It works! Thanks again!by doomgiant - Rescue System
Hi, bodhi No, I haven't done it. I couldn't find the command about it. Can you help to describe how to do it? Many thanks!by doomgiant - Rescue System
hi, bodhi I found one strange thing , after flash Debian-3.16.0-kirkwood-tld-2 rootfs: http://forum.doozan.com/read.php?2,12096 on each boot to debian, mac address of the ethernet is different , is it a known behavior? Thanks.by doomgiant - Rescue System
Got it. Many thanks for your help!by doomgiant - Rescue System
bodhi, Many thanks for your detail explanation, it has been a great progress to make it work with Debian. Thanks again! And does it mean this boot issue can be fixed on 2014.07 U-Boot?by doomgiant - Rescue System
Sorry for the missing log. without the usb drive, it display as below and can't get the ip address U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB...by doomgiant - Rescue System
Many thanks. Please check below root@debian:~# fw_printenv ethact=egiga0 bootdelay=3 baudrate=115200 arcNumber=2097 mainlineLinux=yes console=ttyS0,115200 led_init=green blinking led_exit=green off led_error=orange blinking mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) mtdids=nand0=orion_nand partition=nand0,2 stdin=serial stdout=serial stderr=serialby doomgiant - Rescue System
Many thanks, Bodhi. It works now!!! That's great!!! Could you help to show how to update error kernal image in debian?Sorry i am not familar with it. Or is it possible to make original pogoplug system work again? Thanks!by doomgiant - Rescue System
update some info, previously i follow the steps in this page http://blog.qnology.com/2013/03/tutorial-pogoplug-e02-with-arch-linux.html?showComment=1439781864560#c734884235715806540, the person give the guide to install arch linux on pogoplug E02 -----------------------------------------------------------------------------------------------------------------------------------------------------by doomgiant - Rescue System
Hi, all my target is pogoplug E02. After i run http://jeff.doozan.com/debian/uboot/install_uboot_mtd0.sh, and select option n - to keep original Pogoplug software . then i try to format and label partition on my usb disk #format and label partition ./mke2fs -L ROOTFS -j /dev/sda1 but it prompt ### Segmentation fault ### then i reboot the target, found it can't get the neby doomgiant - Rescue System