This was put out on 10/28 after the last 10/23 build here. Kirkwood: bugfix: DRAM size initialization If start of any DRAM bank is greater than total DDR size, remaining DDR banks' start address & size were left un-initialized in dram_init function. This could break other functions who uses array 'gd->bd->bi_dram'. Kirkwood network driver is one example. This also stops Linux kernel from booting. v2 - Set start address also to 0. Without this Linux kernel couldn't boot up Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=28e57108a61bd0e554d9847170b8ad9dad093e07 https://forum.doozan.com/read.php?3,2379,2379#msg-2379 Thu, 12 Mar 2026 08:58:42 -0500 Phorum 5.2.23 https://forum.doozan.com/read.php?3,2379,2379#msg-2379 https://forum.doozan.com/read.php?3,2379,2379#msg-2379

Kirkwood: bugfix: DRAM size initialization


If start of any DRAM bank is greater than total DDR size, remaining DDR banks' start address & size were left un-initialized in dram_init function. This could break other functions who uses array 'gd->bd->bi_dram'. Kirkwood network driver is one example. This also stops Linux kernel from booting.


v2 - Set start address also to 0. Without this Linux kernel couldn't

boot up



Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>

http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=28e57108a61bd0e554d9847170b8ad9dad093e07]]> anon uBoot Sat, 13 Nov 2010 15:02:23 -0600