Welcome! Log In Create A New Profile

uBoot not booting my usb anymore

Posted by mist

mist

uBoot not booting my usb anymore
December 13, 2010 04:24PM

Hi there,

uBoot is not booting into my usb anymore and I have no Idea why -.-

Some weeks ago I unplugged my dockstar because I didn't have the time to use it and today I wanted to play with it but it does not boot onto my USB anymore :( I always get the linux from the Flash. Can you please help me?

Here is what netcat says without usb attached:

U-Boot 2010.09 (Oct 23 2010 - 11:49:22)
Marvell-Dockstar/Pogoplug by Jeff Doozan
Hit any key to stop autoboot:  0  
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
** Block device usb 0 not supported

** Invalid boot device **
Creating 1 MTD partitions on "nand0":
0x000002500000-0x000010000000 : "mtd=3"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=3"
UBI: MTD device size:            219 MiB
UBI: number of good PEBs:        1751
UBI: number of bad PEBs:         1
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     0
UBI: available PEBs:             1730
UBI: total number of reserved PEBs: 21
UBI: number of PEBs reserved for bad PEB handling: 17
UBI: max/mean erase counter: 1/1
UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19
Error reading superblock on volume 'ubi:rootfs'!
** Block device usb 0 not supported
** Block device usb 1 not supported
** Block device usb 2 not supported
** Block device usb 3 not supported
** Block device usb 0 not supported
** Block device usb 0 not supported
Wrong Image Format for bootm command
ERROR: can't get kernel image!
stopping USB..
### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000
Scanning JFFS2 FS: .....  read_nand_cached: error reading nand off 0x71e400 size 8192 bytes
read_nand_cached: error reading nand off 0x720400 size 8192 bytes
read_nand_cached: error reading nand off 0x722400 size 8192 bytes
read_nand_cached: error reading nand off 0x724400 size 8192 bytes
read_nand_cached: error reading nand off 0x726400 size 8192 bytes
read_nand_cached: error reading nand off 0x728400 size 8192 bytes
read_nand_cached: error reading nand off 0x72a400 size 8192 bytes
read_nand_cached: error reading nand off 0x72c400 size 8192 bytes
read_nand_cached: error reading nand off 0x72e400 size 8192 bytes
read_nand_cached: error reading nand off 0x730400 size 8192 bytes
read_nand_cached: error reading nand off 0x732400 size 8192 bytes
read_nand_cached: error reading nand off 0x734400 size 8192 bytes
read_nand_cached: error reading nand off 0x736400 size 8192 bytes
read_nand_cached: error reading nand off 0x738400 size 8192 bytes
read_nand_cached: error reading nand off 0x73a400 size 8192 bytes
read_nand_cached: error reading nand off 0x73c400 size 8192 bytes
read_nand_cached: error reading nand off 0x73e400 size 8192 bytes                                                                                 .... done.
read_nand_cached: error reading nand off 0x71fe00 size 8192 bytes
off = 0x71f5f8 magic 0x1985 type 0xe002 node.totlen = 2564
### JFFS2 load complete: 524288 bytes loaded to 0x800000
## Starting application at 0x00800200 ...

And here it what it says with USB attached.

U-Boot 2010.09 (Oct 23 2010 - 11:49:22)
Marvell-Dockstar/Pogoplug by Jeff Doozan
Hit any key to stop autoboot:  0 
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
** Block device usb 0 not supported

** Invalid boot device **
Creating 1 MTD partitions on "nand0":
0x000002500000-0x000010000000 : "mtd=3"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=3"
UBI: MTD device size:            219 MiB
UBI: number of good PEBs:        1751
UBI: number of bad PEBs:         1
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     0
UBI: available PEBs:             1730
UBI: total number of reserved PEBs: 21
UBI: number of PEBs reserved for bad PEB handling: 17
UBI: max/mean erase counter: 1/1
UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19
Error reading superblock on volume 'ubi:rootfs'!
** Block device usb 0 not supported
** Block device usb 1 not supported
** Block device usb 2 not supported
** Block device usb 3 not supported
** Block device usb 0 not supported
** Block device usb 0 not supported
Wrong Image Format for bootm command
ERROR: can't get kernel image!
stopping USB..
### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000
Scanning JFFS2 FS: .....  read_nand_cached: error reading nand off 0x71e400 size 8192 bytes
read_nand_cached: error reading nand off 0x720400 size 8192 bytes
read_nand_cached: error reading nand off 0x722400 size 8192 bytes
read_nand_cached: error reading nand off 0x724400 size 8192 bytes
read_nand_cached: error reading nand off 0x726400 size 8192 bytes
read_nand_cached: error reading nand off 0x728400 size 8192 bytes
read_nand_cached: error reading nand off 0x72a400 size 8192 bytes
read_nand_cached: error reading nand off 0x72c400 size 8192 bytes
read_nand_cached: error reading nand off 0x72e400 size 8192 bytes
read_nand_cached: error reading nand off 0x730400 size 8192 bytes
read_nand_cached: error reading nand off 0x732400 size 8192 bytes
read_nand_cached: error reading nand off 0x734400 size 8192 bytes
read_nand_cached: error reading nand off 0x736400 size 8192 bytes
read_nand_cached: error reading nand off 0x738400 size 8192 bytes
read_nand_cached: error reading nand off 0x73a400 size 8192 bytes
read_nand_cached: error reading nand off 0x73c400 size 8192 bytes
read_nand_cached: error reading nand off 0x73e400 size 8192 bytes                                                                                 .... done.
read_nand_cached: error reading nand off 0x71fe00 size 8192 bytes
off = 0x71f5f8 magic 0x1985 type 0xe002 node.totlen = 2564
### JFFS2 load complete: 524288 bytes loaded to 0x800000
## Starting application at 0x00800200 ...

BTW: The usb is mountable by my laptop.

Thanks a lot!
mist

Reply Quote

twinclouds

Re: uBoot not booting my usb anymore
December 19, 2010 12:01PM

Registered: 13 years ago
Posts: 406

I had the same problem but for different causes. Anyhow I found my environment parameters were corrupted. One key parameter, if you use Jeff's uBoot, is bootcmd. It should be:
"bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset". If not you need to reset it to this value using"
bootcmd "usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset"

Reply Quote

Newer Topic Older Topic

Print View RSS

Author:

Your Email:

Subject:

Help information

BBcode help

Spam prevention:

Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.

Enter code:

Message: