The stock 2.6.31.8 kernel source of iomega ix2-ng, Ez-media backup manufacturer provided is here: Download HM3 : iomega Ez Media Backup IX2-ng : IX2-dl They modified mach-type list. ../arch/arm/tools/mach-types feroceon_orion ARCH_FEROCEON_ORION FEROCEON_ORION 526 feroceon_kw ARCH_FEROCEON_KW FEROCEON_KW 527 feroceon_mv78xx0 ARCH_FEROCEON_MV78XX0 FEROCEON_MV78XX0 528 .configby Berryshake - uBoot
I really appreciate your advice. I added some codes like below. usb_init=run usb_scan; setenv usb_root LABEL=rootfs An elegant solution to this problem!by Berryshake - Debian
Hi. I just followed Bodhi's instructions, but some problems occurred with his Debian rootfs. Uboot installed fine in my new Pogoplug Mobile(V4-A1-01), but the kernel cannot boot and then freeze. I tried to boot ext2 rootfs. The rootfs boots well in my Pogoplug E02 machine, of course. Later I tried the Archlinux rootfs image, but its kernel cannot boot, too. Neconsole bootlog: U-Boot 2by Berryshake - Debian
// Bodhi Thank you for the great advice. I really appreciate it. I'll try to modify U-boot's environment variables.by Berryshake - Debian
Yes I have sereial console. As a Uboot noob I have a question. Current;y, this device only boots with zImage kernel. Its original Uboot environment said 'kernelimage=zimage' , so I had changed Uboot parameter like as below, to boot from USB stick... bootcmd_usb=usb reset; run usb_scan; run make_usb_bootargs; ext2load usb $(usb_device) 0x40000 /boot/zimage; bootm 0x40000 It onlyby Berryshake - Debian
root@IOMEGA:~# cat /proc/cpuinfo Processor : Feroceon 88FR131 rev 1 (v5l) BogoMIPS : 1192.75 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Feroceon-KW Revision : 0000 Serial : 0000000000000000 I think the spec is wrong. This machine equipped with single-core processor. Maybe thby Berryshake - Debian
I was wondering about the other Kirkwood device I Have. It is Iomega’s Ez Media & Backup Center. I made several unsuccessful attemps to install newer kernel on it... Here is the console boot output: Connecting to COM4... Connected. __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | |by Berryshake - Debian