IPGK Failure

Thanks for all of your hard work on this Jeff! I do have an issue though with V2 that I'm hoping you can help me with.

when running ipkg-cl (both with the filesystem ro and rw) every command is met with "Successfully Terminated" but it doesn't actually DO anything. I cannot 'update', 'list', nor 'search'

ipkg-cl by itself does show me the help but that's it.

Any ideas?

Thanks!

Edit: I just realized that handhelds.org is offline and has been since mid-feb. Is this where the package repository was being stored? If so, is there an alternative package management system that we can use?



Edited 1 time(s). Last edit at 03/26/2011 03:22PM by manxam.

Hmmm, posted under rescue and had not yet found ipkg-cl.
I have now, and it runs and configures, but the binaries it installs from optware do not run.
Is there another repository that will run?

TJ

You'd need something uclibc-based feed ...

=====================================================

• My Weather Station: (Pogoplug E02/Debianized 1-Wire Weather-Station/Cam)
• Linux 3.3.2 for Kirkwood Debian package
• Newer U-Boot for Pogoplug E01/E02, Dockstar, GoFlex Net/Home
• Rescue V2.8.1 for Pogoplug, Dockstar, GoFlex Net/Home, Zyxel NSA320 & many others
• Kirkwood Downloads (via my Dropbox public folder)
• davy's Github Repo's AFPDplug, SMBPlug, OWFSPlug, Cloudprint, Optware-DG, uBoot ...