Welcome! Log In Create A New Profile

Mele Android 4.0 SD upgrade - serial output!

Posted by gnexus

gnexus

Mele Android 4.0 SD upgrade - serial output!
July 08, 2012 10:39AM

Moderator
Registered: 1 year ago
Posts: 392

Android 2.3 would not boot today. I had to connect the serial cable to figure out why.

The Android 2.3 was locking up at the init:

[ 2860.880000] request_suspend_state: wakeup (0->0) at 2860882947354 (2010-01-01 00:58:32.999940657 UTC)
[ 2860.890000] init: untracked pid 5264 exited
[ 2860.910000] init: untracked pid 5265 exited
[ 2865.860000] request_suspend_state: wakeup (0->0) at 2865862286843 (2010-01-01 00:58:37.979280271 UTC)

The Android 4.0 PhoenixCard SD image from Mele also did not work. It showed the following error

HELLO! BOOT0 is starting!
boot0 version : 1.3.0
dram size =512
The size of Boot1 is 0x00020000.
Succeed in loading boot1 from sdmmc flash.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[       0.267] boot1 version : 1.3.1b
[       0.267] pmu type = 3
[       0.268] bat vol = 0
[       0.295] axi:ahb:apb=3:2:2
[       0.295] set dcdc2=1400, clock=1008 successed
[       0.297] key
[       0.309] no key found
[       0.309] flash init start
[       0.331] flash init finish
[       0.332] fs init ok
[       0.333] fattype FAT16
[       0.333] fs mount ok
[       0.342] script finish
[       0.343] power finish
[       0.367] Sprite start
[       0.367] 0
[       0.369] display init
[       0.369] try gpio config
[       0.371] gpio start
[       0.373] zdisk mount
[       0.469] unkown fs type in the input file, FS_FAIL!
[       0.469] log error: cant find user disk
[       0.473] mbr fetch
[       0.483] WRN:L134(CardMain.c):unable to get mbr info

I downloaded a dd image from Lundman. That one worked. Here is the serial output from the upgrade:

Welcome to minicom 2.5





OPTIONS: I18n 


Compiled on Jan 14 2012, 12:40:23.


Port /dev/ttyUSB0





Press CTRL-A Z for help on special keys                                                    


                                                                                           


HELLO! BOOT0 is starting!                                                                  


boot0 version : 1.3.0                                                                      


dram size =512                                                                             


The size of Boot1 is 0x00020000.


Succeed in loading boot1 from sdmmc flash.


Ready to disable icache.


Succeed in loading Boot1.


Jump to Boot1.


[       0.267] boot1 version : 1.3.1b


[       0.267] pmu type = 3


[       0.268] bat vol = 0


[       0.295] axi:ahb:apb=3:2:2


[       0.295] set dcdc2=1400, clock=1008 successed


[       0.297] key


[       0.309] no key found


[       0.309] flash init start


[       0.331] flash init finish


[       0.332] fs init ok


[       0.333] fattype FAT16


[       0.333] fs mount ok


[       0.342] script finish


[       0.343] power finish


[       0.366] Sprite start


[       0.366] 0


[       0.368] display init


[       0.368] try gpio config


[       0.370] gpio start


[       0.373] zdisk mount


[       0.376] fattype FAT32


[       0.378] zdisk mount ok


[       0.385] log file name m:\slog0.txt


[       0.756] log file m:\slog0.txt open ok


[       0.756] mbr fetch


[       0.758] ERR: display driver not open yet


[       0.762] NB1 : enter NFB_Init


[       0.765] NB1 : enter phy init


[       0.768] NFC Randomizer start. 


[       0.772] [SCAN_DBG] Nand flash chip id is:0x0x0000002c 0x0x00000068 0x0x00000004 0x0x00000000 0x0x4081f008 0x0x0000004a


[       0.783] Nand Unique ID of chip 0 is : 


[       0.787] 0x000000ee, 0x00000092, 0x000000dd, 0x00000000


[       0.792] 0x00000061, 0x00000078, 0x000000c0, 0x00000000


[       0.798] 0x000000ff, 0x00000000, 0x000000ff, 0x00000000


[       0.803] 0x000000ff, 0x00000000, 0x000000ff, 0x00000000


[       0.809] 


[       0.811] 0x00000011, 0x0000006d, 0x00000022, 0x00000000


[       0.816] 0x0000009e, 0x00000087, 0x0000003f, 0x00000000


[       0.822] 0x00000000, 0x000000ff, 0x00000000, 0x00000000


[       0.827] 0x00000000, 0x000000ff, 0x00000000, 0x00000000


[       0.833] 


[       0.834] 





[       0.836] [SCAN_DBG] ==============Nand Architecture Parameter==============


[       0.843] [SCAN_DBG]    Nand Chip ID:         0x0x4a04682c 0x0xffffffff


[       0.850] [SCAN_DBG]    Nand Chip Count:      0x0x00000001


[       0.856] [SCAN_DBG]    Nand Chip Connect:    0x0x00000001


[       0.862] [SCAN_DBG]    Nand Rb Connect Mode:      0x0x00000001


[       0.868] [SCAN_DBG]    Sector Count Of Page: 0x0x00000008


[       0.874] [SCAN_DBG]    Page Count Of Block:  0x0x00000100


[       0.879] [SCAN_DBG]    Block Count Of Die:   0x0x00001000


[       0.885] [SCAN_DBG]    Plane Count Of Die:   0x0x00000002


[       0.891] [SCAN_DBG]    Die Count Of Chip:    0x0x00000001


[       0.896] [SCAN_DBG]    Bank Count Of Chip:   0x0x00000001


[       0.902] [SCAN_DBG]    Optional Operation:   0x0x00000208


[       0.908] [SCAN_DBG]    Access Frequence:     0x0x0000001e


[       0.914] [SCAN_DBG]    ECC Mode:             0x0x00000002


[       0.919] [SCAN_DBG]    Read Retry Type:      0x0x00000000


[       0.925] [SCAN_DBG]    DDR Type:             0x0x00000000


[       0.931] [SCAN_DBG] =======================================================





[       0.938] [SCAN_DBG] ==============Optional Operaion Parameter==============


[       0.946] [SCAN_DBG]    MultiPlaneReadCmd:      0x0x00000000, 0x0x00000030


[       0.953] [SCAN_DBG]    MultiPlaneWriteCmd:     0x0x00000011, 0x0x00000080


[       0.960] [SCAN_DBG]    MultiPlaneCopyReadCmd:  0x0x00000000, 0x0x00000000, 0x0x00000035


[       0.968] [SCAN_DBG]    MultiPlaneCopyWriteCmd: 0x0x00000085, 0x0x00000011, 0x0x00000080


[       0.976] [SCAN_DBG]    MultiPlaneStatusCmd:    0x0x00000070


[       0.982] [SCAN_DBG]    InterBnk0StatusCmd:     0x0x00000078


[       0.988] [SCAN_DBG]    InterBnk1StatusCmd:     0x0x00000078


[       0.994] [SCAN_DBG]    BadBlockFlagPosition:   0x0x00000001


[       1.000] [SCAN_DBG]    MultiPlaneBlockOffset:  0x0x00000001


[       1.006] [SCAN_DBG] =======================================================


[       1.013] NB1 : nand phy init ok


[       1.017] 


[       1.018] [FORMAT_DBG] ===========Logical Architecture Paramter===========


[       1.025] [FORMAT_DBG]    Logic Block Count of Zone:  0x0x000003b6


[       1.032] [FORMAT_DBG]    Page Count of Logic Block:  0x0x00000100


[       1.038] [FORMAT_DBG]    Sector Count of Logic Page: 0x0x00000010


[       1.045] [FORMAT_DBG]    Zone Count of Die:          0x0x00000002


[       1.051] [FORMAT_DBG] ===================================================


[       1.058] [FORMAT_DBG] Search the block mapping table on DIE 0x0x00000000


[       1.067] [FORMAT_DBG] Find the table block 7 for zone 0x0x00000000 of die 0x0x00000000, but the table is invalid!


[       1.077] [FORMAT_DBG] Find the table block 8 for zone 0x0x00000001 of die 0x0x00000000, but the table is invalid!


[       1.097] [FORMAT_DBG] Search block mapping table for die 0x0x00000000 failed!


[       1.099] PHY_PageReadSpare : too much ecc err,bank 0x00000000 block 0x00000000,page 0x00000001 


[       1.108] PHY_PageReadSpare : too much ecc err,bank 0x00000000 block 0x00000000,page 0x00000000 


[       1.143] [FORMAT_DBG] Find a bad block (NO. 0x0x0000002d) in the Die 0x0x00000000


[       2.397] [FORMAT_DBG] Find a bad block (NO. 0x0x000007ff) in the Die 0x0x00000000


[       2.409] 


[       2.409] [FORMAT_DBG] ================== Die information ================


[       2.412] [FORMAT_DBG]    Die number:         0x0x00000000


[       2.418] [FORMAT_DBG]    Super block count:  0x0x00000800


[       2.423] [FORMAT_DBG]    Free block count:   0x0x00000682


[       2.429] [FORMAT_DBG]    Bad block count:    0x0x00000002


[       2.435] [FORMAT_DBG] ---------------------------------------------------


[       2.442] [FORMAT_DBG] ZoneNum:    0x0x00000000


[       2.447] [FORMAT_DBG]    Data block Count:    0x0x00000141


[       2.453] [FORMAT_DBG]    Free block Count:    0x0x00000000


[       2.458] [FORMAT_DBG]    Log block table: 


[       2.463]        [Index]             [LogicalBlk]         [LogBlk]        [DataBlk]


[       2.471]       0x00000000           0x000003aa          0x0000071d        0x426fe668


[       2.479]       0x00000001           0x00000098          0x000006c7        0x426fe668


[       2.487]       0x00000002           0x00000008          0x00000714        0x426fe668


[       2.495]       0x00000003           0x0000000b          0x0000075a        0x426fe668


[       2.503]       0x00000004           0x00000011          0x0000009d        0x426fe668


[       2.511]       0x00000005           0x00000018          0x0000076f        0x426fe668


[       2.519]       0x00000006           0x0000000c          0x000006f0        0x426fe668


[       2.527]       0x00000007           0x000003ac          0x000007b7        0x426fe668


[       2.535]       0x00000008           0x00000050          0x000007bb        0x426fe668


[       2.543]       0x00000009           0x000003a9          0x000006c3        0x426fe668


[       2.551]       0x0000000a           0x00000099          0x000007e0        0x426fe668


[       2.559]       0x0000000b           0x00000012          0x000007df        0x426fe668


[       2.567]       0x0000000c           0x0000000e          0x000007e9        0x426fe668


[       2.575]       0x0000000d           0x00000010          0x000007ec        0x426fe668


[       2.583]       0x0000000e           0x0000000f          0x00000770        0x426fe668


[       2.592]       0x0000000f           0x00000013          0x000007f9        0x426fe668


[       2.600] [FORMAT_DBG] ---------------------------------------------------


[       2.607] [FORMAT_DBG] ZoneNum:    0x0x00000001


[       2.611] [FORMAT_DBG]    Data block Count:    0x0x00000012


[       2.617] [FORMAT_DBG]    Free block Count:    0x0x00000000


[       2.623] [FORMAT_DBG]    Log block table: 


[       2.627]        [Index]             [LogicalBlk]         [LogBlk]        [DataBlk]


[       2.635]       0x00000000           0x00000040          0x0000072b        0x426fe668


[       2.643]       0x00000001           0x0000003e          0x00000748        0x426fe668


[       2.651]       0x00000002           0x0000003d          0x0000074d        0x426fe668


[       2.660]       0x00000003           0x0000003b          0x0000077f        0x426fe668


[       2.668]       0x00000004           0x0000003a          0x00000793        0x426fe668


[       2.676]       0x00000005           0x00000043          0x000007a3        0x426fe668


[       2.684]       0x00000006           0x00000039          0x000007ad        0x426fe668


[       2.692]       0x00000007           0x00000042          0x000007b5        0x426fe668


[       2.700]       0x00000008           0x00000038          0x000007c7        0x426fe668


[       2.708]       0x00000009           0x00000041          0x000007d4        0x426fe668


[       2.716]       0x0000000a           0x00000037          0x000007d7        0x426fe668


[       2.724]       0x0000000b           0x0000003f          0x000007e6        0x426fe668


[       2.732]       0x0000000c           0x00000035          0x000007ed        0x426fe668


[       2.740]       0x0000000d           0x0000003c          0x000007eb        0x426fe668


[       2.748]       0x0000000e           0x00000032          0x000007f7        0x426fe668


[       2.756]       0x0000000f           0x00000034          0x000007ef        0x426fe668


[       2.764] [FORMAT_DBG] ===================================================


[       2.822] 


[       2.822] [FORMAT_DBG] ================== Die information ================


[       2.825] [FORMAT_DBG]    Die number:         0x0x00000000


[       2.830] [FORMAT_DBG]    Super block count:  0x0x00000800


[       2.836] [FORMAT_DBG]    Free block count:   0x0x00000000


[       2.842] [FORMAT_DBG]    Bad block count:    0x0x00000002


[       2.847] [FORMAT_DBG] ---------------------------------------------------


[       2.855] [FORMAT_DBG] ZoneNum:    0x0x00000000


[       2.859] [FORMAT_DBG]    Data block Count:    0x0x000003b6


[       2.865] [FORMAT_DBG]    Free block Count:    0x0x00000035


[       2.871] [FORMAT_DBG]    Log block table: 


[       2.875]        [Index]             [LogicalBlk]         [LogBlk]        [DataBlk]


[       2.883]       0x00000000           0x000003aa          0x0000071d        0x426fe668


[       2.891]       0x00000001           0x00000098          0x000006c7        0x426fe668


[       2.899]       0x00000002           0x00000008          0x00000714        0x426fe668


[       2.907]       0x00000003           0x0000000b          0x0000075a        0x426fe668


[       2.915]       0x00000004           0x00000011          0x0000009d        0x426fe668


[       2.924]       0x00000005           0x00000018          0x0000076f        0x426fe668


[       2.932]       0x00000006           0x0000000c          0x000006f0        0x426fe668


[       2.940]       0x00000007           0x000003ac          0x000007b7        0x426fe668


[       2.948]       0x00000008           0x00000050          0x000007bb        0x426fe668


[       2.956]       0x00000009           0x000003a9          0x000006c3        0x426fe668


[       2.964]       0x0000000a           0x00000099          0x000007e0        0x426fe668


[       2.972]       0x0000000b           0x00000012          0x000007df        0x426fe668


[       2.980]       0x0000000c           0x0000000e          0x000007e9        0x426fe668


[       2.988]       0x0000000d           0x00000010          0x000007ec        0x426fe668


[       2.996]       0x0000000e           0x0000000f          0x00000770        0x426fe668


[       3.004]       0x0000000f           0x00000013          0x000007f9        0x426fe668


[       3.012] [FORMAT_DBG] ---------------------------------------------------


[       3.019] [FORMAT_DBG] ZoneNum:    0x0x00000001


[       3.024] [FORMAT_DBG]    Data block Count:    0x0x000003b6


[       3.030] [FORMAT_DBG]    Free block Count:    0x0x00000034


[       3.036] [FORMAT_DBG]    Log block table: 


[       3.040]        [Index]             [LogicalBlk]         [LogBlk]        [DataBlk]


[       3.048]       0x00000000           0x00000040          0x0000072b        0x426fe668


[       3.056]       0x00000001           0x0000003e          0x00000748        0x426fe668


[       3.064]       0x00000002           0x0000003d          0x0000074d        0x426fe668


[       3.072]       0x00000003           0x0000003b          0x0000077f        0x426fe668


[       3.080]       0x00000004           0x0000003a          0x00000793        0x426fe668


[       3.088]       0x00000005           0x00000043          0x000007a3        0x426fe668


[       3.096]       0x00000006           0x00000039          0x000007ad        0x426fe668


[       3.104]       0x00000007           0x00000042          0x000007b5        0x426fe668


[       3.112]       0x00000008           0x00000038          0x000007c7        0x426fe668


[       3.120]       0x00000009           0x00000041          0x000007d4        0x426fe668


[       3.129]       0x0000000a           0x00000037          0x000007d7        0x426fe668


[       3.137]       0x0000000b           0x0000003f          0x000007e6        0x426fe668


[       3.145]       0x0000000c           0x00000035          0x000007ed        0x426fe668


[       3.153]       0x0000000d           0x0000003c          0x000007eb        0x426fe668


[       3.161]       0x0000000e           0x00000032          0x000007f7        0x426fe668


[       3.169]       0x0000000f           0x00000034          0x000007ef        0x426fe668


[       3.177] [FORMAT_DBG] ===================================================


[       3.184] NB1 : init ok


[       3.306] NHW : start nand scan


[       3.306] NFC Randomizer start. 


[       3.308] [SCAN_DBG] Nand flash chip id is:0x0x0000002c 0x0x00000068 0x0x00000004 0x0x426ff5f0 0x0x4081f008 0x0x0000004a


[       3.319] Nand Unique ID of chip 0 is : 


[       3.323] 0x000000ee, 0x00000092, 0x000000dd, 0x00000000


[       3.328] 0x00000061, 0x00000078, 0x000000c0, 0x00000000


[       3.334] 0x000000ff, 0x00000000, 0x000000ff, 0x00000000


[       3.339] 0x000000ff, 0x00000000, 0x000000ff, 0x00000000


[       3.345] 


[       3.347] 0x00000011, 0x0000006d, 0x00000022, 0x00000000


[       3.352] 0x0000009e, 0x00000087, 0x0000003f, 0x00000000


[       3.358] 0x00000000, 0x000000ff, 0x00000000, 0x00000000


[       3.363] 0x00000000, 0x000000ff, 0x00000000, 0x00000000


[       3.369] 


[       3.370] 





[       3.372] [SCAN_DBG] ==============Nand Architecture Parameter==============


[       3.379] [SCAN_DBG]    Nand Chip ID:         0x0x4a04682c 0x0xffffffff


[       3.386] [SCAN_DBG]    Nand Chip Count:      0x0x00000001


[       3.392] [SCAN_DBG]    Nand Chip Connect:    0x0x00000001


[       3.398] [SCAN_DBG]    Nand Rb Connect Mode:      0x0x00000001


[       3.404] [SCAN_DBG]    Sector Count Of Page: 0x0x00000008


[       3.410] [SCAN_DBG]    Page Count Of Block:  0x0x00000100


[       3.415] [SCAN_DBG]    Block Count Of Die:   0x0x00001000


[       3.421] [SCAN_DBG]    Plane Count Of Die:   0x0x00000002


[       3.427] [SCAN_DBG]    Die Count Of Chip:    0x0x00000001


[       3.432] [SCAN_DBG]    Bank Count Of Chip:   0x0x00000001


[       3.438] [SCAN_DBG]    Optional Operation:   0x0x00000208


[       3.444] [SCAN_DBG]    Access Frequence:     0x0x0000001e


[       3.450] [SCAN_DBG]    ECC Mode:             0x0x00000002


[       3.455] [SCAN_DBG]    Read Retry Type:      0x0x00000000


[       3.461] [SCAN_DBG]    DDR Type:             0x0x00000000


[       3.467] [SCAN_DBG] =======================================================





[       3.474] [SCAN_DBG] ==============Optional Operaion Parameter==============


[       3.482] [SCAN_DBG]    MultiPlaneReadCmd:      0x0x00000000, 0x0x00000030


[       3.489] [SCAN_DBG]    MultiPlaneWriteCmd:     0x0x00000011, 0x0x00000080


[       3.496] [SCAN_DBG]    MultiPlaneCopyReadCmd:  0x0x00000000, 0x0x00000000, 0x0x00000035


[       3.504] [SCAN_DBG]    MultiPlaneCopyWriteCmd: 0x0x00000085, 0x0x00000011, 0x0x00000080


[       3.512] [SCAN_DBG]    MultiPlaneStatusCmd:    0x0x00000070


[       3.518] [SCAN_DBG]    InterBnk0StatusCmd:     0x0x00000078


[       3.524] [SCAN_DBG]    InterBnk1StatusCmd:     0x0x00000078


[       3.530] [SCAN_DBG]    BadBlockFlagPosition:   0x0x00000001


[       3.536] [SCAN_DBG]    MultiPlaneBlockOffset:  0x0x00000001


[       3.542] [SCAN_DBG] =======================================================


[       3.549] NHW : nand hw scan ok


[       3.553] Ready to erase chip.


[       3.556] nfb phy init ok.


[       3.559] Succeed in getting flash info.


[       3.563] page size:0x00001000, block size: 0x00000100, bad block position: 0x00000001.


[       3.571] chip_cnt = 0x00000001, chip_connect = 0x00000001, rb_cnt = 0x00000001,  rb_connect = 0x426ff5f0,  good_block_ratio =0x4080db88 


[       3.584] erase chip 0 


[       3.895] find a all 0x00 block 90


[       3.896] find a all 0x00 block 91


[      16.265] has cleared the chip.


[      16.265] the nand is OK.


[      16.266] NHW : nand hw exit


[      16.269] boot ui progressbar: invalid progressbar pointer


[      16.274] boot ui progressbar: invalid progressbar pointer


[      16.280] part start = 34816


[      16.293] boot ui progressbar: invalid progressbar pointer


[      16.295] boot ui progressbar: invalid progressbar pointer


[      16.301] boot ui progressbar: invalid progressbar pointer


[      16.304] NB1 : enter NFB_Init


[      16.308] NB1 : enter phy init


[      16.311] NFC Randomizer start. 


[      16.315] [SCAN_DBG] Nand flash chip id is:0x0x0000002c 0x0x00000068 0x0x00000004 0x0x00000000 0x0x4081f008 0x0x0000004a


[      16.326] Nand Unique ID of chip 0 is : 


[      16.330] 0x000000ee, 0x00000092, 0x000000dd, 0x00000000


[      16.335] 0x00000061, 0x00000078, 0x000000c0, 0x00000000


[      16.341] 0x000000ff, 0x00000000, 0x000000ff, 0x00000000


[      16.346] 0x000000ff, 0x00000000, 0x000000ff, 0x00000000


[      16.352] 


[      16.354] 0x00000011, 0x0000006d, 0x00000022, 0x00000000


[      16.359] 0x0000009e, 0x00000087, 0x0000003f, 0x00000000


[      16.365] 0x00000000, 0x000000ff, 0x00000000, 0x00000000


[      16.370] 0x00000000, 0x000000ff, 0x00000000, 0x00000000


[      16.376] 


[      16.377] 





[      16.379] [SCAN_DBG] ==============Nand Architecture Parameter==============


[      16.386] [SCAN_DBG]    Nand Chip ID:         0x0x4a04682c 0x0xffffffff


[      16.393] [SCAN_DBG]    Nand Chip Count:      0x0x00000001


[      16.399] [SCAN_DBG]    Nand Chip Connect:    0x0x00000001


[      16.405] [SCAN_DBG]    Nand Rb Connect Mode:      0x0x00000001


[      16.411] [SCAN_DBG]    Sector Count Of Page: 0x0x00000008


[      16.417] [SCAN_DBG]    Page Count Of Block:  0x0x00000100


[      16.422] [SCAN_DBG]    Block Count Of Die:   0x0x00001000


[      16.428] [SCAN_DBG]    Plane Count Of Die:   0x0x00000002


[      16.434] [SCAN_DBG]    Die Count Of Chip:    0x0x00000001


[      16.439] [SCAN_DBG]    Bank Count Of Chip:   0x0x00000001


[      16.445] [SCAN_DBG]    Optional Operation:   0x0x00000208


[      16.451] [SCAN_DBG]    Access Frequence:     0x0x0000001e


[      16.457] [SCAN_DBG]    ECC Mode:             0x0x00000002


[      16.462] [SCAN_DBG]    Read Retry Type:      0x0x00000000


[      16.468] [SCAN_DBG]    DDR Type:             0x0x00000000


[      16.474] [SCAN_DBG] =======================================================





[      16.481] [SCAN_DBG] ==============Optional Operaion Parameter==============


[      16.489] [SCAN_DBG]    MultiPlaneReadCmd:      0x0x00000000, 0x0x00000030


[      16.496] [SCAN_DBG]    MultiPlaneWriteCmd:     0x0x00000011, 0x0x00000080


[      16.503] [SCAN_DBG]    MultiPlaneCopyReadCmd:  0x0x00000000, 0x0x00000000, 0x0x00000035


[      16.511] [SCAN_DBG]    MultiPlaneCopyWriteCmd: 0x0x00000085, 0x0x00000011, 0x0x00000080


[      16.519] [SCAN_DBG]    MultiPlaneStatusCmd:    0x0x00000070


[      16.525] [SCAN_DBG]    InterBnk0StatusCmd:     0x0x00000078


[      16.531] [SCAN_DBG]    InterBnk1StatusCmd:     0x0x00000078


[      16.537] [SCAN_DBG]    BadBlockFlagPosition:   0x0x00000001


[      16.543] [SCAN_DBG]    MultiPlaneBlockOffset:  0x0x00000001


[      16.549] [SCAN_DBG] =======================================================


[      16.556] NB1 : nand phy init ok


[      16.560] 


[      16.561] [FORMAT_DBG] ===========Logical Architecture Paramter===========


[      16.568] [FORMAT_DBG]    Logic Block Count of Zone:  0x0x000003b6


[      16.575] [FORMAT_DBG]    Page Count of Logic Block:  0x0x00000100


[      16.581] [FORMAT_DBG]    Sector Count of Logic Page: 0x0x00000010


[      16.588] [FORMAT_DBG]    Zone Count of Die:          0x0x00000002


[      16.594] [FORMAT_DBG] ===================================================


[      16.601] [FORMAT_DBG] Search the block mapping table on DIE 0x0x00000000


[      16.620] [FORMAT_DBG] Search block mapping table for die 0x0x00000000 failed!


[      16.622] PHY_PageReadSpare : too much ecc err,bank 0x00000000 block 0x00000000,page 0x00000001 


[      16.631] PHY_PageReadSpare : too much ecc err,bank 0x00000000 block 0x00000000,page 0x00000000 


[      16.668] [FORMAT_DBG] Find a bad block (NO. 0x0x0000002d) in the Die 0x0x00000000


[      17.953] [FORMAT_DBG] mark the last block as bad block 


[      17.955] 


[      17.955] [FORMAT_DBG] ================== Die information ================


[      17.962] [FORMAT_DBG]    Die number:         0x0x00000000


[      17.967] [FORMAT_DBG]    Super block count:  0x0x00000800


[      17.973] [FORMAT_DBG]    Free block count:   0x0x000007f7


[      17.979] [FORMAT_DBG]    Bad block count:    0x0x00000002


[      17.985] [FORMAT_DBG] ---------------------------------------------------


[      17.992] [FORMAT_DBG] ZoneNum:    0x0x00000000


[      17.996] [FORMAT_DBG]    Data block Count:    0x0x00000000


[      18.002] [FORMAT_DBG]    Free block Count:    0x0x00000000


[      18.008] [FORMAT_DBG]    Log block table: 


[      18.012]        [Index]             [LogicalBlk]         [LogBlk]        [DataBlk]


[      18.020]       0x00000000           0x0000ffff          0x0000ffff        0x426ff688


[      18.028]       0x00000001           0x0000ffff          0x0000ffff        0x426ff688


[      18.036]       0x00000002           0x0000ffff          0x0000ffff        0x426ff688


[      18.044]       0x00000003           0x0000ffff          0x0000ffff        0x426ff688


[      18.053]       0x00000004           0x0000ffff          0x0000ffff        0x426ff688


[      18.061]       0x00000005           0x0000ffff          0x0000ffff        0x426ff688


[      18.069]       0x00000006           0x0000ffff          0x0000ffff        0x426ff688


[      18.077]       0x00000007           0x0000ffff          0x0000ffff        0x426ff688


[      18.085]       0x00000008           0x0000ffff          0x0000ffff        0x426ff688


[      18.093]       0x00000009           0x0000ffff          0x0000ffff        0x426ff688


[      18.101]       0x0000000a           0x0000ffff          0x0000ffff        0x426ff688


[      18.109]       0x0000000b           0x0000ffff          0x0000ffff        0x426ff688


[      18.117]       0x0000000c           0x0000ffff          0x0000ffff        0x426ff688


[      18.125]       0x0000000d           0x0000ffff          0x0000ffff        0x426ff688


[      18.133]       0x0000000e           0x0000ffff          0x0000ffff        0x426ff688


[      18.141]       0x0000000f           0x0000ffff          0x0000ffff        0x426ff688


[      18.149] [FORMAT_DBG] ---------------------------------------------------


[      18.156] [FORMAT_DBG] ZoneNum:    0x0x00000001


[      18.161] [FORMAT_DBG]    Data block Count:    0x0x00000000


[      18.167] [FORMAT_DBG]    Free block Count:    0x0x00000000


[      18.173] [FORMAT_DBG]    Log block table: 


[      18.177]        [Index]             [LogicalBlk]         [LogBlk]        [DataBlk]


[      18.185]       0x00000000           0x0000ffff          0x0000ffff        0x426ff688


[      18.193]       0x00000001           0x0000ffff          0x0000ffff        0x426ff688


[      18.201]       0x00000002           0x0000ffff          0x0000ffff        0x426ff688


[      18.209]       0x00000003           0x0000ffff          0x0000ffff        0x426ff688


[      18.217]       0x00000004           0x0000ffff          0x0000ffff        0x426ff688


[      18.225]       0x00000005           0x0000ffff          0x0000ffff        0x426ff688


[      18.233]       0x00000006           0x0000ffff          0x0000ffff        0x426ff688


[      18.241]       0x00000007           0x0000ffff          0x0000ffff        0x426ff688


[      18.250]       0x00000008           0x0000ffff          0x0000ffff        0x426ff688


[      18.258]       0x00000009           0x0000ffff          0x0000ffff        0x426ff688


[      18.266]       0x0000000a           0x0000ffff          0x0000ffff        0x426ff688


[      18.274]       0x0000000b           0x0000ffff          0x0000ffff        0x426ff688


[      18.282]       0x0000000c           0x0000ffff          0x0000ffff        0x426ff688


[      18.290]       0x0000000d           0x0000ffff          0x0000ffff        0x426ff688


[      18.298]       0x0000000e           0x0000ffff          0x0000ffff        0x426ff688


[      18.306]       0x0000000f           0x0000ffff          0x0000ffff        0x426ff688


[      18.314] [FORMAT_DBG] ===================================================


[      18.327] 


[      18.327] [FORMAT_DBG] ================== Die information ================


[      18.330] [FORMAT_DBG]    Die number:         0x0x00000000


[      18.335] [FORMAT_DBG]    Super block count:  0x0x00000800


[      18.341] [FORMAT_DBG]    Free block count:   0x0x00000000


[      18.347] [FORMAT_DBG]    Bad block count:    0x0x00000002


[      18.353] [FORMAT_DBG] ---------------------------------------------------


[      18.360] [FORMAT_DBG] ZoneNum:    0x0x00000000


[      18.365] [FORMAT_DBG]    Data block Count:    0x0x000003b6


[      18.370] [FORMAT_DBG]    Free block Count:    0x0x00000045


[      18.376] [FORMAT_DBG]    Log block table: 


[      18.381]        [Index]             [LogicalBlk]         [LogBlk]        [DataBlk]


[      18.388]       0x00000000           0x0000ffff          0x0000ffff        0x426ff688


[      18.396]       0x00000001           0x0000ffff          0x0000ffff        0x426ff688


[      18.405]       0x00000002           0x0000ffff          0x0000ffff        0x426ff688


[      18.413]       0x00000003           0x0000ffff          0x0000ffff        0x426ff688


[      18.421]       0x00000004           0x0000ffff          0x0000ffff        0x426ff688


[      18.429]       0x00000005           0x0000ffff          0x0000ffff        0x426ff688


[      18.437]       0x00000006           0x0000ffff          0x0000ffff        0x426ff688


[      18.445]       0x00000007           0x0000ffff          0x0000ffff        0x426ff688


[      18.453]       0x00000008           0x0000ffff          0x0000ffff        0x426ff688


[      18.461]       0x00000009           0x0000ffff          0x0000ffff        0x426ff688


[      18.469]       0x0000000a           0x0000ffff          0x0000ffff        0x426ff688


[      18.477]       0x0000000b           0x0000ffff          0x0000ffff        0x426ff688


[      18.485]       0x0000000c           0x0000ffff          0x0000ffff        0x426ff688


[      18.493]       0x0000000d           0x0000ffff          0x0000ffff        0x426ff688


[      18.501]       0x0000000e           0x0000ffff          0x0000ffff        0x426ff688


[      18.509]       0x0000000f           0x0000ffff          0x0000ffff        0x426ff688


[      18.517] [FORMAT_DBG] ---------------------------------------------------


[      18.524] [FORMAT_DBG] ZoneNum:    0x0x00000001


[      18.529] [FORMAT_DBG]    Data block Count:    0x0x000003b6


[      18.535] [FORMAT_DBG]    Free block Count:    0x0x00000044


[      18.541] [FORMAT_DBG]    Log block table: 


[      18.545]        [Index]             [LogicalBlk]         [LogBlk]        [DataBlk]


[      18.553]       0x00000000           0x0000ffff          0x0000ffff        0x426ff688


[      18.561]       0x00000001           0x0000ffff          0x0000ffff        0x426ff688


[      18.569]       0x00000002           0x0000ffff          0x0000ffff        0x426ff688


[      18.577]       0x00000003           0x0000ffff          0x0000ffff        0x426ff688


[      18.585]       0x00000004           0x0000ffff          0x0000ffff        0x426ff688


[      18.593]       0x00000005           0x0000ffff          0x0000ffff        0x426ff688


[      18.602]       0x00000006           0x0000ffff          0x0000ffff        0x426ff688


[      18.610]       0x00000007           0x0000ffff          0x0000ffff        0x426ff688


[      18.618]       0x00000008           0x0000ffff          0x0000ffff        0x426ff688


[      18.626]       0x00000009           0x0000ffff          0x0000ffff        0x426ff688


[      18.634]       0x0000000a           0x0000ffff          0x0000ffff        0x426ff688


[      18.642]       0x0000000b           0x0000ffff          0x0000ffff        0x426ff688


[      18.650]       0x0000000c           0x0000ffff          0x0000ffff        0x426ff688


[      18.658]       0x0000000d           0x0000ffff          0x0000ffff        0x426ff688


[      18.666]       0x0000000e           0x0000ffff          0x0000ffff        0x426ff688


[      18.674]       0x0000000f           0x0000ffff          0x0000ffff        0x426ff688


[      18.682] [FORMAT_DBG] ===================================================


[      18.689] NB1 : init ok


[      18.692] download part count = 7


[      18.695] dl name = bootloader


[      18.699] item_original_size=6822912


[      18.814] sparse: bad magic


[      19.100] boot ui progressbar: invalid progressbar pointer


[      19.100] this ratio = 1


[      19.300] boot ui progressbar: invalid progressbar pointer


[      19.300] this ratio = 2


[      19.703] boot ui progressbar: invalid progressbar pointer


[      19.703] this ratio = 3


[      19.904] boot ui progressbar: invalid progressbar pointer


[      19.904] this ratio = 4


[      20.304] boot ui progressbar: invalid progressbar pointer


[      20.304] this ratio = 5


[      20.506] boot ui progressbar: invalid progressbar pointer


[      20.506] this ratio = 6


[      20.905] boot ui progressbar: invalid progressbar pointer


[      20.905] this ratio = 7


[      21.107] boot ui progressbar: invalid progressbar pointer


[      21.107] this ratio = 8


[      21.311] data deal finish


[      21.311] MSG:L405(card_sprite/card_sprite.c):sprite_ratio = 24


[      21.314] boot ui progressbar: invalid progressbar pointer


[      21.321] normal type verify


[      21.755] pc sum=0x894e9698, check sum=0x894e9698


[      21.755] dl name = env


[      21.757] item_original_size=131072


[      21.789] sparse: bad magic


[      21.789] data deal finish


[      21.789] env exit


[      21.828] MSG:L405(card_sprite/card_sprite.c):sprite_ratio = 33


[      21.829] boot ui progressbar: invalid progressbar pointer


[      21.835] dl name = boot


[      21.837] item_original_size=8650752


[      21.952] sparse: bad magic


[      22.241] boot ui progressbar: invalid progressbar pointer


[      22.241] this ratio = 1


[      22.643] boot ui progressbar: invalid progressbar pointer


[      22.643] this ratio = 2


[      23.044] boot ui progressbar: invalid progressbar pointer


[      23.044] this ratio = 3


[      23.447] boot ui progressbar: invalid progressbar pointer


[      23.447] this ratio = 4


[      23.848] boot ui progressbar: invalid progressbar pointer


[      23.848] this ratio = 5


[      24.051] boot ui progressbar: invalid progressbar pointer


[      24.051] this ratio = 6


[      24.454] boot ui progressbar: invalid progressbar pointer


[      24.454] this ratio = 7


[      24.855] boot ui progressbar: invalid progressbar pointer


[      24.855] this ratio = 8


[      25.156] data deal finish


[      25.156] MSG:L405(card_sprite/card_sprite.c):sprite_ratio = 42


[      25.159] boot ui progressbar: invalid progressbar pointer


[      25.166] normal type verify


[      25.718] pc sum=0x14a694bd, check sum=0x14a694bd


[      25.718] dl name = system


[      25.721] item_original_size=279835180


[      32.479] boot ui progressbar: invalid progressbar pointer


[      32.479] this ratio = 1


[      39.295] boot ui progressbar: invalid progressbar pointer


[      39.295] this ratio = 2


[      46.114] boot ui progressbar: invalid progressbar pointer


[      46.115] this ratio = 3


[      53.049] boot ui progressbar: invalid progressbar pointer


[      53.049] this ratio = 4


[      59.869] boot ui progressbar: invalid progressbar pointer


[      59.870] this ratio = 5


[      66.689] boot ui progressbar: invalid progressbar pointer


[      66.689] this ratio = 6


[      73.624] boot ui progressbar: invalid progressbar pointer


[      73.624] this ratio = 7


[      80.445] boot ui progressbar: invalid progressbar pointer


[      80.445] this ratio = 8


[      87.235] data deal finish


[     134.447] MSG:L405(card_sprite/card_sprite.c):sprite_ratio = 51


[     134.447] boot ui progressbar: invalid progressbar pointer


[     134.454] sparse type verify


[     136.615] pc sum=0xbfc4631f, check sum=0xbfc4631f


[     136.615] dl name = recovery


[     136.617] item_original_size=8988672


[     136.735] sparse: bad magic


[     137.027] boot ui progressbar: invalid progressbar pointer


[     137.027] this ratio = 1


[     137.428] boot ui progressbar: invalid progressbar pointer


[     137.428] this ratio = 2


[     137.830] boot ui progressbar: invalid progressbar pointer


[     137.830] this ratio = 3


[     138.232] boot ui progressbar: invalid progressbar pointer


[     138.232] this ratio = 4


[     138.632] boot ui progressbar: invalid progressbar pointer


[     138.632] this ratio = 5


[     139.029] boot ui progressbar: invalid progressbar pointer


[     139.030] this ratio = 6


[     139.436] boot ui progressbar: invalid progressbar pointer


[     139.436] this ratio = 7


[     139.840] boot ui progressbar: invalid progressbar pointer


[     139.840] this ratio = 8


[     140.071] data deal finish


[     140.071] MSG:L405(card_sprite/card_sprite.c):sprite_ratio = 60


[     140.075] boot ui progressbar: invalid progressbar pointer


[     140.081] normal type verify


[     140.652] pc sum=0x17135c9f, check sum=0x17135c9f


[     140.652] dl name = sysrecovery


[     140.655] img size = 305836032


[     140.658] part size = 536870912


[     140.661] read start=34816


[     140.664] write start=4630528


[     223.520] dl name = UDISK


[     223.520] item_original_size=8


[     223.520] boot ui progressbar: invalid progressbar pointer


[     223.526] MSG:L498(card_sprite/card_sprite.c):write mbr, size = 4096


[     223.533] sparse: bad magic


[     223.558] boot ui progressbar: invalid progressbar pointer


[     223.628] mac=00:CE:39:B6:F6:10


[     223.628] size = 21


[     223.630] burn boot1


[     223.630] NB1 : enter phy init


[     223.634] NFC Randomizer start. 


[     223.637] [SCAN_DBG] Nand flash chip id is:0x0x0000002c 0x0x00000068 0x0x00000004 0x0x00000000 0x0x4081f008 0x0x0000004a


[     223.648] Nand Unique ID of chip 0 is : 


[     223.652] 0x000000ee, 0x00000092, 0x000000dd, 0x00000000


[     223.658] 0x00000061, 0x00000078, 0x000000c0, 0x00000000


[     223.663] 0x000000ff, 0x00000000, 0x000000ff, 0x00000000


[     223.669] 0x000000ff, 0x00000000, 0x000000ff, 0x00000000


[     223.674] 


[     223.676] 0x00000011, 0x0000006d, 0x00000022, 0x00000000


[     223.682] 0x0000009e, 0x00000087, 0x0000003f, 0x00000000


[     223.687] 0x00000000, 0x000000ff, 0x00000000, 0x00000000


[     223.693] 0x00000000, 0x000000ff, 0x00000000, 0x00000000


[     223.698] 


[     223.700] 





[     223.702] [SCAN_DBG] ==============Nand Architecture Parameter==============


[     223.709] [SCAN_DBG]    Nand Chip ID:         0x0x4a04682c 0x0xffffffff


[     223.716] [SCAN_DBG]    Nand Chip Count:      0x0x00000001


[     223.721] [SCAN_DBG]    Nand Chip Connect:    0x0x00000001


[     223.727] [SCAN_DBG]    Nand Rb Connect Mode:      0x0x00000001


[     223.733] [SCAN_DBG]    Sector Count Of Page: 0x0x00000008


[     223.739] [SCAN_DBG]    Page Count Of Block:  0x0x00000100


[     223.745] [SCAN_DBG]    Block Count Of Die:   0x0x00001000


[     223.750] [SCAN_DBG]    Plane Count Of Die:   0x0x00000002


[     223.756] [SCAN_DBG]    Die Count Of Chip:    0x0x00000001


[     223.762] [SCAN_DBG]    Bank Count Of Chip:   0x0x00000001


[     223.768] [SCAN_DBG]    Optional Operation:   0x0x00000208


[     223.773] [SCAN_DBG]    Access Frequence:     0x0x0000001e


[     223.779] [SCAN_DBG]    ECC Mode:             0x0x00000002


[     223.785] [SCAN_DBG]    Read Retry Type:      0x0x00000000


[     223.791] [SCAN_DBG]    DDR Type:             0x0x00000000


[     223.796] [SCAN_DBG] =======================================================





[     223.804] [SCAN_DBG] ==============Optional Operaion Parameter==============


[     223.811] [SCAN_DBG]    MultiPlaneReadCmd:      0x0x00000000, 0x0x00000030


[     223.818] [SCAN_DBG]    MultiPlaneWriteCmd:     0x0x00000011, 0x0x00000080


[     223.825] [SCAN_DBG]    MultiPlaneCopyReadCmd:  0x0x00000000, 0x0x00000000, 0x0x00000035


[     223.834] [SCAN_DBG]    MultiPlaneCopyWriteCmd: 0x0x00000085, 0x0x00000011, 0x0x00000080


[     223.842] [SCAN_DBG]    MultiPlaneStatusCmd:    0x0x00000070


[     223.848] [SCAN_DBG]    InterBnk0StatusCmd:     0x0x00000078


[     223.854] [SCAN_DBG]    InterBnk1StatusCmd:     0x0x00000078


[     223.860] [SCAN_DBG]    BadBlockFlagPosition:   0x0x00000001


[     223.865] [SCAN_DBG]    MultiPlaneBlockOffset:  0x0x00000001


[     223.871] [SCAN_DBG] =======================================================


[     223.879] NB1 : nand phy init ok


[     223.886] MSG:L61(nand_boot_operation/nand_boot1_write.c):Succeed in erasing block 2.


[     223.951] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x00200000 on block 2.


[     224.017] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x00236000 on block 2.


[     224.086] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x0026c000 on block 2.


[     224.152] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x002a2000 on block 2.


[     224.158] MSG:L61(nand_boot_operation/nand_boot1_write.c):Succeed in erasing block 3.


[     224.226] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x00300000 on block 3.


[     224.292] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x00336000 on block 3.


[     224.361] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x0036c000 on block 3.


[     224.427] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x003a2000 on block 3.


[     224.435] MSG:L61(nand_boot_operation/nand_boot1_write.c):Succeed in erasing block 4.


[     224.501] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x00400000 on block 4.


[     224.568] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x00436000 on block 4.


[     224.637] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x0046c000 on block 4.


[     224.704] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x004a2000 on block 4.


[     224.711] MSG:L61(nand_boot_operation/nand_boot1_write.c):Succeed in erasing block 5.


[     224.778] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x00500000 on block 5.


[     224.844] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x00536000 on block 5.


[     224.914] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x0056c000 on block 5.


[     224.980] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x005a2000 on block 5.


[     224.988] MSG:L61(nand_boot_operation/nand_boot1_write.c):Succeed in erasing block 6.


[     225.054] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x00600000 on block 6.


[     225.121] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x00636000 on block 6.


[     225.190] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x0066c000 on block 6.


[     225.256] MSG:L68(nand_boot_operation/nand_boot1_write.c):finish in progmming address 0x006a2000 on block 6.


[     225.261] boot ui progressbar: invalid progressbar pointer


[     225.275] NB1 : enter NFB_Init


[     225.275] NB1 : enter phy init


[     225.276] NFC Randomizer start. 


[     225.279] [SCAN_DBG] Nand flash chip id is:0x0x0000002c 0x0x00000068 0x0x00000004 0x0x00000000 0x0x4081f008 0x0x0000004a


[     225.290] Nand Unique ID of chip 0 is : 


[     225.294] 0x000000ee, 0x00000092, 0x000000dd, 0x00000000


[     225.300] 0x00000061, 0x00000078, 0x000000c0, 0x00000000


[     225.306] 0x000000ff, 0x00000000, 0x000000ff, 0x00000000


[     225.311] 0x000000ff, 0x00000000, 0x000000ff, 0x00000000


[     225.317] 


[     225.318] 0x00000011, 0x0000006d, 0x00000022, 0x00000000


[     225.324] 0x0000009e, 0x00000087, 0x0000003f, 0x00000000


[     225.329] 0x00000000, 0x000000ff, 0x00000000, 0x00000000


[     225.335] 0x00000000, 0x000000ff, 0x00000000, 0x00000000


[     225.340] 


[     225.342] 





[     225.344] [SCAN_DBG] ==============Nand Architecture Parameter==============


[     225.351] [SCAN_DBG]    Nand Chip ID:         0x0x4a04682c 0x0xffffffff


[     225.358] [SCAN_DBG]    Nand Chip Count:      0x0x00000001


[     225.364] [SCAN_DBG]    Nand Chip Connect:    0x0x00000001


[     225.369] [SCAN_DBG]    Nand Rb Connect Mode:      0x0x00000001


[     225.376] [SCAN_DBG]    Sector Count Of Page: 0x0x00000008


[     225.381] [SCAN_DBG]    Page Count Of Block:  0x0x00000100


[     225.387] [SCAN_DBG]    Block Count Of Die:   0x0x00001000


[     225.393] [SCAN_DBG]    Plane Count Of Die:   0x0x00000002


[     225.398] [SCAN_DBG]    Die Count Of Chip:    0x0x00000001                               


[     225.404] [SCAN_DBG]    Bank Count Of Chip:   0x0x00000001                               


[     225.410] [SCAN_DBG]    Optional Operation:   0x0x00000208                               


[     225.416] [SCAN_DBG]    Access Frequence:     0x0x0000001e                               


[     225.421] [SCAN_DBG]    ECC Mode:             0x0x00000002                               


[     225.427] [SCAN_DBG]    Read Retry Type:      0x0x00000000


[     225.433] [SCAN_DBG]    DDR Type:             0x0x00000000


[     225.438] [SCAN_DBG] =======================================================





[     225.446] [SCAN_DBG] ==============Optional Operaion Parameter==============


[     225.453] [SCAN_DBG]    MultiPlaneReadCmd:      0x0x00000000, 0x0x00000030


[     225.460] [SCAN_DBG]    MultiPlaneWriteCmd:     0x0x00000011, 0x0x00000080


[     225.467] [SCAN_DBG]    MultiPlaneCopyReadCmd:  0x0x00000000, 0x0x00000000, 0x0x00000035


[     225.476] [SCAN_DBG]    MultiPlaneCopyWriteCmd: 0x0x00000085, 0x0x00000011, 0x0x00000080


[     225.484] [SCAN_DBG]    MultiPlaneStatusCmd:    0x0x00000070


[     225.490] [SCAN_DBG]    InterBnk0StatusCmd:     0x0x00000078


[     225.496] [SCAN_DBG]    InterBnk1StatusCmd:     0x0x00000078


[     225.502] [SCAN_DBG]    BadBlockFlagPosition:   0x0x00000001


[     225.508] [SCAN_DBG]    MultiPlaneBlockOffset:  0x0x00000001


[     225.514] [SCAN_DBG] =======================================================


[     225.521] NB1 : nand phy init ok


[     225.524] 


[     225.526] [FORMAT_DBG] ===========Logical Architecture Paramter===========


[     225.533] [FORMAT_DBG]    Logic Block Count of Zone:  0x0x000003b6


[     225.539] [FORMAT_DBG]    Page Count of Logic Block:  0x0x00000100


[     225.546] [FORMAT_DBG]    Sector Count of Logic Page: 0x0x00000010


[     225.552] [FORMAT_DBG]    Zone Count of Die:          0x0x00000002


[     225.559] [FORMAT_DBG] ===================================================


[     225.566] [FORMAT_DBG] Search the block mapping table on DIE 0x0x00000000


[     225.575] [FORMAT_DBG] Search block mapping table for zone 0x0x00000000 of die 0x0x00000000 successfully!


[     225.585] [FORMAT_DBG] Search block mapping table for zone 0x0x00000001 of die 0x0x00000000 successfully!


[     225.603] NB1 : init ok


[     226.207] boot ui progressbar: invalid progressbar pointer


[     226.207] boot ui progressbar: invalid progressbar pointer


[     226.218] CARD OK


[     226.218] get work mode


[     226.218] try to close

Using dd seems to be the most reliable way to create the Android 4.0 SD card.

Reply Quote

Newer Topic Older Topic

Print View RSS

Author:

Your Email:

Subject:

Help information

BBcode help

Spam prevention:

Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.

Enter code:

Message: