256 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) CLOUD ENGINES BOARD: DISCOVERY:0.1 Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME] Hit any key to stop autoboot: 0 NAND read: device 0 offset 0x100000, size 0x300000 Reading data from 0x3ff800 -- 100% complete. 3145728 bytes read: OK ## Booting image at 00800000 ... Image Name: Linux-2.6.22.18 Created: 2010-02-08 23:13:14 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1978884 Bytes = 1.9 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux............................................................................................................................ done, booting the kernel. [ 0.000000] Linux version 2.6.22.18 (bdietrich@brad-ux) (gcc version 4.2.1) #76 Mon Feb 8 15:13:08 PST 2010 [ 0.000000] CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] Machine: Feroceon-KW [ 0.000000] Using UBoot passing parameters structure [ 0.000000] CE: Received CE uboot parameters: [ 0.000000] CE: BOARDID: DISCOVERY:0.1 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU0: D VIVT write-back cache [ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] Built 1 zonelists. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 ro [ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes) [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB 0MB 0MB 0MB = 128MB total [ 0.000000] Memory: 125824KB available (3592K code, 253K data, 124K init) [ 0.240000] Mount-cache hash table entries: 512 [ 0.240000] CPU: Testing write buffer coherency: ok [ 0.240000] NET: Registered protocol family 16 [ 0.240000] [ 0.240000] CPU Interface [ 0.240000] ------------- [ 0.240000] SDRAM_CS0 ....base 00000000, size 128MB [ 0.240000] SDRAM_CS1 ....disable [ 0.240000] SDRAM_CS2 ....disable [ 0.240000] SDRAM_CS3 ....disable [ 0.240000] PEX0_MEM ....base e8000000, size 128MB [ 0.240000] PEX0_IO ....base f2000000, size 1MB [ 0.240000] INTER_REGS ....base f1000000, size 1MB [ 0.240000] NFLASH_CS ....base fa000000, size 2MB [ 0.240000] SPI_CS ....base f4000000, size 16MB [ 0.240000] BOOT_ROM_CS ....no such [ 0.240000] DEV_BOOTCS ....no such [ 0.240000] CRYPT_ENG ....base f0000000, size 2MB [ 0.240000] [ 0.240000] Marvell Development Board (LSP Version KW_LSP_4.2.7_patch21_with_rx_desc_tuned)-- SHEEVA PLUG Soc: 88F6281 A1 LE [ 0.240000] [ 0.240000] Detected Tclk 200000000 and SysClk 400000000 [ 0.240000] MV Buttons Device Load [ 0.240000] Marvell USB EHCI Host controller #0: c0539600 [ 0.740000] PEX0 interface detected no Link. [ 0.740000] PCI: bus0: Fast back to back transfers enabled [ 0.740000] SCSI subsystem initialized [ 0.740000] usbcore: registered new interface driver usbfs [ 0.740000] usbcore: registered new interface driver hub [ 0.740000] usbcore: registered new device driver usb [ 0.740000] NET: Registered protocol family 2 [ 0.750000] Time: kw_clocksource clocksource has been installed. [ 0.840000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.840000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.840000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.840000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.840000] TCP reno registered [ 0.870000] RTC has been updated!!! [ 0.870000] RTC registered [ 0.870000] Use the XOR engines (acceleration) for enhancing the following functions: [ 0.870000] o RAID 5 Xor calculation [ 0.870000] o kernel memcpy [ 0.870000] o kenrel memzero [ 0.870000] Number of XOR engines to use: 4 [ 0.870000] cesadev_init(c00117b0) [ 0.870000] mvCesaInit: sessions=640, queue=64, pSram=f0000000 [ 0.870000] MV Buttons Driver Load [ 0.870000] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 0.870000] squashfs: LZMA suppport for slax.org by jro [ 0.870000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.870000] io scheduler noop registered [ 0.870000] io scheduler anticipatory registered (default) [ 0.880000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 0.890000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 0.910000] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize [ 0.910000] Loading Marvell Ethernet Driver: [ 0.920000] o Cached descriptors in DRAM [ 0.920000] o DRAM SW cache-coherency [ 0.930000] o Single RX Queue support - ETH_DEF_RXQ=0 [ 0.930000] o Single TX Queue support - ETH_DEF_TXQ=0 [ 0.940000] o TCP segmentation offload enabled [ 0.940000] o Receive checksum offload enabled [ 0.950000] o Transmit checksum offload enabled [ 0.950000] o Network Fast Processing (Routing) supported [ 0.960000] o Driver ERROR statistics enabled [ 0.960000] o Driver INFO statistics enabled [ 0.970000] o Proc tool API enabled [ 0.970000] o Rx descripors: q0=128 [ 0.970000] o Tx descripors: q0=532 [ 0.980000] o Loading network interface(s): [ 0.980000] o eth0, ifindex = 1, GbE port = 0 [ 0.990000] [ 0.990000] Warning: Giga 1 is Powered Off [ 0.990000] [ 0.990000] mvFpRuleDb (c7f15000): 1024 entries, 4096 bytes [ 1.000000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 1.010000] Copyright (c) 1999-2006 Intel Corporation. [ 1.010000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 1.020000] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.020000] Integrated Sata device found [ 1.050000] scsi0 : Marvell SCSI to SATA adapter [ 1.050000] scsi1 : Marvell SCSI to SATA adapter [ 1.570000] scsi 0:0:0:0: Direct-Access ATA TS32GSSD25S-M 1010 PQ: 0 ANSI: 5 [ 1.580000] sd 0:0:0:0: [sda] 62533296 512-byte hardware sectors (32017 MB) [ 1.580000] sd 0:0:0:0: [sda] Write Protect is off [ 1.590000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.600000] sd 0:0:0:0: [sda] 62533296 512-byte hardware sectors (32017 MB) [ 1.610000] sd 0:0:0:0: [sda] Write Protect is off [ 1.610000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.620000] sda: sda1 sda2 [ 1.620000] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.630000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.630000] NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ [ 1.640000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) [ 1.650000] Scanning device for bad blocks [ 1.740000] Using static partition definition [ 1.740000] Creating 4 MTD partitions on "nand_mtd": [ 1.750000] 0x00000000-0x00100000 : "u-boot" [ 1.750000] 0x00100000-0x00500000 : "uImage" [ 1.760000] 0x00500000-0x02500000 : "root" [ 1.760000] 0x02500000-0x10000000 : "data" [ 1.770000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI [ 1.770000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 [ 1.810000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 [ 1.830000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.830000] usb usb1: configuration #1 chosen from 1 choice [ 1.840000] hub 1-0:1.0: USB hub found [ 1.840000] hub 1-0:1.0: 1 port detected [ 1.960000] USB Universal Host Controller Interface driver v3.0 [ 2.240000] usb 1-1: new high speed USB device using ehci_marvell and address 2 [ 2.390000] usb 1-1: configuration #1 chosen from 1 choice [ 2.390000] usbcore: registered new interface driver usblp [ 2.400000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 2.410000] Initializing USB Mass Storage driver... [ 2.410000] scsi2 : SCSI emulation for USB Mass Storage devices [ 2.420000] usbcore: registered new interface driver usb-storage [ 2.420000] USB Mass Storage support registered. [ 2.430000] mice: PS/2 mouse device common for all mice [ 2.430000] i2c /dev entries driver [ 2.440000] Linux telephony interface: v1.00 [ 2.440000] md: linear personality registered for level -1 [ 2.450000] md: raid0 personality registered for level 0 [ 2.450000] md: raid1 personality registered for level 1 [ 2.630000] raid6: int32x1 98 MB/s [ 2.800000] raid6: int32x2 114 MB/s [ 2.970000] raid6: int32x4 122 MB/s [ 3.140000] raid6: int32x8 110 MB/s [ 3.140000] raid6: using algorithm int32x4 (122 MB/s) [ 3.140000] md: raid6 personality registered for level 6 [ 3.150000] md: raid5 personality registered for level 5 [ 3.150000] md: raid4 personality registered for level 4 [ 3.160000] raid5: measuring checksumming speed [ 3.210000] arm4regs : 1084.400 MB/sec [ 3.260000] 8regs : 755.200 MB/sec [ 3.310000] 32regs : 900.000 MB/sec [ 3.310000] raid5: using function: arm4regs (1084.400 MB/sec) [ 3.320000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 3.320000] dm_crypt using the OCF package. [ 3.330000] sdhci: Secure Digital Host Controller Interface driver [ 3.330000] sdhci: Copyright(c) Pierre Ossman [ 3.340000] usbcore: registered new interface driver usbhid [ 3.340000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 3.350000] TCP cubic registered [ 3.350000] NET: Registered protocol family 1 [ 3.360000] NET: Registered protocol family 17 [ 3.360000] md: Autodetecting RAID arrays. [ 3.370000] md: autorun ... [ 3.370000] md: ... autorun DONE. [ 6.530000] Empty flash at 0x00e55270 ends at 0x00e55800 [ 6.630000] VFS: Mounted root (jffs2 filesystem) readonly. [ 6.640000] Freeing init memory: 124K [ 7.640000] scsi 2:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 init started: BusyBox v1.7.0 (2008-02-26 19:25:17 IST) starting pid 283, tty '': '/etc/init.d/rcS' [ 8.130000] eth0: link down [ 8.130000] eth0: started udhcpc (v1.7.0) started HWADDR 00 0x10 0x75 0x26 0x72 0x86 PIP0 114 PIP1 134 Sending discover... [ 8.450000] sd 2:0:0:0: [sdb] 15661056 512-byte hardware sectors (8018 MB) [ 8.460000] sd 2:0:0:0: [sdb] Write Protect is off [ 8.460000] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 8.470000] sd 2:0:0:0: [sdb] 15661056 512-byte hardware sectors (8018 MB) [ 8.480000] sd 2:0:0:0: [sdb] Write Protect is off [ 8.480000] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 8.490000] sdb: sdb1 [ 8.490000] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 8.500000] sd 2:0:0:0: Attached scsi generic sg1 type 0 Sending discover... [ 11.880000] eth0: link up, full duplex, speed 1 Gbps Sending discover... Sending select for 192.168.1.39... Lease of 192.168.1.39 obtained, lease time 86400 HWADDR 00 0x10 0x75 0x26 0x72 0x86 PIP0 114 PIP1 134 eth0 Link encap:Ethernet HWaddr 00:10:75:26:72:86 inet addr:192.168.1.39 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:532 RX bytes:702 (702.0 B) TX bytes:1180 (1.1 KiB) Interrupt:11 eth0:0 Link encap:Ethernet HWaddr 00:10:75:26:72:86 inet addr:169.254.114.134 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:11 Loading fs modules: [ 14.900000] fuse init (API version 7.8) Success [ 15.180000] ufsd: module license 'Commercial product' taints kernel. [ 15.350000] ufsd: driver 8.1 (011_A) LBD=ON with ioctl loaded at bf040000 [ 15.350000] NTFS read/write support included [ 15.350000] Hfs+/HfsX read/write support included Loading tun.ko: [ 15.370000] tun: Universal TUN/TAP device driver, 1.6 [ 15.380000] tun: (C) 1999-2004 Max Krasnyansky Success Loading xce.ko: [ 15.400000] Cloud Engines XCE Init [Version: 2.0.5.10] [ 15.410000] XCE: CPU MEMORY MAP: [ 15.410000] XCE: -- 0x00001000 - 0xbeffffff (3055 MB) User Space Mappings [ 15.420000] XCE: -- 0xbf000000 - 0xbfffffff ( 16 MB) Kernel module space [ 15.430000] XCE: -- 0xc0000000 - 0xc7ffffff ( 128 MB) Kernel direct-mapped ram [ 15.430000] XCE: -- 0xc8800000 - 0xe7ffffff ( 504 MB) Kernel vmalloc space [ 15.440000] XCE: -- 0xe8000000 - 0xfeffffff ( 367 MB) Kernel platform space [ 15.450000] XCE: CPU FEATURES: [ 15.450000] XCE: -- I Cache: enabled [ 15.460000] XCE: -- D Cache: enabled [ 15.460000] XCE: -- Branch Predict: disabled [ 15.470000] XCE: -- MMU: enabled [ 15.470000] XCE: -- Alignment Abort: enabled [ 15.470000] XCE: -- ICache Prefetch: enabled [ 15.480000] XCE: -- DCache Prefetch: enabled [ 15.480000] XCE: -- L2 Cache: enabled [ 15.490000] XCE: -- L2 Prefetch: disabled [ 15.490000] XCE: -- L2 Writethrough: disabled [ 15.500000] XCE: -- Write Allocate: disabled [ 15.500000] XCE: -- Streaming: disabled [ 15.510000] XCE: BLPARAMS: reading 2048 bytes @ a0000 [ 15.510000] XCE: Loaded Property Size: 2048 [ 15.520000] XCE: - 'cesvcid' -> 'LPWSPJGZQKT9FGCCKZUHSCTRP6' [ 15.520000] XCE: - 'ceserialno' -> 'NA1Y0SXE' [ 15.530000] XCE: - 'ceboardver' -> 'DISCOVERY:0.1' [ 15.530000] XCE: Current GPIO State: [ 15.540000] XCE: GPIO L OUT: 0xeff00000 [ 15.540000] XCE: GPIO L OE: 0xffffffff [ 15.540000] XCE: GPIO L BLINK: 0x00000000 [ 15.550000] XCE: GPIO L POL: 0x00000000 [ 15.550000] XCE: GPIO L IN: 0xfff00080 [ 15.560000] XCE: GPIO H OUT: 0xfffcc00f [ 15.560000] XCE: GPIO H OE: 0xfffc000f [ 15.570000] XCE: GPIO H BLINK: 0x00000000 [ 15.570000] XCE: GPIO H POL: 0x00000000 [ 15.570000] XCE: GPIO H IN: 0x0000c00d [ 15.580000] XCE: Kernel thread starting PID: 355 Success Starting hbplug: Success starting pid 357, tty '': '/bin/sh' -sh-3.2# [ 16.450000] XCE: BLPARAMS: reading 2048 bytes @ a0000 [ 16.450000] XCE: BLPARAMS: reading 2048 bytes @ a0800 [ 16.460000] XCE: BLPARAMS: reading 2048 bytes @ a1000 [ 16.460000] XCE: BLPARAMS: reading 2048 bytes @ a1800 [ 21.790000] XCE: XCE: LED -> CONNECTED [ 21.800000] kjournald starting. Commit interval 5 seconds [ 21.800000] EXT3 FS on sda1, internal journal [ 21.810000] EXT3-fs: mounted filesystem with ordered data mode. [ 31.810000] XCE: XCE: LED -> MESSAGE -sh-3.2# uname -a Linux Pogoplug 2.6.22.18 #76 Mon Feb 8 15:13:08 PST 2010 armv5tejl unknown -sh-3.2# cd /tmp/ ] 41 --.-K/s in 0s 2000-01-01 00:01:18 (4.52 MB/s) - `/tmp/tools/e2fsck.md5' saved [41/41] --2000-01-01 00:01:18-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/e2fsck Resolving dl.dropboxusercontent.com... 108.160.172.5 Connecting to dl.dropboxusercontent.com|108.160.172.5|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 787036 (769K) [application/octet-stream] Saving to: `/tmp/tools/e2fsck' 100%[======================================>] 787,036 626K/s in 1.2s 2000-01-01 00:01:21 (626 KB/s) - `/tmp/tools/e2fsck' saved [787036/787036] verify file /tmp/tools/e2fsck with md5 /tmp/tools/e2fsck.md5 ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cat: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cut: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: md5sum: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: cut: command not found passed ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 195: rm: command not found chmodding 755 -- /tmp/tools/e2fsck ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 246: chmod: command not found # Successfully installed /tmp/tools/e2fsck. # Installing /tmp/tools/mke2fs... /tmp/tools/mke2fs https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/mke2fs https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/mke2fs.md5 /tmp/tools/mke2fs.md5 --2000-01-01 00:01:21-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/mke2fs.md5 Resolving dl.dropboxusercontent.com... 45.58.69.37 Connecting to dl.dropboxusercontent.com|45.58.69.37|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 41 [text/plain] Saving to: `/tmp/tools/mke2fs.md5' 100%[======================================>] 41 --.-K/s in 0s 2000-01-01 00:01:22 (4.42 MB/s) - `/tmp/tools/mke2fs.md5' saved [41/41] --2000-01-01 00:01:22-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/mke2fs Resolving dl.dropboxusercontent.com... 45.58.69.37 Connecting to dl.dropboxusercontent.com|45.58.69.37|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 403201 (394K) [application/octet-stream] Saving to: `/tmp/tools/mke2fs' 100%[======================================>] 403,201 449K/s in 0.9s 2000-01-01 00:01:24 (449 KB/s) - `/tmp/tools/mke2fs' saved [403201/403201] verify file /tmp/tools/mke2fs with md5 /tmp/tools/mke2fs.md5 ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cat: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cut: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: md5sum: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: cut: command not found passed ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 195: rm: command not found chmodding 755 -- /tmp/tools/mke2fs ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 246: chmod: command not found # Successfully installed /tmp/tools/mke2fs. # Installing /tmp/tools/nandwrite... /tmp/tools/nandwrite https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/nandwrite https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/nandwrite.md5 /tmp/tools/nandwrite.md5 --2000-01-01 00:01:24-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/nandwrite.md5 Resolving dl.dropboxusercontent.com... 45.58.69.37 Connecting to dl.dropboxusercontent.com|45.58.69.37|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 44 [text/plain] Saving to: `/tmp/tools/nandwrite.md5' 100%[======================================>] 44 --.-K/s in 0s 2000-01-01 00:01:25 (4.87 MB/s) - `/tmp/tools/nandwrite.md5' saved [44/44] --2000-01-01 00:01:25-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/nandwrite Resolving dl.dropboxusercontent.com... 45.58.69.37 Connecting to dl.dropboxusercontent.com|45.58.69.37|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 29644 (29K) [application/octet-stream] Saving to: `/tmp/tools/nandwrite' 100%[======================================>] 29,644 --.-K/s in 0.003s 2000-01-01 00:01:26 (9.58 MB/s) - `/tmp/tools/nandwrite' saved [29644/29644] verify file /tmp/tools/nandwrite with md5 /tmp/tools/nandwrite.md5 ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cat: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cut: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: md5sum: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: cut: command not found passed ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 195: rm: command not found chmodding 755 -- /tmp/tools/nandwrite ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 246: chmod: command not found # Successfully installed /tmp/tools/nandwrite. # Installing /tmp/tools/nanddump... /tmp/tools/nanddump https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/nanddump https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/nanddump.md5 /tmp/tools/nanddump.md5 --2000-01-01 00:01:26-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/nanddump.md5 Resolving dl.dropboxusercontent.com... 45.58.69.37 Connecting to dl.dropboxusercontent.com|45.58.69.37|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 43 [text/plain] Saving to: `/tmp/tools/nanddump.md5' 100%[======================================>] 43 --.-K/s in 0s 2000-01-01 00:01:27 (4.79 MB/s) - `/tmp/tools/nanddump.md5' saved [43/43] --2000-01-01 00:01:27-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/nanddump Resolving dl.dropboxusercontent.com... 45.58.69.37 Connecting to dl.dropboxusercontent.com|45.58.69.37|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 26548 (26K) [application/octet-stream] Saving to: `/tmp/tools/nanddump' 100%[======================================>] 26,548 --.-K/s in 0.002s 2000-01-01 00:01:28 (10.8 MB/s) - `/tmp/tools/nanddump' saved [26548/26548] verify file /tmp/tools/nanddump with md5 /tmp/tools/nanddump.md5 ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cat: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cut: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: md5sum: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: cut: command not found passed ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 195: rm: command not found chmodding 755 -- /tmp/tools/nanddump ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 246: chmod: command not found # Successfully installed /tmp/tools/nanddump. # Installing /tmp/tools/flash_erase... /tmp/tools/flash_erase https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/flash_erase https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/flash_erase.md5 /tmp/tools/flash_erase.md5 --2000-01-01 00:01:28-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/flash_erase.md5 Resolving dl.dropboxusercontent.com... 45.58.69.37 Connecting to dl.dropboxusercontent.com|45.58.69.37|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 46 [text/plain] Saving to: `/tmp/tools/flash_erase.md5' 100%[======================================>] 46 --.-K/s in 0s 2000-01-01 00:01:29 (5.05 MB/s) - `/tmp/tools/flash_erase.md5' saved [46/46] --2000-01-01 00:01:29-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/flash_erase Resolving dl.dropboxusercontent.com... 45.58.69.37 Connecting to dl.dropboxusercontent.com|45.58.69.37|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 25632 (25K) [application/octet-stream] Saving to: `/tmp/tools/flash_erase' 100%[======================================>] 25,632 --.-K/s in 0.002s 2000-01-01 00:01:30 (11.0 MB/s) - `/tmp/tools/flash_erase' saved [25632/25632] verify file /tmp/tools/flash_erase with md5 /tmp/tools/flash_erase.md5 ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cat: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cut: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: md5sum: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: cut: command not found passed ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 195: rm: command not found chmodding 755 -- /tmp/tools/flash_erase ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 246: chmod: command not found # Successfully installed /tmp/tools/flash_erase. # Installing /tmp/tools/fw_printenv... /tmp/tools/fw_printenv https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/fw_printenv https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/fw_printenv.md5 /tmp/tools/fw_printenv.md5 --2000-01-01 00:01:30-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/fw_printenv.md5 Resolving dl.dropboxusercontent.com... 45.58.69.37 Connecting to dl.dropboxusercontent.com|45.58.69.37|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 46 [text/plain] Saving to: `/tmp/tools/fw_printenv.md5' 100%[======================================>] 46 --.-K/s in 0s 2000-01-01 00:01:31 (5.12 MB/s) - `/tmp/tools/fw_printenv.md5' saved [46/46] --2000-01-01 00:01:31-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/fw_printenv Resolving dl.dropboxusercontent.com... 45.58.69.37 Connecting to dl.dropboxusercontent.com|45.58.69.37|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 668497 (653K) [text/plain] Saving to: `/tmp/tools/fw_printenv' 100%[======================================>] 668,497 521K/s in 1.3s 2000-01-01 00:01:33 (521 KB/s) - `/tmp/tools/fw_printenv' saved [668497/668497] verify file /tmp/tools/fw_printenv with md5 /tmp/tools/fw_printenv.md5 ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cat: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cut: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: md5sum: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: cut: command not found passed ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 195: rm: command not found chmodding 755 -- /tmp/tools/fw_printenv ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 246: chmod: command not found # Successfully installed /tmp/tools/fw_printenv. # Installing /tmp/tools/etc/fw_env.config... /tmp/tools/etc/fw_env.config https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/fw_env.config https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/fw_env.config.md5 /tmp/tools/etc/fw_env.config.md5 --2000-01-01 00:01:33-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/fw_env.config.md5 Resolving dl.dropboxusercontent.com... 45.58.69.37 Connecting to dl.dropboxusercontent.com|45.58.69.37|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 48 [text/plain] Saving to: `/tmp/tools/etc/fw_env.config.md5' 100%[======================================>] 48 --.-K/s in 0s 2000-01-01 00:01:34 (4.92 MB/s) - `/tmp/tools/etc/fw_env.config.md5' saved [48/48] --2000-01-01 00:01:34-- https://dl.dropboxusercontent.com/u/47541136/linux/tools_for_Kirkwood_installer/fw_env.config Resolving dl.dropboxusercontent.com... 45.58.69.37 Connecting to dl.dropboxusercontent.com|45.58.69.37|:443... connected. WARNING: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certs.godaddy.com/repository//CN=Go Daddy Secure Certificate Authority - G2': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 329 [text/plain] Saving to: `/tmp/tools/etc/fw_env.config' 100%[======================================>] 329 --.-K/s in 0s 2000-01-01 00:01:35 (30.9 MB/s) - `/tmp/tools/etc/fw_env.config' saved [329/329] verify file /tmp/tools/etc/fw_env.config with md5 /tmp/tools/etc/fw_env.config.md5 ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cat: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 122: cut: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: cut: command not found passed ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 195: rm: command not found chmodding 644 -- /tmp/tools/etc/fw_env.config ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 246: chmod: command not found # Successfully installed /tmp/tools/etc/fw_env.config. ######this is the output of normal fw_printenv ######this is the output of normal fw_printenv ######this is the output of normal fw_printenv ######this is the output of normal fw_printenv ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 1354: fw_printenv: command not found ######this is the output of chrooted fw_printenv ######this is the output of chrooted fw_printenv ######this is the output of chrooted fw_printenv ######this is the output of chrooted fw_printenv ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 529: mkdir: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 530: mount: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 532: mkdir: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 533: mount: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 535: mkdir: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 536: mount: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 540: chroot: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 543: umount: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 544: umount: command not found ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 545: umount: command not found Installation complete You can now reboot your device into Debian. If your device does not start Debian after rebooting, you may need to restart the device by disconnecting the power. The new root password is 'root' Please change it immediately after logging in. Reboot now? [Y/n] ./file.php?3,file=960,filename=kirkwood-installer-6.sh: line 126: md5sum: command not found