U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:27:19 -0700) Seagate GoFlex Net gcc (Debian 4.9.2-10) 4.9.2 GNU ld (GNU Binutils for Debian) 2.25 Hit any key to stop autoboot: 0 running scan_disk ... Scan device usb starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) 1 Storage Device(s) found device usb 0:1 1 bytes read in 231 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 3154896 bytes read in 394 ms (7.6 MiB/s) loading uInitrd ... 7179935 bytes read in 548 ms (12.5 MiB/s) loading DTB /boot/dts/kirkwood-goflexnet.dtb ... 11897 bytes read in 548 ms (20.5 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-4.4.0-kirkwood-tld-1 Created: 2016-02-19 5:55:25 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3154832 Bytes = 3 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-4.4.0-kirkwood-tld-1 Created: 2016-02-19 7:33:04 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7179871 Bytes = 6.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Starting kernel ...