jasper@jasper-B202:~/Downloads$ sudo kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.pogo_v4.mtd0.kwb -p [sudo] password for jasper: Sending boot message. Please reboot the target...| Sending boot image... 0 % [......................................................................] 1 % [......................................................................] 3 % [......................................................................] 5 % [......................................................................] 6 % [......................................................................] 8 % [......................................................................] 10 % [......................................................................] 11 % [......................................................................] 13 % [......................................................................] 15 % [......................................................................] 17 % [......................................................................] 18 % [......................................................................] 20 % [......................................................................] 22 % [......................................................................] 23 % [......................................................................] 25 % [......................................................................] 27 % [......................................................................] 29 % [......................................................................] 30 % [......................................................................] 32 % [......................................................................] 34 % [......................................................................] 35 % [......................................................................] 37 % [......................................................................] 39 % [......................................................................] 41 % [......................................................................] 42 % [......................................................................] 44 % [......................................................................] 46 % [......................................................................] 47 % [......................................................................] 49 % [......................................................................] 51 % [......................................................................] 53 % [......................................................................] 54 % [......................................................................] 56 % [......................................................................] 58 % [......................................................................] 59 % [......................................................................] 61 % [......................................................................] 63 % [......................................................................] 64 % [......................................................................] 66 % [......................................................................] 68 % [......................................................................] 70 % [......................................................................] 71 % [......................................................................] 73 % [......................................................................] 75 % [......................................................................] 76 % [......................................................................] 78 % [......................................................................] 80 % [......................................................................] 82 % [......................................................................] 83 % [......................................................................] 85 % [......................................................................] 87 % [......................................................................] 88 % [......................................................................] 90 % [......................................................................] 92 % [......................................................................] 94 % [......................................................................] 95 % [......................................................................] 97 % [......................................................................] 99 % [....................................] [Type Ctrl-\ + c to quit]  U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700) Pogoplug V4 SoC: Kirkwood 88F6192_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 128 MiB MMC: MVEBU_MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Reset IDE: ide_preinit failed MMC rescan: current device # 0 initialized OK ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** Bad device usb 0 ** no IDE devices available Partition Map for MMC device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 8192 62325760 00000000-01 0c loading envs from mmc 0 ... ** File not found /boot/uEnv.txt ** running scan_disk ... Scan device usb device usb 0:1 ** Bad device usb 0 ** device usb 1:1 ** Bad device usb 1 ** device usb 2:1 ** Bad device usb 2 ** device usb 3:1 ** Bad device usb 3 ** Scan device ide Reset IDE: ide_preinit failed device ide 0:1 ** Bad device ide 0 ** device ide 1:1 ** Bad device ide 1 ** device ide 2:1 ** Bad device ide 2 ** device ide 3:1 ** Bad device ide 3 ** Scan device mmc MMC rescan: current device # 0 initialized OK device mmc 0:1 1 bytes read in 10 ms (0 Bytes/s) Found bootable drive on mmc 0 loading uImage ... 3831876 bytes read in 113 ms (32.3 MiB/s) loading uInitrd ... 7245696 bytes read in 200 ms (34.5 MiB/s) loading DTB /boot/dts/kirkwood-pogoplug_v4 ... ** File not found /boot/dts/kirkwood-pogoplug_v4 ** ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-4.12.1-kirkwood-tld-1 Created: 2018-09-14 8:56:13 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3831812 Bytes = 3.7 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-4.12.1-kirkwood-tld-1 Created: 2017-07-24 0:18:23 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7245632 Bytes = 6.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK Loading Ramdisk to 07420000, end 07b08f40 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.12.1-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Pogoplug v4 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 109432K/131072K available (8192K kernel code, 716K rwdata, 1972K rodata, 1024K init, 288K bss, 21640K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0900000 (9184 kB) [ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB) [ 0.000000] .data : 0xc0d00000 - 0xc0db3274 ( 717 kB) [ 0.000000] .bss : 0xc0db9b9c - 0xc0e01e60 ( 289 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000012] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000066] Switching to timer-based delay loop, resolution 6ns [ 0.000770] Console: colour dummy device 80x30 [ 0.000822] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.000857] pid_max: default: 32768 minimum: 301 [ 0.001150] Security Framework initialized [ 0.001338] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001365] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002652] CPU: Testing write buffer coherency: ok [ 0.004216] Setting up static identity map for 0x100000 - 0x100058 [ 0.004613] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.009588] devtmpfs: initialized [ 0.015457] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.015498] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.016116] prandom: seed boundary self test passed [ 0.021849] prandom: 100 self tests passed [ 0.021876] pinctrl core: initialized pinctrl subsystem [ 0.023622] NET: Registered protocol family 16 [ 0.024370] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.026728] cpuidle: using governor ladder [ 0.026839] cpuidle: using governor menu [ 0.027484] Feroceon L2: Enabling L2 [ 0.027549] Feroceon L2: Cache support initialised. [ 0.028098] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.035128] No ATAGs? [ 0.048411] vgaarb: loaded [ 0.048876] SCSI subsystem initialized [ 0.049540] usbcore: registered new interface driver usbfs [ 0.049665] usbcore: registered new interface driver hub [ 0.049787] usbcore: registered new device driver usb [ 0.051456] clocksource: Switched to clocksource orion_clocksource [ 0.183832] VFS: Disk quotas dquot_6.6.0 [ 0.183951] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.198871] NET: Registered protocol family 2 [ 0.199933] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.199976] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.200007] TCP: Hash tables configured (established 1024 bind 1024) [ 0.200137] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.200172] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.200422] NET: Registered protocol family 1 [ 0.201015] RPC: Registered named UNIX socket transport module. [ 0.201032] RPC: Registered udp transport module. [ 0.201043] RPC: Registered tcp transport module. [ 0.201053] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.201390] Unpacking initramfs... [ 1.168443] Freeing initrd memory: 7076K [ 1.168648] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.170020] audit: initializing netlink subsys (disabled) [ 1.170722] Initialise system trusted keyrings [ 1.170796] Key type blacklist registered [ 1.170923] audit: type=2000 audit(1.168:1): state=initialized audit_enabled=0 res=1 [ 1.171057] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 1.171156] zbud: loaded [ 1.172685] NFS: Registering the id_resolver key type [ 1.172725] Key type id_resolver registered [ 1.172738] Key type id_legacy registered [ 1.172763] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.172777] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.173063] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.173344] fuse init (API version 7.26) [ 1.173859] orangefs_debugfs_init: called with debug mask: :none: :0: [ 1.174257] orangefs_init: module version upstream loaded [ 1.174273] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2.551464] random: fast init done [ 9.945162] Key type asymmetric registered [ 9.945187] Asymmetric key parser 'x509' registered [ 9.945287] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 9.945303] io scheduler noop registered [ 9.945315] io scheduler deadline registered [ 9.945432] io scheduler cfq registered (default) [ 9.946686] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 47 [ 9.946711] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 49 [ 9.947209] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 9.950009] mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00 [ 9.950041] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 9.950060] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 9.950081] pci_bus 0000:00: root bus resource [bus 00-ff] [ 9.950557] PCI: bus0: Fast back to back transfers disabled [ 9.950593] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 9.971558] PCI: bus1: Fast back to back transfers disabled [ 9.971852] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] [ 9.971882] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit] [ 9.971916] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0010000-0xe0010fff 64bit] [ 9.971948] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0011000-0xe0011fff 64bit] [ 9.971976] pci 0000:00:01.0: PCI bridge to [bus 01] [ 9.972001] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 9.972130] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 9.972268] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 9.972993] mv_xor f1060800.xor: Marvell shared XOR driver [ 10.032591] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr ) [ 10.032906] mv_xor f1060900.xor: Marvell shared XOR driver [ 10.092601] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr ) [ 10.093228] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 10.095143] console [ttyS0] disabled [ 10.095233] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a 16550A [ 10.803276] console [ttyS0] enabled [ 10.819195] loop: module loaded [ 10.823232] sata_mv f1080000.sata: slots 32 ports 2 [ 10.832045] scsi host0: sata_mv [ 10.835818] scsi host1: sata_mv [ 10.839279] ata1: SATA max UDMA/133 irq 32 [ 10.843435] ata2: SATA max UDMA/133 irq 32 [ 10.848787] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 10.855227] nand: Hynix H27U1G8F2BTR-BC [ 10.859057] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 10.866640] Scanning device for bad blocks [ 10.955550] 5 cmdlinepart partitions found on MTD device orion_nand [ 10.961819] Creating 5 MTD partitions on "orion_nand": [ 10.966950] 0x000000000000-0x000000200000 : "u-boot" [ 10.973774] 0x000000200000-0x000000500000 : "uImage" [ 10.980526] 0x000000500000-0x000000800000 : "uImage2" [ 10.987460] 0x000000800000-0x000001000000 : "failsafe" [ 10.994597] 0x000001000000-0x000008000000 : "root" [ 11.003739] libphy: Fixed MDIO Bus: probed [ 11.008950] libphy: orion_mdio_bus: probed [ 11.020311] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 11.173100] ata1: SATA link down (SStatus 0 SControl F300) [ 11.522986] ata2: SATA link down (SStatus 0 SControl F300) [ 12.133583] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 52:3b:20:9c:11:51 [ 12.142481] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.149009] ehci-pci: EHCI PCI platform driver [ 12.153559] ehci-orion: EHCI orion driver [ 12.157848] orion-ehci f1050000.ehci: EHCI Host Controller [ 12.163396] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 12.171267] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 12.201503] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 12.207827] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 12.214635] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.221853] usb usb1: Product: EHCI Host Controller [ 12.226716] usb usb1: Manufacturer: Linux 4.12.1-kirkwood-tld-1 ehci_hcd [ 12.233421] usb usb1: SerialNumber: f1050000.ehci [ 12.239087] hub 1-0:1.0: USB hub found [ 12.242980] hub 1-0:1.0: 1 port detected [ 12.247760] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 12.253115] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 12.262114] xhci_hcd 0000:01:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010 [ 12.270838] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 12.277649] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.284873] usb usb2: Product: xHCI Host Controller [ 12.289737] usb usb2: Manufacturer: Linux 4.12.1-kirkwood-tld-1 xhci-hcd [ 12.296442] usb usb2: SerialNumber: 0000:01:00.0 [ 12.302045] hub 2-0:1.0: USB hub found [ 12.305841] hub 2-0:1.0: 2 ports detected [ 12.310578] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 12.315888] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 12.323432] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 12.331744] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 12.338512] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.345740] usb usb3: Product: xHCI Host Controller [ 12.350606] usb usb3: Manufacturer: Linux 4.12.1-kirkwood-tld-1 xhci-hcd [ 12.358159] usb usb3: SerialNumber: 0000:01:00.0 [ 12.363748] hub 3-0:1.0: USB hub found [ 12.367535] hub 3-0:1.0: 2 ports detected [ 12.372685] usbcore: registered new interface driver usb-storage [ 12.379170] mousedev: PS/2 mouse device common for all mice [ 13.441505] rtc-mv f1010300.rtc: internal RTC not ticking [ 13.447158] i2c /dev entries driver [ 13.452768] hidraw: raw HID events driver (C) Jiri Kosina [ 13.458698] drop_monitor: Initializing network drop monitor service [ 13.465350] NET: Registered protocol family 17 [ 13.469885] Key type dns_resolver registered [ 13.475324] registered taskstats version 1 [ 13.479411] Loading compiled-in X.509 certificates [ 13.484321] zswap: loaded using pool lzo/zbud [ 13.503281] Key type big_key registered [ 13.520742] Key type encrypted registered [ 13.526949] hctosys: unable to open rtc device (rtc0) [ 13.537029] Freeing unused kernel memory: 1024K Loading, please wait... starting version 232 [ 14.220066] mvsdio f1090000.mvsdio: Got CD GPIO [ 14.350559] mmc0: host does not support reading read-only switch, assuming write-enable [ 14.371109] mmc0: new high speed SDHC card at address aaaa [ 14.596828] mmcblk0: mmc0:aaaa SB32G 29.7 GiB [ 14.608348] mmcblk0: p1 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Warning: fsck not present, so skipping root file system [ 24.961951] EXT4-fs (mmcblk0p1): INFO: recovery required on readonly filesystem [ 24.969249] EXT4-fs (mmcblk0p1): write access will be enabled during recovery [ 25.096118] EXT4-fs (mmcblk0p1): recovery complete [ 25.115518] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [ ok ] Setting hostname to 'debian'...done. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232 . ok [....] Synthesizing the initial hotplug events...[ 27.676539] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ ok done. [....] Waiting for /dev to be fully populated...[ 28.161290] orion_wdt: Initial timeout 25 sec [ 28.277200] marvell-cesa f1030000.crypto: CESA device successfully registered done. [ ok ] Activating swap:. [ 29.803569] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Will now check root file system:fsck from util-linux 2.29.2 [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -y -C0 /dev/mmcblk0p1 e2fsck 1.43.4 (31-Jan-2017) rootfs: clean, 14456/1949696 files, 287638/7790720 blocks . ok [ 30.203065] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro [ ok ] Will now activate lvm and md swap:done. [info] Will now check all file systems. fsck from util-linux 2.29.2 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs[ ok hat location is writable.. [ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done. [ ok . [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables...done. [ ok ] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/52:3b:20:9c:11:51 Sending on LPF/eth0/52:3b:20:9c:11:51 Sending on Socket/fallback DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67 [ 112.551935] NET: Registered protocol family 10 [ 112.560681] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 112.566881] Segment Routing with IPv6 DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67 DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 No DHCPOFFERS received. Trying recorded lease 192.168.0.14 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. --- 192.168.0.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. done. [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1311 (syslogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting NTP server: ntpd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1310 (klogd) . ok [ ok ] Starting OpenBSD Secure Shell server: sshd. [ ok ] Running local boot scripts (/etc/rc.local). Debian GNU/Linux 9 debian ttyS0 debian login: [ 165.201543] random: crng init done Debian GNU/Linux 9 debian ttyS0 debian login: