Bodhi, Yes tried it too. My initial impression was they are swapped. One configuration, after swapping, does not show anything at all on the terminal. The other one shows 00 at least. So do you think this is beyond repair!by electrosam - Rescue System
Fred, Yes, the xterm emulation was selected in Putty. Terminal Details - Terminal -type string = xterm Terminal speeds = 38400,38400by electrosam - Rescue System
Hi, Yes, I think I did install Pogo V4 boot image. I followed all steps at this link- http://blog.qnology.com/2014/07/hacking-pogoplug-v4-series-4-and-mobile.html The only thing I did differently was, during tar extract of the archlinux, it would tell me certain directories are already there so I did rm -r /opt /var etc. Yes, but speaking of uboot, I think I flashed V4 boot image withby electrosam - Rescue System
Yes, was a typo! Sorry, I used 115200 baudby electrosam - Rescue System
Thanks a lot for reply Bodhi. Here are putty settings I used- Baud = 125200 COM3 Data Bits 8 Stop Bits 1 Parity - None Flow Control - None Why is it sending just zero!by electrosam - Rescue System
I tried with Putty and Hterm. Both are good programs.by electrosam - Rescue System
Bad news :( I was able to open, connect serial. Connection seems right, GND, Rx, Tx and 3.3v/5v from serial cable not connected. Opened putty with 115200 baud and NO xon/xoff control. Shows me garbage on poweron. Then used hterm, and noticed it sends me one or two 00. (See attached) Any hope of recovery now ?by electrosam - Rescue System
Thanks. I was able to open it. Connecting to serial now.by electrosam - Rescue System
Thanks a lot for reply. I just got a serial cable and trying to open the pogoplug. I was able to take the base off, but the clear plastic isn't sliding out. Any tips ?by electrosam - Rescue System
Hi, First of all, this place is great. Learned so much today from this forum. I was trying to get samba on my pogoplug E02 pink. Followed Qui's blog, but then timestamp were not correct. Tried getting ntp installed didn't work. So decied to go with ArchLinux instead. Suddenly, out of nowhere, Iost ssh access. Tried de-register and register did not help. Again somewhere on Quiby electrosam - Rescue System