Welcome! Log In Create A New Profile

Advanced

mele sata + 3.5" hdd

Posted by crz 
Forum List Message List New Topic
crz
mele sata + 3.5" hdd
August 04, 2012 10:20PM
I've got a 3.5" hard disk handy so I wanted to try hooking it up to my Mele. I have to take apart the case for the connector to fit, but it fits.

However, the drive doesn't spin up when the Mele is powered on. It's a WD Caviar Green, which is supposed to be relatively low power (though probably nothing like your typical 2.5" disk, of course).

Anyone have any thoughts on whether this is supposed to work? I'm pretty sure this isn't what the Mele's designers had in mind, but I figure it's worth a shot since I don't have an external enclosure available.
Reply Quote
jondb
Re: mele sata + 3.5" hdd
August 05, 2012 08:19PM
The sata power connector in the mele doesn't have a 12V line which is needed for 3.5" disks.

You could use the power connector from an external hard drive.
Reply Quote
crz
Re: mele sata + 3.5" hdd
August 06, 2012 12:29AM
Figured as much. I'll find an enclosure or something instead. Thanks.
Reply Quote
Newer Topic Older Topic
Author:

Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: