How to restore uboot and rootfs of a partially bricked Segate Goflex Net January 14, 2017 03:01PM |
Registered: 11 years ago Posts: 214 |
Re: How to flash new uboot from boot console January 14, 2017 04:25PM |
Admin Registered: 13 years ago Posts: 18,550 |
Quote
This device does not support serial booting. Is there any other posibility?
Re: How to flash new uboot from boot console January 15, 2017 12:11AM |
Registered: 11 years ago Posts: 214 |
ide reset ext2load ide 0:1 0x6400000 /uboot.2016.05-tld-1.goflexnet.mtd0.kwb nand erase 0x0 0x80000 nand write.e 0x6400000 0x0 0x80000 nand read.e 0x6500000 0x0 0x80000 cmp.b 0x6400000 0x6500000 0x80000The device can be booted now.
Re: How to flash new uboot from boot console January 15, 2017 07:14AM |
Admin Registered: 13 years ago Posts: 18,550 |
Quote
Updated 20 Feb 2016:
This Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 is to keep in sync with kernel Linux-4.4.0-kirkwood-tld-1.
Re: How to flash new uboot from boot console January 15, 2017 07:19AM |
Admin Registered: 13 years ago Posts: 18,550 |
Re: How to flash new uboot from boot console January 15, 2017 07:20AM |
Registered: 11 years ago Posts: 214 |
Re: How to flash new uboot from boot console January 15, 2017 03:19PM |
Admin Registered: 13 years ago Posts: 18,550 |
Re: How to flash new uboot from boot console January 16, 2017 02:52AM |
Registered: 11 years ago Posts: 214 |
Re: How to flash new uboot from boot console January 16, 2017 03:17AM |
Admin Registered: 13 years ago Posts: 18,550 |
Quote
Booting Debian on Pogoplug
How to set up U-Boot for booting in multiple drives configuration
Backup and Restore NAND mtds
UART Booting HowTo for Selected Kirkwood Devices
Migrating from Arch to Debian?
How to boot new Debian rootfs using stock u-boot tftp
How to clone a rootfs from one Kirkwood box to another: Step 1 and Step 2
nanddump --noecc --omitoob -f mtd2 /dev/mtd2
flash_erase /dev/mtd2 0 0 or flash_eraseall /dev/mtd2and then (the default is obmitoob):
nandwrite --noecc /dev/mtd2 mtd2
Quote
Are there some commands in the serial console to deal with bad sectors and try to recover the information form such sectors?
Quote
Do you think that the ubi file form Goflex Home fits to Goflex Net?
Re: How to flash new uboot from boot console January 16, 2017 03:12PM |
Registered: 11 years ago Posts: 214 |
... [ 2.320000] sdhci: Secure Digital Host Controller Interface driver [ 2.320000] sdhci: Copyright(c) Pierre Ossman [ 2.330000] usbcore: registered new interface driver usbhid [ 2.330000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 2.340000] TCP cubic registered [ 2.340000] NET: Registered protocol family 1 [ 2.350000] NET: Registered protocol family 17 [ 2.350000] md: Autodetecting RAID arrays. [ 2.360000] md: autorun ... [ 2.360000] md: ... autorun DONE. [ 3.500000] Empty flash at 0x00e54e48 ends at 0x00e55000 [ 7.300000] VFS: Mounted root (jffs2 filesystem) readonly. [ 7.310000] Freeing init memory: 124K [ 7.820000] JFFS2 compression type 0x07 not available. [ 7.820000] Error: jffs2_decompress returned -5 [ 7.830000] JFFS2 compression type 0x07 not available. [ 7.830000] Error: jffs2_decompress returned -5 [ 7.840000] JFFS2 compression type 0x07 not available. [ 7.840000] Error: jffs2_decompress returned -5 [ 7.850000] JFFS2 compression type 0x07 not available. [ 7.850000] Error: jffs2_decompress returned -5 [ 7.860000] JFFS2 compression type 0x07 not available. [ 7.870000] Error: jffs2_decompress returned -5 /sbin/init[ 7.870000] Kernel panic - not syncing: Attempted to kill init! : error while lo[ 7.880000] Scheduling watchdog timeout to force reboot... ading shared libraries: /usr/lib/libgcc_s.so.1: cannot read file data: Input/output errorSeams that it is still damaged.
Re: How to flash new uboot from boot console January 17, 2017 03:11PM |
Admin Registered: 13 years ago Posts: 18,550 |
Quote
[ 7.820000] JFFS2 compression type 0x07 not available.
[ 7.820000] Error: jffs2_decompress returned -5
[ 7.830000] JFFS2 compression type 0x07 not available.
[ 7.830000] Error: jffs2_decompress returned -5
[ 7.840000] JFFS2 compression type 0x07 not available.
[ 7.840000] Error: jffs2_decompress returned -5
[ 7.850000] JFFS2 compression type 0x07 not available.
[ 7.850000] Error: jffs2_decompress returned -5
[ 7.860000] JFFS2 compression type 0x07 not available.
[ 7.870000] Error: jffs2_decompress returned -5
Re: How to flash new uboot from boot console January 17, 2017 07:38PM |
Admin Registered: 13 years ago Posts: 18,550 |
Re: How to flash new uboot from boot console January 18, 2017 07:22AM |
Registered: 11 years ago Posts: 214 |
Re: How to flash new uboot from boot console January 18, 2017 02:50PM |
Admin Registered: 13 years ago Posts: 18,550 |
Re: How to flash new uboot from boot console January 21, 2017 09:08AM |
Registered: 11 years ago Posts: 214 |
Re: How to flash new uboot from boot console January 21, 2017 03:40PM |
Admin Registered: 13 years ago Posts: 18,550 |
Re: How to flash new uboot from boot console February 01, 2017 02:23PM |
Registered: 11 years ago Posts: 214 |
Re: How to flash new uboot from boot console February 01, 2017 02:52PM |
Admin Registered: 13 years ago Posts: 18,550 |
Re: How to flash new uboot from boot console March 04, 2017 11:29AM |
Registered: 7 years ago Posts: 67 |