AX206 - Problem with "pale" display

Hello

I have hacked my display AX206 with fw_disp_delightdigi_black.bin (tried with fw_devel_delightdigi_black.bin too)
but I have got problem with "pale" display

No.1 is oryginal, no.2 is hacked.
http://img215.imageshack.us/img215/1061/zdjcie1024p.jpg

How can I set contrast ?? Backlight seems to be ok, brightness too.

Setting of contrast is currently not supported by dpf-ax. Working on it.
If you upload a dump of the original fw, I will have a look...

superelchi

Here is dumped oryginal firmware: http://www1.zippyshare.com/v/79894014/file.html

Please try attached fw.

superelchi

Thank you a lot - it's looking properly now !!

If you could post procedure that fix that issue on wiki, if would be nice for rest ppl ;-)
I created my own firmware but display looks like in oryginal fw_disp_delightdigi_black ...

After applying firmware: fw_disp_delightdigi_black_NEW: http://img694.imageshack.us/img694/5456/zdjcie1029a.jpg
Digital photo frame was packed in package: http://img841.imageshack.us/img841/1264/zdjcie1026w.jpg

HERE IS SOME MORE INFO ABOUT MY DPF

1. After connecting thru USB CONNECT:

ID 1908:0102 GEMBIRD

dmesg
[ 607.260554] Initializing USB Mass Storage driver...
[ 607.260718] scsi6 : usb-storage 6-1:1.0
[ 607.260822] usbcore: registered new interface driver usb-storage
[ 607.260825] USB Mass Storage support registered.
[ 607.272070] usbcore: registered new interface driver uas
[ 608.266270] scsi 6:0:0:0: CD-ROM buildwin Photo Frame 1.01 PQ: 0 ANSI: 2
[ 608.274238] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 608.274506] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 608.274687] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 608.444088] usb 6-1: reset full-speed USB device number 6 using uhci_hcd

2. In bootloader mode:

ID 1908:3318 GEMBIRD

dmesg
[ 753.088074] usb 6-1: new full-speed USB device number 7 using uhci_hcd
[ 763.269711] generic-usb 0003:1908:3318.0005: timeout initializing reports
[ 763.270043] generic-usb 0003:1908:3318.0005: hiddev0,hidraw2: USB HID v2.01 Device [BUILDWIN BL206v1.0.0] on usb-0000:00:1d.0-1/input0

3. Hacking procedure:

Found AX206 DPF (bootloader)
Manufacturer: Winbond
Size : 1 MB
Erase full flash...
Flashing sector 0...
Flashing sector 1...
Flashing sector 2...
Flashing sector 3...
Executing applet..

- - - - - - - - - - - - - - - - - - - - - - - -

New version of delightdigi_black committed to svn.

Dpf-ax currently has a flaw - lcd contrast is not initialized by default. Most lcds will work without it - but some need it. The only solution atm is to find the contrast-init routine in the original dump and add a it to lcdinit.s. I'm currently working at a more generic approach that will work with (hopefully) all displays ootb and will allow user adjustable contrast. First step is the screen testpattern, so you can find the optimal contrast (already done). Next step is the implementation of the contrast setting code (work in progress).

superelchi



Edited 1 time(s). Last edit at 07/28/2012 05:16AM by superelchi.