<c000da20>] (__irq_svc+0x40/) [ 1.326750] Exception stack(0xc7869f88 to 0xc7869fd0) [ 1.331781] 9f80: 00000001 00000000 00000000 00000000 0000c [ 1.339921] 9fa0: 00000000 c7869fe0 c085b2c4 c08686ac c7868000 00000000 00008 [ 1.348060] 9fc0: c000af3c c000af40 60000013 ffffffff [ 1.353093] [<c000da20>] (__irq_svc) from [<c000af40>] (arch_cpu_idle+0x28/0) [ 1.360463] [<c000af40>] (arch_cpu_idle) from [<c004d348>] (cpu_startup_entr) [ 1.368693] [<c004d348>] (cpu_startup_entry) from [<60009508>] (0x60009508) [ 1.375631] ---[ end Kernel panic - not syncing: VFS: Unable to mount root f)
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L June 20, 2017 06:04PM |
Registered: 9 years ago Posts: 100 |
4488520 bytes read in 758 ms (5.6 MiB/s) 7033 bytes read in 29 ms (236.3 KiB/s) magic: 0xd00dfeed totalsize: 0x1b79 (7033) off_dt_struct: 0x38 off_dt_strings: 0x18d4 off_mem_rsvmap: 0x28 version: 17 last_comp_version: 16 boot_cpuid_phys: 0x0 size_dt_strings: 0x2a5 size_dt_struct: 0x189c number mem_rsv: 0x0 ## Booting kernel from Legacy Image at 60000000 ... Image Name: Linux-4.1.0-oxnas-tld-1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4488456 Bytes = 4.3 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 61000000 Booting using the fdt blob at 0x61000000 Loading Kernel Image ... OK Loading Device Tree to 67e26000, end 67e2ab78 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.1.0-oxnas-tld-1 (root@tldDebian) (gcc version 4.5 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cd [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie [ 0.000000] Machine model: Pogoplug Pro [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logicap [ 0.000000] Start Ox820 platform [ 0.000000] PERCPU: Embedded 11 pages/cpu @c7edc000 s15456 r8192 d21408 u4506 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/sda2 rootf2 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 120984K/131072K available (6235K kernel code, 275K rwdat) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc07edec8 (8088 kB) [ 0.000000] .init : 0xc07ee000 - 0xc0820000 ( 200 kB) [ 0.000000] .data : 0xc0820000 - 0xc0864fa0 ( 276 kB) [ 0.000000] .bss : 0xc0864fa0 - 0xc08a06a0 ( 238 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000000] clocksource rps_clocksource_timer: mask: 0xffffff max_cycles: 0xs [ 0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 2s [ 0.000176] Console: colour dummy device 80x30 [ 0.000209] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440) [ 0.050035] pid_max: default: 32768 minimum: 301 [ 0.050191] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050209] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051082] Initializing cgroup subsys net_cls [ 0.051148] CPU: Testing write buffer coherency: ok [ 0.051550] Setting up static identity map for 0x60008220 - 0x60008258 [ 0.170147] Brought up 2 CPUs [ 0.170170] SMP: Total of 2 processors activated (638.97 BogoMIPS). [ 0.171159] devtmpfs: initialized [ 0.176163] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, mas [ 0.176404] prandom: seed boundary self test passed [ 0.181086] prandom: 100 self tests passed [ 0.181117] pinctrl core: initialized pinctrl subsystem [ 0.182031] NET: Registered protocol family 16 [ 0.182599] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.210009] cpuidle: using governor ladder [ 0.240005] cpuidle: using governor menu [ 0.245035] gpio-oxnas 44000000.gpio: at address c8848000 [ 0.245370] gpio-oxnas 44100000.gpio: at address c884a000 [ 0.245959] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver [ 0.259525] vgaarb: loaded [ 0.260103] SCSI subsystem initialized [ 0.260986] usbcore: registered new interface driver usbfs [ 0.261096] usbcore: registered new interface driver hub [ 0.261253] usbcore: registered new device driver usb [ 0.261483] pps_core: LinuxPPS API ver. 1 registered [ 0.261498] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom> [ 0.261547] PTP clock support registered [ 0.263296] cfg80211: Calling CRDA to update world regulatory domain [ 0.263828] Switched to clocksource rps_clocksource_timer [ 0.283379] NET: Registered protocol family 2 [ 0.284367] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.284416] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.284451] TCP: Hash tables configured (established 1024 bind 1024) [ 0.284551] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.284597] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.284884] NET: Registered protocol family 1 [ 0.285381] RPC: Registered named UNIX socket transport module. [ 0.285401] RPC: Registered udp transport module. [ 0.285414] RPC: Registered tcp transport module. [ 0.285424] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.287226] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.287306] Initialise system trusted keyring [ 0.300597] zpool: loaded [ 0.300620] zbud: loaded [ 0.306547] NFS: Registering the id_resolver key type [ 0.306611] Key type id_resolver registered [ 0.306624] Key type id_legacy registered [ 0.306667] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.306688] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.307681] fuse init (API version 7.23) [ 0.309396] Key type big_key registered [ 0.315440] alg: No test for stdrng (krng) [ 0.367068] Key type asymmetric registered [ 0.367101] Asymmetric key parser 'x509' registered [ 0.367242] Block layer SCSI generic (bsg) driver version 0.4 loaded (major ) [ 0.367272] io scheduler noop registered [ 0.367293] io scheduler deadline registered [ 0.367669] io scheduler cfq registered (default) [ 0.368407] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.369889] console [ttyS0] disabled [ 0.370068] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 39A [ 0.898452] console [ttyS0] enabled [ 0.912619] loop: module loaded [ 0.917754] scsi host0: sata_oxnas [ 0.921684] ata1: SATA max UDMA/133 irq 7 [ 0.925941] ox820sata: reseting SATA core [ 0.926886] nand: Could not find valid ONFI parameter page; aborting [ 0.926929] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 0.926937] nand: Hynix NAND 128MiB 3,3V 8-bit [ 0.926945] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB si4 [ 0.926963] Scanning device for bad blocks [ 1.010165] 2 ofpart partitions found on MTD device 41000000.nand [ 1.016245] Creating 2 MTD partitions on "41000000.nand": [ 1.021639] 0x000000000000-0x000000e00000 : "boot" [ 1.028111] 0x000000e00000-0x000008000000 : "data" [ 1.035476] stmmaceth 40400000.ethernet: no reset control found [ 1.041410] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 1.046433] Ring mode enabled [ 1.049466] DMA HW capability register supported [ 1.053987] Enhanced/Alternate descriptors [ 1.058316] Enabled extended descriptors [ 1.062315] RX Checksum Offload Engine supported (type 2) [ 1.067768] TX Checksum insertion supported [ 1.072023] Wake-Up On Lan supported [ 1.075660] Enable RX Mitigation via HW Watchdog Timer [ 1.084664] libphy: stmmac: probed [ 1.088058] eth0: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active [ 1.094530] eth0: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03) [ 1.100354] PPP generic driver version 2.4.2 [ 1.105251] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.111795] ehci-pci: EHCI PCI platform driver [ 1.116738] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 1.122270] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus n1 [ 1.130096] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100 [ 1.150597] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 1.156894] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.163740] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1 [ 1.170951] usb usb1: Product: EHCI Host Controller [ 1.175805] usb usb1: Manufacturer: Linux 4.1.0-oxnas-tld-1 ehci_hcd [ 1.182144] usb usb1: SerialNumber: 40200100.ehci [ 1.187824] hub 1-0:1.0: USB hub found [ 1.191703] hub 1-0:1.0: 2 ports detected [ 1.196697] usbcore: registered new interface driver cdc_acm [ 1.202416] cdc_acm: USB Abstract Control Model driver for USB modems and ISs [ 1.210583] usbcore: registered new interface driver cdc_wdm [ 1.216404] usbcore: registered new interface driver usb-storage [ 1.222666] usbcore: registered new interface driver usbserial [ 1.228556] usbcore: registered new interface driver usbserial_generic [ 1.235153] usbserial: USB Serial support registered for generic [ 1.241571] mousedev: PS/2 mouse device common for all mice [ 1.247296] i2c /dev entries driver [ 1.252195] hidraw: raw HID events driver (C) Jiri Kosina [ 1.257827] usbcore: registered new interface driver usbhid [ 1.263462] usbhid: USB HID core driver [ 1.269132] NET: Registered protocol family 10 [ 1.275258] sit: IPv6 over IPv4 tunneling driver [ 1.281100] NET: Registered protocol family 17 [ 1.285703] Key type dns_resolver registered [ 1.291504] Loading compiled-in X.509 certificates [ 1.300643] Key type encrypted registered [ 1.305459] ubi0: attaching mtd1 [ 1.461150] ubi0: scanning is finished [ 1.470028] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1.479467] ubi0 warning: print_rsvd_warning: cannot reserve enough PEBs for0 [ 1.489999] ata1.00: ATA-9: 25000128-02, 505ABBF0, max UDMA/133 [ 1.495895] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.504483] ubi0: attached mtd1 (name "data", size 114 MiB) [ 1.507499] ata1.00: configured for UDMA/133 [ 1.508049] scsi 0:0:0:0: Direct-Access ATA 25000128-02 BBF0 P5 [ 1.510174] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.) [ 1.510863] sd 0:0:0:0: [sda] Write Protect is off [ 1.511093] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA [ 1.513387] sda: sda1 sda2 sda3 [ 1.516259] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.551598] usb 1-1: new high-speed USB device number 2 using oxnas-ehci [ 1.558328] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes [ 1.565301] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512 [ 1.571996] ubi0: VID header offset: 512 (aligned 512), data offset: 2048 [ 1.578744] ubi0: good PEBs: 912, bad PEBs: 0, corrupted PEBs: 0 [ 1.584757] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 18 [ 1.591959] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image seq0 [ 1.600268] ubi0: available PEBs: 0, total reserved PEBs: 912, PEBs reserved9 [ 1.609418] ubi0: background thread "ubi_bgt0d" started, PID 70 [ 1.623833] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:) [ 1.631600] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 1.640755] devtmpfs: mounted [ 1.644172] Freeing unused kernel memory: 200K (c07ee000 - c0820000) [ 1.712501] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 1.719180] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.726312] usb 1-1: Product: USB2.0 Hub [ 1.731481] hub 1-1:1.0: USB hub found [ 1.735623] hub 1-1:1.0: 4 ports detected Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [ 2.021048] usb 1-1.3: new full-speed USB device number 3 using oxnas-ehci [ 2.397104] usb 1-1.3: New USB device found, idVendor=041e, idProduct=3220 [ 2.407616] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumbe3 [ 2.427640] usb 1-1.3: Product: Sound Blaster Tactic(3D) Sigma [ 2.435184] usb 1-1.3: Manufacturer: Creative Technology Ltd [ 2.442219] usb 1-1.3: SerialNumber: 00052984 [ 2.512122] input: Creative Technology Ltd Sound Blaster Tactic(3D) Sigma as0 [ 2.581596] hid-generic 0003:041E:3220.0001: input,hiddev0,hidraw0: USB HID 3 [....] Starting the hotplug events dispatcher: udevd[ 2.672232] udevd[184]: 5 . ok [....] Synthesizing the initial hotplug events...[ 3.470371] cfg80211: Callin done. [....] Waiting for /dev to be fully populated...[ 4.057011] usbcore: registeo done. [ 5.065912] EXT4-fs (sda2): re-mounted. Opts: (null) [....] Checking root file system...fsck from util-linux 2.20.1 rootfs: clean, 61533/262144 files, 442368/1048576 blocks done. [ 5.280737] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [....] Cleaning up temporary files... /tmp /lib/init/rw. ok [....] Loading kernel modules...done. [ 6.630092] cfg80211: Calling CRDA to update world regulatory domain [....] Activating lvm and md swap...[ 9.166778] Adding 524284k swap on /swapS done. [....] Checking file systems...fsck from util-linux 2.20.1 home: clean, 11/1692432 files, 117472/6763734 blocks done. [....] Mounting local filesystems...[ 9.790136] cfg80211: Calling CRDA to upn done. [....] Activating swapfile swap...done. [....] Cleaning up temporary files.... ok [....] Setting kernel variables ...done. [ 11.226908] random: dd urandom read with 24 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/74:f0:6d:6a:1d:17 Sending on LPF/eth0/74:f0:6d:6a:1d:17 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 12.960023] cfg80211: Calling CRDA to update world regulatory domain [ 16.120005] cfg80211: Calling CRDA to update world regulatory domain [ 17.780736] stmmaceth 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flowx DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.254 bound to 192.168.0.66 -- renewal in 19204 seconds. [ 19.287306] cfg80211: Calling CRDA to update world regulatory domain done. [....] Starting rpcbind daemon.... ok [....] Starting NFS common utilities: statd idmapd. ok [....] Cleaning up temporary files.... ok [....] Setting up ALSA...done. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting NTP server: ntpd. ok [ 22.450173] cfg80211: Calling CRDA to update world regulatory domain [....] Starting system message bus: dbus[....] Starting busybox' syslogd implem. 1681 (syslogd) . ok [....] Starting rpcbind daemon...[....] Already running.. ok . [....] Starting NFS common utilities: statd idmapd. ok [....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. ok [....] Not starting NFS kernel daemon: no exports. ... (warning). [....] Starting OpenBSD Secure Shell server: sshd. ok [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1683 (klogd) . ok Debian GNU/Linux 8 debian ttyS0 debian login:
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L June 20, 2017 06:12PM |
Admin Registered: 13 years ago Posts: 18,564 |
> ## Booting kernel from Legacy Image at 60000000 .. > . > Image Name: Linux-4.4.54-oxnas-tld-1 > Image Type: ARM Linux Kernel Image (uncompres > sed) > Data Size: 4621760 Bytes = 4.4 MiB > Load Address: 60008000 > Entry Point: 60008000 > Verifying Checksum ... OK > ## Flattened Device Tree blob at 61000000 > Booting using the fdt blob at 0x61000000 > Loading Kernel Image ... OK > Loading Device Tree to 67e26000, end 67e2ab78 .
> [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/sda2 rootf2
console=ttyS0,115200n8 root=LABEL=rootfs
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L June 21, 2017 02:24PM |
Registered: 9 years ago Posts: 100 |
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) Boot device: SATA Attempting to set PLLA to 800 MHz ... plla_ctrl0 : 0000030a plla_ctrl1 : 00400000 plla_ctrl2 : 007f0068 plla_ctrl3 : 00000193 PLLA Set Bus 0: OK Device 0: reading bootargs.bin reading u-boot.img reading u-boot.img U-Boot 2015.10-tld-1 (Nov 21 2015 - 01:17:59 -0800) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... ERROR: Invalid USB EP length (9) ERROR: Invalid USB EP length (9) ERROR: Invalid USB EP length (9) ERROR: Invalid USB EP length (9) ERROR: Invalid USB EP length (9) 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Reset IDE: Bus 0: OK Device 0: Model: 25000128-02 Firm: 505ABBF0 Ser#: DSHKSH124404005 Type: Hard Disk Supports 48-bit addressing Capacity: 30533.8 MB = 29.8 GB (62533296 x 512) no USB devices available Partition Map for IDE device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 32768 00008000-01 83 2 34816 8388608 00008000-02 83 3 8423424 54109872 00008000-03 83 loading envs from ide 0 ... reading /boot/uEnv.txt ** Unable to read file /boot/uEnv.txt ** 4621824 bytes read in 830 ms (5.3 MiB/s) 3042611 bytes read in 553 ms (5.2 MiB/s) 7033 bytes read in 29 ms (236.3 KiB/s) ## Booting kernel from Legacy Image at 60500000 ... Image Name: Linux-4.4.54-oxnas-tld-1 Created: 1970-01-01 0:05:03 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4621760 Bytes = 4.4 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 60e00000 ... Image Name: initramfs-4.4.54-oxnas-tld-1 Created: 1970-01-01 0:05:03 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3042547 Bytes = 2.9 MiB Load Address: 60000000 Entry Point: 60000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 62c00000 Booting using the fdt blob at 0x62c00000 Loading Kernel Image ... OK Loading Ramdisk to 67b44000, end 67e2acf3 ... OK Loading Device Tree to 67b3f000, end 67b43b78 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.54-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) 7 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Pogoplug Pro [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 117720K/131072K available (6410K kernel code, 288K rwdata, 1908K rodata, 224K ini) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0827e14 (8320 kB) [ 0.000000] .init : 0xc0828000 - 0xc0860000 ( 224 kB) [ 0.000000] .data : 0xc0860000 - 0xc08a8378 ( 289 kB) [ 0.000000] .bss : 0xc08a8378 - 0xc08e6350 ( 248 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 191s [ 0.000007] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns [ 0.000171] Console: colour dummy device 80x30 [ 0.000207] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440) [ 0.050030] pid_max: default: 32768 minimum: 301 [ 0.050211] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050229] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051092] Initializing cgroup subsys net_cls [ 0.051176] CPU: Testing write buffer coherency: ok [ 0.051622] Setting up static identity map for 0x60008220 - 0x60008258 [ 0.190149] Brought up 2 CPUs [ 0.190172] SMP: Total of 2 processors activated (638.97 BogoMIPS). [ 0.191004] devtmpfs: initialized [ 0.196723] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275s [ 0.196771] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.197099] prandom: seed boundary self test passed [ 0.201789] prandom: 100 self tests passed [ 0.201817] pinctrl core: initialized pinctrl subsystem [ 0.202700] NET: Registered protocol family 16 [ 0.203274] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.230018] cpuidle: using governor ladder [ 0.260014] cpuidle: using governor menu [ 0.265244] gpio-oxnas 44000000.gpio: at address c8848000 [ 0.265676] gpio-oxnas 44100000.gpio: at address c884a000 [ 0.266288] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver [ 0.279823] vgaarb: loaded [ 0.280407] SCSI subsystem initialized [ 0.281338] usbcore: registered new interface driver usbfs [ 0.281448] usbcore: registered new interface driver hub [ 0.281612] usbcore: registered new device driver usb [ 0.281809] pps_core: LinuxPPS API ver. 1 registered [ 0.281825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.281873] PTP clock support registered [ 0.284134] clocksource: Switched to clocksource rps_clocksource_timer [ 0.304186] NET: Registered protocol family 2 [ 0.305111] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.305157] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.305195] TCP: Hash tables configured (established 1024 bind 1024) [ 0.305292] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.305338] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.305615] NET: Registered protocol family 1 [ 0.306173] RPC: Registered named UNIX socket transport module. [ 0.306193] RPC: Registered udp transport module. [ 0.306204] RPC: Registered tcp transport module. [ 0.306216] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.306629] Unpacking initramfs... [ 0.636884] Freeing initrd memory: 2972K (c7b44000 - c7e2b000) [ 0.638451] Initialise system trusted keyring [ 0.653463] zbud: loaded [ 0.659164] NFS: Registering the id_resolver key type [ 0.659225] Key type id_resolver registered [ 0.659238] Key type id_legacy registered [ 0.659287] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.659312] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.660408] fuse init (API version 7.23) [ 0.662538] Key type big_key registered [ 0.749184] Key type asymmetric registered [ 0.749214] Asymmetric key parser 'x509' registered [ 0.749350] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.749378] io scheduler noop registered [ 0.749399] io scheduler deadline registered [ 0.749483] io scheduler cfq registered (default) [ 0.750336] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.751915] console [ttyS0] disabled [ 0.752017] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A [ 1.273689] console [ttyS0] enabled [ 1.412426] loop: module loaded [ 1.417064] nand: No NAND device found [ 1.421445] oxnas-gmac 40400000.ethernet: no reset control found [ 1.427432] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 1.432501] Ring mode enabled [ 1.435540] DMA HW capability register supported [ 1.440071] Enhanced/Alternate descriptors [ 1.444408] Enabled extended descriptors [ 1.448394] RX Checksum Offload Engine supported (type 2) [ 1.453870] TX Checksum insertion supported [ 1.458114] Wake-Up On Lan supported [ 1.461775] Enable RX Mitigation via HW Watchdog Timer [ 1.488133] libphy: stmmac: probed [ 1.491601] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active [ 1.498019] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03) [ 1.504837] PPP generic driver version 2.4.2 [ 1.509719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.516303] ehci-pci: EHCI PCI platform driver [ 1.521315] usbcore: registered new interface driver cdc_acm [ 1.526947] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.535080] usbcore: registered new interface driver cdc_wdm [ 1.540925] usbcore: registered new interface driver usb-storage [ 1.547087] usbcore: registered new interface driver usbserial [ 1.553036] usbcore: registered new interface driver usbserial_generic [ 1.559600] usbserial: USB Serial support registered for generic [ 1.566067] mousedev: PS/2 mouse device common for all mice [ 1.571860] i2c /dev entries driver [ 1.576750] hidraw: raw HID events driver (C) Jiri Kosina [ 1.582461] usbcore: registered new interface driver usbhid [ 1.588008] usbhid: USB HID core driver [ 1.593871] NET: Registered protocol family 10 [ 1.610595] sit: IPv6 over IPv4 tunneling driver [ 1.616245] NET: Registered protocol family 17 [ 1.620971] Key type dns_resolver registered [ 1.626575] registered taskstats version 1 [ 1.630750] Loading compiled-in X.509 certificates [ 1.635660] zswap: loaded using pool lzo/zbud [ 1.660124] Key type encrypted registered [ 1.667317] Freeing unused kernel memory: 224K (c0828000 - c0860000) Loading, please wait... [ 1.809461] udevd[92]: starting version 175 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Waiting for root file system ... done. Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/disk/by-label/rootfs does not exist. Dropping to a shell! modprobe: module i8042 not found in modules.dep modprobe: module uhci-hcd not found in modules.dep modprobe: module ohci-hcd not found in modules.dep BusyBox v1.20.2 (Debian 1:1.20.0-7) built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off (initramfs) cat /proc6cmdline cat: can't open '/proc6cmdline': No such file or directory (initramfs) cat /proc/cmdline console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 (initramfs) ls /dev block ppp tty27 tty52 btrfs-control ptmx tty28 tty53 char pts tty29 tty54 console random tty3 tty55 cpu_dma_latency stderr tty30 tty56 fd stdin tty31 tty57 full stdout tty32 tty58 fuse tty tty33 tty59 input tty0 tty34 tty6 kmem tty1 tty35 tty60 kmsg tty10 tty36 tty61 loop-control tty11 tty37 tty62 loop0 tty12 tty38 tty63 loop1 tty13 tty39 tty7 loop2 tty14 tty4 tty8 loop3 tty15 tty40 tty9 loop4 tty16 tty41 ttyS0 loop5 tty17 tty42 ubi_ctrl loop6 tty18 tty43 urandom loop7 tty19 tty44 vcs mapper tty2 tty45 vcs1 mem tty20 tty46 vcsa memory_bandwidth tty21 tty47 vcsa1 net tty22 tty48 vga_arbiter network_latency tty23 tty49 zero network_throughput tty24 tty5 null tty25 tty50 port tty26 tty51 (initramfs)
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L June 21, 2017 03:42PM |
Admin Registered: 13 years ago Posts: 18,564 |
rootdelay=10
rootwait
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L June 22, 2017 01:01AM |
Registered: 9 years ago Posts: 100 |
root@debian:/# uname -r 4.4.54-oxnas-tld-1
[ 98.557393] sata_oxnas: resetting SATA core [ 98.571842] ata1: exception Emask 0x10 SAct 0x0 SErr 0x20000 action 0xe frozen [ 98.579038] ata1: SError: { PHYInt } [ 98.582661] ata1: hard resetting link [ 99.490158] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 99.497551] ata1.00: ATA-9: 25000128-02, 505ABBF0, max UDMA/133 [ 99.503503] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 99.517550] ata1.00: configured for UDMA/133 [ 99.521861] ata1: EH complete [ 99.540538] scsi 0:0:0:0: Direct-Access ATA 25000128-02 BBF0 PQ: 0 ANSI: 5 [ 99.550389] sd 0:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 99.559639] sd 0:0:0:0: [sdb] Write Protect is off [ 99.564515] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 99.564864] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 99.576990] sdb: sdb1 sdb2 sdb3 [ 99.584028] sd 0:0:0:0: [sdb] Attached SCSI disk
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L June 22, 2017 05:10PM |
Registered: 9 years ago Posts: 100 |
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS DRAM: 128 MiB IDE: Bus 0: OK Device 0: Model: 25000128-02 Firm: 505ABBF0 Ser#: DSHKSH124404005 Type: Hard Disk Supports 48-bit addressing Capacity: 30533.8 MB = 29.8 GB (62533296 x 512) NAND: 128 MiB reading u-boot.env In: serial Out: serial Err: serial Net: mii0 Hit any key to stop autoboot: 0 OX820 # printenv autoload=no baudrate=115200 bootcmd=run dt_bootcmd_ide; reset bootdelay=10 console=console=ttyS0,115200n8 dt_bootcmd_ide=ide info; run dt_ide_bootcmd; ide reset dt_bootm=bootm $uimage_addr $uinitrd_addr $dtb_addr dt_ide_boot=run dt_load_uimage; run dt_load_initrd; run dt_load_dtb; run dt_bootm dt_ide_bootcmd=run ide_set_bootargs; run dt_ide_boot dt_load_dtb=ext2load ide 0:2 $dtb_addr /boot/dts/ox820-pogoplug-classic.dtb dt_load_initrd=ext2load ide 0:2 $uinitrd_addr /boot/uInitrd dt_load_uimage=ext2load ide 0:2 $uimage_addr /boot/uImage dtb_addr=0x62c00000 ethact=mii0 ethaddr=00:25:31:02:98:01 fdtaddr=61000000 ide_set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 ipaddr=10.0.0.71 keypressed=1 mtdids=nand0=41000000.nand mtdparts=mtdparts=41000000.nand:14m(boot),-(data) netcon=echo switch to net console;setenv stderr nc;setenv stdin nc;setenv stdout nc;echo switch to net ce serialcon=echo switch to serial console;setenv stderr serial;setenv stdin serial;setenv stdout serial;ece stderr=serial stdin=serial stdout=serial uimage_addr=0x60500000 uinitrd_addr=0x60e00000 updboot=bootp;tftp 60000000 u-boot.img;ide write 60000000 400 400 Environment size: 1266/16380 bytes OX820 #
[ 115.515166] sata_oxnas: resetting SATA core [ 115.529784] ata1: exception Emask 0x10 SAct 0x0 SErr 0x20000 action 0xe frozen [ 115.537018] ata1: SError: { PHYInt } [ 115.540881] ata1: hard resetting link [ 116.450168] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 116.467281] ata1.00: ATA-9: INTEL SSDSC2BF180A4L, LADi, max UDMA/133 [ 116.473656] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 0/32) root@debian:~# [ 131.480176] ata1.00: qc timeout (cmd 0xef) [ 131.484257] sata_oxnas: resetting SATA core [ 131.840168] ata1.00: failed to set xfermode (err_mask=0x5) [ 131.845647] ata1: hard resetting link [ 132.350167] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 147.370178] ata1.00: qc timeout (cmd 0xef) [ 147.374259] sata_oxnas: resetting SATA core [ 147.730181] ata1.00: failed to set xfermode (err_mask=0x5) [ 147.735656] ata1.00: limiting speed to UDMA/133:PIO3 [ 147.740904] ata1: hard resetting link [ 148.250173] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 163.270177] ata1.00: qc timeout (cmd 0xef) [ 163.274260] sata_oxnas: resetting SATA core [ 163.630177] ata1.00: failed to set xfermode (err_mask=0x5) [ 163.635648] ata1.00: disabled [ 163.638617] sata_oxnas: resetting SATA core [ 163.653376] ata1: exception Emask 0x10 SAct 0x0 SErr 0x20000 action 0xe frozen t4 [ 163.660856] ata1: SError: { PHYInt } [ 163.664437] ata1: hard resetting link [ 164.570178] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 164.587292] ata1.00: ATA-9: INTEL SSDSC2BF180A4L, LADi, max UDMA/133 [ 164.593664] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 0/32)
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L June 22, 2017 07:46PM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L October 06, 2017 05:12AM |
Registered: 9 years ago Posts: 100 |
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L October 06, 2017 05:09PM |
Admin Registered: 13 years ago Posts: 18,564 |
Quote
first post
the error is around the sata as i see some timeouts in the log:
[ 3.070003] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.087119] ata1.00: ATA-9: INTEL SSDSC2BF180A4L, LADi, max UDMA/133
[ 3.093496] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 18.100001] ata1.00: qc timeout (cmd 0xef)
[ 18.104084] sata_oxnas: resetting SATA core
[ 18.460001] ata1.00: failed to set xfermode (err_mask=0x5)
[ 18.969999] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 33.990005] ata1.00: qc timeout (cmd 0xef)
Re: Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L October 14, 2017 02:36AM |
Registered: 9 years ago Posts: 100 |