[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.19.2-mvebu-370xp-tld-1 (root@tldDebian) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1.0 PREEMPT Sun Aug 21 14:07:19 PDT 2022 [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NETGEAR ReadyNAS 104 [ 0.000000] printk: bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=pxa3xx_nand-0:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x400000@0x800000(minirootfs),-(ubifs) earlyprintk=serial mtdparts=pxa3xx_nand-0:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x400000@0x800000(minirootfs),-(ubifs) reason=normal bdtype=rn104 [ 0.000000] Unknown kernel command line parameters "reason=normal bdtype=rn104", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 490124K/524288K available (10240K kernel code, 1494K rwdata, 3404K rodata, 1024K init, 468K bss, 34164K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C: DT/platform modifies aux control register: 0x12086300 -> 0x1a086302 [ 0.000000] Aurora cache controller enabled, 4 ways, 256 kB [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.000000] Switching to timer-based delay loop, resolution 53ns [ 0.000001] sched_clock: 32 bits at 19MHz, resolution 53ns, wraps every 114537122277ns [ 0.007872] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 101938038664 ns [ 0.019438] Console: colour dummy device 80x30 [ 0.024168] Calibrating delay loop (skipped), value calculated using timer frequency.. 37.49 BogoMIPS (lpj=187492) [ 0.034290] pid_max: default: 32768 minimum: 301 [ 0.039478] LSM: Security Framework initializing [ 0.044515] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051848] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.060642] CPU: Testing write buffer coherency: ok [ 0.067273] cblist_init_generic: Setting adjustable number of callback queues. [ 0.074562] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.080915] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.087295] Setting up static identity map for 0x100000 - 0x100060 [ 0.093961] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1 [ 0.099425] mvebu-pmsu: Initializing Power Management Service Unit [ 0.105919] rcu: Hierarchical SRCU implementation. [ 0.110959] rcu: Max phase no-delay instances is 1000. [ 0.117666] devtmpfs: initialized [ 0.126529] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 0.134613] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.144256] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.151252] prandom: seed boundary self test passed [ 0.158862] prandom: 100 self tests passed [ 0.163239] pinctrl core: initialized pinctrl subsystem [ 0.170397] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.177540] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.185256] audit: initializing netlink subsys (disabled) [ 0.191888] thermal_sys: Registered thermal governor 'step_wise' [ 0.192162] audit: type=2000 audit(0.170:1): state=initialized audit_enabled=0 res=1 [ 0.206074] cpuidle: using governor ladder [ 0.210496] cpuidle: using governor menu [ 0.214934] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.221017] mvebu-pmsu: CPU idle is currently broken: disabling [ 0.608551] raid6: int32x8 gen() 212 MB/s [ 0.948547] raid6: int32x4 gen() 232 MB/s [ 1.288562] raid6: int32x2 gen() 360 MB/s [ 1.628545] raid6: int32x1 gen() 408 MB/s [ 1.633086] raid6: using algorithm int32x1 gen() 408 MB/s [ 1.988545] raid6: .... xor() 171 MB/s, rmw enabled [ 1.993643] raid6: using intx1 recovery algorithm [ 2.009777] SCSI subsystem initialized [ 2.014177] libata version 3.00 loaded. [ 2.014480] usbcore: registered new interface driver usbfs [ 2.028646] usbcore: registered new interface driver hub [ 2.034203] usbcore: registered new device driver usb [ 2.048995] pps_core: LinuxPPS API ver. 1 registered [ 2.054169] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.078575] PTP clock support registered [ 2.089990] vgaarb: loaded [ 2.099139] clocksource: Switched to clocksource armada_370_xp_clocksource [ 2.120027] VFS: Disk quotas dquot_6.6.0 [ 2.124320] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.160606] NET: Registered PF_INET protocol family [ 2.166096] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.189605] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.198317] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.219200] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.226957] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.249193] TCP: Hash tables configured (established 4096 bind 4096) [ 2.256014] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear) [ 2.279284] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.285901] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.309389] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.315949] RPC: Registered named UNIX socket transport module. [ 2.329185] RPC: Registered udp transport module. [ 2.334123] RPC: Registered tcp transport module. [ 2.339050] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.359160] PCI: CLS 0 bytes, default 64 [ 2.363770] Trying to unpack rootfs image as initramfs... [ 2.389474] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.396374] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 2.530441] Initialise system trusted keyrings [ 2.535215] Key type blacklist registered [ 2.549610] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 2.556263] zbud: loaded [ 2.571330] NFS: Registering the id_resolver key type [ 2.576628] Key type id_resolver registered [ 2.589243] Key type id_legacy registered [ 2.593664] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.619411] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.626826] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.782049] xor: measuring software checksum speed [ 2.809321] arm4regs : 1148 MB/sec [ 2.839425] 8regs : 964 MB/sec [ 2.859238] 32regs : 1113 MB/sec [ 2.863883] xor: using function: arm4regs (1148 MB/sec) [ 2.879304] async_tx: api initialized (async) [ 2.883958] Key type asymmetric registered [ 2.888335] Asymmetric key parser 'x509' registered [ 3.278759] Freeing initrd memory: 10152K [ 3.310369] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 3.316994] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 3.324859] io scheduler bfq registered [ 3.332167] armada-370-pinctrl d0018000.pin-ctrl: registered pinctrl driver [ 3.345380] debugfs: Directory 'd0018100.gpio' with parent 'regmap' already present! [ 3.356649] debugfs: Directory 'd0018140.gpio' with parent 'regmap' already present! [ 3.368335] mvebu-pcie soc:pcie@82000000: host bridge /soc/pcie@82000000 ranges: [ 3.378230] mvebu-pcie soc:pcie@82000000: Parsing ranges property... [ 3.378281] mvebu-pcie soc:pcie@82000000: MEM 0x00d0040000..0x00d0041fff -> 0x0000040000 [ 3.386955] mvebu-pcie soc:pcie@82000000: MEM 0x00d0080000..0x00d0081fff -> 0x0000080000 [ 3.395688] mvebu-pcie soc:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000 [ 3.404663] mvebu-pcie soc:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000 [ 3.413620] mvebu-pcie soc:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000 [ 3.422548] mvebu-pcie soc:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000 [ 3.432285] mvebu-pcie soc:pcie@82000000: PCI host bridge to bus 0000:00 [ 3.439057] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.445040] pci_bus 0000:00: root bus resource [mem 0xd0040000-0xd0041fff] (bus address [0x00040000-0x00041fff]) [ 3.455077] pci_bus 0000:00: root bus resource [mem 0xd0080000-0xd0081fff] (bus address [0x00080000-0x00081fff]) [ 3.465050] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff] [ 3.472008] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 3.478373] pci_bus 0000:00: scanning bus [ 3.478552] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400 [ 3.485032] pci 0000:00:01.0: vgaarb: pci_notify [ 3.485355] pci 0000:00:02.0: [11ab:6710] type 01 class 0x060400 [ 3.492144] pci 0000:00:02.0: vgaarb: pci_notify [ 3.493372] pci_bus 0000:00: fixups for bus [ 3.493400] PCI: bus0: Fast back to back transfers disabled [ 3.499576] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0 [ 3.499600] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.507561] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 0 [ 3.507574] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.515631] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1 [ 3.515944] pci_bus 0000:01: scanning bus [ 3.516030] pci 0000:01:00.0: [1b73:1009] type 00 class 0x0c0330 [ 3.522515] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x4000ffff 64bit] [ 3.529475] pci 0000:01:00.0: reg 0x18: [mem 0x40010000-0x40010fff 64bit] [ 3.536327] pci 0000:01:00.0: reg 0x20: [mem 0x40011000-0x40011fff 64bit] [ 3.543307] pci 0000:01:00.0: supports D1 [ 3.547610] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 3.554098] pci 0000:01:00.0: PME# disabled [ 3.554404] pci 0000:01:00.0: vgaarb: pci_notify [ 3.554608] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 3.590243] pci_bus 0000:01: fixups for bus [ 3.590266] PCI: bus1: Fast back to back transfers disabled [ 3.595997] pci_bus 0000:01: bus scan returning with max=01 [ 3.596009] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.602750] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 1 [ 3.603092] pci_bus 0000:02: scanning bus [ 3.603148] pci 0000:02:00.0: [1b4b:9215] type 00 class 0x010601 [ 3.609699] pci 0000:02:00.0: reg 0x10: [io 0xfffffff8-0xffffffff] [ 3.616078] pci 0000:02:00.0: reg 0x14: [io 0xfffffffc-0xffffffff] [ 3.622552] pci 0000:02:00.0: reg 0x18: [io 0xfffffff8-0xffffffff] [ 3.628924] pci 0000:02:00.0: reg 0x1c: [io 0xfffffffc-0xffffffff] [ 3.635333] pci 0000:02:00.0: reg 0x20: [io 0xffffffe0-0xffffffff] [ 3.641739] pci 0000:02:00.0: reg 0x24: [mem 0x42000000-0x420007ff] [ 3.648110] pci 0000:02:00.0: reg 0x30: [mem 0xd0000000-0xd000ffff pref] [ 3.654918] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 3.660974] pci 0000:02:00.0: PME# supported from D3hot [ 3.666390] pci 0000:02:00.0: PME# disabled [ 3.666681] pci 0000:02:00.0: vgaarb: pci_notify [ 3.666885] pci 0000:00:02.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 3.700240] pci_bus 0000:02: fixups for bus [ 3.700263] PCI: bus2: Fast back to back transfers disabled [ 3.705993] pci_bus 0000:02: bus scan returning with max=02 [ 3.706005] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.712740] pci_bus 0000:00: bus scan returning with max=02 [ 3.712785] pci 0000:00:01.0: BAR 14: assigned [mem 0xf8000000-0xf80fffff] [ 3.719766] pci 0000:00:02.0: BAR 14: assigned [mem 0xf8100000-0xf81fffff] [ 3.726687] pci 0000:00:02.0: BAR 13: assigned [io 0x10000-0x10fff] [ 3.733235] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf800ffff 64bit] [ 3.740581] pci 0000:01:00.0: BAR 2: assigned [mem 0xf8010000-0xf8010fff 64bit] [ 3.747902] pci 0000:01:00.0: BAR 4: assigned [mem 0xf8011000-0xf8011fff 64bit] [ 3.755360] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.760553] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff] [ 3.767411] pci 0000:02:00.0: BAR 6: assigned [mem 0xf8100000-0xf810ffff pref] [ 3.774659] pci 0000:02:00.0: BAR 5: assigned [mem 0xf8110000-0xf81107ff] [ 3.781511] pci 0000:02:00.0: BAR 4: assigned [io 0x10000-0x1001f] [ 3.787875] pci 0000:02:00.0: BAR 0: assigned [io 0x10020-0x10027] [ 3.794250] pci 0000:02:00.0: BAR 2: assigned [io 0x10028-0x1002f] [ 3.800626] pci 0000:02:00.0: BAR 1: assigned [io 0x10030-0x10033] [ 3.806990] pci 0000:02:00.0: BAR 3: assigned [io 0x10034-0x10037] [ 3.813366] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.818538] pci 0000:00:02.0: bridge window [io 0x10000-0x10fff] [ 3.824914] pci 0000:00:02.0: bridge window [mem 0xf8100000-0xf81fffff] [ 3.831939] pcieport 0000:00:01.0: vgaarb: pci_notify [ 3.831976] pcieport 0000:00:01.0: assign IRQ: got 0 [ 3.831998] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.838211] pcieport 0000:00:01.0: enabling bus mastering [ 3.838254] pcieport 0000:00:01.0: vgaarb: pci_notify [ 3.838315] pcieport 0000:00:02.0: vgaarb: pci_notify [ 3.838337] pcieport 0000:00:02.0: assign IRQ: got 0 [ 3.838353] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.844594] pcieport 0000:00:02.0: enabling bus mastering [ 3.844631] pcieport 0000:00:02.0: vgaarb: pci_notify [ 3.844667] pci 0000:00:01.0: enabling bus mastering [ 3.845890] mv_xor d0060800.xor: Marvell shared XOR driver [ 3.910351] mv_xor d0060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 3.921473] mv_xor d0060900.xor: Marvell shared XOR driver [ 3.990556] mv_xor d0060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.264256] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.276750] printk: console [ttyS0] disabled [ 4.304840] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 31, base_baud = 12500000) is a 16550A [ 4.314103] printk: console [ttyS0] enabled [ 4.323152] printk: bootconsole [earlycon0] disabled [ 4.336065] ahci 0000:02:00.0: vgaarb: pci_notify [ 4.336198] ahci 0000:02:00.0: assign IRQ: got 32 [ 4.336223] ahci 0000:02:00.0: version 3.0 [ 4.336251] pci 0000:00:02.0: enabling bus mastering [ 4.336267] ahci 0000:02:00.0: enabling device (0146 -> 0147) [ 4.354922] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 4.363089] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 4.379004] scsi host0: ahci [ 4.384368] scsi host1: ahci [ 4.389621] scsi host2: ahci [ 4.394717] scsi host3: ahci [ 4.398367] ata1: SATA max UDMA/133 abar m2048@0xf8110000 port 0xf8110100 irq 33 [ 4.407160] ata2: SATA max UDMA/133 abar m2048@0xf8110000 port 0xf8110180 irq 33 [ 4.414938] ata3: SATA max UDMA/133 abar m2048@0xf8110000 port 0xf8110200 irq 33 [ 4.422536] ata4: SATA max UDMA/133 abar m2048@0xf8110000 port 0xf8110280 irq 33 [ 4.430296] ahci 0000:02:00.0: vgaarb: pci_notify [ 4.430901] sata_mv d00a0000.sata: version 1.28 [ 4.431347] sata_mv d00a0000.sata: slots 32 ports 1 [ 4.440558] scsi host4: sata_mv [ 4.445179] ata5: SATA max UDMA/133 irq 34 [ 4.451399] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 4.457917] nand: Hynix H27U1G8F2BTR-BC [ 4.463841] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 4.472111] Bad block table found at page 65472, version 0x01 [ 4.478586] Bad block table found at page 65408, version 0x01 [ 4.484904] 5 cmdlinepart partitions found on MTD device pxa3xx_nand-0 [ 4.491714] Creating 5 MTD partitions on "pxa3xx_nand-0": [ 4.497422] 0x000000000000-0x000000180000 : "u-boot" [ 4.505070] 0x000000180000-0x0000001a0000 : "u-boot-env" [ 4.514042] 0x000000200000-0x000000800000 : "uImage" [ 4.522774] 0x000000800000-0x000000c00000 : "minirootfs" [ 4.531834] 0x000000c00000-0x000008000000 : "ubifs" [ 4.542375] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 4.552793] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 4.610630] mvneta d0070000.ethernet eth0: Using random mac address 3e:81:df:74:ce:dd [ 4.625092] mvneta d0074000.ethernet eth1: Using random mac address c6:30:94:7b:46:03 [ 4.635829] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.643496] ehci-pci: EHCI PCI platform driver [ 4.648704] ehci-orion: EHCI orion driver [ 4.653884] orion-ehci d0050000.usb: EHCI Host Controller [ 4.659800] orion-ehci d0050000.usb: new USB bus registered, assigned bus number 1 [ 4.667639] orion-ehci d0050000.usb: irq 38, io mem 0xd0050000 [ 4.699156] orion-ehci d0050000.usb: USB 2.0 started, EHCI 1.00 [ 4.705597] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 [ 4.713967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.721338] usb usb1: Product: EHCI Host Controller [ 4.726527] usb usb1: Manufacturer: Linux 5.19.2-mvebu-370xp-tld-1 ehci_hcd [ 4.733643] usb usb1: SerialNumber: d0050000.usb [ 4.739776] hub 1-0:1.0: USB hub found [ 4.744577] hub 1-0:1.0: 1 port detected [ 4.750786] usbcore: registered new interface driver usblp [ 4.758157] usbcore: registered new interface driver usb-storage [ 4.764451] ata2: SATA link down (SStatus 0 SControl 300) [ 4.770483] ata1: SATA link down (SStatus 0 SControl 300) [ 4.777041] mousedev: PS/2 mouse device common for all mice [ 4.783986] ata4: SATA link down (SStatus 0 SControl 300) [ 4.792187] i2c_dev: i2c /dev entries driver [ 4.803194] rtc-ds1307 0-0068: 'wakeup-source' is set, request for an IRQ is disabled! [ 4.816364] rtc-ds1307 0-0068: registered as rtc0 [ 4.823844] rtc-ds1307 0-0068: setting system clock to 2023-01-13T16:41:28 UTC (1673628088) [ 4.833425] pca953x 0-0023: supply vcc not found, using dummy regulator [ 4.841676] pca953x 0-0023: using no AI [ 4.881143] orion_wdt: Initial timeout 229 sec [ 4.888502] device-mapper: uevent: version 1.0.3 [ 4.894325] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 4.903563] device-mapper: multipath round-robin: version 1.2.0 loaded [ 4.910448] device-mapper: multipath queue-length: version 0.2.0 loaded [ 4.917193] device-mapper: multipath service-time: version 0.3.0 loaded [ 4.924057] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 4.930387] device-mapper: raid: Loading target version 1.15.1 [ 4.945188] marvell-cesa d0090000.crypto: CESA device successfully registered [ 4.952532] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 4.959199] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.966857] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 4.972863] ata5.00: ATA-9: WDC WDS120G2G0A-00JH30, UE510000, max UDMA/133 [ 4.979918] hid: raw HID events driver (C) Jiri Kosina [ 4.986573] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32) [ 4.993898] usbcore: registered new interface driver usbhid [ 4.999747] ata5.00: 234455040 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 5.007622] usbhid: USB HID core driver [ 5.012939] drop_monitor: Initializing network drop monitor service [ 5.019769] ata3.00: configured for UDMA/133 [ 5.024472] ata5.00: Features: Dev-Sleep [ 5.030283] NET: Registered PF_INET6 protocol family [ 5.036381] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 5.044875] ata5.00: configured for UDMA/133 [ 5.051318] Segment Routing with IPv6 [ 5.055357] RPL Segment Routing with IPv6 [ 5.061788] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.070725] scsi 4:0:0:0: Direct-Access ATA WDC WDS120G2G0A- 0000 PQ: 0 ANSI: 5 [ 5.080272] In-situ OAM (IOAM) with IPv6 [ 5.084643] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.090963] sd 2:0:0:0: [sda] Write Protect is off [ 5.096035] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.097848] sd 4:0:0:0: [sdb] 234455040 512-byte logical blocks: (120 GB/112 GiB) [ 5.107232] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.116497] sd 4:0:0:0: [sdb] Write Protect is off [ 5.123920] NET: Registered PF_PACKET protocol family [ 5.130248] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.130425] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.139653] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.146456] 8021q: 802.1Q VLAN Support v1.8 [ 5.151505] Key type dns_resolver registered [ 5.156339] ThumbEE CPU extension supported. [ 5.162001] sd 4:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 5.171861] sdb: sdb1 [ 5.175075] Registering SWP/SWPB emulation handler [ 5.180660] sd 4:0:0:0: [sdb] Attached SCSI disk [ 5.187054] registered taskstats version 1 [ 5.191874] Loading compiled-in X.509 certificates [ 5.197711] zswap: loaded using pool lzo/zbud [ 5.203060] Key type ._fscrypt registered [ 5.207411] Key type .fscrypt registered [ 5.211765] Key type fscrypt-provisioning registered [ 5.220630] Key type big_key registered [ 5.248560] Key type encrypted registered [ 5.264535] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.308652] sda: sda1 [ 5.312330] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 5.321097] Freeing unused kernel image (initmem) memory: 1024K [ 5.341233] Checked W+X mappings: passed, no W+X pages found [ 5.347119] Run /init as init process [ 5.351234] with arguments: [ 5.351246] /init [ 5.351252] with environment: [ 5.351259] HOME=/ [ 5.351265] TERM=linux [ 5.351271] reason=normal [ 5.351277] bdtype=rn104 [ 6.847352] mtdblock: MTD device 'u-boot' is NAND, please consider using UBI block devices instead. [ 6.870770] mtdblock: MTD device 'u-boot-env' is NAND, please consider using UBI block devices instead. [ 6.883155] mtdblock: MTD device 'uImage' is NAND, please consider using UBI block devices instead. [ 6.905528] mtdblock: MTD device 'minirootfs' is NAND, please consider using UBI block devices instead. [ 6.920379] mtdblock: MTD device 'ubifs' is NAND, please consider using UBI block devices instead. [ 6.966218] xhci_hcd 0000:01:00.0: vgaarb: pci_notify [ 6.966358] xhci_hcd 0000:01:00.0: assign IRQ: got 44 [ 6.966440] xhci_hcd 0000:01:00.0: enabling bus mastering [ 6.966458] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 7.032833] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 7.077240] xhci_hcd 0000:01:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010 [ 7.139380] xhci_hcd 0000:01:00.0: enabling Mem-Wr-Inval [ 7.140203] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 7.145718] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 7.228330] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 7.264281] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 [ 7.302592] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.337395] usb usb2: Product: xHCI Host Controller [ 7.365457] usb usb2: Manufacturer: Linux 5.19.2-mvebu-370xp-tld-1 xhci-hcd [ 7.400365] usb usb2: SerialNumber: 0000:01:00.0 [ 7.427625] hub 2-0:1.0: USB hub found [ 7.447213] hub 2-0:1.0: 2 ports detected [ 7.471962] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 7.516323] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19 [ 7.556251] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.590606] usb usb3: Product: xHCI Host Controller [ 7.595773] usb usb3: Manufacturer: Linux 5.19.2-mvebu-370xp-tld-1 xhci-hcd [ 7.649296] usb usb3: SerialNumber: 0000:01:00.0 [ 7.678434] hub 3-0:1.0: USB hub found [ 7.699306] hub 3-0:1.0: 2 ports detected [ 7.722439] xhci_hcd 0000:01:00.0: vgaarb: pci_notify [ 21.653168] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 21.737600] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none. [ 25.046130] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 25.120469] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 25.140595] mtdblock: MTD device 'uImage' is NAND, please consider using UBI block devices instead. [ 25.215116] mtdblock: MTD device 'u-boot' is NAND, please consider using UBI block devices instead. [ 25.290617] mtdblock: MTD device 'u-boot-env' is NAND, please consider using UBI block devices instead. [ 25.346129] mtdblock: MTD device 'minirootfs' is NAND, please consider using UBI block devices instead. [ 25.361950] mtdblock: MTD device 'ubifs' is NAND, please consider using UBI block devices instead. [ 27.182888] random: crng init done [ 31.488135] EXT4-fs (sdb1): re-mounted. Quota mode: none. [ 33.071453] Adding 1048572k swap on /swapfile. Priority:-2 extents:19 across:33822032k SSFS [ 33.833022] mvneta d0070000.ethernet eth0: PHY [d0072004.mdio-mii:00] driver [Marvell 88E1318S] (irq=POLL) [ 33.848450] mvneta d0070000.ethernet eth0: configuring for phy/rgmii-id link mode [ 38.019592] mvneta d0070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 38.027663] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 48.649953] Setting Persistent MAC address to 01:23:45:67:89:ab [ 49.843707] mvneta d0070000.ethernet eth0: Link is Down [ 50.045091] mvneta d0070000.ethernet eth0: PHY [d0072004.mdio-mii:00] driver [Marvell 88E1318S] (irq=POLL) [ 50.054931] mvneta d0070000.ethernet eth0: configuring for phy/rgmii-id link mode [ 53.219595] mvneta d0070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 53.227670] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready