WD My Cloud EX2 Ultra not booting after upgrade to Debian Trixie Hi all, I have upgrade my WD My Cloud EX2 Ultra to Debian Trixie. The upgrade went fine. I rebooted the box and then the blue LED kept blinking, the box did not boot. I connected the serial-USB dongle and found there is a problem with init, that causes a kernel panic. My first thought was to check that /bin/systemd existed. It did not so I made a symlink from /bin/systemd to /usr/lib/systemd/systemd. This did not help, I got the same kernel panic message. Anyone a suggestion what to do? [ 3.264117][ T1] Waiting 10 sec before mounting root device... [ 13.307556][ T1] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 13.316572][ T1] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.334677][ T1] EXT4-fs (sda1): mounted filesystem 5c96dcf2-3df7-4757-95a5-37b8e661876a ro with ordered data mode. Quota mode: none. [ 13.347103][ T1] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 13.358726][ T1] devtmpfs: mounted [ 13.364355][ T1] Freeing unused kernel image (initmem) memory: 1024K [ 13.371632][ T1] Checked W+X mappings: passed, no W+X pages found [ 13.378090][ T1] Run /bin/systemd as init process [ 13.389039][ T1] Kernel panic - not syncing: Requested init /bin/systemd failed (error -2). [ 13.397709][ T1] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.5.7-mvebu-tld-1 #1 [ 13.405325][ T1] Hardware name: Marvell Armada 380/385 (Device Tree) [ 13.411978][ T1] unwind_backtrace from show_stack+0x10/0x14 [ 13.417949][ T1] show_stack from dump_stack_lvl+0x40/0x4c [ 13.423735][ T1] dump_stack_lvl from panic+0x104/0x308 [ 13.429258][ T1] panic from kernel_init+0xa0/0x130 [ 13.434430][ T1] kernel_init from ret_from_fork+0x14/0x28 [ 13.440214][ T1] Exception stack(0xf0831fb0 to 0xf0831ff8) [ 13.445994][ T1] 1fa0: 00000000 00000000 00000000 00000000 [ 13.454916][ T1] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 13.463839][ T1] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 13.471193][ C0] CPU0: stopping [ 13.471198][ C0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.5.7-mvebu-tld-1 #1 [ 13.471206][ C0] Hardware name: Marvell Armada 380/385 (Device Tree) [ 13.471210][ C0] unwind_backtrace from show_stack+0x10/0x14 [ 13.471225][ C0] show_stack from dump_stack_lvl+0x40/0x4c [ 13.471235][ C0] dump_stack_lvl from do_handle_IPI+0x84/0x11c [ 13.471245][ C0] do_handle_IPI from ipi_handler+0x14/0x20 [ 13.471256][ C0] ipi_handler from handle_percpu_devid_irq+0x4c/0xe8 [ 13.471271][ C0] handle_percpu_devid_irq from handle_irq_desc+0x1c/0x2c [ 13.471288][ C0] handle_irq_desc from gic_handle_irq+0x58/0x64 [ 13.471302][ C0] gic_handle_irq from generic_handle_arch_irq+0x28/0x3c [ 13.471310][ C0] generic_handle_arch_irq from __irq_svc+0x88/0xc8 [ 13.471319][ C0] Exception stack(0xc1001f20 to 0xc1001f68) [ 13.471327][ C0] 1f20: 00000000 c0ddbca8 00001ad4 00000001 00000000 00000000 00000000 c100e140 [ 13.471334][ C0] 1f40: c100a010 c100a070 c0f42104 0000011f 00000001 c1001f70 c0a73cb0 c0a73cb4 [ 13.471338][ C0] 1f60: 20000113 ffffffff [ 13.471342][ C0] __irq_svc from default_idle_call+0x28/0x2c [ 13.471351][ C0] default_idle_call from do_idle+0x108/0x280 [ 13.471363][ C0] do_idle from cpu_startup_entry+0x28/0x2c [ 13.471371][ C0] cpu_startup_entry from rest_init+0xb8/0xd4 [ 13.471381][ C0] rest_init from arch_post_acpi_subsys_init+0x0/0x8 [ 13.603889][ T1] ---[ end Kernel panic - not syncing: Requested init /bin/systemd failed (error -2). ]--- https://forum.doozan.com/read.php?2,140332,140332#msg-140332 Sun, 15 Mar 2026 16:47:05 -0500 Phorum 5.2.23 https://forum.doozan.com/read.php?2,140332,140339#msg-140339 Re: WD My Cloud EX2 Ultra not booting after upgrade to Debian Trixie https://forum.doozan.com/read.php?2,140332,140339#msg-140339
Quote

** Edit: Never mind the rest of this post. I fixed the boot issue by making a symlink from /bin/systemd to /sbin/init.**

Nice! It's strange that the symlink is missing, but we'll take the victory.]]> bodhi Debian Fri, 10 Oct 2025 14:05:51 -0500 https://forum.doozan.com/read.php?2,140332,140336#msg-140336 Re: WD My Cloud EX2 Ultra not booting after upgrade to Debian Trixie https://forum.doozan.com/read.php?2,140332,140336#msg-140336
Thanks for your reply Bodhi. Below is the complete bootlog.

Considering sysvinit, I need to find out how to do that. I am having difficulties interrupting the bootsequence as my keyboard presses are not sent to the device via the serial debug link. I think it has to do with the issue that for the WD My Cloud the 3v3 also needs to be connected to have a reliable transmit line of the UART. It used to work some years ago, now it does not anymore. Anyway, first some soldering and then I will come back to share any progress. 

BootROM - 1.73
Booting from NAND flash

General initialization - Version: 1.0.0
Detected Device ID 6820
High speed PHY - Version: 2.0

Load WD GrandTeton Serdes Config:
board SerDes lanes topology details:
 | Lane #  | Speed |  Type       |
 --------------------------------
 |   0    |  06   |  SATA0      |
 |   1    |  05   |  PCIe0      |
 |   2    |  06   |  SATA1      |
 |   3    |  05   |  USB3 HOST1 |
 |   4    |  05   |  USB3 HOST0 |
 |   5    |  00   |  SGMII2     |
 --------------------------------
PCIe, Idx 0: detected no link
High speed PHY - Ended Successfully
DDR3 Training Sequence - Ver TIP-1.26.0
mvSysEnvGetTopologyUpdateInfo: TWSI Read failed
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED

 __   __                      _ _
|  \/  | __ _ _ ____   _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| |  | | (_| | |   \ V /  __/ | |
|_|  |_|\__,_|_|    \_/ \___|_|_|
         _   _     ____              _
        | | | |   | __ )  ___   ___ | |_
        | | | |___|  _ \ / _ \ / _ \| __|
        | |_| |___| |_) | (_) | (_) | |_
         \___/    |____/ \___/ \___/ \__|
 ** LOADER **


U-Boot 2013.01_v1.04 (Jun 29 2022 - 21:23:57) Marvell version: 2014_T3.0p6

mvBoardIdIndexGet(boardId) = 1
Board: GrandTeton DB6820
SoC:   MV88F6820 Rev A0
       running 2 CPUs
CPU:   ARM Cortex A9 MPCore (Rev 1) LE
       CPU 0
       CPU    @ 1332 [MHz]
       L2     @ 666 [MHz]
       TClock @ 200 [MHz]
       DDR    @ 666 [MHz]
       DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled
DRAM:  1 GiB

Map:   Code:                    0x3fece000:0x3ff96320
       BSS:                     0x3ffef65c
       Stack:                   0x3f9cdf20
       Heap:                    0x3f9ce000:0x3fece000
raise: Signal # 8 caught
raise: Signal # 8 caught
       U-Boot Environment:      0x00000000:0x00080000 (NAND)

NAND:  ID: daad ,256 MiB
MMC:   mv_sdh: 0
PCI-e 0: Detected No Link.
USB2.0 0: Host Mode
USB3.0 0: Host Mode
USB3.0 1: Host Mode
Board configuration detected:
Creating 1 MTD partitions on "nand0":
0x00000f500000-0x00000ff00000 : "mtd=7"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=7"
UBI: MTD device size:            10 MiB
UBI: number of good PEBs:        80
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             32
UBI: total number of reserved PEBs: 48
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 4/1
UBIFS: mounted UBI device 0, volume 0, name "reserve2"
UBIFS: mounted read-only
UBIFS: file system size:   4063232 bytes (3968 KiB, 3 MiB, 32 LEBs)
UBIFS: journal size:       1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root:  200807 bytes (196 KiB)
Loading file '/mac_addr' to addr 0x02000000 with size 18 (0x00000012)...
Done
Set lan 2 WakeOnLan ok
Enable HD1
Enable HD2
Net:
|  port  | Interface | PHY address  |
|--------|-----------|--------------|
| egiga0 |   RGMII   |   In-Band    |
| egiga1 |   RGMII   |   In-Band    |
| egiga2 |   SGMII   |     0x00     |
egiga0, egiga1, egiga2 [PRIME]
Hit any key to stop autoboot:  0

Reset SCSI
AHCI init for unit0
Target spinup took 0 ms.
Target spinup took 0 ms.

Error: SCSI Controller(s) 1B4B:9215 1B4B:9235 not found
scanning bus for devices...
  Device 0: (0:0) Vendor: ATA Prod.: Crucial_CT525MX3 Rev: M0C
            Type: Hard Disk
            Capacity: 500786.5 MB = 489.0 GB (1025610768 x 512)
  Device 1: (1:0) Vendor: ATA Prod.: Samsung SSD 870 Rev: SVQ0
            Type: Hard Disk
            Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512)
Found 2 device(s).
5165068 bytes read in 152 ms (32.4 MiB/s)
10169301 bytes read in 222 ms (43.7 MiB/s)
## Booting image at 00500000 ...
## Booting kernel from Legacy Image at 00500000 ...
   Image Name:   Linux-6.5.7-mvebu-tld-1
   Created:      2023-10-27   8:26:36 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    5165004 Bytes = 4.9 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 00a00000 ...
   Image Name:   initramfs-6.5.7-mvebu-tld-1
   Created:      2023-10-27   8:27:02 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    10169237 Bytes = 9.7 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000][    T0] Booting Linux on physical CPU 0x0
[    0.000000][    T0] Linux version 6.5.7-mvebu-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Wed Oct 18 19:13:54 PDT 2023
[    0.000000][    T0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000][    T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000][    T0] OF: fdt: Machine model: WD MyCloud Ex2 Ultra
[    0.000000][    T0] printk: bootconsole [earlycon0] enabled
[    0.000000][    T0] Memory policy: Data cache writealloc
[    0.000000][    T0] INITRD: 0x00a00000+0x009b3000 overlaps in-use memory region
[    0.000000][    T0]  - disabling initrd
[    0.000000][    T0] Zone ranges:
[    0.000000][    T0]   Normal   [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000][    T0]   HighMem  [mem 0x0000000030000000-0x000000003fffffff]
[    0.000000][    T0] Movable zone start for each node
[    0.000000][    T0] Early memory node ranges
[    0.000000][    T0]   node   0: [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000][    T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000][    T0] percpu: Embedded 14 pages/cpu s25364 r8192 d23788 u57344
[    0.000000][    T0] Kernel command line: root=/dev/sda1 console=ttyS0,115200 rootdelay=10 usbcore.autosuspend=-1 mtdparts=armada-nand:5m(u-boot)ro,5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2) earlyprintk=serial raid=noautodetect init=/bin/systemd
[    0.000000][    T0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000][    T0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 260416
[    0.000000][    T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000][    T0] Memory: 1019604K/1048576K available (10240K kernel code, 870K rwdata, 3460K rodata, 1024K init, 464K bss, 28972K reserved, 0K cma-reserved, 262144K highmem)
[    0.000000][    T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000][    T0] rcu: Preemptible hierarchical RCU implementation.
[    0.000000][    T0] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000][    T0]  Trampoline variant of Tasks RCU enabled.
[    0.000000][    T0]  Tracing variant of Tasks RCU enabled.
[    0.000000][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000][    T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000][    T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000][    T0] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000
[    0.000000][    T0] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000][    T0] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000][    T0] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000][    T0] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000][    T0] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000][    T0] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000000][    T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000001][    T0] sched_clock: 64 bits at 666MHz, resolution 1ns, wraps every 4398046511103ns
[    0.008682][    T0] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x999999d70a, max_idle_ns: 440795225152 ns
[    0.020389][    T0] Switching to timer-based delay loop, resolution 1ns
[    0.027201][    T0] Ignoring duplicate/late registration of read_current_timer delay
[    0.034917][    T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.046788][    T0] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.056370][    T0] Console: colour dummy device 80x30
[    0.061525][    T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 1332.00 BogoMIPS (lpj=6660000)
[    0.072802][    T0] CPU: Testing write buffer coherency: ok
[    0.078389][    T0] CPU0: Spectre v2: using BPIALL workaround
[    0.084114][    T0] pid_max: default: 32768 minimum: 301
[    0.092626][    T0] LSM: initializing lsm=capability,integrity
[    0.099326][    T0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.107313][    T0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.119687][    T1] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.126758][    T1] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.134586][    T1] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.142939][    T1] Setting up static identity map for 0x100000 - 0x100060
[    0.149920][    T1] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[    0.155850][    T1] mvebu-pmsu: Initializing Power Management Service Unit
[    0.162843][    T1] rcu: Hierarchical SRCU implementation.
[    0.168328][    T1] rcu:     Max phase no-delay instances is 1000.
[    0.174893][    T1] smp: Bringing up secondary CPUs ...
[    0.180518][    T1] Booting CPU 1
[    0.183986][    T0] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.183997][    T0] CPU1: Spectre v2: using BPIALL workaround
[    0.196151][    T1] smp: Brought up 1 node, 2 CPUs
[    0.200938][    T1] SMP: Total of 2 processors activated (2664.00 BogoMIPS).
[    0.207979][    T1] CPU: All CPU(s) started in SVC mode.
[    0.214138][    T1] devtmpfs: initialized
[    0.222421][    T1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.231079][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.241598][    T1] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.251161][    T1] prandom: seed boundary self test passed
[    0.258317][    T1] prandom: 100 self tests passed
[    0.263091][    T1] pinctrl core: initialized pinctrl subsystem
[    0.270388][    T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.277776][    T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.287605][    T1] audit: initializing netlink subsys (disabled)
[    0.293851][   T26] audit: type=2000 audit(0.250:1): state=initialized audit_enabled=0 res=1
[    0.294270][    T1] thermal_sys: Registered thermal governor 'step_wise'
[    0.302338][    T1] cpuidle: using governor ladder
[    0.313811][    T1] cpuidle: using governor menu
[    0.318622][    T1] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.327301][    T1] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.333960][    T1] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    0.342741][    T1] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    0.352858][    T1] platform soc: Fixed dependency cycle(s) with /soc/internal-regs/interrupt-controller@d000
[    0.537105][    T1] raid6: int32x8  gen()   265 MB/s
[    0.707110][    T1] raid6: int32x4  gen()   277 MB/s
[    0.877078][    T1] raid6: int32x2  gen()   459 MB/s
[    1.047053][    T1] raid6: int32x1  gen()   497 MB/s
[    1.051999][    T1] raid6: using algorithm int32x1 gen() 497 MB/s
[    1.227072][    T1] raid6: .... xor() 181 MB/s, rmw enabled
[    1.232626][    T1] raid6: using intx1 recovery algorithm
[    1.239206][    T1] SCSI subsystem initialized
[    1.243937][    T1] usbcore: registered new interface driver usbfs
[    1.250151][    T1] usbcore: registered new interface driver hub
[    1.256163][    T1] usbcore: registered new device driver usb
[    1.262167][    T1] pps_core: LinuxPPS API ver. 1 registered
[    1.267818][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.277627][    T1] PTP clock support registered
[    1.283638][    T1] vgaarb: loaded
[    1.287479][    T1] clocksource: Switched to clocksource arm_global_timer
[    1.297704][    T1] VFS: Disk quotas dquot_6.6.0
[    1.302473][    T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.317902][    T1] NET: Registered PF_INET protocol family
[    1.323632][    T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.333071][    T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.342222][    T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.350661][    T1] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.359154][    T1] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    1.367177][    T1] TCP: Hash tables configured (established 8192 bind 8192)
[    1.374535][    T1] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    1.382791][    T1] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.390109][    T1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.398168][    T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.404960][    T1] RPC: Registered named UNIX socket transport module.
[    1.411598][    T1] RPC: Registered udp transport module.
[    1.416977][    T1] RPC: Registered tcp transport module.
[    1.422365][    T1] RPC: Registered tcp-with-tls transport module.
[    1.428531][    T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.435648][    T1] PCI: CLS 0 bytes, default 64
[    1.440754][    T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    1.451667][    T1] Initialise system trusted keyrings
[    1.456848][    T1] Key type blacklist registered
[    1.461674][    T1] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    1.468900][    T1] zbud: loaded
[    1.478326][    T1] NFS: Registering the id_resolver key type
[    1.484072][    T1] Key type id_resolver registered
[    1.488954][    T1] Key type id_legacy registered
[    1.493751][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.501138][    T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.593744][    T1] xor: measuring software checksum speed
[    1.603753][    T1]    arm4regs        :  2172 MB/sec
[    1.614691][    T1]    8regs           :  1669 MB/sec
[    1.625405][    T1]    32regs          :  1733 MB/sec
[    1.630444][    T1] xor: using function: arm4regs (2172 MB/sec)
[    1.636347][    T1] async_tx: api initialized (async)
[    1.641389][    T1] Key type asymmetric registered
[    1.646162][    T1] Asymmetric key parser 'x509' registered
[    1.651984][    T1] bounce: pool size: 64 pages
[    1.656777][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.665170][    T1] io scheduler bfq registered
[    1.672506][    T1] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    1.681844][    T1] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.691851][    T1] debugfs: Directory 'f1018100.gpio' with parent 'regmap' already present!
[    1.700936][    T1] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.710869][    T1] debugfs: Directory 'f1018140.gpio' with parent 'regmap' already present!
[    1.721080][    T1] mv_xor f1060800.xor: Marvell shared XOR driver
[    1.798568][    T1] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    1.809200][    T1] mv_xor f1060900.xor: Marvell shared XOR driver
[    1.888540][    T1] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    1.978329][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.989229][    T1] printk: console [ttyS0] disabled
[    2.014985][    T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 39, base_baud = 12500000) is a 16550A
[    2.024698][    T1] printk: console [ttyS0] enabled
[    2.024698][    T1] printk: console [ttyS0] enabled
[    2.034526][    T1] printk: bootconsole [earlycon0] disabled
[    2.034526][    T1] printk: bootconsole [earlycon0] disabled
[    2.099424][    T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 40, base_baud = 12500000) is a 16550A
[    2.111160][    T1] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy regulator
[    2.119697][    T1] ahci-mvebu f10a8000.sata: supply phy not found, using dummy regulator
[    2.128006][    T1] ahci-mvebu f10a8000.sata: supply target not found, using dummy regulator
[    2.136644][    T1] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    2.146471][    T1] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    2.157467][    T1] scsi host0: ahci-mvebu
[    2.162500][    T1] scsi host1: ahci-mvebu
[    2.166961][    T1] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[    2.175667][    T1] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[    2.185637][    T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
[    2.192774][    T1] nand: Hynix H27U2G8F2CTR-BC
[    2.197332][    T1] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    2.205932][    T1] Bad block table found at page 131008, version 0x01
[    2.212852][    T1] Bad block table found at page 130944, version 0x01
[    2.219718][    T1] 8 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[    2.227427][    T1] Creating 8 MTD partitions on "pxa3xx_nand-0":
[    2.233592][    T1] 0x000000000000-0x000000500000 : "U-Boot"
[    2.240440][    T1] 0x000000500000-0x000000a00000 : "uImage"
[    2.247093][    T1] 0x000000a00000-0x000000f00000 : "uRamdisk"
[    2.253966][    T1] 0x000000f00000-0x00000c800000 : "image.cfs"
[    2.261311][    T1] 0x00000c800000-0x00000d700000 : "rescue fw"
[    2.268330][    T1] 0x00000d700000-0x00000eb00000 : "config"
[    2.275066][    T1] 0x00000eb00000-0x00000f500000 : "reserve1"
[    2.281946][    T1] 0x00000f500000-0x00000ff00000 : "reserve2"
[    2.289515][    T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    2.298134][    T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    2.313944][    T1] hwmon hwmon0: temp1_input not attached to any thermal zone
[    2.323006][    T1] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[    2.335277][    T1] mvneta f1034000.ethernet eth0: Using random mac address 46:1d:0f:f9:8e:1d
[    2.344304][    T1] usbcore: registered new interface driver smsc75xx
[    2.351377][    T1] orion-ehci f1058000.usb: EHCI Host Controller
[    2.357569][    T1] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    2.365981][    T1] orion-ehci f1058000.usb: irq 44, io mem 0xf1058000
[    2.397504][    T1] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    2.404344][    T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    2.413386][    T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.421373][    T1] usb usb1: Product: EHCI Host Controller
[    2.426991][    T1] usb usb1: Manufacturer: Linux 6.5.7-mvebu-tld-1 ehci_hcd
[    2.434100][    T1] usb usb1: SerialNumber: f1058000.usb
[    2.440015][    T1] hub 1-0:1.0: USB hub found
[    2.444528][    T1] hub 1-0:1.0: 1 port detected
[    2.450420][    T1] usbcore: registered new interface driver usblp
[    2.456712][    T1] usbcore: registered new interface driver usb-storage
[    2.463797][    T1] mousedev: PS/2 mouse device common for all mice
[    2.471304][    T1] armada38x-rtc f10a3800.rtc: registered as rtc0
[    2.477701][    T1] armada38x-rtc f10a3800.rtc: setting system clock to 2025-10-10T14:08:49 UTC (1760105329)
[    2.488004][    T1] i2c_dev: i2c /dev entries driver
[    2.493237][    T1] mv64xxx_i2c f1011000.i2c: can't get pinctrl, bus recovery not supported
[    2.502131][    T1] mv64xxx_i2c f1011100.i2c: can't get pinctrl, bus recovery not supported
[    2.513561][    T1] orion_wdt: Initial timeout 171 sec
[    2.519407][    T1] device-mapper: uevent: version 1.0.3
[    2.525002][    T1] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    2.534477][    T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[    2.541765][    T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[    2.549159][    T1] device-mapper: multipath service-time: version 0.3.0 loaded
[    2.556570][    T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[    2.563534][    T1] sdhci: Secure Digital Host Controller Interface driver
[    2.570461][    T1] sdhci: Copyright(c) Pierre Ossman
[    2.575657][    T1] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.584295][    T1] marvell-cesa f1090000.crypto: CESA device successfully registered
[    2.592408][    T1] hid: raw HID events driver (C) Jiri Kosina
[    2.598589][    T1] usbcore: registered new interface driver usbhid
[    2.604898][    T1] usbhid: USB HID core driver
[    2.610628][    T1] NET: Registered PF_INET6 protocol family
[    2.617436][    T1] Segment Routing with IPv6
[    2.621850][    T1] RPL Segment Routing with IPv6
[    2.626618][    T1] In-situ OAM (IOAM) with IPv6
[    2.631347][    T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.639105][    T1] NET: Registered PF_PACKET protocol family
[    2.645072][    T1] 8021q: 802.1Q VLAN Support v1.8
[    2.650059][    T1] Key type dns_resolver registered
[    2.655279][    T1] ThumbEE CPU extension supported.
[    2.660326][    T1] Registering SWP/SWPB emulation handler
[    2.677564][  T683] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.684532][  T688] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.702198][  T683] ata1.00: supports DRM functions and may not be fully accessible
[    2.705278][    T1] registered taskstats version 1
[    2.712563][  T683] ata1.00: ATA-10: Crucial_CT525MX300SSD1,  M0CR040, max UDMA/133
[    2.714950][    T1] Loading compiled-in X.509 certificates
[    2.722558][  T683] ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32)
[    2.728136][  T688] ata2.00: supports DRM functions and may not be fully accessible
[    2.728142][  T688] ata2.00: ATA-11: Samsung SSD 870 QVO 2TB, SVQ02B6Q, max UDMA/133
[    2.751472][    T1] Key type .fscrypt registered
[    2.751891][  T688] ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32)
[    2.756124][    T1] Key type fscrypt-provisioning registered
[    2.769321][    T1] Key type big_key registered
[    2.774591][    T1] Key type encrypted registered
[    2.779861][  T683] ata1.00: Features: Trust Dev-Sleep
[    2.785274][  T683] ata1.00: supports DRM functions and may not be fully accessible
[    2.794401][   T12] usb_phy_generic usb3_0_phy: dummy supplies not allowed for exclusive requests
[    2.794532][  T688] ata2.00: Features: Trust Dev-Sleep
[    2.804534][   T12] usb_phy_generic usb3_1_phy: dummy supplies not allowed for exclusive requests
[    2.809077][  T688] ata2.00: supports DRM functions and may not be fully accessible
[    2.817838][   T12] xhci-hcd f10f0000.usb3: xHCI Host Controller
[    2.827087][  T683] ata1.00: configured for UDMA/133
[    2.831285][   T12] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[    2.837162][  T688] ata2.00: configured for UDMA/133
[    2.844652][   T12] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000000010
[    2.849852][   T10] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT525MX3 R040 PQ: 0 ANSI: 5
[    2.859615][   T12] xhci-hcd f10f0000.usb3: irq 45, io mem 0xf10f0000
[    2.869588][   T10] ata1.00: Enabling discard_zeroes_data
[    2.880615][   T36] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 870  2B6Q PQ: 0 ANSI: 5
[    2.881268][   T10] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
[    2.890544][   T12] xhci-hcd f10f0000.usb3: xHCI Host Controller
[    2.898176][  T698] ata2.00: Enabling discard_zeroes_data
[    2.904224][   T12] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
[    2.909932][  T698] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.917593][   T12] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed
[    2.926073][   T10] sd 0:0:0:0: [sda] Write Protect is off
[    2.933237][   T12] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    2.938690][  T698] sd 1:0:0:0: [sdb] Write Protect is off
[    2.947662][   T12] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.947669][   T12] usb usb2: Product: xHCI Host Controller
[    2.947674][   T12] usb usb2: Manufacturer: Linux 6.5.7-mvebu-tld-1 xhci-hcd
[    2.961149][   T12] usb usb2: SerialNumber: f10f0000.usb3
[    2.967921][   T12] hub 2-0:1.0: USB hub found
[    2.979584][   T12] hub 2-0:1.0: 1 port detected
[    2.984079][  T698] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.988934][   T12] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.998511][   T10] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.007350][   T12] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    3.017008][  T698] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[    3.025906][   T12] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.025913][   T12] usb usb3: Product: xHCI Host Controller
[    3.032958][   T10] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.040843][   T12] usb usb3: Manufacturer: Linux 6.5.7-mvebu-tld-1 xhci-hcd
[    3.053910][  T698] ata2.00: Enabling discard_zeroes_data
[    3.060496][   T12] usb usb3: SerialNumber: f10f0000.usb3
[    3.066349][   T10] ata1.00: Enabling discard_zeroes_data
[    3.077143][   T12] hub 3-0:1.0: USB hub found
[    3.077775][   T10]  sda: sda1 sda2 sda3
[    3.081892][   T12] hub 3-0:1.0: 1 port detected
[    3.085613][  T698]  sdb: sdb1
[    3.091105][   T12] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    3.093970][   T10] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    3.100303][   T12] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
[    3.106044][  T698] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    3.114065][   T12] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000000010
[    3.130148][   T12] xhci-hcd f10f8000.usb3: irq 46, io mem 0xf10f8000
[    3.136784][   T12] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    3.142902][   T12] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
[    3.151161][   T12] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[    3.158394][   T12] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    3.167409][   T12] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.175386][   T12] usb usb4: Product: xHCI Host Controller
[    3.181000][   T12] usb usb4: Manufacturer: Linux 6.5.7-mvebu-tld-1 xhci-hcd
[    3.188096][   T12] usb usb4: SerialNumber: f10f8000.usb3
[    3.194107][   T12] hub 4-0:1.0: USB hub found
[    3.198724][   T12] hub 4-0:1.0: 1 port detected
[    3.203714][   T12] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.212655][   T12] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    3.221683][   T12] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.229701][   T12] usb usb5: Product: xHCI Host Controller
[    3.235308][   T12] usb usb5: Manufacturer: Linux 6.5.7-mvebu-tld-1 xhci-hcd
[    3.242409][   T12] usb usb5: SerialNumber: f10f8000.usb3
[    3.248297][   T12] hub 5-0:1.0: USB hub found
[    3.252793][   T12] hub 5-0:1.0: 1 port detected
[    3.258574][    T1] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.266837][    T1] clk: Disabling unused clocks
[    3.271931][    T1] Waiting 10 sec before mounting root device...
[   13.307530][    T1] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[   13.316567][    T1] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   13.334697][    T1] EXT4-fs (sda1): mounted filesystem 5c96dcf2-3df7-4757-95a5-37b8e661876a ro with ordered data mode. Quota mode: none.
[   13.347109][    T1] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[   13.358719][    T1] devtmpfs: mounted
[   13.364364][    T1] Freeing unused kernel image (initmem) memory: 1024K
[   13.371662][    T1] Checked W+X mappings: passed, no W+X pages found
[   13.378083][    T1] Run /bin/systemd as init process
[   13.389038][    T1] Kernel panic - not syncing: Requested init /bin/systemd failed (error -2).
[   13.397708][    T1] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.5.7-mvebu-tld-1 #1
[   13.405323][    T1] Hardware name: Marvell Armada 380/385 (Device Tree)
[   13.411977][    T1]  unwind_backtrace from show_stack+0x10/0x14
[   13.417948][    T1]  show_stack from dump_stack_lvl+0x40/0x4c
[   13.423735][    T1]  dump_stack_lvl from panic+0x104/0x308
[   13.429256][    T1]  panic from kernel_init+0xa0/0x130
[   13.434428][    T1]  kernel_init from ret_from_fork+0x14/0x28
[   13.440212][    T1] Exception stack(0xf0831fb0 to 0xf0831ff8)
[   13.445993][    T1] 1fa0:                                     00000000 00000000 00000000 00000000
[   13.454915][    T1] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   13.463836][    T1] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   13.471191][    C0] CPU0: stopping
[   13.471196][    C0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.5.7-mvebu-tld-1 #1
[   13.471203][    C0] Hardware name: Marvell Armada 380/385 (Device Tree)
[   13.471207][    C0]  unwind_backtrace from show_stack+0x10/0x14
[   13.471223][    C0]  show_stack from dump_stack_lvl+0x40/0x4c
[   13.471232][    C0]  dump_stack_lvl from do_handle_IPI+0x84/0x11c
[   13.471243][    C0]  do_handle_IPI from ipi_handler+0x14/0x20
[   13.471254][    C0]  ipi_handler from handle_percpu_devid_irq+0x4c/0xe8
[   13.471269][    C0]  handle_percpu_devid_irq from handle_irq_desc+0x1c/0x2c
[   13.471286][    C0]  handle_irq_desc from gic_handle_irq+0x58/0x64
[   13.471299][    C0]  gic_handle_irq from generic_handle_arch_irq+0x28/0x3c
[   13.471308][    C0]  generic_handle_arch_irq from __irq_svc+0x88/0xc8
[   13.471317][    C0] Exception stack(0xc1001f20 to 0xc1001f68)
[   13.471324][    C0] 1f20: 00000000 c0ddbca8 0000103c 00000001 00000000 00000000 00000000 c100e140
[   13.471331][    C0] 1f40: c100a010 c100a070 c0f42104 0000011f 00000001 c1001f70 c0a73cb0 c0a73cb4
[   13.471335][    C0] 1f60: 20000113 ffffffff
[   13.471339][    C0]  __irq_svc from default_idle_call+0x28/0x2c
[   13.471349][    C0]  default_idle_call from do_idle+0x108/0x280
[   13.471360][    C0]  do_idle from cpu_startup_entry+0x28/0x2c
[   13.471369][    C0]  cpu_startup_entry from rest_init+0xb8/0xd4
[   13.471379][    C0]  rest_init from arch_post_acpi_subsys_init+0x0/0x8
[   13.603887][    T1] ---[ end Kernel panic - not syncing: Requested init /bin/systemd failed (error -2). ]---
]]> Storm Debian Fri, 10 Oct 2025 09:03:58 -0500 https://forum.doozan.com/read.php?2,140332,140334#msg-140334 Re: WD My Cloud EX2 Ultra not booting after upgrade to Debian Trixie https://forum.doozan.com/read.php?2,140332,140334#msg-140334
You did not post the whole dmesg log, so it's hard to tell what's going on.

Also, have you tried booting with sysvinit to see if the same problem occurs?]]> bodhi Debian Thu, 09 Oct 2025 16:16:44 -0500 https://forum.doozan.com/read.php?2,140332,140332#msg-140332 WD My Cloud EX2 Ultra not booting after upgrade to Debian Trixie https://forum.doozan.com/read.php?2,140332,140332#msg-140332 Anyone a suggestion what to do? 
[    3.264117][    T1] Waiting 10 sec before mounting root device...
[   13.307556][    T1] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[   13.316572][    T1] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   13.334677][    T1] EXT4-fs (sda1): mounted filesystem 5c96dcf2-3df7-4757-95a5-37b8e661876a ro with ordered data mode. Quota mode: none.
[   13.347103][    T1] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[   13.358726][    T1] devtmpfs: mounted
[   13.364355][    T1] Freeing unused kernel image (initmem) memory: 1024K
[   13.371632][    T1] Checked W+X mappings: passed, no W+X pages found
[   13.378090][    T1] Run /bin/systemd as init process
[   13.389039][    T1] Kernel panic - not syncing: Requested init /bin/systemd failed (error -2).
[   13.397709][    T1] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.5.7-mvebu-tld-1 #1
[   13.405325][    T1] Hardware name: Marvell Armada 380/385 (Device Tree)
[   13.411978][    T1]  unwind_backtrace from show_stack+0x10/0x14
[   13.417949][    T1]  show_stack from dump_stack_lvl+0x40/0x4c
[   13.423735][    T1]  dump_stack_lvl from panic+0x104/0x308
[   13.429258][    T1]  panic from kernel_init+0xa0/0x130
[   13.434430][    T1]  kernel_init from ret_from_fork+0x14/0x28
[   13.440214][    T1] Exception stack(0xf0831fb0 to 0xf0831ff8)
[   13.445994][    T1] 1fa0:                                     00000000 00000000 00000000 00000000
[   13.454916][    T1] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   13.463839][    T1] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   13.471193][    C0] CPU0: stopping
[   13.471198][    C0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.5.7-mvebu-tld-1 #1
[   13.471206][    C0] Hardware name: Marvell Armada 380/385 (Device Tree)
[   13.471210][    C0]  unwind_backtrace from show_stack+0x10/0x14
[   13.471225][    C0]  show_stack from dump_stack_lvl+0x40/0x4c
[   13.471235][    C0]  dump_stack_lvl from do_handle_IPI+0x84/0x11c
[   13.471245][    C0]  do_handle_IPI from ipi_handler+0x14/0x20
[   13.471256][    C0]  ipi_handler from handle_percpu_devid_irq+0x4c/0xe8
[   13.471271][    C0]  handle_percpu_devid_irq from handle_irq_desc+0x1c/0x2c
[   13.471288][    C0]  handle_irq_desc from gic_handle_irq+0x58/0x64
[   13.471302][    C0]  gic_handle_irq from generic_handle_arch_irq+0x28/0x3c
[   13.471310][    C0]  generic_handle_arch_irq from __irq_svc+0x88/0xc8
[   13.471319][    C0] Exception stack(0xc1001f20 to 0xc1001f68)
[   13.471327][    C0] 1f20: 00000000 c0ddbca8 00001ad4 00000001 00000000 00000000 00000000 c100e140
[   13.471334][    C0] 1f40: c100a010 c100a070 c0f42104 0000011f 00000001 c1001f70 c0a73cb0 c0a73cb4
[   13.471338][    C0] 1f60: 20000113 ffffffff
[   13.471342][    C0]  __irq_svc from default_idle_call+0x28/0x2c
[   13.471351][    C0]  default_idle_call from do_idle+0x108/0x280
[   13.471363][    C0]  do_idle from cpu_startup_entry+0x28/0x2c
[   13.471371][    C0]  cpu_startup_entry from rest_init+0xb8/0xd4
[   13.471381][    C0]  rest_init from arch_post_acpi_subsys_init+0x0/0x8
[   13.603889][    T1] ---[ end Kernel panic - not syncing: Requested init /bin/systemd failed (error -2). ]---
]]> Storm Debian Thu, 09 Oct 2025 15:33:00 -0500