Welcome! Log In Create A New Profile

Advanced

Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release

Posted by jeyrey 
Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 17, 2020 01:36AM
There is a driver available in the kernal 5.5.1 for the wifi adapter RTL8188EUS. This driver is not available in kernel 4.4.201 for Pogo V3 OXNAS. Could you please add it to the next release? Here are the outputs from dmesg from both machines.

On Pogo E02 kernel 5.5.1:

[15358.892485] usb 1-1.3: new high-speed USB device number 5 using orion-ehci
[15358.944087] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
[15358.953399] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15358.961579] usb 1-1.3: Product: 802.11n NIC
[15358.967434] usb 1-1.3: Manufacturer: Realtek
[15358.973096] usb 1-1.3: SerialNumber: 000B8195xxxx
[15359.210832] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[15359.739417] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[15359.747177] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[15359.757660] cfg80211: failed to load regulatory.db
[15359.769469] lib80211: common routines for IEEE802.11 drivers
[15359.776385] lib80211_crypt: registered algorithm 'NULL'
[15359.813976] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[15359.834811] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_UNKNOWN_CUT(10)_1T1R_RomVer(0)
[15359.887131] usbcore: registered new interface driver r8188eu
[15359.907465] systemd-udevd[2289]: Using default interface naming scheme 'v240'.
[15359.968467] systemd-udevd[2289]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[15359.981080] r8188eu 1-1.3:1.0 wlxxxxxxxxxxxxx: renamed from wlan0
[15360.068511] systemd-udevd[2288]: Using default interface naming scheme 'v240'.


On Pogo B1 kernel 4.4.201
[  282.990067] usb 1-1.4: new high-speed USB device number 4 using oxnas-ehci
[  283.101150] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=8179
[  283.108034] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  283.115699] usb 1-1.4: Product: 802.11n NIC
[  283.119907] usb 1-1.4: Manufacturer: Realtek
[  283.124602] usb 1-1.4: SerialNumber: 000B8195xxxx


Also if you could add driver for RTL8188SU, that would be great as well.
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 25, 2020 11:25PM
I got the 4.14.176 kernel running on this Pogo V3 OXNAS. It does seem to have suports for both Realtek devices above.

Will need to do some testing before I can release it.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 26, 2020 06:49AM
Thanks so much, bodhi.
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 26, 2020 11:41PM
jeyrey,

Please test and report back:

https://forum.doozan.com/read.php?2,16044,100689,page=25#msg-100689

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 27, 2020 02:10AM
bodhi,
I have installed the new kernel 4.14.176. Everything looks ok except that when I plugin the realtek wifi adapter, nothing happened.

$ dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.176-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #2 SMP PREEMPT Sun Apr 26 15:24:37 PDT 2020
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Pogoplug V3 Classic
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c0b304e0, node_mem_map c7ef9000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] random: get_random_bytes called from start_kernel+0x84/0x3f4 with crng_init=0
[    0.000000] percpu: Embedded 15 pages/cpu s29548 r8192 d23700 u61440
[    0.000000] pcpu-alloc: s29548 r8192 d23700 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data)
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 114252K/131072K available (7168K kernel code, 199K rwdata, 1524K rodata, 1024K init, 245K bss, 16820K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
                   lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
                   modules : 0xbf000000 - 0xc0000000   (  16 MB)
                     .text : 0xc0008000 - 0xc0800000   (8160 kB)
                     .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
                     .data : 0xc0b00000 - 0xc0b31f28   ( 200 kB)
                      .bss : 0xc0b38384 - 0xc0b757a0   ( 246 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] FPGA IRQ chip 0 "interrupt-controller" @ c8804000, 32 irqs, parent IRQ: 16
[    0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[    0.000046] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[    0.000058] timer_oxnas_rps: Registered clocksource rate 390625Hz
[    0.000081] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500
[    0.000225] GIC: PPI13 is secure or misconfigured
[    0.000273] GIC: PPI13 is secure or misconfigured
[    0.000437] Console: colour dummy device 80x30
[    0.000481] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[    0.050368] pid_max: default: 32768 minimum: 301
[    0.050624] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.050647] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051543] CPU: Testing write buffer coherency: ok
[    0.090432] Setting up static identity map for 0x60100000 - 0x60100038
[    0.110330] Hierarchical SRCU implementation.
[    0.150336] smp: Bringing up secondary CPUs ...
[    0.220436] GIC: PPI13 is secure or misconfigured
[    0.280616] smp: Brought up 1 node, 2 CPUs
[    0.280650] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[    0.281374] devtmpfs: initialized
[    0.286510] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.286543] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.286873] prandom: seed boundary self test passed
[    0.291159] prandom: 100 self tests passed
[    0.291179] pinctrl core: initialized pinctrl subsystem
[    0.291863] NET: Registered protocol family 16
[    0.293473] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.295616] cpuidle: using governor ladder
[    0.295682] cpuidle: using governor menu
[    0.313187] vgaarb: loaded
[    0.313715] SCSI subsystem initialized
[    0.314055] libata version 3.00 loaded.
[    0.314401] usbcore: registered new interface driver usbfs
[    0.314508] usbcore: registered new interface driver hub
[    0.314659] usbcore: registered new device driver usb
[    0.314844] pps_core: LinuxPPS API ver. 1 registered
[    0.314859] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.314892] PTP clock support registered
[    0.315919] clocksource: Switched to clocksource oxnas_rps_clocksource_timer
[    0.331481] NET: Registered protocol family 2
[    0.332392] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.332436] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.332472] TCP: Hash tables configured (established 1024 bind 1024)
[    0.332636] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.332684] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.332953] NET: Registered protocol family 1
[    0.333752] RPC: Registered named UNIX socket transport module.
[    0.333772] RPC: Registered udp transport module.
[    0.333785] RPC: Registered tcp transport module.
[    0.333798] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.333816] PCI: CLS 0 bytes, default 32
[    0.334187] Unpacking initramfs...
[    0.888391] Freeing initrd memory: 4776K
[    0.889579] Initialise system trusted keyrings
[    0.889666] Key type blacklist registered
[    0.889986] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.897223] zbud: loaded
[    0.901647] NFS: Registering the id_resolver key type
[    0.901690] Key type id_resolver registered
[    0.901703] Key type id_legacy registered
[    0.901731] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.901747] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.902553] fuse init (API version 7.26)
[    0.903434] orangefs_debugfs_init: called with debug mask: :none: :0:
[    0.903685] orangefs_init: module version upstream loaded
[    2.876456] Key type asymmetric registered
[    2.876490] Asymmetric key parser 'x509' registered
[    2.876597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.876618] io scheduler noop registered
[    2.876633] io scheduler deadline registered
[    2.876697] io scheduler cfq registered (default)
[    2.878320] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    2.879731] console [ttyS0] disabled
[    2.879869] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A
[    3.454241] console [ttyS0] enabled
[    3.468167] loop: module loaded
[    3.473185] scsi host0: sata_oxnas
[    3.476935] ata1: SATA max UDMA/133 irq 57
[    3.481128] sata_oxnas: resetting SATA core
[    3.546263] nand: Could not find valid ONFI parameter page; aborting
[    3.552599] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[    3.558973] nand: Hynix NAND 128MiB 3,3V 8-bit
[    3.563399] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    3.570982] Scanning device for bad blocks
[    3.657817] 2 ofpart partitions found on MTD device 41000000.nand-controller
[    3.664837] Creating 2 MTD partitions on "41000000.nand-controller":
[    3.671206] 0x000000000000-0x000000e00000 : "boot"
[    3.677649] 0x000000e00000-0x000008000000 : "data"
[    3.685378] libphy: Fixed MDIO Bus: probed
[    3.689968] oxnas-dwmac 40400000.ethernet: PTP uses main clock
[    3.695787] oxnas-dwmac 40400000.ethernet: no reset control found
[    3.766021] stmmac - user ID: 0x12, Synopsys ID: 0x35
[    3.771056] oxnas-dwmac 40400000.ethernet: Ring mode enabled
[    3.776744] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported
[    3.784023] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors
[    3.790812] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors
[    3.797424] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported
[    3.804702] oxnas-dwmac 40400000.ethernet: COE Type 2
[    3.809753] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported
[    3.816629] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported
[    3.822881] oxnas-dwmac 40400000.ethernet (unnamed net_device) (uninitialized): device MAC address xx:xx:xx:xx:xx:xx
[    3.827786] ata1: SATA link down (SStatus 0 SControl 310)
[    3.833384] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    3.868797] libphy: stmmac: probed
[    3.872202] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    3.881689] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL)
[    3.892078] PPP generic driver version 2.4.2
[    3.896696] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.903201] ehci-pci: EHCI PCI platform driver
[    4.116049] oxnas-ehci 40200100.ehci: EHCI Host Controller
[    4.121564] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[    4.129446] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100
[    4.155985] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[    4.162291] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.169113] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.176340] usb usb1: Product: EHCI Host Controller
[    4.181199] usb usb1: Manufacturer: Linux 4.14.176-oxnas-tld-1 ehci_hcd
[    4.187816] usb usb1: SerialNumber: 40200100.ehci
[    4.193295] hub 1-0:1.0: USB hub found
[    4.197204] hub 1-0:1.0: 2 ports detected
[    4.202224] usbcore: registered new interface driver cdc_wdm
[    4.208064] usbcore: registered new interface driver usb-storage
[    4.214179] usbcore: registered new interface driver usbserial
[    4.220167] usbcore: registered new interface driver usbserial_generic
[    4.226787] usbserial: USB Serial support registered for generic
[    4.233062] mousedev: PS/2 mouse device common for all mice
[    4.238855] i2c /dev entries driver
[    4.243494] hidraw: raw HID events driver (C) Jiri Kosina
[    4.249118] usbcore: registered new interface driver usbhid
[    4.254663] usbhid: USB HID core driver
[    4.259863] NET: Registered protocol family 10
[    4.265735] Segment Routing with IPv6
[    4.269544] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    4.277268] NET: Registered protocol family 17
[    4.281832] Key type dns_resolver registered
[    4.287262] registered taskstats version 1
[    4.291343] Loading compiled-in X.509 certificates
[    4.296304] zswap: loaded using pool lzo/zbud
[    4.334784] Key type big_key registered
[    4.354247] Key type encrypted registered
[    4.360332] hctosys: unable to open rtc device (rtc0)
[    4.367470] Freeing unused kernel memory: 1024K
[    4.552496] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.561254] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.563765] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.568540] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[    4.798036] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    4.804764] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.822937] usb 1-1: Product: USB2.0 Hub
[    4.830330] hub 1-1:1.0: USB hub found
[    4.838018] hub 1-1:1.0: 4 ports detected
[    5.166069] usb 1-1.3: new high-speed USB device number 3 using oxnas-ehci
[    5.342594] usb 1-1.3: New USB device found, idVendor=1567, idProduct=8902
[    5.349509] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.356851] usb 1-1.3: Product: USB Product String123456
[    5.362140] usb 1-1.3: Manufacturer: USB Flash Disk
[    5.367037] usb 1-1.3: SerialNumber: 121030032032
[    5.372830] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    5.379796] scsi host1: usb-storage 1-1.3:1.0
[    5.485972] usb 1-1.4: new high-speed USB device number 4 using oxnas-ehci
[    5.637091] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=8179
[    5.643962] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.651317] usb 1-1.4: Product: 802.11n NIC
[    5.655488] usb 1-1.4: Manufacturer: Realtek
[    5.659860] usb 1-1.4: SerialNumber: 000B81xxxxxx
[    5.687715] usbcore: registered new interface driver uas
[    5.738009] netpoll: netconsole: local port 6666
[    5.742937] netpoll: netconsole: local IPv4 address 192.168.1.15
[    5.749619] netpoll: netconsole: interface 'eth0'
[    5.754736] netpoll: netconsole: remote port 6666
[    5.759493] netpoll: netconsole: remote IPv4 address 192.168.1.2
[    5.765821] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[    5.773053] netpoll: netconsole: device eth0 not up yet, forcing it
[    5.780354] oxnas-dwmac 40400000.ethernet eth0: No phy led trigger registered for speed(-1)
[    5.788733] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    5.802711] oxnas-dwmac 40400000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[    5.813831] oxnas-dwmac 40400000.ethernet eth0: registered PTP clock
[    5.821278] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.407956] scsi 1:0:0:0: Direct-Access     SCSIDISK SCSI_DISK_1234   1.00 PQ: 0 ANSI: 4
[    6.424593] sd 1:0:0:0: [sda] 7880704 512-byte logical blocks: (4.03 GB/3.76 GiB)
[    6.434329] sd 1:0:0:0: [sda] Write Protect is off
[    6.443133] sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
[    6.445278] sd 1:0:0:0: [sda] No Caching mode page found
[    6.451123] sd 1:0:0:0: [sda] Assuming drive cache: write through
[    6.473085]  sda: sda1
[    6.486845] sd 1:0:0:0: [sda] Attached SCSI removable disk
[    6.529671] random: fast init done
[    6.886899] oxnas-dwmac 40400000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    6.895511] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.929648] console [netcon0] enabled
[    6.933317] netconsole: network logging started
[   17.338339] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   21.752842] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   26.190648] random: crng init done
[   26.194076] random: 7 urandom warning(s) missed due to ratelimiting

$ lsmod
Module                  Size  Used by
netconsole             16384  0
configfs               32768  2 netconsole
uas                    20480  0
dwmac_generic          16384  0

After I pulled and plugged it back in:

[  528.981306] usb 1-1.4: new high-speed USB device number 5 using oxnas-ehci
[  529.132469] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=8179
[  529.139371] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  529.147200] usb 1-1.4: Product: 802.11n NIC
[  529.151459] usb 1-1.4: Manufacturer: Realtek
[  529.155824] usb 1-1.4: SerialNumber: 000B81xxxxxx

I have also installed the firmware-realtek package but nothing changes. Am I missing something here?
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 27, 2020 02:43AM
jeyrey,

Try

modprobe rtl8xxxu

And then plug in the Realtek wifi adapter.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 27, 2020 04:07AM
I got this after modprobe:

[ 1033.157969] usbcore: registered new interface driver rtl8xxxu

and

# lsmod
Module                  Size  Used by
rtl8xxxu               94208  0
mac80211              372736  1 rtl8xxxu
cfg80211              266240  1 mac80211
rfkill                 20480  1 cfg80211
netconsole             16384  0
configfs               32768  2 netconsole
uas                    20480  0
dwmac_generic          16384  0

but
# iwconfig
sit0      no wireless extensions.

ip6tnl0   no wireless extensions.

lo        no wireless extensions.

eth0      no wireless extensions.

There is no wlan0 or similar.
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 27, 2020 04:49AM
jeyrey,

Darn! I've mis-configured it :) it is in the staging area (not fully supported buy mainline, but available to be included)

Will recompile this module and upload it here tomorrow.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 27, 2020 05:56AM
Thanks, bodhi. Not urgent but thanks. :)
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 27, 2020 10:55PM
Log in as root. Download the attached module r8188eu.ko.


mkdir -p /lib/modules/4.14.176-oxnas-tld-1/kernel/drivers/staging/rtl8188eu/
cp -a r8188eu.ko /lib/modules/4.14.176-oxnas-tld-1/kernel/drivers/staging/rtl8188eu/


And then plug in the Wifi USB device. Reboot.

If it does not detect the Wifi USB automatically, then modprobe it

modprobe r8188eu

-bodhi
===========================
Forum Wiki
bodhi's corner
Attachments:
open | download - r8188eu.ko (464.1 KB)
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 28, 2020 01:25AM
I got this when trying to run modprobe

# modprobe r8188eu
modprobe: FATAL: Module r8188eu not found in directory /lib/modules/4.14.176-oxnas-tld-1
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 28, 2020 04:13PM
jeyrey,

Try
cd /lib/modules/4.14.176-oxnas-tld-1/kernel/drivers/staging/rtl8188eu/
modprobe r8188eu

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 29, 2020 05:50AM
Still got the same error:
# cd /lib/modules/4.14.176-oxnas-tld-1/kernel/drivers/staging/rtl8188eu/
# ls
r8188eu.ko
# modprobe r8188eu
modprobe: FATAL: Module r8188eu not found in directory /lib/modules/4.14.176-oxnas-tld-1
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 29, 2020 08:39AM
depmod -a; modprobe r8188eu
or
insmod /lib/modules/4.14.176-oxnas-tld-1/kernel/drivers/staging/rtl8188eu/r8188eu.ko



Edited 1 time(s). Last edit at 04/29/2020 08:41AM by 1000001101000.
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 29, 2020 04:39PM
>
> depmod -a; modprobe r8188eu
>
> or
>
> insmod
> /lib/modules/4.14.176-oxnas-tld-1/kernel/drivers/staging/rtl8188eu/r8188eu.ko
>

Indeed, it's a more foolproof way to load out of tree module. Thx.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 29, 2020 09:51PM
This is what I got:

# depmod -a; modprobe r8188eu
modprobe: ERROR: could not insert 'r8188eu': Exec format error

# insmod insmod /lib/modules/4.14.176-oxnas-tld-1/kernel/drivers/staging/rtl8188eu/r8188eu.ko
insmod: ERROR: could not load module insmod: No such file or directory

Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 29, 2020 10:21PM
jeyrey Wrote:
-------------------------------------------------------
> This is what I got:
>
>
> # depmod -a; modprobe r8188eu
> modprobe: ERROR: could not insert 'r8188eu': Exec
> format error
> 
> # insmod insmod
> /lib/modules/4.14.176-oxnas-tld-1/kernel/drivers/staging/rtl8188eu/r8188eu.ko
> insmod: ERROR: could not load module insmod: No
> such file or directory
> 
>

Let me try on my Pogo.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 29, 2020 10:53PM
It looks like there is some dependency problem. Stay tune.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 29, 2020 11:35PM
I see the problem. It is a "version magic" incompatibilty. I need to recompile the module.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 30, 2020 06:23AM
If necessary you could also force it:
modprobe -f
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 30, 2020 04:55PM
I am seeing some symbols dependency problem, too. I think possibly the kernel Staging drivers option has brought in some new symbols that this module cannot find in the current kernel.

I guess jeyrey can wait until the next stable 4.14.x is released, when I will build the next version. 4.14 is an LTS kernel so it will be in the near future.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
April 30, 2020 09:30PM
No problem, bodhi. It is not urgent. I got it running using the cable now.
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
May 23, 2020 08:39AM
I had a similar issue with realtec rtl88x2bu, see:
https://forum.doozan.com/read.php?2,92749,92749#msg-92749

it may be helpful!

learning is living! Echowarrior108



device pogoplug-pro v3

Debian GNU/Linux bullseye/sid \n \l
Linux version 4.14.180-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6) ) #1 SMP PREEMPT Fri Nov 15 04:12:45 PST 2019
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
May 23, 2020 05:55PM
This Wifi adapter should work with the new kernel now:

Quote

Updated 14 May 2020:

Kernel linux-4.14.180-oxnas-tld-1 package was uploaded.

New/Update features:

- Pick up Security patch from mainline.
- Fix the SATA problem with Pogo V3 Pro.
- Enable the kernel to use the persistent MAC address passed by u-boot to bring up network.
- Add staging Wifi driver r8188eu.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Request for Pogo V3 OXNAS Wifi driver in future kernel 4.14.x release
May 24, 2020 03:28AM
Thanks, echowarrior108 and bodhi. Will give it a try when I go back.
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: