[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.8-mvebu-370xp-tld-1 (root@tldDebian) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1.0 PREEMPT Tue Jan 24 23:39:41 PST 2023 [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NETGEAR ReadyNAS 102 [ 0.000000] printk: bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=pxa3xx_nand-0:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x400000@0x800000(minirootfs),-(ubifs) earlyprintk=serial mtdparts=pxa3xx_nand-0:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x400000@0x800000(minirootfs),-(ubifs) reason=normal bdtype=rn102 [ 0.000000] Unknown kernel command line parameters "reason=normal bdtype=rn102", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 489072K/524288K available (10240K kernel code, 1525K rwdata, 3408K rodata, 1024K init, 474K bss, 35216K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C: DT/platform modifies aux control register: 0x12086300 -> 0x1a086302 [ 0.000000] Aurora cache controller enabled, 4 ways, 256 kB [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 53ns [ 0.000001] sched_clock: 32 bits at 19MHz, resolution 53ns, wraps every 114537122277ns [ 0.007873] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 101938038664 ns [ 0.019243] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.028484] Console: colour dummy device 80x30 [ 0.033257] Calibrating delay loop (skipped), value calculated using timer frequency.. 37.49 BogoMIPS (lpj=187492) [ 0.043358] pid_max: default: 32768 minimum: 301 [ 0.048613] LSM: Security Framework initializing [ 0.053638] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.060976] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.069978] CPU: Testing write buffer coherency: ok [ 0.076658] cblist_init_generic: Setting adjustable number of callback queues. [ 0.083952] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.090315] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.096704] Setting up static identity map for 0x100000 - 0x100060 [ 0.103382] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1 [ 0.108853] mvebu-pmsu: Initializing Power Management Service Unit [ 0.115357] rcu: Hierarchical SRCU implementation. [ 0.120399] rcu: Max phase no-delay instances is 1000. [ 0.127131] devtmpfs: initialized [ 0.136529] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 0.144623] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.154272] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.161337] prandom: seed boundary self test passed [ 0.168953] prandom: 100 self tests passed [ 0.173331] pinctrl core: initialized pinctrl subsystem [ 0.180648] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.187847] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.195613] audit: initializing netlink subsys (disabled) [ 0.202309] thermal_sys: Registered thermal governor 'step_wise' [ 0.202529] audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1 [ 0.216448] cpuidle: using governor ladder [ 0.220873] cpuidle: using governor menu [ 0.225335] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.231430] mvebu-pmsu: CPU idle is currently broken: disabling [ 0.618550] raid6: int32x8 gen() 212 MB/s [ 0.958546] raid6: int32x4 gen() 232 MB/s [ 1.298562] raid6: int32x2 gen() 360 MB/s [ 1.638545] raid6: int32x1 gen() 408 MB/s [ 1.643088] raid6: using algorithm int32x1 gen() 408 MB/s [ 1.998544] raid6: .... xor() 171 MB/s, rmw enabled [ 2.003641] raid6: using intx1 recovery algorithm [ 2.019994] SCSI subsystem initialized [ 2.028673] libata version 3.00 loaded. [ 2.029016] usbcore: registered new interface driver usbfs [ 2.034724] usbcore: registered new interface driver hub [ 2.048749] usbcore: registered new device driver usb [ 2.054506] pps_core: LinuxPPS API ver. 1 registered [ 2.078545] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.087551] PTP clock support registered [ 2.100322] vgaarb: loaded [ 2.109155] clocksource: Switched to clocksource armada_370_xp_clocksource [ 2.130089] VFS: Disk quotas dquot_6.6.0 [ 2.134385] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.170284] NET: Registered PF_INET protocol family [ 2.179335] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.199637] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.208354] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.229201] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.236978] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.259219] TCP: Hash tables configured (established 4096 bind 4096) [ 2.265991] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear) [ 2.289317] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.295937] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.319389] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.329795] RPC: Registered named UNIX socket transport module. [ 2.335848] RPC: Registered udp transport module. [ 2.349172] RPC: Registered tcp transport module. [ 2.354106] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.379193] PCI: CLS 0 bytes, default 64 [ 2.383867] Trying to unpack rootfs image as initramfs... [ 2.389725] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.396652] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 2.616463] Initialise system trusted keyrings [ 2.629476] Key type blacklist registered [ 2.634791] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 2.649408] zbud: loaded [ 2.660014] NFS: Registering the id_resolver key type [ 2.665314] Key type id_resolver registered [ 2.679291] Key type id_legacy registered [ 2.683724] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.709437] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.869903] xor: measuring software checksum speed [ 2.889298] arm4regs : 1148 MB/sec [ 2.909252] 8regs : 963 MB/sec [ 2.939378] 32regs : 1113 MB/sec [ 2.944022] xor: using function: arm4regs (1148 MB/sec) [ 2.959281] async_tx: api initialized (async) [ 2.963933] Key type asymmetric registered [ 2.968310] Asymmetric key parser 'x509' registered [ 3.371538] Freeing initrd memory: 10656K [ 3.408042] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 3.414592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 3.422602] io scheduler bfq registered [ 3.430960] armada-370-pinctrl d0018000.pin-ctrl: registered pinctrl driver [ 3.444527] debugfs: Directory 'd0018100.gpio' with parent 'regmap' already present! [ 3.455771] debugfs: Directory 'd0018140.gpio' with parent 'regmap' already present! [ 3.467702] mvebu-pcie soc:pcie@82000000: host bridge /soc/pcie@82000000 ranges: [ 3.477866] mvebu-pcie soc:pcie@82000000: Parsing ranges property... [ 3.477915] mvebu-pcie soc:pcie@82000000: MEM 0x00d0040000..0x00d0041fff -> 0x0000040000 [ 3.486707] mvebu-pcie soc:pcie@82000000: MEM 0x00d0080000..0x00d0081fff -> 0x0000080000 [ 3.495377] mvebu-pcie soc:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000 [ 3.504349] mvebu-pcie soc:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000 [ 3.513310] mvebu-pcie soc:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000 [ 3.522242] mvebu-pcie soc:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000 [ 3.531980] mvebu-pcie soc:pcie@82000000: PCI host bridge to bus 0000:00 [ 3.538754] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.544785] pci_bus 0000:00: root bus resource [mem 0xd0040000-0xd0041fff] (bus address [0x00040000-0x00041fff]) [ 3.554838] pci_bus 0000:00: root bus resource [mem 0xd0080000-0xd0081fff] (bus address [0x00080000-0x00081fff]) [ 3.564816] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff] [ 3.571779] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 3.578144] pci_bus 0000:00: scanning bus [ 3.578324] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400 [ 3.584867] pci 0000:00:01.0: vgaarb: pci_notify [ 3.585131] pci 0000:00:02.0: [11ab:6710] type 01 class 0x060400 [ 3.592097] pci 0000:00:02.0: vgaarb: pci_notify [ 3.593334] pci_bus 0000:00: fixups for bus [ 3.593363] PCI: bus0: Fast back to back transfers disabled [ 3.599095] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0 [ 3.599109] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.607482] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 0 [ 3.607504] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.615565] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1 [ 3.615928] pci_bus 0000:01: scanning bus [ 3.616011] pci 0000:01:00.0: [1b4b:9170] type 00 class 0x010601 [ 3.622557] pci 0000:01:00.0: reg 0x10: [io 0xfffffff8-0xffffffff] [ 3.628938] pci 0000:01:00.0: reg 0x14: [io 0xfffffffc-0xffffffff] [ 3.635431] pci 0000:01:00.0: reg 0x18: [io 0xfffffff8-0xffffffff] [ 3.642032] pci 0000:01:00.0: reg 0x1c: [io 0xfffffffc-0xffffffff] [ 3.648405] pci 0000:01:00.0: reg 0x20: [io 0xfffffff0-0xffffffff] [ 3.654819] pci 0000:01:00.0: reg 0x24: [mem 0x40000000-0x400001ff] [ 3.661217] pci 0000:01:00.0: reg 0x30: [mem 0xd0000000-0xd000ffff pref] [ 3.668001] pci 0000:01:00.0: Enabling fixed DMA alias to 00.1 [ 3.674059] pci 0000:01:00.0: PME# supported from D3hot [ 3.679510] pci 0000:01:00.0: PME# disabled [ 3.679852] pci 0000:01:00.0: vgaarb: pci_notify [ 3.680054] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 3.709324] pci_bus 0000:01: fixups for bus [ 3.709351] PCI: bus1: Fast back to back transfers disabled [ 3.715081] pci_bus 0000:01: bus scan returning with max=01 [ 3.715094] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.721828] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 1 [ 3.722173] pci_bus 0000:02: scanning bus [ 3.722233] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330 [ 3.728382] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x4200ffff 64bit] [ 3.735602] pci 0000:02:00.0: reg 0x18: [mem 0x42010000-0x42010fff 64bit] [ 3.742577] pci 0000:02:00.0: reg 0x20: [mem 0x42011000-0x42011fff 64bit] [ 3.749566] pci 0000:02:00.0: supports D1 [ 3.753869] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold [ 3.760358] pci 0000:02:00.0: PME# disabled [ 3.760694] pci 0000:02:00.0: vgaarb: pci_notify [ 3.760897] pci 0000:00:02.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 3.799235] pci_bus 0000:02: fixups for bus [ 3.799259] PCI: bus2: Fast back to back transfers disabled [ 3.804988] pci_bus 0000:02: bus scan returning with max=02 [ 3.805000] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.811756] pci_bus 0000:00: bus scan returning with max=02 [ 3.811884] pci 0000:00:01.0: BAR 14: assigned [mem 0xf8000000-0xf80fffff] [ 3.818807] pci 0000:00:02.0: BAR 14: assigned [mem 0xf8100000-0xf81fffff] [ 3.825772] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff] [ 3.832371] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8000000-0xf800ffff pref] [ 3.839627] pci 0000:01:00.0: BAR 5: assigned [mem 0xf8010000-0xf80101ff] [ 3.846470] pci 0000:01:00.0: BAR 4: assigned [io 0x10000-0x1000f] [ 3.852851] pci 0000:01:00.0: BAR 0: assigned [io 0x10010-0x10017] [ 3.859229] pci 0000:01:00.0: BAR 2: assigned [io 0x10018-0x1001f] [ 3.865593] pci 0000:01:00.0: BAR 1: assigned [io 0x10020-0x10023] [ 3.872000] pci 0000:01:00.0: BAR 3: assigned [io 0x10024-0x10027] [ 3.878368] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.883555] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff] [ 3.889939] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff] [ 3.896790] pci 0000:02:00.0: BAR 0: assigned [mem 0xf8100000-0xf810ffff 64bit] [ 3.904125] pci 0000:02:00.0: BAR 2: assigned [mem 0xf8110000-0xf8110fff 64bit] [ 3.911456] pci 0000:02:00.0: BAR 4: assigned [mem 0xf8111000-0xf8111fff 64bit] [ 3.918776] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.923988] pci 0000:00:02.0: bridge window [mem 0xf8100000-0xf81fffff] [ 3.931001] pcieport 0000:00:01.0: vgaarb: pci_notify [ 3.931038] pcieport 0000:00:01.0: assign IRQ: got 0 [ 3.931060] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 3.937276] pcieport 0000:00:01.0: enabling bus mastering [ 3.937323] pcieport 0000:00:01.0: vgaarb: pci_notify [ 3.937389] pcieport 0000:00:02.0: vgaarb: pci_notify [ 3.937416] pcieport 0000:00:02.0: assign IRQ: got 0 [ 3.937433] pcieport 0000:00:02.0: enabling device (0140 -> 0142) [ 3.943672] pcieport 0000:00:02.0: enabling bus mastering [ 3.943710] pcieport 0000:00:02.0: vgaarb: pci_notify [ 3.943763] pci 0000:00:02.0: enabling bus mastering [ 3.945041] mv_xor d0060800.xor: Marvell shared XOR driver [ 4.010591] mv_xor d0060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.022071] mv_xor d0060900.xor: Marvell shared XOR driver [ 4.090756] mv_xor d0060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.394229] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.408932] printk: console [ttyS0] disabled [ 4.437812] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 31, base_baud = 12500000) is a 16550A [ 4.446992] printk: console [ttyS0] enabled [ 4.456039] printk: bootconsole [earlycon0] disabled [ 4.469038] ahci 0000:01:00.0: vgaarb: pci_notify [ 4.469361] ahci 0000:01:00.0: assign IRQ: got 32 [ 4.469398] ahci 0000:01:00.0: version 3.0 [ 4.469428] pci 0000:00:01.0: enabling bus mastering [ 4.469445] ahci 0000:01:00.0: enabling device (0146 -> 0147) [ 4.475700] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 4.486347] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 4.499282] scsi host0: ahci [ 4.504551] scsi host1: ahci [ 4.508243] ata1: SATA max UDMA/133 abar m512@0xf8010000 port 0xf8010100 irq 33 [ 4.517106] ata2: SATA max UDMA/133 abar m512@0xf8010000 port 0xf8010180 irq 33 [ 4.524858] ahci 0000:01:00.0: vgaarb: pci_notify [ 4.525937] sata_mv d00a0000.sata: version 1.28 [ 4.526257] sata_mv d00a0000.sata: slots 32 ports 1 [ 4.535907] scsi host2: sata_mv [ 4.540496] ata3: SATA max UDMA/133 irq 34 [ 4.547373] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 4.555291] nand: Hynix H27U1G8F2BTR-BC [ 4.559760] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 4.567826] Bad block table found at page 65472, version 0x01 [ 4.574248] Bad block table found at page 65408, version 0x01 [ 4.580446] nand_read_bbt: bad block at 0x000000f20000 [ 4.585832] nand_read_bbt: bad block at 0x000002da0000 [ 4.591408] 5 cmdlinepart partitions found on MTD device pxa3xx_nand-0 [ 4.598072] Creating 5 MTD partitions on "pxa3xx_nand-0": [ 4.603724] 0x000000000000-0x000000180000 : "u-boot" [ 4.611494] 0x000000180000-0x0000001a0000 : "u-boot-env" [ 4.620913] 0x000000200000-0x000000800000 : "uImage" [ 4.630003] 0x000000800000-0x000000c00000 : "minirootfs" [ 4.639609] 0x000000c00000-0x000008000000 : "ubifs" [ 4.650483] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 4.658361] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 4.708960] mvneta d0074000.ethernet eth0: Using random mac address 96:9a:b8:21:d0:e1 [ 4.723882] orion-ehci d0050000.usb: EHCI Host Controller [ 4.731252] orion-ehci d0050000.usb: new USB bus registered, assigned bus number 1 [ 4.739062] orion-ehci d0050000.usb: irq 37, io mem 0xd0050000 [ 4.769193] orion-ehci d0050000.usb: USB 2.0 started, EHCI 1.00 [ 4.775648] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 4.783987] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.791334] usb usb1: Product: EHCI Host Controller [ 4.796506] usb usb1: Manufacturer: Linux 6.1.8-mvebu-370xp-tld-1 ehci_hcd [ 4.803550] usb usb1: SerialNumber: d0050000.usb [ 4.809720] hub 1-0:1.0: USB hub found [ 4.814620] hub 1-0:1.0: 1 port detected [ 4.820815] usbcore: registered new interface driver usblp [ 4.828467] usbcore: registered new interface driver usb-storage [ 4.835979] mousedev: PS/2 mouse device common for all mice [ 4.844510] i2c_dev: i2c /dev entries driver [ 4.856656] rtc-ds1307 0-0068: 'wakeup-source' is set, request for an IRQ is disabled! [ 4.870323] rtc-ds1307 0-0068: registered as rtc0 [ 4.876785] rtc-ds1307 0-0068: setting system clock to 2023-01-27T18:51:33 UTC (1674845493) [ 4.911327] orion_wdt: Initial timeout 229 sec [ 4.919073] device-mapper: uevent: version 1.0.3 [ 4.924937] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 4.934283] device-mapper: multipath round-robin: version 1.2.0 loaded [ 4.941193] device-mapper: multipath queue-length: version 0.2.0 loaded [ 4.947939] device-mapper: multipath service-time: version 0.3.0 loaded [ 4.954815] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 4.961130] device-mapper: raid: Loading target version 1.15.1 [ 4.975031] marvell-cesa d0090000.crypto: CESA device successfully registered [ 4.983156] hid: raw HID events driver (C) Jiri Kosina [ 4.990697] usbcore: registered new interface driver usbhid [ 4.996491] usbhid: USB HID core driver [ 5.002717] drop_monitor: Initializing network drop monitor service [ 5.010719] NET: Registered PF_INET6 protocol family [ 5.017595] Segment Routing with IPv6 [ 5.021789] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.028181] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.034719] RPL Segment Routing with IPv6 [ 5.039242] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 5.045969] ata2.00: supports DRM functions and may not be fully accessible [ 5.053290] In-situ OAM (IOAM) with IPv6 [ 5.057707] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.063994] ata3.00: ATA-9: SAMSUNG MZ7TE128HMGR-000L1, EXT06L0Q, max UDMA/133 [ 5.071331] ata2.00: ATA-10: KINGSTON SKC6001024G, S4500104, max UDMA/133 [ 5.078278] ata1.00: ATA-11: WDC WDS100T2B0A-00SM50, 401020WD, max UDMA/133 [ 5.085444] ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 5.095672] NET: Registered PF_PACKET protocol family [ 5.101145] ata2.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 5.108155] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 5.116099] 8021q: 802.1Q VLAN Support v1.8 [ 5.121097] ata3.00: Features: Dev-Sleep [ 5.125810] Key type dns_resolver registered [ 5.131016] ata2.00: Features: Trust Dev-Sleep [ 5.135915] ata3.00: configured for UDMA/133 [ 5.140787] ThumbEE CPU extension supported. [ 5.145378] Registering SWP/SWPB emulation handler [ 5.150596] ata1.00: Features: Dev-Sleep [ 5.154984] ata2.00: supports DRM functions and may not be fully accessible [ 5.162792] registered taskstats version 1 [ 5.167238] Loading compiled-in X.509 certificates [ 5.173864] ata2.00: configured for UDMA/133 [ 5.178530] zswap: loaded using pool lzo/zbud [ 5.183765] ata1.00: configured for UDMA/133 [ 5.188678] Key type .fscrypt registered [ 5.193050] Key type fscrypt-provisioning registered [ 5.198816] scsi 0:0:0:0: Direct-Access ATA WDC WDS100T2B0A 20WD PQ: 0 ANSI: 5 [ 5.207079] Key type big_key registered [ 5.220479] scsi 1:0:0:0: Direct-Access ATA KINGSTON SKC6001 0104 PQ: 0 ANSI: 5 [ 5.229959] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.237718] sd 0:0:0:0: [sda] Write Protect is off [ 5.250178] sd 1:0:0:0: [sdb] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB) [ 5.257902] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 5.264330] scsi 2:0:0:0: Direct-Access ATA SAMSUNG MZ7TE128 6L0Q PQ: 0 ANSI: 5 [ 5.278282] sd 2:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 5.286710] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.286839] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.309405] sd 1:0:0:0: [sdb] Write Protect is off [ 5.314497] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.314574] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.323677] sd 2:0:0:0: [sdc] Write Protect is off [ 5.328744] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.328816] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.338101] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.349359] sda: sda1 [ 5.353036] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 5.359739] Key type encrypted registered [ 5.364481] sd 2:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 5.371711] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.383018] sdb: sdb1 [ 5.388524] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 5.394587] sdc: sdc1 [ 5.399066] sd 2:0:0:0: [sdc] Attached SCSI disk [ 5.416438] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.428757] Freeing unused kernel image (initmem) memory: 1024K [ 5.451222] Checked W+X mappings: passed, no W+X pages found [ 5.457124] Run /init as init process [ 5.461228] with arguments: [ 5.461240] /init [ 5.461247] with environment: [ 5.461254] HOME=/ [ 5.461260] TERM=linux [ 5.461266] reason=normal [ 5.461273] bdtype=rn102 [ 7.037294] mtdblock: MTD device 'u-boot' is NAND, please consider using UBI block devices instead. [ 7.059959] mtdblock: MTD device 'u-boot-env' is NAND, please consider using UBI block devices instead. [ 7.082471] mtdblock: MTD device 'uImage' is NAND, please consider using UBI block devices instead. [ 7.097156] mtdblock: MTD device 'minirootfs' is NAND, please consider using UBI block devices instead. [ 7.118755] mtdblock: MTD device 'ubifs' is NAND, please consider using UBI block devices instead. [ 7.210571] xhci_hcd 0000:02:00.0: vgaarb: pci_notify [ 7.210724] xhci_hcd 0000:02:00.0: assign IRQ: got 43 [ 7.210813] xhci_hcd 0000:02:00.0: enabling bus mastering [ 7.210831] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 7.216323] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 7.349380] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010 [ 7.358477] xhci_hcd 0000:02:00.0: enabling Mem-Wr-Inval [ 7.428386] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 7.467505] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 [ 7.509533] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 7.554478] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 7.607481] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.646652] usb usb2: Product: xHCI Host Controller [ 7.678444] usb usb2: Manufacturer: Linux 6.1.8-mvebu-370xp-tld-1 xhci-hcd [ 7.720915] usb usb2: SerialNumber: 0000:02:00.0 [ 7.748239] hub 2-0:1.0: USB hub found [ 7.769349] hub 2-0:1.0: 2 ports detected [ 7.801455] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 7.856533] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 7.903626] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.952531] usb usb3: Product: xHCI Host Controller [ 7.957698] usb usb3: Manufacturer: Linux 6.1.8-mvebu-370xp-tld-1 xhci-hcd [ 8.017989] usb usb3: SerialNumber: 0000:02:00.0 [ 8.057997] md/raid1:md0: active with 2 out of 2 mirrors [ 8.068663] hub 3-0:1.0: USB hub found [ 8.094726] hub 3-0:1.0: 2 ports detected [ 8.109852] md0: detected capacity change from 0 to 1953260928 [ 8.125017] xhci_hcd 0000:02:00.0: vgaarb: pci_notify [ 19.654943] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem [ 19.723221] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Quota mode: none. [ 23.190159] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.198334] mtdblock: MTD device 'u-boot' is NAND, please consider using UBI block devices instead. [ 23.209026] mtdblock: MTD device 'u-boot-env' is NAND, please consider using UBI block devices instead. [ 23.240711] mtdblock: MTD device 'uImage' is NAND, please consider using UBI block devices instead. [ 23.267171] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 23.313658] mtdblock: MTD device 'minirootfs' is NAND, please consider using UBI block devices instead. [ 23.328726] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 23.344448] mtdblock: MTD device 'ubifs' is NAND, please consider using UBI block devices instead. [ 26.550344] EXT4-fs (sdc1): re-mounted. Quota mode: none. [ 30.941833] EXT4-fs (md0): mounted filesystem with ordered data mode. Quota mode: none. [ 33.759178] random: crng init done [ 34.096452] mvneta d0074000.ethernet eth0: PHY [d0072004.mdio-mii:00] driver [Marvell 88E1318S] (irq=POLL) [ 34.116968] mvneta d0074000.ethernet eth0: configuring for phy/rgmii-id link mode [ 37.219680] mvneta d0074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 37.228797] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 47.476509] Setting Persistent MAC address to 01:23:45:67:89:ab [ 48.716304] mvneta d0074000.ethernet eth0: Link is Down [ 48.935278] mvneta d0074000.ethernet eth0: PHY [d0072004.mdio-mii:00] driver [Marvell 88E1318S] (irq=POLL) [ 48.945335] mvneta d0074000.ethernet eth0: configuring for phy/rgmii-id link mode [ 52.100306] mvneta d0074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 52.108383] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 53.859221] Adding 2097148k swap on /swapfile. Priority:-2 extents:297 across:88092812k SSFS