Welcome! Log In Create A New Profile

Advanced

Hello, help to fix my device... [Akitio MyCloud Mini]

Posted by Kang Jinsu 
Re: Hello, help to fix my device... [Akitio MyCloud Mini]
June 10, 2020 05:37AM
Once you got here:
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~# ls
.  ..  .bash_history  .bashrc  .config  .nano  .profile  .ssh
root@debian:~#

It booted OK.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Hello, help to fix my device... [Akitio MyCloud Mini]
June 10, 2020 05:44AM
Yes, E02 is already done.

I ordered the P22,
However, it contains a completely different E02, which makes it difficult.
It is impossible to return because it is overseas shopping. It is a pity.

Fortunately, it's the same as the V4, so it's easy to work with.
E02 boots well. The rescue system was also possible.

I hope Akitio is also possible easy, though.
OXNAS doesn't allow that easily.



Edited 1 time(s). Last edit at 06/10/2020 05:49AM by Kang Jinsu.
Re: Hello, help to fix my device... [Akitio MyCloud Mini]
June 10, 2020 05:47AM
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~# ls
.  ..  .bash_history  .bashrc  .config  .nano  .profile  .ssh
root@debian:~#

Ah, it is sata boot from MyCloud Mini.

NAND boot not working...


U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12)
  Boot device: NAND
Attempting to set PLLA to 850 MHz ...
  plla_ctrl0 : 0000020a
  plla_ctrl1 : 00330000
  plla_ctrl2 : 0065008b
  plla_ctrl3 : 000000f1

PLLA Set

I erase all and recorded NAND again today,
but what came back was...
Re: Hello, help to fix my device... [Akitio MyCloud Mini]
June 10, 2020 04:40PM
Kang Jinsu,

I think you should temporarily ignore NAND for now. Just boot with HDD.

Your new NAND chip seems to be OK. But still there is something wrong that we cannot see.

I plan to rebuild a new SPL image to run in 700 Mhz (as stock does). Perhaps we will be able to see a little more with the new SPL. But I am not sure when I can get to that task.

-bodhi
===========================
Forum Wiki
bodhi's corner
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: