bodhi Wrote: ------------------------------------------------------- > > If I don't load the u-boot, then the NAS is > > constantly rebooting about every minute. The > fan > > is running slow. > > 1. This is the HW watchdog in action when you run > u-boot from NAND. Is it 2014 version or 2015.10? > > I've encoded a command to kill the watby gazsiazasz - uBoot
I tried with both. With the 2015.10 version it wasn't rebooting if I remember right. I get an ST-Link-V2-1 and compiled the latest OpenOCD. Do you have an OpenOCD config file for NSA-325? (I still have to buy some header pins for the JTAG interface to solder in) I also noticed in some forum threads on the internet the same symptoms with this NAS, maybe it is a design defect(?)by gazsiazasz - uBoot
If I don't load the u-boot, then the NAS is constantly rebooting about every minute. The fan is running slow. If I am uploading the u-boot the fan speed is changing but at the end it is just hanging here. There is also garbage character at the end of the last line (can't see here) but nothing happens after that. I have noticed that the power LED and the HDD2 LED are always on (The pby gazsiazasz - uBoot
I have a bricked NSA-325. I tried to uartboot it with kwboot without success: ubuntu@ubuntu:~/Desktop/kwboot-tool$ sudo ./kwboot -b uboot.2015.10-tld-1.nsa325.mtd0.kwb -t -B 115200 /dev/ttyUSB0 -p Sending boot message. Please reboot the target...| Sending boot image... 0 % [......................................................................] 1 % [..................................by gazsiazasz - uBoot