IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x
Posted by sakatgg
|
IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 23, 2020 09:48PM |
Registered: 6 years ago Posts: 32 |
Hi bodhi.
IconBIT IS608 (Oxnas (OX820))
Boots normally from sata-hdd Debian 10 (buster) inclusive until linux-4.4.201-oxnas-tld-1.bodhi
On linux-4.14.176-oxnas-tld-1.bodhi and linux-4.14.180-oxnas-tld-1.bodhi - Kernel panic - not syncing
With old linux-dtb-4.14.176-oxnas-tld-1 and new DTB tarball linux-dtb-4.14.176-oxnas-tld-2.tar - Kernel panic
Also tried your Rootfs Debian-4.14.180-oxnas-tld-1-rootfs-bodhi.tar.bz2 - Kernel panic
Edited 2 time(s). Last edit at 05/23/2020 10:34PM by bodhi.
IconBIT IS608 (Oxnas (OX820))
Boots normally from sata-hdd Debian 10 (buster) inclusive until linux-4.4.201-oxnas-tld-1.bodhi
On linux-4.14.176-oxnas-tld-1.bodhi and linux-4.14.180-oxnas-tld-1.bodhi - Kernel panic - not syncing
With old linux-dtb-4.14.176-oxnas-tld-1 and new DTB tarball linux-dtb-4.14.176-oxnas-tld-2.tar - Kernel panic
Also tried your Rootfs Debian-4.14.180-oxnas-tld-1-rootfs-bodhi.tar.bz2 - Kernel panic
Edited 2 time(s). Last edit at 05/23/2020 10:34PM by bodhi.
|
Re: Linux Kernel 4.14.180 Oxnas (OX820) Pogo V3 package and Debian rootfs May 23, 2020 09:55PM |
Admin Registered: 13 years ago Posts: 18,548 |
sakatgg Wrote:
-------------------------------------------------------
> Hi bodhi.
> IconBIT IS608 (Oxnas (OX820))
> Boots normally from sata-hdd Debian 10 (buster)
> inclusive until linux-4.4.201-oxnas-tld-1.bodhi
>
> On linux-4.14.176-oxnas-tld-1.bodhi and
> linux-4.14.180-oxnas-tld-1.bodhi -
> Kernel panic -
> not syncing
>
> With old linux-dtb-4.14.176-oxnas-tld-1 and new
> DTB tarball linux-dtb-4.14.176-oxnas-tld-2.tar -
> Kernel panic
>
> Also tried your Rootfs
> Debian-4.14.180-oxnas-tld-1-rootfs-bodhi.tar.bz2 -
> Kernel panic
Please post the boot log.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
-------------------------------------------------------
> Hi bodhi.
> IconBIT IS608 (Oxnas (OX820))
> Boots normally from sata-hdd Debian 10 (buster)
> inclusive until linux-4.4.201-oxnas-tld-1.bodhi
>
> On linux-4.14.176-oxnas-tld-1.bodhi and
> linux-4.14.180-oxnas-tld-1.bodhi -
> Kernel panic -
> not syncing
>
> With old linux-dtb-4.14.176-oxnas-tld-1 and new
> DTB tarball linux-dtb-4.14.176-oxnas-tld-2.tar -
> Kernel panic
>
> Also tried your Rootfs
> Debian-4.14.180-oxnas-tld-1-rootfs-bodhi.tar.bz2 -
> Kernel panic
Please post the boot log.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Linux Kernel 4.14.180 Oxnas (OX820) Pogo V3 package and Debian rootfs May 23, 2020 10:06PM |
Registered: 6 years ago Posts: 32 |
serial port
Edited 1 time(s). Last edit at 05/23/2020 10:09PM by sakatgg.
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12)
Boot device: SATA
Attempting to set PLLA to 800 MHz ...
plla_ctrl0 : 0000030a
plla_ctrl1 : 00400000
plla_ctrl2 : 007f0068
plla_ctrl3 : 00000193
PLLA Set
Bus 0: OK
Device 0:
reading bootargs.bin
reading u-boot.img
reading u-boot.img
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS
DRAM: 128 MiB
IDE: Bus 0: OK
Device 0: Model: ST380815AS Firm: 3.AAC Ser#: 6QZ0M5Y2
Type: Hard Disk
Supports 48-bit addressing
Capacity: 76318.0 MB = 74.5 GB (156299375 x 512)
NAND: 256 MiB
reading u-boot.env
In: serial
Out: serial
Err: serial
Net: mii0
## Error: "safeboot" not defined
Hit any key to stop autoboot: 0
4600072 bytes read in 718 ms (6.1 MiB/s)
8924 bytes read in 46 ms (189.5 KiB/s)
magic: 0xd00dfeed
totalsize: 0x22dc (8924)
off_dt_struct: 0x38
off_dt_strings: 0x1fac
off_mem_rsvmap: 0x28
version: 17
last_comp_version: 16
boot_cpuid_phys: 0x0
size_dt_strings: 0x330
size_dt_struct: 0x1f74
number mem_rsv: 0x0
## Booting kernel from Legacy Image at 60000000 ...
Image Name: Linux-4.14.176-oxnas-tld-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4600008 Bytes = 4.4 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 61000000
Booting using the fdt blob at 0x61000000
Loading Kernel Image ... OK
Loading Device Tree to 67e26000, end 67e2b2db ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.176-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #2 SMP PREEMPT Sun Apr 26 15:24:37 PDT 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Pogoplug V3 Classic
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] random: get_random_bytes called from start_kernel+0x84/0x3f4 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s29548 r8192 d23700 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: earlyprintk
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 119032K/131072K available (7168K kernel code, 199K rwdata, 1524K rodata, 1024K init, 245K bss, 12040K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b31f28 ( 200 kB)
[ 0.000000] .bss : 0xc0b38384 - 0xc0b757a0 ( 246 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ c8804000, 32 irqs, parent IRQ: 16
[ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.008168] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.018895] timer_oxnas_rps: Registered clocksource rate 390625Hz
[ 0.025054] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500
[ 0.033584] GIC: PPI13 is secure or misconfigured
[ 0.038384] GIC: PPI13 is secure or misconfigured
[ 0.043310] Console: colour dummy device 80x30
[ 0.047820] console [tty0] enabled
[ 0.051356] bootconsole [earlycon0] disabled
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.176-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #2 SMP PREEMPT Sun Apr 26 15:24:37 PDT 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Pogoplug V3 Classic
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] random: get_random_bytes called from start_kernel+0x84/0x3f4 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s29548 r8192 d23700 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: earlyprintk
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 119032K/131072K available (7168K kernel code, 199K rwdata, 1524K rodata, 1024K init, 245K bss, 12040K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b31f28 ( 200 kB)
[ 0.000000] .bss : 0xc0b38384 - 0xc0b757a0 ( 246 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ c8804000, 32 irqs, parent IRQ: 16
[ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.008168] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.018895] timer_oxnas_rps: Registered clocksource rate 390625Hz
[ 0.025054] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500
[ 0.033584] GIC: PPI13 is secure or misconfigured
[ 0.038384] GIC: PPI13 is secure or misconfigured
[ 0.043310] Console: colour dummy device 80x30
[ 0.047820] console [tty0] enabled
[ 0.051356] bootconsole [earlycon0] disabled
[ 0.055731] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440)
[ 0.098511] pid_max: default: 32768 minimum: 301
[ 0.098803] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.098846] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.099921] CPU: Testing write buffer coherency: ok
[ 0.138552] Setting up static identity map for 0x60100000 - 0x60100038
[ 0.158451] Hierarchical SRCU implementation.
[ 0.198448] smp: Bringing up secondary CPUs ...
[ 0.268561] GIC: PPI13 is secure or misconfigured
[ 0.328760] smp: Brought up 1 node, 2 CPUs
[ 0.328821] SMP: Total of 2 processors activated (638.97 BogoMIPS).
[ 0.329500] devtmpfs: initialized
[ 0.334894] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.334958] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.335321] prandom: seed boundary self test passed
[ 0.339898] prandom: 100 self tests passed
[ 0.339932] pinctrl core: initialized pinctrl subsystem
[ 0.340687] NET: Registered protocol family 16
[ 0.342312] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.344750] cpuidle: using governor ladder
[ 0.344842] cpuidle: using governor menu
[ 0.363315] vgaarb: loaded
[ 0.363880] SCSI subsystem initialized
[ 0.364638] usbcore: registered new interface driver usbfs
[ 0.364766] usbcore: registered new interface driver hub
[ 0.364938] usbcore: registered new device driver usb
[ 0.365148] pps_core: LinuxPPS API ver. 1 registered
[ 0.365194] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.365260] PTP clock support registered
[ 0.366318] clocksource: Switched to clocksource oxnas_rps_clocksource_timer
[ 0.382960] NET: Registered protocol family 2
[ 0.383959] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.384038] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.384099] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.384296] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.384381] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.384696] NET: Registered protocol family 1
[ 0.385579] RPC: Registered named UNIX socket transport module.
[ 0.385635] RPC: Registered udp transport module.
[ 0.385664] RPC: Registered tcp transport module.
[ 0.385692] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.387302] Initialise system trusted keyrings
[ 0.387407] Key type blacklist registered
[ 0.387727] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.395548] zbud: loaded
[ 0.400240] NFS: Registering the id_resolver key type
[ 0.400320] Key type id_resolver registered
[ 0.400348] Key type id_legacy registered
[ 0.400391] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.400424] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.401359] fuse init (API version 7.26)
[ 0.402352] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 0.402639] orangefs_init: module version upstream loaded
[ 2.472046] Key type asymmetric registered
[ 2.472110] Asymmetric key parser 'x509' registered
[ 2.472238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.472286] io scheduler noop registered
[ 2.472314] io scheduler deadline registered
[ 2.472394] io scheduler cfq registered (default)
[ 2.474078] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 2.475681] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A
[ 3.044247] console [ttyS0] enabled
[ 3.058982] loop: module loaded
[ 3.064010] scsi host0: sata_oxnas
[ 3.067809] ata1: SATA max UDMA/133 irq 57
[ 3.072033] sata_oxnas: resetting SATA core
[ 3.136678] nand: Could not find valid ONFI parameter page; aborting
[ 3.143045] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
[ 3.149440] nand: Hynix NAND 256MiB 3,3V 8-bit
[ 3.153886] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 3.161495] Scanning device for bad blocks
[ 3.192829] Bad eraseblock 324 at 0x000002880000
[ 3.197524] Bad eraseblock 325 at 0x0000028a0000
[ 3.344524] 2 ofpart partitions found on MTD device 41000000.nand-controller
[ 3.351595] Creating 2 MTD partitions on "41000000.nand-controller":
[ 3.357972] 0x000000000000-0x000000e00000 : "boot"
[ 3.364392] 0x000000e00000-0x000008000000 : "data"
[ 3.373475] libphy: Fixed MDIO Bus: probed
[ 3.378124] oxnas-dwmac 40400000.ethernet: PTP uses main clock
[ 3.383976] oxnas-dwmac 40400000.ethernet: no reset control found
[ 3.456424] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 3.461493] oxnas-dwmac 40400000.ethernet: Ring mode enabled
[ 3.467207] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported
[ 3.474513] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors
[ 3.481328] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors
[ 3.487969] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported
[ 3.495272] oxnas-dwmac 40400000.ethernet: COE Type 2
[ 3.500349] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported
[ 3.507248] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported
[ 3.513512] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 3.530938] libphy: stmmac: probed
[ 3.534371] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 3.543900] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL)
[ 3.554406] PPP generic driver version 2.4.2
[ 3.559101] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.565634] ehci-pci: EHCI PCI platform driver
[ 3.586421] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.644549] ata1.00: HPA detected: current 156299375, native 156301488
[ 3.651146] ata1.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133
[ 3.656755] ata1.00: 156299375 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 3.702871] ata1.00: configured for UDMA/133
[ 3.717877] scsi 0:0:0:0: Direct-Access ATA ST380815AS C PQ: 0 ANSI: 5
[ 3.727938] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 3.735736] sd 0:0:0:0: [sda] Write Protect is off
[ 3.740892] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.776496] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 3.776693] sda: sda1 sda2 sda3
[ 3.782046] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 3.788055] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.793144] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100
[ 3.826391] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 3.832734] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.839582] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.846835] usb usb1: Product: EHCI Host Controller
[ 3.851706] usb usb1: Manufacturer: Linux 4.14.176-oxnas-tld-1 ehci_hcd
[ 3.858344] usb usb1: SerialNumber: 40200100.ehci
[ 3.864035] hub 1-0:1.0: USB hub found
[ 3.867934] hub 1-0:1.0: 2 ports detected
[ 3.872960] usbcore: registered new interface driver cdc_wdm
[ 3.878850] usbcore: registered new interface driver usb-storage
[ 3.885022] usbcore: registered new interface driver usbserial
[ 3.890967] usbcore: registered new interface driver usbserial_generic
[ 3.897602] usbserial: USB Serial support registered for generic
[ 3.903959] mousedev: PS/2 mouse device common for all mice
[ 3.909716] i2c /dev entries driver
[ 3.914493] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.920220] usbcore: registered new interface driver usbhid
[ 3.925795] usbhid: USB HID core driver
[ 3.931064] NET: Registered protocol family 10
[ 3.937182] Segment Routing with IPv6
[ 3.940948] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.948710] NET: Registered protocol family 17
[ 3.953308] Key type dns_resolver registered
[ 3.958929] registered taskstats version 1
[ 3.963041] Loading compiled-in X.509 certificates
[ 3.968005] zswap: loaded using pool lzo/zbud
[ 3.980858] Key type big_key registered
[ 3.987517] Key type encrypted registered
[ 3.993697] hctosys: unable to open rtc device (rtc0)
[ 3.999720] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[ 4.007303] Please append a correct "root=" boot option; here are the available partitions:
[ 4.015667] 1f00 14336 mtdblock0
[ 4.015674] (driver?)
[ 4.022277] 1f01 116736 mtdblock1
[ 4.022284] (driver?)
[ 4.028904] 0800 78149687 sda
[ 4.028912] driver: sd
[ 4.035008] 0801 16384 sda1 00008000-01
[ 4.035013]
[ 4.041433] 0802 4194304 sda2 00008000-02
[ 4.041438]
[ 4.047854] 0803 73937975 sda3 00008000-03
[ 4.047861]
[ 4.054220] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 4.062471] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.176-oxnas-tld-1 #2
[ 4.069588] Hardware name: Generic DT based system
[ 4.074396] [<c01095b0>] (unwind_backtrace) from [<c01053bc>] (show_stack+0x10/0x14)
[ 4.082147] [<c01053bc>] (show_stack) from [<c0737ecc>] (dump_stack+0xb4/0xd0)
[ 4.089379] [<c0737ecc>] (dump_stack) from [<c0111b70>] (panic+0xec/0x268)
[ 4.096263] [<c0111b70>] (panic) from [<c0a012b8>] (mount_block_root+0x1e0/0x2a8)
[ 4.103746] [<c0a012b8>] (mount_block_root) from [<c0a01468>] (mount_root+0xe8/0x128)
[ 4.111580] [<c0a01468>] (mount_root) from [<c0a015d8>] (prepare_namespace+0x130/0x194)
[ 4.119577] [<c0a015d8>] (prepare_namespace) from [<c0a00e58>] (kernel_init_freeable+0x17c/0x1c4)
[ 4.128442] [<c0a00e58>] (kernel_init_freeable) from [<c074aba8>] (kernel_init+0x8/0x110)
[ 4.136614] [<c074aba8>] (kernel_init) from [<c01029b8>] (ret_from_fork+0x14/0x3c)
[ 4.144186] CPU0: stopping
[ 4.146915] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.176-oxnas-tld-1 #2
[ 4.154037] Hardware name: Generic DT based system
[ 4.158840] [<c01095b0>] (unwind_backtrace) from [<c01053bc>] (show_stack+0x10/0x14)
[ 4.166586] [<c01053bc>] (show_stack) from [<c0737ecc>] (dump_stack+0xb4/0xd0)
[ 4.173813] [<c0737ecc>] (dump_stack) from [<c01082a8>] (handle_IPI+0x190/0x1dc)
[ 4.181209] [<c01082a8>] (handle_IPI) from [<c01014c8>] (gic_handle_irq+0x7c/0x8c)
[ 4.188774] [<c01014c8>] (gic_handle_irq) from [<c0106278>] (__irq_svc+0x58/0x8c)
[ 4.196244] Exception stack(0xc0b01f28 to 0xc0b01f70)
[ 4.201290] 1f20: 00000001 00000000 00000000 00000000 00000000 ffffe000
[ 4.209456] 1f40: c0b03ae4 c0b03a88 00000000 00000000 c0a39e68 c08f5f20 00000000 c0b01f78
[ 4.217617] 1f60: c0103278 c010327c 60000013 ffffffff
[ 4.222668] [<c0106278>] (__irq_svc) from [<c010327c>] (arch_cpu_idle+0x28/0x30)
[ 4.230067] [<c010327c>] (arch_cpu_idle) from [<c0149eac>] (do_idle+0x180/0x1d4)
[ 4.237465] [<c0149eac>] (do_idle) from [<c014a1c0>] (cpu_startup_entry+0x18/0x1c)
[ 4.245035] [<c014a1c0>] (cpu_startup_entry) from [<c0a00c50>] (start_kernel+0x368/0x3f4)
[ 4.253204] [<c0a00c50>] (start_kernel) from [<60008074>] (0x60008074)
[ 4.259732] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Edited 1 time(s). Last edit at 05/23/2020 10:09PM by sakatgg.
|
Re: Linux Kernel 4.14.180 Oxnas (OX820) Pogo V3 package and Debian rootfs May 23, 2020 10:43PM |
Admin Registered: 13 years ago Posts: 18,548 |
sakatgg,
Looks like you've made a mis-step during kernel installation.
You should not do Step 4 (you are booting with newer u-boot in the HDD, not with stock u-boot).
Mount your HDD on another Linux box and reverse Step 4:
And connect it back to the box and boot.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Looks like you've made a mis-step during kernel installation.
You should not do Step 4 (you are booting with newer u-boot in the HDD, not with stock u-boot).
Quote
4. Create uImage with embedded DTB for booting with stock u-boot. Skip this step if you have installed the latest released uboot for OXNAS, or are installing this u-boot at the same time.
Mount your HDD on another Linux box and reverse Step 4:
cd /media/sdb1/boot cp -a uImage uImage.IconBIT cp -a uImage.orig uImage sync
And connect it back to the box and boot.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 24, 2020 09:39AM |
Registered: 6 years ago Posts: 32 |
Executed commands - error "Kernel panic - not syncing" remained
Edited 2 time(s). Last edit at 05/24/2020 09:44AM by sakatgg.
cd /boot tar -xjf linux-4.14.176-oxnas-tld-1.bodhi.tar.bz2 tar -xf linux-dtb-4.14.176-oxnas-tld-2.tar apt-get remove flash-kernel dpkg -i linux-image-4.14.176-oxnas-tld-1_1.0_armel.deb mkimage -A arm -O linux -T kernel -C none -a 0x60008000 -e 0x60008000 -n Linux-4.14.176-oxnas-tld-1 -d vmlinuz-4.14.176-oxnas-tld-1 uImage mkimage -A arm -O linux -T ramdisk -C gzip -a 0x60000000 -e 0x60000000 -n initramfs-4.14.176-oxnas-tld-1 -d initrd.img-4.14.176-oxnas-tld-1 uInitrd fw_setenv dtb_file '/boot/dts/ox820-pogoplug-classic.dtb'
root@debian:/boot# fw_printenv
bootcmd=run distro_bootcmd
bootdelay=2
baudrate=115200
stdin=serial,cros-ec-keyb,usbkbd
stdout=serial,vidconsole
stderr=serial,vidconsole
ethaddr=00:00:11:22:33:44
eth1addr=00:00:11:22:33:45
eth3addr=00:00:11:22:33:46
eth5addr=00:00:11:22:33:47
ipaddr=1.2.3.4
host_boot=if host dev ${devnum}; then setenv devtype host; run scan_dev_for_boot_part; fi
sata_boot=if sata dev ${devnum}; then setenv devtype sata; run scan_dev_for_boot_part; fi
scsi_init=if ${scsi_need_init}; then setenv scsi_need_init false; scsi scan; fi
scsi_boot=run scsi_init; if scsi dev ${devnum}; then setenv devtype scsi; run scan_dev_for_boot_part; fi
virtio_boot=if virtio dev ${devnum}; then setenv devtype virtio; run scan_dev_for_boot_part; fi
boot_prefixes=/ /boot/
boot_scripts=boot.scr.uimg boot.scr
boot_script_dhcp=boot.scr.uimg
boot_targets=host1 host0
boot_syslinux_conf=extlinux/extlinux.conf
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
bootcmd_host1=setenv devnum 1; run host_boot
bootcmd_host0=setenv devnum 0; run host_boot
distro_bootcmd=setenv scsi_need_init; for target in ${boot_targets}; do run bootcmd_${target}; done
bootm_size=0x10000000
kernel_addr_r=0x1000000
fdt_addr_r=0xc00000
ramdisk_addr_r=0x2000000
scriptaddr=0x1000
pxefile_addr_r=0x2000
dtb_file=/boot/dts/ox820-pogoplug-classic.dtb
Edited 2 time(s). Last edit at 05/24/2020 09:44AM by sakatgg.
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 24, 2020 03:17PM |
Registered: 6 years ago Posts: 32 |
Installing linux-4.4.201-oxnas-tld-1.bodhi.tar.bz2 runs fine on Debian 10 (buster)
cd /boot tar -xjf linux-4.4.201-oxnas-tld-1.bodhi.tar.bz2 tar -xf linux-dtb-4.4.201-oxnas-tld-1.tar apt-get remove flash-kernel dpkg -i linux-image-4.4.201-oxnas-tld-1_1.0_armel.deb mkimage -A arm -O linux -T kernel -C none -a 0x60008000 -e 0x60008000 -n Linux-4.4.201-oxnas-tld-1 -d vmlinuz-4.4.201-oxnas-tld-1 uImage mkimage -A arm -O linux -T ramdisk -C gzip -a 0x60000000 -e 0x60000000 -n initramfs-4.4.201-oxnas-tld-1 -d initrd.img-4.4.201-oxnas-tld-1 uInitrd reboot
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12)
Boot device: SATA
Attempting to set PLLA to 800 MHz ...
plla_ctrl0 : 0000030a
plla_ctrl1 : 00400000
plla_ctrl2 : 007f0068
plla_ctrl3 : 00000193
PLLA Set
Bus 0: OK
Device 0:
reading bootargs.bin
reading u-boot.img
reading u-boot.img
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS
DRAM: 128 MiB
IDE: Bus 0: OK
Device 0: Model: ST380815AS Firm: 3.AAC Ser#: 6QZ0M5Y2
Type: Hard Disk
Supports 48-bit addressing
Capacity: 76318.0 MB = 74.5 GB (156299375 x 512)
NAND: 256 MiB
reading u-boot.env
In: serial
Out: serial
Err: serial
Net: mii0
## Error: "safeboot" not defined
Hit any key to stop autoboot: 0
4233352 bytes read in 656 ms (6.2 MiB/s)
7075 bytes read in 16 ms (431.6 KiB/s)
magic: 0xd00dfeed
totalsize: 0x1ba3 (7075)
off_dt_struct: 0x38
off_dt_strings: 0x18f4
off_mem_rsvmap: 0x28
version: 17
last_comp_version: 16
boot_cpuid_phys: 0x0
size_dt_strings: 0x2af
size_dt_struct: 0x18bc
number mem_rsv: 0x0
## Booting kernel from Legacy Image at 60000000 ...
Image Name: Linux-4.4.201-oxnas-tld-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4233288 Bytes = 4 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 61000000
Booting using the fdt blob at 0x61000000
Loading Kernel Image ... OK
Loading Device Tree to 67e26000, end 67e2aba2 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.201-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6) ) #1 SMP PREEMPT Fri Nov 15 04:12:45 PST 2019
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Pogoplug V3 Classic
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[ 0.000000] PERCPU: Embedded 11 pages/cpu @c7edc000 s13516 r8192 d23348 u45056
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/sda2 rootfstype=ext4 ubi.mtd=data,512
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 121576K/131072K available (5893K kernel code, 286K rwdata, 1580K rodata, 220K init, 226K bss, 9496K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc07547f0 (7474 kB)
[ 0.000000] .init : 0xc0755000 - 0xc078c000 ( 220 kB)
[ 0.000000] .data : 0xc078c000 - 0xc07d3bb0 ( 287 kB)
[ 0.000000] .bss : 0xc07d3bb0 - 0xc080c580 ( 227 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:160
[ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.000163] Console: colour dummy device 80x30
[ 0.000199] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440)
[ 0.050030] pid_max: default: 32768 minimum: 301
[ 0.050209] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050232] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.051097] Initializing cgroup subsys net_cls
[ 0.051182] CPU: Testing write buffer coherency: ok
[ 0.051668] Setting up static identity map for 0x60008220 - 0x60008258
[ 0.190156] Brought up 2 CPUs
[ 0.190182] SMP: Total of 2 processors activated (638.97 BogoMIPS).
[ 0.191047] devtmpfs: initialized
[ 0.196195] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.196247] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.196579] prandom: seed boundary self test passed
[ 0.201085] prandom: 100 self tests passed
[ 0.201113] pinctrl core: initialized pinctrl subsystem
[ 0.202017] NET: Registered protocol family 16
[ 0.202585] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.230016] cpuidle: using governor ladder
[ 0.260008] cpuidle: using governor menu
[ 0.265200] gpio-oxnas 44000000.gpio: at address c8848000
[ 0.265638] gpio-oxnas 44100000.gpio: at address c884a000
[ 0.266240] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[ 0.278899] vgaarb: loaded
[ 0.279416] SCSI subsystem initialized
[ 0.280414] usbcore: registered new interface driver usbfs
[ 0.280522] usbcore: registered new interface driver hub
[ 0.280688] usbcore: registered new device driver usb
[ 0.280934] pps_core: LinuxPPS API ver. 1 registered
[ 0.280952] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.281006] PTP clock support registered
[ 0.282350] clocksource: Switched to clocksource rps_clocksource_timer
[ 0.301603] NET: Registered protocol family 2
[ 0.302768] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.302814] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.302853] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.302955] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.303001] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.303298] NET: Registered protocol family 1
[ 0.303838] RPC: Registered named UNIX socket transport module.
[ 0.303861] RPC: Registered udp transport module.
[ 0.303874] RPC: Registered tcp transport module.
[ 0.303887] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.305802] Initialise system trusted keyring
[ 0.319613] zbud: loaded
[ 0.325112] NFS: Registering the id_resolver key type
[ 0.325171] Key type id_resolver registered
[ 0.325189] Key type id_legacy registered
[ 0.325232] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.325255] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.326208] fuse init (API version 7.23)
[ 0.328271] Key type big_key registered
[ 0.400181] Key type asymmetric registered
[ 0.400230] Asymmetric key parser 'x509' registered
[ 0.400384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.400419] io scheduler noop registered
[ 0.400445] io scheduler deadline registered
[ 0.400512] io scheduler cfq registered (default)
[ 0.401175] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.402693] console [ttyS0] disabled
[ 0.402790] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[ 0.917519] console [ttyS0] enabled
[ 0.933365] loop: module loaded
[ 0.938513] scsi host0: sata_oxnas
[ 0.942451] ata1: SATA max UDMA/133 irq 7
[ 0.946549] sata_oxnas: resetting SATA core
[ 0.947694] nand: Could not find valid ONFI parameter page; aborting
[ 0.947737] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
[ 0.947742] nand: Hynix NAND 256MiB 3,3V 8-bit
[ 0.947752] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.947768] Scanning device for bad blocks
[ 0.974382] Bad eraseblock 324 at 0x000002880000
[ 0.974428] Bad eraseblock 325 at 0x0000028a0000
[ 1.114984] 2 ofpart partitions found on MTD device 41000000.nand
[ 1.121085] Creating 2 MTD partitions on "41000000.nand":
[ 1.126464] 0x000000000000-0x000000e00000 : "boot"
[ 1.133388] 0x000000e00000-0x000008000000 : "data"
[ 1.140879] oxnas-gmac 40400000.ethernet: no reset control found
[ 1.146885] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 1.151956] Ring mode enabled
[ 1.154995] DMA HW capability register supported
[ 1.159498] Enhanced/Alternate descriptors
[ 1.163852] Enabled extended descriptors
[ 1.167841] RX Checksum Offload Engine supported (type 2)
[ 1.173317] TX Checksum insertion supported
[ 1.177564] Wake-Up On Lan supported
[ 1.181222] Enable RX Mitigation via HW Watchdog Timer
[ 1.189212] libphy: stmmac: probed
[ 1.192732] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[ 1.199144] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[ 1.205944] PPP generic driver version 2.4.2
[ 1.210693] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.217203] ehci-pci: EHCI PCI platform driver
[ 1.222248] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 1.227755] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 1.235668] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[ 1.260003] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 1.266368] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.273177] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.280394] usb usb1: Product: EHCI Host Controller
[ 1.285250] usb usb1: Manufacturer: Linux 4.4.201-oxnas-tld-1 ehci_hcd
[ 1.291776] usb usb1: SerialNumber: 40200100.ehci
[ 1.297454] hub 1-0:1.0: USB hub found
[ 1.301355] hub 1-0:1.0: 2 ports detected
[ 1.306467] usbcore: registered new interface driver cdc_wdm
[ 1.312412] usbcore: registered new interface driver usb-storage
[ 1.318574] usbcore: registered new interface driver usbserial
[ 1.324574] usbcore: registered new interface driver usbserial_generic
[ 1.331176] usbserial: USB Serial support registered for generic
[ 1.337620] mousedev: PS/2 mouse device common for all mice
[ 1.343452] i2c /dev entries driver
[ 1.348203] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.353966] usbcore: registered new interface driver usbhid
[ 1.359528] usbhid: USB HID core driver
[ 1.365455] NET: Registered protocol family 10
[ 1.371412] sit: IPv6 over IPv4 tunneling driver
[ 1.377064] NET: Registered protocol family 17
[ 1.381729] Key type dns_resolver registered
[ 1.387430] registered taskstats version 1
[ 1.391628] Loading compiled-in X.509 certificates
[ 1.396528] zswap: loaded using pool lzo/zbud
[ 1.403553] Key type encrypted registered
[ 1.408419] ubi0: attaching mtd1
[ 1.490165] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.545976] ata1.00: HPA detected: current 156299375, native 156301488
[ 1.552527] ata1.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133
[ 1.558077] ata1.00: 156299375 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.558760] ubi0: scanning is finished
[ 1.558927] ubi0 error: ubi_read_volume_table: the layout volume was not found
[ 1.559815] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd1, error -22
[ 1.559910] UBI error: cannot attach mtd1
[ 1.559910] hctosys: unable to open rtc device (rtc0)
[ 1.620951] ata1.00: configured for UDMA/133
[ 1.640442] scsi 0:0:0:0: Direct-Access ATA ST380815AS C PQ: 0 ANSI: 5
[ 1.649994] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.658818] sd 0:0:0:0: [sda] Write Protect is off
[ 1.663918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.694561] sda: sda1 sda2 sda3
[ 1.700759] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.730631] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.738316] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 1.760652] devtmpfs: mounted
[ 1.764206] Freeing unused kernel memory: 220K
INIT: version 2.93 booting
[info] Using makefile-style concurrent boot in runlevel S.
ERROR: could not open /proc/stat: No such file or directory
findfs: unable to resolve 'LABEL=rootfs'
[....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232
[ 3.780807] random: systemd-udevd: uninitialized urandom read (16 bytes read, 49 bits of entropy available)
[ 3.814502] random: systemd-udevd: uninitialized urandom read (16 bytes read, 51 bits of entropy available)
[ 3.826268] random: systemd-udevd: uninitialized urandom read (16 bytes read, 51 bits of entropy available)
.
[ 3.838113] random: systemd-udevd: uninitialized urandom read (16 bytes read, 51 bits of entropy available)
[....] Synthesizing the initial hotplug events...[ 3.907031] random: udevadm: uninitialized urandom read (16 bytes read, 55 bits of entropy available)
[ 3.919531] random: udevadm: uninitialized urandom read (16 bytes read, 55 bits of entropy available)
[ 3.929187] random: udevadm: uninitialized urandom read (16 bytes read, 55 bits of entropy available)
[ 3.940298] random: udevadm: uninitialized urandom read (16 bytes read, 55 bits of entropy available)
[ 3.958284] random: udevadm: uninitialized urandom read (16 bytes read, 55 bits of entropy available)
[ 3.969315] random: udevadm: uninitialized urandom read (16 bytes read, 55 bits of entropy available)
done.
[ ok ] Waiting for /dev to be fully populated...done.
[ ok ] Activating swap...done.
[ 6.307937] EXT4-fs (sda2): re-mounted. Opts: (null)
[....] Checking root file system...fsck from util-linux 2.29.2
rootfs: clean, 15509/262144 files, 194184/1048576 blocks
done.
[ 6.683537] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[....] Checking file systems...fsck from util-linux 2.29.2
done.
[ ok ] Cleaning up temporary files... /tmp.
[ 8.294374] random: nonblocking pool is initialized
[ ok ] Loading kernel modules...done.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5
Copyright 2004-2016 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/eth0/74:f0:6d:6a:1d:17
Sending on LPF/eth0/74:f0:6d:6a:1d:17
Sending on Socket/fallback
DHCPREQUEST of 192.168.3.193 on eth0 to 255.255.255.255 port 67
[ 12.670307] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
DHCPREQUEST of 192.168.3.193 on eth0 to 255.255.255.255 port 67
DHCPACK of 192.168.3.193 from 192.168.3.1
bound to 192.168.3.193 -- renewal in 18827 seconds.
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1136 (syslogd)
. ok
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1163 (klogd)
. ok
[ ok ] Starting system message bus: dbus.
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[ ok ] Starting NFS common utilities: statd idmapd.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting NTP server: ntpd.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
Debian GNU/Linux 10 debian ttyS0
debian login: root
Password:
Last login: Sun May 24 12:52:16 PDT 2020 on ttyS0
Linux debian 4.4.201-oxnas-tld-1 #1 SMP PREEMPT Fri Nov 15 04:12:45 PST 2019 armv6l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 24, 2020 04:24PM |
Admin Registered: 13 years ago Posts: 18,548 |
sakatgg,
Remember that when you run the direct SATA booting, you have 2 partitions. Your sda2 is your rootfs partition, your sda1 is your boot partition (This is the normal set up for this SATA booting).
So check the 1st partition:
If you see the spl, u-boot, uImage, and uInitrd files here, then every time you install new kernel, you need to copy the uImage, uInitrd, and DTB files from the rootfs /boot to this sda1 partition.
I did not see you doing that in the steps above.
And post the entire boot log here if you cannot boot successfully.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Quote
Executed commands - error "Kernel panic - not syncing" remained
cd /boot
tar -xjf linux-4.14.176-oxnas-tld-1.bodhi.tar.bz2
tar -xf linux-dtb-4.14.176-oxnas-tld-2.tar
apt-get remove flash-kernel
dpkg -i linux-image-4.14.176-oxnas-tld-1_1.0_armel.deb
mkimage -A arm -O linux -T kernel -C none -a 0x60008000 -e 0x60008000 -n Linux-4.14.176-oxnas-tld-1 -d vmlinuz-4.14.176-oxnas-tld-1 uImage
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x60000000 -e 0x60000000 -n initramfs-4.14.176-oxnas-tld-1 -d initrd.img-4.14.176-oxnas-tld-1 uInitrd
fw_setenv dtb_file '/boot/dts/ox820-pogoplug-classic.dtb'
Remember that when you run the direct SATA booting, you have 2 partitions. Your sda2 is your rootfs partition, your sda1 is your boot partition (This is the normal set up for this SATA booting).
So check the 1st partition:
mkdir -p /tmp/sda1 mount /dev/sda1 /tmp/sda1 ls -latr /tmp/sda1 ls -latr /tmp/sda/boot
If you see the spl, u-boot, uImage, and uInitrd files here, then every time you install new kernel, you need to copy the uImage, uInitrd, and DTB files from the rootfs /boot to this sda1 partition.
I did not see you doing that in the steps above.
And post the entire boot log here if you cannot boot successfully.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 24, 2020 05:12PM |
Registered: 6 years ago Posts: 32 |
Actual installer script did the markup for sata schnee script
sda1 - u-boot.img u-boot.env
sda2 in /boot - uImage, uInitrd
Up to linux-4.4.201-oxnas-tld-1.bodhi.tar.bz2 everything works
Install and work fine:
linux-4.4.89-oxnas-tld-1.bodh.tar.bz2
linux-4.4.189-oxnas-tld-1.bodh.tar.bz2
linux-4.4.201-oxnas-tld-1.bodh.tar.bz2
Edited 3 time(s). Last edit at 05/24/2020 05:23PM by sakatgg.
sda1 - u-boot.img u-boot.env
sda2 in /boot - uImage, uInitrd
root@debian:~# mkdir -p /tmp/sda1 root@debian:~# mount /dev/sda1 /tmp/sda1 root@debian:~# ls -latr /tmp/sda1 total 534 drwxr-xr-x 2 root root 16384 Dec 31 1969 . -rwxr-xr-x 1 root root 513492 Jan 6 2019 u-boot.img -rwxr-xr-x 1 root root 16384 Jan 6 2019 u-boot.env drwxrwxrwt 3 root root 60 May 24 14:47 .. root@debian:~# ls -latr /tmp/sda/boot ls: cannot access '/tmp/sda/boot': No such file or directory root@debian:~#
Up to linux-4.4.201-oxnas-tld-1.bodhi.tar.bz2 everything works
Install and work fine:
linux-4.4.89-oxnas-tld-1.bodh.tar.bz2
linux-4.4.189-oxnas-tld-1.bodh.tar.bz2
linux-4.4.201-oxnas-tld-1.bodh.tar.bz2
Edited 3 time(s). Last edit at 05/24/2020 05:23PM by sakatgg.
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 24, 2020 05:23PM |
Admin Registered: 13 years ago Posts: 18,548 |
That script was just for the 1st boot.
See that you uImage is old, it needs to be replaced with the new uImage for kernel 4.14 you just generated.
Unless schee's script did more than setting for the first boot, the kernel files need to be where u-boot is (sda1).
And as always, it is best that you post the entire boot log here if you cannot boot successfully. It will be faster to troubleshoot since we are likely in a different time zone.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 05/24/2020 05:25PM by bodhi.
See that you uImage is old, it needs to be replaced with the new uImage for kernel 4.14 you just generated.
-rwxr-xr-x 1 root root 513492 Jan 6 2019 u-boot.img
Unless schee's script did more than setting for the first boot, the kernel files need to be where u-boot is (sda1).
And as always, it is best that you post the entire boot log here if you cannot boot successfully. It will be faster to troubleshoot since we are likely in a different time zone.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 05/24/2020 05:25PM by bodhi.
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 24, 2020 05:57PM |
Registered: 6 years ago Posts: 32 |
Quote
the kernel files need to be where u-boot is (sda1).
The 4.4.x kernels load normally and the loader finds uImage and uInitrd (in sda2 /boot)
The kernels also start 4.14.x, that is, they find normally uImage and uInitrd, an error already appears in the process
Quote
See that you uImage is old, it needs to be replaced with the new uImage for kernel 4.14 you just generated.
It says above that this command was executed.
mkimage -A arm -O linux -T kernel -C none -a 0x60008000 -e 0x60008000 -n Linux-4.14.176-oxnas-tld-1 -d vmlinuz-4.14.176-oxnas-tld-1 uImage mkimage -A arm -O linux -T ramdisk -C gzip -a 0x60000000 -e 0x60000000 -n initramfs-4.14.176-oxnas-tld-1 -d initrd.img-4.14.176-oxnas-tld-1 uInitrd
The logs above laid out the normal kernel load 4.4.x and kernel load 4.14.x with an error. What other logs are needed?
The full log with an error was immediately posted in 1 post Kernel panic - not syncing. In the 2nd post, you again asked to post it again, posted here in the 3rd post
Edited 6 time(s). Last edit at 05/24/2020 06:27PM by sakatgg.
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 24, 2020 09:14PM |
Admin Registered: 13 years ago Posts: 18,548 |
sakatgg,
> The full log with an error was immediately posted in 1 post
> Kernel panic - not syncing.
The uImage in the above boot attempt was not a good uImage. It has the DTB embedded inside. The uImage should be a plain one, which is created by the command:
So you should recreate this uImage and making sure that you boot with it. That's why I asked to see the new boot log if after doing that and you still cannot boot.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 05/24/2020 10:42PM by bodhi.
> The full log with an error was immediately posted in 1 post
> Kernel panic - not syncing.
The uImage in the above boot attempt was not a good uImage. It has the DTB embedded inside. The uImage should be a plain one, which is created by the command:
mkimage -A arm -O linux -T kernel -C none -a 0x60008000 -e 0x60008000 -n Linux-4.14.176-oxnas-tld-1 -d vmlinuz-4.14.176-oxnas-tld-1 uImage
So you should recreate this uImage and making sure that you boot with it. That's why I asked to see the new boot log if after doing that and you still cannot boot.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 05/24/2020 10:42PM by bodhi.
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 25, 2020 07:17AM |
Registered: 6 years ago Posts: 32 |
In kernels 4.4.x for ox820-pogoplug-classic.dts there is a command, directly indicating where rootf is located
linux-4.4.89-oxnas-tld-1.patch
In kernels 4.14.x this is not
linux-4.14.176-oxnas-tld-1.patch
The kernel does not find rootfs in my case, which is the reason for Kernel panic - not syncing
Edited 2 time(s). Last edit at 05/25/2020 07:27AM by sakatgg.
linux-4.4.89-oxnas-tld-1.patch
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda2 rootfstype=ext4 ubi.mtd=data,512";
In kernels 4.14.x this is not
linux-4.14.176-oxnas-tld-1.patch
+ bootargs = "earlyprintk";
The kernel does not find rootfs in my case, which is the reason for Kernel panic - not syncing
Edited 2 time(s). Last edit at 05/25/2020 07:27AM by sakatgg.
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 25, 2020 03:11PM |
Registered: 6 years ago Posts: 32 |
Replaced line 974 in your linux-4.14.180-oxnas-tld-1.patch
Added boot options
Compiled by the new kernel itself
Loading ok
+ bootargs = "earlyprintk";
Added boot options
+ bootargs = "earlyprintk root=/dev/sda2 rootfstype=ext4";
Compiled by the new kernel itself
Loading ok
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12)
Boot device: SATA
Attempting to set PLLA to 800 MHz ...
plla_ctrl0 : 0000030a
plla_ctrl1 : 00400000
plla_ctrl2 : 007f0068
plla_ctrl3 : 00000193
PLLA Set
Bus 0: OK
Device 0:
reading bootargs.bin
reading u-boot.img
reading u-boot.img
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS
DRAM: 128 MiB
IDE: Bus 0: OK
Device 0: Model: ST380815AS Firm: 3.AAC Ser#: 6QZ0M5Y2
Type: Hard Disk
Supports 48-bit addressing
Capacity: 76318.0 MB = 74.5 GB (156299375 x 512)
NAND: 256 MiB
reading u-boot.env
In: serial
Out: serial
Err: serial
Net: mii0
## Error: "safeboot" not defined
Hit any key to stop autoboot: 0
4620168 bytes read in 716 ms (6.2 MiB/s)
8924 bytes read in 39 ms (222.7 KiB/s)
magic: 0xd00dfeed
totalsize: 0x22dc (8924)
off_dt_struct: 0x38
off_dt_strings: 0x1fb8
off_mem_rsvmap: 0x28
version: 17
last_comp_version: 16
boot_cpuid_phys: 0x0
size_dt_strings: 0x324
size_dt_struct: 0x1f80
number mem_rsv: 0x0
## Booting kernel from Legacy Image at 60000000 ...
Image Name: Linux-4.14.180-oxnas-oxnas-tld-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4620104 Bytes = 4.4 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 61000000
Booting using the fdt blob at 0x61000000
Loading Kernel Image ... OK
Loading Device Tree to 67e26000, end 67e2b2db ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180-oxnas-oxnas-tld-1 (admin@runtu) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9)) #1 SMP PREEMPT Mon May 25 19:37:15 MSK 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Pogoplug V3 Classic
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] random: get_random_bytes called from start_kernel+0x84/0x3f8 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s29548 r8192 d23700 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: earlyprintk root=/dev/sda2 rootfstype=ext4
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 119032K/131072K available (7168K kernel code, 199K rwdata, 1520K rodata, 1024K init, 246K bss, 12040K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b31f40 ( 200 kB)
[ 0.000000] .bss : 0xc0b38318 - 0xc0b75c38 ( 247 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ c8804000, 32 irqs, parent IRQ: 16
[ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.008166] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.018897] timer_oxnas_rps: Registered clocksource rate 390625Hz
[ 0.025054] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500
[ 0.033587] GIC: PPI13 is secure or misconfigured
[ 0.038394] GIC: PPI13 is secure or misconfigured
[ 0.043328] Console: colour dummy device 80x30
[ 0.047841] console [tty0] enabled
[ 0.051379] bootconsole [earlycon0] disabled
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180-oxnas-oxnas-tld-1 (admin@runtu) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9)) #1 SMP PREEMPT Mon May 25 19:37:15 MSK 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Pogoplug V3 Classic
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] random: get_random_bytes called from start_kernel+0x84/0x3f8 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s29548 r8192 d23700 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: earlyprintk root=/dev/sda2 rootfstype=ext4
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 119032K/131072K available (7168K kernel code, 199K rwdata, 1520K rodata, 1024K init, 246K bss, 12040K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b31f40 ( 200 kB)
[ 0.000000] .bss : 0xc0b38318 - 0xc0b75c38 ( 247 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ c8804000, 32 irqs, parent IRQ: 16
[ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.008166] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.018897] timer_oxnas_rps: Registered clocksource rate 390625Hz
[ 0.025054] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500
[ 0.033587] GIC: PPI13 is secure or misconfigured
[ 0.038394] GIC: PPI13 is secure or misconfigured
[ 0.043328] Console: colour dummy device 80x30
[ 0.047841] console [tty0] enabled
[ 0.051379] bootconsole [earlycon0] disabled
[ 0.055756] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440)
[ 0.098513] pid_max: default: 32768 minimum: 301
[ 0.098810] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.098856] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.099850] CPU: Testing write buffer coherency: ok
[ 0.138557] Setting up static identity map for 0x60100000 - 0x60100038
[ 0.158453] Hierarchical SRCU implementation.
[ 0.198456] smp: Bringing up secondary CPUs ...
[ 0.268569] GIC: PPI13 is secure or misconfigured
[ 0.328768] smp: Brought up 1 node, 2 CPUs
[ 0.328834] SMP: Total of 2 processors activated (638.97 BogoMIPS).
[ 0.329635] devtmpfs: initialized
[ 0.335592] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.335654] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.336033] prandom: seed boundary self test passed
[ 0.340510] prandom: 100 self tests passed
[ 0.340541] pinctrl core: initialized pinctrl subsystem
[ 0.341324] NET: Registered protocol family 16
[ 0.343006] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.346293] cpuidle: using governor ladder
[ 0.346385] cpuidle: using governor menu
[ 0.366973] vgaarb: loaded
[ 0.367567] SCSI subsystem initialized
[ 0.368337] usbcore: registered new interface driver usbfs
[ 0.368583] usbcore: registered new interface driver hub
[ 0.368785] usbcore: registered new device driver usb
[ 0.369003] pps_core: LinuxPPS API ver. 1 registered
[ 0.369049] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.369118] PTP clock support registered
[ 0.370352] clocksource: Switched to clocksource oxnas_rps_clocksource_timer
[ 0.388825] NET: Registered protocol family 2
[ 0.389849] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.389931] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.389992] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.390200] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.390279] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.390722] NET: Registered protocol family 1
[ 0.391498] RPC: Registered named UNIX socket transport module.
[ 0.391552] RPC: Registered udp transport module.
[ 0.391582] RPC: Registered tcp transport module.
[ 0.391613] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.393392] Initialise system trusted keyrings
[ 0.393492] Key type blacklist registered
[ 0.393812] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.403543] zbud: loaded
[ 0.409088] NFS: Registering the id_resolver key type
[ 0.409167] Key type id_resolver registered
[ 0.409200] Key type id_legacy registered
[ 0.409249] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.409285] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.410460] fuse init (API version 7.26)
[ 0.411640] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 0.412021] orangefs_init: module version upstream loaded
[ 2.556979] Key type asymmetric registered
[ 2.557045] Asymmetric key parser 'x509' registered
[ 2.557171] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.557224] io scheduler noop registered
[ 2.557255] io scheduler deadline registered
[ 2.557345] io scheduler cfq registered (default)
[ 2.559193] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 2.561018] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A
[ 3.135308] console [ttyS0] enabled
[ 3.151370] loop: module loaded
[ 3.156672] scsi host0: sata_oxnas
[ 3.160558] ata1: SATA max UDMA/133 irq 57
[ 3.164787] sata_oxnas: resetting SATA core
[ 3.230725] nand: Could not find valid ONFI parameter page; aborting
[ 3.237089] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
[ 3.243489] nand: Hynix NAND 256MiB 3,3V 8-bit
[ 3.247936] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 3.255549] Scanning device for bad blocks
[ 3.286530] Bad eraseblock 324 at 0x000002880000
[ 3.291230] Bad eraseblock 325 at 0x0000028a0000
[ 3.437603] 2 ofpart partitions found on MTD device 41000000.nand-controller
[ 3.444679] Creating 2 MTD partitions on "41000000.nand-controller":
[ 3.451074] 0x000000000000-0x000000e00000 : "boot"
[ 3.457738] 0x000000e00000-0x000008000000 : "data"
[ 3.466014] libphy: Fixed MDIO Bus: probed
[ 3.470686] oxnas-dwmac 40400000.ethernet: PTP uses main clock
[ 3.476538] oxnas-dwmac 40400000.ethernet: no reset control found
[ 3.550458] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 3.555527] oxnas-dwmac 40400000.ethernet: Ring mode enabled
[ 3.561244] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported
[ 3.568550] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors
[ 3.575367] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors
[ 3.582016] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported
[ 3.589324] oxnas-dwmac 40400000.ethernet: COE Type 2
[ 3.594408] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported
[ 3.601313] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported
[ 3.607580] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 3.635100] libphy: stmmac: probed
[ 3.638533] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 3.648064] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL)
[ 3.658657] PPP generic driver version 2.4.2
[ 3.663339] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.669872] ehci-pci: EHCI PCI platform driver
[ 3.690416] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.742579] ata1.00: HPA detected: current 156299375, native 156301488
[ 3.749125] ata1.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133
[ 3.754757] ata1.00: 156299375 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 3.800901] ata1.00: configured for UDMA/133
[ 3.805793] scsi 0:0:0:0: Direct-Access ATA ST380815AS C PQ: 0 ANSI: 5
[ 3.815851] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 3.823705] sd 0:0:0:0: [sda] Write Protect is off
[ 3.828733] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.857845] sda: sda1 sda2 sda3
[ 3.864273] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.880453] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 3.886018] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 3.893959] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100
[ 3.920424] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 3.926771] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.933624] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.940881] usb usb1: Product: EHCI Host Controller
[ 3.945756] usb usb1: Manufacturer: Linux 4.14.180-oxnas-oxnas-tld-1 ehci_hcd
[ 3.952916] usb usb1: SerialNumber: 40200100.ehci
[ 3.958609] hub 1-0:1.0: USB hub found
[ 3.962562] hub 1-0:1.0: 2 ports detected
[ 3.967697] usbcore: registered new interface driver cdc_wdm
[ 3.973608] usbcore: registered new interface driver usb-storage
[ 3.979776] usbcore: registered new interface driver usbserial
[ 3.985758] usbcore: registered new interface driver usbserial_generic
[ 3.992396] usbserial: USB Serial support registered for generic
[ 3.998794] mousedev: PS/2 mouse device common for all mice
[ 4.004597] i2c /dev entries driver
[ 4.009487] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.015173] usbcore: registered new interface driver usbhid
[ 4.020807] usbhid: USB HID core driver
[ 4.026196] NET: Registered protocol family 10
[ 4.032407] Segment Routing with IPv6
[ 4.036175] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.044170] NET: Registered protocol family 17
[ 4.048770] Key type dns_resolver registered
[ 4.054371] registered taskstats version 1
[ 4.058483] Loading compiled-in X.509 certificates
[ 4.063444] zswap: loaded using pool lzo/zbud
[ 4.076848] Key type big_key registered
[ 4.083540] Key type encrypted registered
[ 4.089786] hctosys: unable to open rtc device (rtc0)
[ 4.118031] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.125977] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 4.149084] devtmpfs: mounted
[ 4.153953] Freeing unused kernel memory: 1024K
INIT: version 2.93 booting
[info] Using makefile-style concurrent boot in runlevel S.
ERROR: could not open /proc/stat: No such file or directory
findfs: unable to resolve 'LABEL=rootfs'
[ 5.635230] random: fast init done
[....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232
[ 6.323276] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 6.340664] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 6.348229] random: systemd-udevd: uninitialized urandom read (16 bytes read)
.
[ ok ] Synthesizing the initial hotplug events...done.
[ ok ] Waiting for /dev to be fully populated...done.
[ ok ] Activating swap...done.
[ 9.013598] EXT4-fs (sda2): re-mounted. Opts: (null)
[....] Checking root file system...fsck from util-linux 2.29.2
rootfs: clean, 17094/262144 files, 205491/1048576 blocks
done.
[ 9.388270] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[....] Checking file systems...fsck from util-linux 2.29.2
done.
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Loading kernel modules...done.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5
Copyright 2004-2016 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
[ 13.377625] oxnas-dwmac 40400000.ethernet eth0: No phy led trigger registered for speed(-1)
[ 13.386135] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 13.400558] oxnas-dwmac 40400000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 13.412894] oxnas-dwmac 40400000.ethernet eth0: registered PTP clock
[ 13.420019] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Listening on LPF/eth0/74:f0:6d:6a:1d:17
Sending on LPF/eth0/74:f0:6d:6a:1d:17
Sending on Socket/fallback
DHCPREQUEST of 192.168.3.193 on eth0 to 255.255.255.255 port 67
[ 14.441441] oxnas-dwmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 14.449925] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
DHCPREQUEST of 192.168.3.193 on eth0 to 255.255.255.255 port 67
DHCPACK of 192.168.3.193 from 192.168.3.1
[ 20.031741] random: crng init done
[ 20.035171] random: 7 urandom warning(s) missed due to ratelimiting
bound to 192.168.3.193 -- renewal in 18773 seconds.
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1150 (syslogd)
. ok
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1177 (klogd)
. ok
[ ok ] Starting system message bus: dbus.
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[ ok ] Starting NFS common utilities: statd idmapd.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting NTP server: ntpd.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
Debian GNU/Linux 10 debian ttyS0
debian login: root
Password:
Last login: Wed Dec 31 16:00:35 PST 1969 on ttyS0
Linux debian 4.14.180-oxnas-oxnas-tld-1 #1 SMP PREEMPT Mon May 25 19:37:15 MSK 2020 armv6l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 25, 2020 04:30PM |
Admin Registered: 13 years ago Posts: 18,548 |
sakatgg,
You are doing it the wrong way!
We don't use bootargs inside the DTS. The bootargs should come from the env passed in by u-boot in the commandline.
We are loading DTB from u-boot. And that combines with the bootargs env when the kernel starts. The commandline bootargs must take precedent so that the kernel knows where the rootfs is (i.e. using root=LABEL=rootfs).
Also, the DTS has the bootarg defined to sda2, which does not work in all scenarios. You are basically tied to that and never be able to move your rootfs to a 3rd, 4rd partition, or connecting an eSATA enclosure.
=====
Just regenerate the uImage without the DTB appended to it, and make sure the bootargs is defined in u-boot envs.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
You are doing it the wrong way!
We don't use bootargs inside the DTS. The bootargs should come from the env passed in by u-boot in the commandline.
We are loading DTB from u-boot. And that combines with the bootargs env when the kernel starts. The commandline bootargs must take precedent so that the kernel knows where the rootfs is (i.e. using root=LABEL=rootfs).
Also, the DTS has the bootarg defined to sda2, which does not work in all scenarios. You are basically tied to that and never be able to move your rootfs to a 3rd, 4rd partition, or connecting an eSATA enclosure.
=====
Just regenerate the uImage without the DTB appended to it, and make sure the bootargs is defined in u-boot envs.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 25, 2020 06:51PM |
Registered: 6 years ago Posts: 32 |
Entered so
Your kernel linux-4.14.180-oxnas-tld-1.bodhi has booted
OX820 # setenv bootargs root=LABEL=rootfs root=/dev/sda2 OX820 # printenv bootargs bootargs=root=LABEL=rootfs root=/dev/sda2 OX820 # saveenv Saving Environment to FAT... writing u-boot.env done OX820 #
Your kernel linux-4.14.180-oxnas-tld-1.bodhi has booted
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12)
Boot device: SATA
Attempting to set PLLA to 800 MHz ...
plla_ctrl0 : 0000030a
plla_ctrl1 : 00400000
plla_ctrl2 : 007f0068
plla_ctrl3 : 00000193
PLLA Set
Bus 0: OK
Device 0:
reading bootargs.bin
reading u-boot.img
reading u-boot.img
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS
DRAM: 128 MiB
IDE: Bus 0: OK
Device 0: Model: ST380815AS Firm: 3.AAC Ser#: 6QZ0M5Y2
Type: Hard Disk
Supports 48-bit addressing
Capacity: 76318.0 MB = 74.5 GB (156299375 x 512)
NAND: 256 MiB
reading u-boot.env
In: serial
Out: serial
Err: serial
Net: mii0
## Error: "safeboot" not defined
Hit any key to stop autoboot: 0
4600448 bytes read in 723 ms (6.1 MiB/s)
8892 bytes read in 41 ms (210.9 KiB/s)
magic: 0xd00dfeed
totalsize: 0x22bc (8892)
off_dt_struct: 0x38
off_dt_strings: 0x1f98
off_mem_rsvmap: 0x28
version: 17
last_comp_version: 16
boot_cpuid_phys: 0x0
size_dt_strings: 0x324
size_dt_struct: 0x1f60
number mem_rsv: 0x0
## Booting kernel from Legacy Image at 60000000 ...
Image Name: Linux-4.14.180-oxnas-tld-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4600384 Bytes = 4.4 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 61000000
Booting using the fdt blob at 0x61000000
Loading Kernel Image ... OK
Loading Device Tree to 67e26000, end 67e2b2bb ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT Wed May 13 02:38:34 PDT 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Pogoplug V3 Classic
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] random: get_random_bytes called from start_kernel+0x84/0x3f8 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s29548 r8192 d23700 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: root=LABEL=rootfs root=/dev/sda2
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 119032K/131072K available (7168K kernel code, 199K rwdata, 1524K rodata, 1024K init, 245K bss, 12040K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b31f68 ( 200 kB)
[ 0.000000] .bss : 0xc0b383b8 - 0xc0b757c0 ( 246 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ c8804000, 32 irqs, parent IRQ: 16
[ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.000051] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.000066] timer_oxnas_rps: Registered clocksource rate 390625Hz
[ 0.000092] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500
[ 0.000250] GIC: PPI13 is secure or misconfigured
[ 0.000307] GIC: PPI13 is secure or misconfigured
[ 0.000486] Console: colour dummy device 80x30
[ 0.001269] console [tty0] enabled
[ 0.001323] Calibrating delay loop... 317.03 BogoMIPS (lpj=1585152)
[ 0.060275] pid_max: default: 32768 minimum: 301
[ 0.060605] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060661] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.061626] CPU: Testing write buffer coherency: ok
[ 0.100467] Setting up static identity map for 0x60100000 - 0x60100038
[ 0.120363] Hierarchical SRCU implementation.
[ 0.160366] smp: Bringing up secondary CPUs ...
[ 0.230484] GIC: PPI13 is secure or misconfigured
[ 0.290677] smp: Brought up 1 node, 2 CPUs
[ 0.290757] SMP: Total of 2 processors activated (636.51 BogoMIPS).
[ 0.291558] devtmpfs: initialized
[ 0.297287] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.297369] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.297740] prandom: seed boundary self test passed
[ 0.302330] prandom: 100 self tests passed
[ 0.302371] pinctrl core: initialized pinctrl subsystem
[ 0.303137] NET: Registered protocol family 16
[ 0.304837] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.307640] cpuidle: using governor ladder
[ 0.307750] cpuidle: using governor menu
[ 0.327260] vgaarb: loaded
[ 0.327841] SCSI subsystem initialized
[ 0.328622] usbcore: registered new interface driver usbfs
[ 0.328775] usbcore: registered new interface driver hub
[ 0.328967] usbcore: registered new device driver usb
[ 0.329198] pps_core: LinuxPPS API ver. 1 registered
[ 0.329239] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.329308] PTP clock support registered
[ 0.330437] clocksource: Switched to clocksource oxnas_rps_clocksource_timer
[ 0.347292] NET: Registered protocol family 2
[ 0.348275] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.348357] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.348421] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.348620] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.348700] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.349007] NET: Registered protocol family 1
[ 0.349772] RPC: Registered named UNIX socket transport module.
[ 0.349829] RPC: Registered udp transport module.
[ 0.349859] RPC: Registered tcp transport module.
[ 0.349888] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.351646] Initialise system trusted keyrings
[ 0.351756] Key type blacklist registered
[ 0.352071] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.359047] zbud: loaded
[ 0.363962] NFS: Registering the id_resolver key type
[ 0.364044] Key type id_resolver registered
[ 0.364075] Key type id_legacy registered
[ 0.364124] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.364160] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.365096] fuse init (API version 7.26)
[ 0.366072] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 0.366402] orangefs_init: module version upstream loaded
[ 2.447646] Key type asymmetric registered
[ 2.447708] Asymmetric key parser 'x509' registered
[ 2.447838] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.447889] io scheduler noop registered
[ 2.447918] io scheduler deadline registered
[ 2.447994] io scheduler cfq registered (default)
[ 2.449763] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 2.451502] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A
[ 3.013409] console [ttyS0] enabled
[ 3.028183] loop: module loaded
[ 3.033384] scsi host0: sata_oxnas
[ 3.037150] ata1: SATA max UDMA/133 irq 57
[ 3.041423] sata_oxnas: resetting SATA core
[ 3.110786] nand: Could not find valid ONFI parameter page; aborting
[ 3.117158] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
[ 3.123558] nand: Hynix NAND 256MiB 3,3V 8-bit
[ 3.128005] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 3.135621] Scanning device for bad blocks
[ 3.166405] Bad eraseblock 324 at 0x000002880000
[ 3.171100] Bad eraseblock 325 at 0x0000028a0000
[ 3.317227] 2 ofpart partitions found on MTD device 41000000.nand-controller
[ 3.324298] Creating 2 MTD partitions on "41000000.nand-controller":
[ 3.330693] 0x000000000000-0x000000e00000 : "boot"
[ 3.337162] 0x000000e00000-0x000008000000 : "data"
[ 3.345205] libphy: Fixed MDIO Bus: probed
[ 3.349795] oxnas-dwmac 40400000.ethernet: PTP uses main clock
[ 3.355704] oxnas-dwmac 40400000.ethernet: no reset control found
[ 3.430533] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 3.435601] oxnas-dwmac 40400000.ethernet: Ring mode enabled
[ 3.441313] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported
[ 3.448619] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors
[ 3.455429] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors
[ 3.462069] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported
[ 3.469373] oxnas-dwmac 40400000.ethernet: COE Type 2
[ 3.474449] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported
[ 3.481349] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported
[ 3.487610] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 3.504939] libphy: stmmac: probed
[ 3.508369] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 3.517898] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL)
[ 3.528424] PPP generic driver version 2.4.2
[ 3.533089] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.539622] ehci-pci: EHCI PCI platform driver
[ 3.560506] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.614315] ata1.00: HPA detected: current 156299375, native 156301488
[ 3.620910] ata1.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133
[ 3.626483] ata1.00: 156299375 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 3.672637] ata1.00: configured for UDMA/133
[ 3.677501] scsi 0:0:0:0: Direct-Access ATA ST380815AS C PQ: 0 ANSI: 5
[ 3.687221] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 3.695659] sd 0:0:0:0: [sda] Write Protect is off
[ 3.700812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.729607] sda: sda1 sda2 sda3
[ 3.735603] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.750504] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 3.756042] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 3.763960] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100
[ 3.790489] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 3.796830] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.803676] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.810936] usb usb1: Product: EHCI Host Controller
[ 3.815813] usb usb1: Manufacturer: Linux 4.14.180-oxnas-tld-1 ehci_hcd
[ 3.822453] usb usb1: SerialNumber: 40200100.ehci
[ 3.828008] hub 1-0:1.0: USB hub found
[ 3.831943] hub 1-0:1.0: 2 ports detected
[ 3.837002] usbcore: registered new interface driver cdc_wdm
[ 3.842882] usbcore: registered new interface driver usb-storage
[ 3.849067] usbcore: registered new interface driver usbserial
[ 3.855045] usbcore: registered new interface driver usbserial_generic
[ 3.861675] usbserial: USB Serial support registered for generic
[ 3.868078] mousedev: PS/2 mouse device common for all mice
[ 3.873873] i2c /dev entries driver
[ 3.878643] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.884313] usbcore: registered new interface driver usbhid
[ 3.889889] usbhid: USB HID core driver
[ 3.895127] NET: Registered protocol family 10
[ 3.901306] Segment Routing with IPv6
[ 3.905077] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.912819] NET: Registered protocol family 17
[ 3.917401] Key type dns_resolver registered
[ 3.922880] registered taskstats version 1
[ 3.926996] Loading compiled-in X.509 certificates
[ 3.931996] zswap: loaded using pool lzo/zbud
[ 3.944629] Key type big_key registered
[ 3.951280] Key type encrypted registered
[ 3.957281] hctosys: unable to open rtc device (rtc0)
[ 3.989736] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.997578] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 4.020981] devtmpfs: mounted
[ 4.025748] Freeing unused kernel memory: 1024K
INIT: version 2.93 booting
[info] Using makefile-style concurrent boot in runlevel S.
ERROR: could not open /proc/stat: No such file or directory
findfs: unable to resolve 'LABEL=rootfs'
[ 5.530170] random: fast init done
[....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232
[ 6.200893] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 6.221073] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 6.229365] random: systemd-udevd: uninitialized urandom read (16 bytes read)
.
[ ok ] Synthesizing the initial hotplug events...done.
[ ok ] Waiting for /dev to be fully populated...done.
[ ok ] Activating swap...done.
[ 8.860249] EXT4-fs (sda2): re-mounted. Opts: (null)
[....] Checking root file system...fsck from util-linux 2.29.2
rootfs: clean, 18655/262144 files, 223055/1048576 blocks
done.
[ 9.226708] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[....] Checking file systems...fsck from util-linux 2.29.2
done.
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Loading kernel modules...done.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5
Copyright 2004-2016 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
[ 13.232424] oxnas-dwmac 40400000.ethernet eth0: No phy led trigger registered for speed(-1)
[ 13.240870] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 13.255406] oxnas-dwmac 40400000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 13.264284] oxnas-dwmac 40400000.ethernet eth0: registered PTP clock
[ 13.271383] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Listening on LPF/eth0/74:f0:6d:6a:1d:17
Sending on LPF/eth0/74:f0:6d:6a:1d:17
Sending on Socket/fallback
DHCPREQUEST of 192.168.3.193 on eth0 to 255.255.255.255 port 67
[ 14.311436] oxnas-dwmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 14.319920] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
DHCPREQUEST of 192.168.3.193 on eth0 to 255.255.255.255 port 67
DHCPACK of 192.168.3.193 from 192.168.3.1
[ 21.160099] random: crng init done
[ 21.163560] random: 7 urandom warning(s) missed due to ratelimiting
bound to 192.168.3.193 -- renewal in 21049 seconds.
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1151 (syslogd)
. ok
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1178 (klogd)
. ok
[ ok ] Starting system message bus: dbus.
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[ ok ] Starting NFS common utilities: statd idmapd.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting NTP server: ntpd.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
Debian GNU/Linux 10 debian ttyS0
debian login: root
Password:
Last login: Wed Dec 31 16:00:34 PST 1969 on ttyS0
Linux debian 4.14.180-oxnas-tld-1 #1 SMP PREEMPT Wed May 13 02:38:34 PDT 2020 armv6l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 25, 2020 10:36PM |
Admin Registered: 13 years ago Posts: 18,548 |
sakatgg,
Awesome!
One more thing to change:
With that, you can move your rootfs to anywhere in the SATA disk(s) configuration. And seeing early kernel log.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Awesome!
One more thing to change:
setenv bootargs 'root=LABEL=rootfs mtdparts=41000000.nand:14m(boot),-(ubi) earlyprintk=serial'
With that, you can move your rootfs to anywhere in the SATA disk(s) configuration. And seeing early kernel log.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 26, 2020 07:25AM |
Registered: 6 years ago Posts: 32 |
setenv bootargs 'root=LABEL=rootfs mtdparts=41000000.nand:14m(boot),-(ubi) earlyprintk=serial'
So it does not load
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12)
Boot device: SATA
Attempting to set PLLA to 800 MHz ...
plla_ctrl0 : 0000030a
plla_ctrl1 : 00400000
plla_ctrl2 : 007f0068
plla_ctrl3 : 00000193
PLLA Set
Bus 0: OK
Device 0:
reading bootargs.bin
reading u-boot.img
reading u-boot.img
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS
DRAM: 128 MiB
IDE: Bus 0: OK
Device 0: Model: ST380815AS Firm: 3.AAC Ser#: 6QZ0M5Y2
Type: Hard Disk
Supports 48-bit addressing
Capacity: 76318.0 MB = 74.5 GB (156299375 x 512)
NAND: 256 MiB
reading u-boot.env
In: serial
Out: serial
Err: serial
Net: mii0
## Error: "safeboot" not defined
Hit any key to stop autoboot: 0
OX820 # setenv bootargs 'root=LABEL=rootfs mtdparts=41000000.nand:14m(boot),-(ubi) earlyprintk=serial'
OX820 # printenv bootargs
bootargs=root=LABEL=rootfs mtdparts=41000000.nand:14m(boot),-(ubi) earlyprintk=serial
OX820 # boot
4600448 bytes read in 723 ms (6.1 MiB/s)
8892 bytes read in 40 ms (216.8 KiB/s)
magic: 0xd00dfeed
totalsize: 0x22bc (8892)
off_dt_struct: 0x38
off_dt_strings: 0x1f98
off_mem_rsvmap: 0x28
version: 17
last_comp_version: 16
boot_cpuid_phys: 0x0
size_dt_strings: 0x324
size_dt_struct: 0x1f60
number mem_rsv: 0x0
## Booting kernel from Legacy Image at 60000000 ...
Image Name: Linux-4.14.180-oxnas-tld-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4600384 Bytes = 4.4 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 61000000
Booting using the fdt blob at 0x61000000
Loading Kernel Image ... OK
Loading Device Tree to 67e26000, end 67e2b2bb ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT Wed May 13 02:38:34 PDT 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Pogoplug V3 Classic
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] random: get_random_bytes called from start_kernel+0x84/0x3f8 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s29548 r8192 d23700 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: root=LABEL=rootfs mtdparts=41000000.nand:14m(boot),-(ubi) earlyprintk=serial
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 119032K/131072K available (7168K kernel code, 199K rwdata, 1524K rodata, 1024K init, 245K bss, 12040K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b31f68 ( 200 kB)
[ 0.000000] .bss : 0xc0b383b8 - 0xc0b757c0 ( 246 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ c8804000, 32 irqs, parent IRQ: 16
[ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.008171] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.018897] timer_oxnas_rps: Registered clocksource rate 390625Hz
[ 0.025057] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500
[ 0.033592] GIC: PPI13 is secure or misconfigured
[ 0.038397] GIC: PPI13 is secure or misconfigured
[ 0.043325] Console: colour dummy device 80x30
[ 0.047836] console [tty0] enabled
[ 0.051374] bootconsole [earlycon0] disabled
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT Wed May 13 02:38:34 PDT 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Pogoplug V3 Classic
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] random: get_random_bytes called from start_kernel+0x84/0x3f8 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s29548 r8192 d23700 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: root=LABEL=rootfs mtdparts=41000000.nand:14m(boot),-(ubi) earlyprintk=serial
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 119032K/131072K available (7168K kernel code, 199K rwdata, 1524K rodata, 1024K init, 245K bss, 12040K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b31f68 ( 200 kB)
[ 0.000000] .bss : 0xc0b383b8 - 0xc0b757c0 ( 246 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ c8804000, 32 irqs, parent IRQ: 16
[ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.008171] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.018897] timer_oxnas_rps: Registered clocksource rate 390625Hz
[ 0.025057] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500
[ 0.033592] GIC: PPI13 is secure or misconfigured
[ 0.038397] GIC: PPI13 is secure or misconfigured
[ 0.043325] Console: colour dummy device 80x30
[ 0.047836] console [tty0] enabled
[ 0.051374] bootconsole [earlycon0] disabled
[ 0.055749] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440)
[ 0.098524] pid_max: default: 32768 minimum: 301
[ 0.098810] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.098856] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.099811] CPU: Testing write buffer coherency: ok
[ 0.138562] Setting up static identity map for 0x60100000 - 0x60100038
[ 0.158456] Hierarchical SRCU implementation.
[ 0.198458] smp: Bringing up secondary CPUs ...
[ 0.268577] GIC: PPI13 is secure or misconfigured
[ 0.328773] smp: Brought up 1 node, 2 CPUs
[ 0.328834] SMP: Total of 2 processors activated (638.97 BogoMIPS).
[ 0.329623] devtmpfs: initialized
[ 0.335444] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.335511] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.335882] prandom: seed boundary self test passed
[ 0.340456] prandom: 100 self tests passed
[ 0.340492] pinctrl core: initialized pinctrl subsystem
[ 0.341232] NET: Registered protocol family 16
[ 0.342947] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.345525] cpuidle: using governor ladder
[ 0.345615] cpuidle: using governor menu
[ 0.364282] vgaarb: loaded
[ 0.364856] SCSI subsystem initialized
[ 0.365616] usbcore: registered new interface driver usbfs
[ 0.365747] usbcore: registered new interface driver hub
[ 0.365936] usbcore: registered new device driver usb
[ 0.366159] pps_core: LinuxPPS API ver. 1 registered
[ 0.366205] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.366272] PTP clock support registered
[ 0.367352] clocksource: Switched to clocksource oxnas_rps_clocksource_timer
[ 0.384079] NET: Registered protocol family 2
[ 0.385070] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.385149] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.385210] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.385408] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.385495] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.385797] NET: Registered protocol family 1
[ 0.386618] RPC: Registered named UNIX socket transport module.
[ 0.386675] RPC: Registered udp transport module.
[ 0.386705] RPC: Registered tcp transport module.
[ 0.386736] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.388421] Initialise system trusted keyrings
[ 0.388526] Key type blacklist registered
[ 0.388897] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.396052] zbud: loaded
[ 0.400855] NFS: Registering the id_resolver key type
[ 0.400936] Key type id_resolver registered
[ 0.400967] Key type id_legacy registered
[ 0.401011] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.401047] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.401971] fuse init (API version 7.26)
[ 0.402941] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 0.403264] orangefs_init: module version upstream loaded
[ 2.473630] Key type asymmetric registered
[ 2.473694] Asymmetric key parser 'x509' registered
[ 2.473825] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.473873] io scheduler noop registered
[ 2.473902] io scheduler deadline registered
[ 2.473986] io scheduler cfq registered (default)
[ 2.475816] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 2.477539] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A
[ 3.051683] console [ttyS0] enabled
[ 3.066513] loop: module loaded
[ 3.071633] scsi host0: sata_oxnas
[ 3.075381] ata1: SATA max UDMA/133 irq 57
[ 3.079659] sata_oxnas: resetting SATA core
[ 3.147712] nand: Could not find valid ONFI parameter page; aborting
[ 3.154078] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
[ 3.160476] nand: Hynix NAND 256MiB 3,3V 8-bit
[ 3.164925] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 3.172538] Scanning device for bad blocks
[ 3.203320] Bad eraseblock 324 at 0x000002880000
[ 3.208012] Bad eraseblock 325 at 0x0000028a0000
[ 3.355980] 2 ofpart partitions found on MTD device 41000000.nand-controller
[ 3.363059] Creating 2 MTD partitions on "41000000.nand-controller":
[ 3.369441] 0x000000000000-0x000000e00000 : "boot"
[ 3.375930] 0x000000e00000-0x000008000000 : "data"
[ 3.383992] libphy: Fixed MDIO Bus: probed
[ 3.388648] oxnas-dwmac 40400000.ethernet: PTP uses main clock
[ 3.394503] oxnas-dwmac 40400000.ethernet: no reset control found
[ 3.467461] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 3.472532] oxnas-dwmac 40400000.ethernet: Ring mode enabled
[ 3.478243] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported
[ 3.485550] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors
[ 3.492362] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors
[ 3.499005] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported
[ 3.506304] oxnas-dwmac 40400000.ethernet: COE Type 2
[ 3.511383] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported
[ 3.518282] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported
[ 3.524546] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 3.541895] libphy: stmmac: probed
[ 3.545326] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 3.554851] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL)
[ 3.565314] PPP generic driver version 2.4.2
[ 3.570001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.576535] ehci-pci: EHCI PCI platform driver
[ 3.597434] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.651409] ata1.00: HPA detected: current 156299375, native 156301488
[ 3.658007] ata1.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133
[ 3.663580] ata1.00: 156299375 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 3.709729] ata1.00: configured for UDMA/133
[ 3.724666] scsi 0:0:0:0: Direct-Access ATA ST380815AS C PQ: 0 ANSI: 5
[ 3.734809] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 3.742732] sd 0:0:0:0: [sda] Write Protect is off
[ 3.747832] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.783413] sda: sda1 sda2 sda3
[ 3.787473] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 3.793021] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 3.802864] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.807759] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100
[ 3.837411] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 3.843752] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.850647] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.857909] usb usb1: Product: EHCI Host Controller
[ 3.862786] usb usb1: Manufacturer: Linux 4.14.180-oxnas-tld-1 ehci_hcd
[ 3.869419] usb usb1: SerialNumber: 40200100.ehci
[ 3.875072] hub 1-0:1.0: USB hub found
[ 3.878970] hub 1-0:1.0: 2 ports detected
[ 3.884049] usbcore: registered new interface driver cdc_wdm
[ 3.889948] usbcore: registered new interface driver usb-storage
[ 3.896125] usbcore: registered new interface driver usbserial
[ 3.902072] usbcore: registered new interface driver usbserial_generic
[ 3.908702] usbserial: USB Serial support registered for generic
[ 3.915095] mousedev: PS/2 mouse device common for all mice
[ 3.920860] i2c /dev entries driver
[ 3.925639] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.931374] usbcore: registered new interface driver usbhid
[ 3.936952] usbhid: USB HID core driver
[ 3.942384] NET: Registered protocol family 10
[ 3.948467] Segment Routing with IPv6
[ 3.952238] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.960079] NET: Registered protocol family 17
[ 3.964656] Key type dns_resolver registered
[ 3.970329] registered taskstats version 1
[ 3.974440] Loading compiled-in X.509 certificates
[ 3.979404] zswap: loaded using pool lzo/zbud
[ 3.992066] Key type big_key registered
[ 3.998766] Key type encrypted registered
[ 4.005058] hctosys: unable to open rtc device (rtc0)
[ 4.011056] VFS: Cannot open root device "LABEL=rootfs" or unknown-block(0,0): error -6
[ 4.019159] Please append a correct "root=" boot option; here are the available partitions:
[ 4.027586] 1f00 14336 mtdblock0
[ 4.027596] (driver?)
[ 4.034132] 1f01 116736 mtdblock1
[ 4.034140] (driver?)
[ 4.040760] 0800 78149687 sda
[ 4.040768] driver: sd
[ 4.046863] 0801 16384 sda1 00008000-01
[ 4.046868]
[ 4.053276] 0802 4194304 sda2 00008000-02
[ 4.053281]
[ 4.059706] 0803 73937975 sda3 00008000-03
[ 4.059714]
[ 4.066068] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 4.074324] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.180-oxnas-tld-1 #1
[ 4.081438] Hardware name: Generic DT based system
[ 4.086246] [<c01095b0>] (unwind_backtrace) from [<c01053bc>] (show_stack+0x10/0x14)
[ 4.093998] [<c01053bc>] (show_stack) from [<c07384cc>] (dump_stack+0xb4/0xd0)
[ 4.101222] [<c07384cc>] (dump_stack) from [<c0111b88>] (panic+0xec/0x268)
[ 4.108103] [<c0111b88>] (panic) from [<c0a012bc>] (mount_block_root+0x1e0/0x2a8)
[ 4.115589] [<c0a012bc>] (mount_block_root) from [<c0a0146c>] (mount_root+0xe8/0x128)
[ 4.123412] [<c0a0146c>] (mount_root) from [<c0a015dc>] (prepare_namespace+0x130/0x194)
[ 4.131409] [<c0a015dc>] (prepare_namespace) from [<c0a00e5c>] (kernel_init_freeable+0x17c/0x1c4)
[ 4.140275] [<c0a00e5c>] (kernel_init_freeable) from [<c074b198>] (kernel_init+0x8/0x110)
[ 4.148446] [<c074b198>] (kernel_init) from [<c01029b8>] (ret_from_fork+0x14/0x3c)
[ 4.156014] CPU0: stopping
[ 4.158743] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.180-oxnas-tld-1 #1
[ 4.165862] Hardware name: Generic DT based system
[ 4.170664] [<c01095b0>] (unwind_backtrace) from [<c01053bc>] (show_stack+0x10/0x14)
[ 4.178411] [<c01053bc>] (show_stack) from [<c07384cc>] (dump_stack+0xb4/0xd0)
[ 4.185635] [<c07384cc>] (dump_stack) from [<c01082a8>] (handle_IPI+0x190/0x1dc)
[ 4.193034] [<c01082a8>] (handle_IPI) from [<c01014c8>] (gic_handle_irq+0x7c/0x8c)
[ 4.200601] [<c01014c8>] (gic_handle_irq) from [<c0106278>] (__irq_svc+0x58/0x8c)
[ 4.208069] Exception stack(0xc0b01f28 to 0xc0b01f70)
[ 4.213114] 1f20: 00000001 00000000 00000000 00000000 00000000 ffffe000
[ 4.221281] 1f40: c0b03ae4 c0b03a88 00000000 00000000 c0a39e68 c08f607c 00000000 c0b01f78
[ 4.229442] 1f60: c0103278 c010327c 60000013 ffffffff
[ 4.234493] [<c0106278>] (__irq_svc) from [<c010327c>] (arch_cpu_idle+0x28/0x30)
[ 4.241891] [<c010327c>] (arch_cpu_idle) from [<c0149f5c>] (do_idle+0x180/0x1d4)
[ 4.249287] [<c0149f5c>] (do_idle) from [<c014a270>] (cpu_startup_entry+0x18/0x1c)
[ 4.256857] [<c014a270>] (cpu_startup_entry) from [<c0a00c50>] (start_kernel+0x368/0x3f8)
[ 4.265031] [<c0a00c50>] (start_kernel) from [<60008074>] (0x60008074)
[ 4.271559] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Your kernel normally loads the only way
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12)
Boot device: SATA
Attempting to set PLLA to 800 MHz ...
plla_ctrl0 : 0000030a
plla_ctrl1 : 00400000
plla_ctrl2 : 007f0068
plla_ctrl3 : 00000193
PLLA Set
Bus 0: OK
Device 0:
reading bootargs.bin
reading u-boot.img
reading u-boot.img
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS
DRAM: 128 MiB
IDE: Bus 0: OK
Device 0: Model: ST380815AS Firm: 3.AAC Ser#: 6QZ0M5Y2
Type: Hard Disk
Supports 48-bit addressing
Capacity: 76318.0 MB = 74.5 GB (156299375 x 512)
NAND: 256 MiB
reading u-boot.env
In: serial
Out: serial
Err: serial
Net: mii0
## Error: "safeboot" not defined
Hit any key to stop autoboot: 0
OX820 # printenv
SET_dtb=fdt addr ${fdtaddr} ; fdt header
autoload=no
baudrate=115200
bootargs=root=LABEL=rootfs root=/dev/sda2
bootcmd=run ideboot
bootdelay=3
bootnew=bootm 60000000 - 61000000
bootold=bootm 60000000
console=console=ttyS0,115200n8
ethact=mii0
ethaddr=74:F0:6D:6A:1D:17
ext2_dtb=ext2load ide 0:2 61000000 /boot/dts/ox820-pogoplug-classic.dtb
ext2_ideboot=run ext2_uimage ; run ext2_dtb ; run SET_dtb ; run bootnew
ext2_uimage=ext2load ide 0:2 60000000 /boot/uImage
ext4_dtb=ext4load ide 0:2 61000000 /boot/dts/ox820-pogoplug-classic.dtb
ext4_ideboot=run ext4_uimage ; run ext4_dtb ; run SET_dtb ; run bootnew
ext4_uimage=ext4load ide 0:2 60000000 /boot/uImage
fdtaddr=61000000
filesize=1b79
ideboot=run ext4_ideboot
idebootold=${loadold} ;${bootold}
imgaddr=60000000
ipaddr=10.0.0.71
keypressed=1
mtdids=nand0=41000000.nand
mtdparts=mtdparts=41000000.nand:14m(boot),-(data)
netcon=echo switch to net console;setenv stderr nc;setenv stdin nc;setenv stdout nc;echo switch to net console
preboot=run safeboot
serialcon=echo switch to serial console;setenv stderr serial;setenv stdin serial;setenv stdout serial;echo switch to serial console
stderr=serial
stdin=serial
stdout=serial
updboot=bootp;tftp 60000000 u-boot.img;ide write 60000000 400 400
Environment size: 1311/16380 bytes
OX820 #
Edited 1 time(s). Last edit at 05/26/2020 07:34AM by sakatgg.
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 26, 2020 07:23PM |
Admin Registered: 13 years ago Posts: 18,548 |
sakatgg,
It is because in the bootargs
So put the label on sda2
sync and reboot.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
It is because in the bootargs
setenv bootargs 'root=LABEL=rootfs mtdparts=41000000.nand:14m(boot),-(ubi) earlyprintk=serial'We tell the kernel to look for the rootfs partition with label rootfs. This rootfs could be any where we want.
So put the label on sda2
e2label /dev/sda2 rootfs
sync and reboot.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 26, 2020 08:24PM |
Registered: 6 years ago Posts: 32 |
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 26, 2020 08:42PM |
Admin Registered: 13 years ago Posts: 18,548 |
sakatgg Wrote:
-------------------------------------------------------
> sections have a label, that’s not the reason
>
> sda1 boot
> sda2 rootfs
> sda3 home
Check your /etc/fstab. The root device should be:
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
-------------------------------------------------------
> sections have a label, that’s not the reason
>
> sda1 boot
> sda2 rootfs
> sda3 home
Check your /etc/fstab. The root device should be:
LABEL=rootfs / # so on with whatever remained in this line
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 26, 2020 10:25PM |
Registered: 6 years ago Posts: 32 |
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 26, 2020 11:27PM |
Admin Registered: 13 years ago Posts: 18,548 |
Ah. You need to load uInitrd to be able to use the labeled rootfs.
Looks like your envs are too primitive. For now, this will boot the kernel files from 2nd partition. And then the rootfs could be resilient.
But it is not totally robust yet. Later, see the envs I have for the latest u-boot release: uboot.2015.10-tld-2.ox820.environment
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
## Booting kernel from Legacy Image at 60000000 ... Image Name: Linux-4.14.180-oxnas-tld-1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4600384 Bytes = 4.4 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 61000000 Booting using the fdt blob at 0x61000000 Loading Kernel Image ... OK Loading Device Tree to 67e26000, end 67e2b2bb ... OK
Looks like your envs are too primitive. For now, this will boot the kernel files from 2nd partition. And then the rootfs could be resilient.
setenv ext4_ideboot 'run ext4_uimage ; run ext4_uinitrd; run ext4_dtb; bootm 0x60500000 0x60e00000 0x62c00000' setenv ext4_uimage 'ext4load ide 0:2 0x60500000 /boot/uImage' setenv ext4_uinitrd 'ext4load ide 0:2 0x60e00000 /boot/uInitrd setenv ext4_dtb 'ext4load ide 0:2 0x62c00000 /boot/dts/ox820-pogoplug-classic.dtb'and then
boot
But it is not totally robust yet. Later, see the envs I have for the latest u-boot release: uboot.2015.10-tld-2.ox820.environment
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 28, 2020 03:32PM |
Registered: 6 years ago Posts: 32 |
bodhi, thanks, I will try.
Load normal OpenWrt SNAPSHOT, ARM OpenWrt Linux-5.4.42 on IconBIT IS608 (Oxnas OX820, Pogoplug V3) directly from sata-hdd, without the participation of Nand and usb devices
1. Build Openwrt SNAPSHOT from source
Include in make kernel_menuconfig
Device Drivers
<*> Serial ATA and Parallel ATA drivers (libata) --->
<*> PLXTECH NAS782X SATA support
Device Drivers > SCSI device support
<*> SCSI disk support
<*> SCSI generic support
File systems
<*> The Extended 4 (ext4) filesystem
make menuconfig
> Target Images -> [*] tar.gz
ox820-cloudengines-pogoplug-series-3.dts
2. Compile
3. Sata hdd installer script for sata schnee script
sda2 Label rootfs, delete everything from sda partition
Include in unzip rootfs, example
tar -xvzf openwrt-oxnas-ox820-cloudengines_pogoplug-series-3-rootfs.tar.gz -C /media/admin/rootfs
sda2 /boot
openwrt-oxnas-ox820-cloudengines_pogoplug-series-3-initramfs-uImage -> uInitrd
openwrt-oxnas-ox820-cloudengines_pogoplug-series-3-uImage -> uImage
sda2 /boot/dts/ox820-cloudengines-pogoplug-series-3.dts
/etc/fstab
4. Insert hdd into NAS, turn on
Edited 21 time(s). Last edit at 05/30/2020 10:57AM by sakatgg.
Load normal OpenWrt SNAPSHOT, ARM OpenWrt Linux-5.4.42 on IconBIT IS608 (Oxnas OX820, Pogoplug V3) directly from sata-hdd, without the participation of Nand and usb devices
1. Build Openwrt SNAPSHOT from source
git clone https://git.openwrt.org/openwrt/openwrt.git Openwrt-snapshot-5.4
Include in make kernel_menuconfig
Device Drivers
<*> Serial ATA and Parallel ATA drivers (libata) --->
<*> PLXTECH NAS782X SATA support
Device Drivers > SCSI device support
<*> SCSI disk support
<*> SCSI generic support
File systems
<*> The Extended 4 (ext4) filesystem
make menuconfig
> Target Images -> [*] tar.gz
ox820-cloudengines-pogoplug-series-3.dts
bootargs= "earlyprintk console=ttyS0,115200 root=/dev/sda2 rootfstype=ext4";
2. Compile
3. Sata hdd installer script for sata schnee script
sda2 Label rootfs, delete everything from sda partition
Include in unzip rootfs, example
tar -xvzf openwrt-oxnas-ox820-cloudengines_pogoplug-series-3-rootfs.tar.gz -C /media/admin/rootfs
sda2 /boot
openwrt-oxnas-ox820-cloudengines_pogoplug-series-3-initramfs-uImage -> uInitrd
openwrt-oxnas-ox820-cloudengines_pogoplug-series-3-uImage -> uImage
sda2 /boot/dts/ox820-cloudengines-pogoplug-series-3.dts
/etc/fstab
LABEL=rootfs / ext4 noatime,errors=remount-ro 0 1
4. Insert hdd into NAS, turn on
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12)
Boot device: SATA
Attempting to set PLLA to 800 MHz ...
plla_ctrl0 : 0000030a
plla_ctrl1 : 00400000
plla_ctrl2 : 007f0068
plla_ctrl3 : 00000193
PLLA Set
Bus 0: OK
Device 0:
reading bootargs.bin
reading u-boot.img
reading u-boot.img
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS
DRAM: 128 MiB
IDE: Bus 0: OK
Device 0: Model: ST380815AS Firm: 3.AAC Ser#: 6QZ0M5Y2
Type: Hard Disk
Supports 48-bit addressing
Capacity: 76318.0 MB = 74.5 GB (156299375 x 512)
NAND: 256 MiB
reading u-boot.env
In: serial
Out: serial
Err: serial
Net: mii0
## Error: "safeboot" not defined
Hit any key to stop autoboot: 0
3754342 bytes read in 607 ms (5.9 MiB/s)
8982 bytes read in 47 ms (186.5 KiB/s)
magic: 0xd00dfeed
totalsize: 0x2316 (8982)
off_dt_struct: 0x38
off_dt_strings: 0x1fc8
off_mem_rsvmap: 0x28
version: 17
last_comp_version: 16
boot_cpuid_phys: 0x0
size_dt_strings: 0x34e
size_dt_struct: 0x1f90
number mem_rsv: 0x0
## Booting kernel from Legacy Image at 60000000 ...
Image Name: ARM OpenWrt Linux-5.4.42
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3754278 Bytes = 3.6 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 61000000
Booting using the fdt blob at 0x61000000
Loading Kernel Image ... OK
Loading Device Tree to 67e26000, end 67e2b315 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.42 (admin@runtu) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13374-2b92ee3)) #0 SMP Wed May 27 22:48:39 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Cloud Engines PogoPlug Series 3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 64 MiB at 0x64000000
[ 0.000000] percpu: Embedded 15 pages/cpu s29644 r8192 d23604 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
[ 0.000000] Kernel command line: earlyprintk console=ttyS0,115200 root=/dev/sda2 rootfstype=ext4
[ 0.000000] Bootloader command line not present
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 54368K/131072K available (6144K kernel code, 169K rwdata, 1364K rodata, 1024K init, 208K bss, 11168K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 32 irqs, parent IRQ: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x2c0/0x4ec with crng_init=0
[ 0.000020] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.000066] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.000081] timer_oxnas_rps: Registered clocksource rate 390625Hz
[ 0.000102] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500
[ 0.000258] GIC: PPI13 is secure or misconfigured
[ 0.000307] GIC: PPI13 is secure or misconfigured
[ 0.000394] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440)
[ 0.050403] pid_max: default: 32768 minimum: 301
[ 0.050711] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.050731] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.052032] CPU: Testing write buffer coherency: ok
[ 0.053821] Setting up static identity map for 0x60100000 - 0x6010005c
[ 0.054085] rcu: Hierarchical SRCU implementation.
[ 0.054714] smp: Bringing up secondary CPUs ...
[ 0.055677] GIC: PPI13 is secure or misconfigured
[ 0.110650] smp: Brought up 1 node, 2 CPUs
[ 0.110681] SMP: Total of 2 processors activated (638.97 BogoMIPS).
[ 0.115955] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.115988] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.122257] pinctrl core: initialized pinctrl subsystem
[ 0.123005] NET: Registered protocol family 16
[ 0.127155] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.129246] cpuidle: using governor menu
[ 0.129379] No ATAGs?
[ 0.154393] SCSI subsystem initialized
[ 0.155046] pps_core: LinuxPPS API ver. 1 registered
[ 0.155061] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.155097] PTP clock support registered
[ 0.156200] clocksource: Switched to clocksource oxnas_rps_clocksource_timer
[ 0.157591] thermal_sys: Registered thermal governor 'step_wise'
[ 0.157964] NET: Registered protocol family 2
[ 0.158755] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.158827] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.158863] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.158899] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.159057] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.159111] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.159503] NET: Registered protocol family 1
[ 0.159554] PCI: CLS 0 bytes, default 32
[ 0.161292] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[ 0.173181] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.176552] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.178140] printk: console [ttyS0] disabled
[ 0.178293] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A
[ 0.609538] printk: console [ttyS0] enabled
[ 0.629383] brd: module loaded
[ 0.642900] loop: module loaded
[ 0.647923] scsi host0: sata_oxnas
[ 0.651837] ata1: SATA max UDMA/133 irq 57
[ 0.656360] sata_oxnas: resetting SATA core
[ 0.726507] Could not find a valid ONFI parameter page, trying bit-wise majority to recover it
[ 0.735157] ONFI parameter recovery failed, aborting
[ 0.740154] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
[ 0.746516] nand: Hynix NAND 256MiB 3,3V 8-bit
[ 0.750945] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.758520] Scanning device for bad blocks
[ 0.789184] Bad eraseblock 324 at 0x000002880000
[ 0.793820] Bad eraseblock 325 at 0x0000028a0000
[ 0.939107] 5 fixed-partitions partitions found on MTD device 41000000.nand-controller
[ 0.947020] Creating 5 MTD partitions on "41000000.nand-controller":
[ 0.953349] 0x000000000000-0x000000040000 : "stage1"
[ 0.959874] 0x000000040000-0x0000003c0000 : "u-boot"
[ 0.966517] 0x0000003c0000-0x000000440000 : "u-boot-env"
[ 0.973345] 0x000000440000-0x000000e00000 : "kernel"
[ 0.980021] 0x000000e00000-0x000008000000 : "ubi"
[ 0.987384] libphy: Fixed MDIO Bus: probed
[ 0.992256] oxnas-dwmac 40400000.ethernet: IRQ eth_lpi not found
[ 0.998425] oxnas-dwmac 40400000.ethernet: PTP uses main clock
[ 1.004239] oxnas-dwmac 40400000.ethernet: no reset control found
[ 1.076579] oxnas-dwmac 40400000.ethernet: User ID: 0x12, Synopsys ID: 0x35
[ 1.083525] oxnas-dwmac 40400000.ethernet: DWMAC1000
[ 1.088611] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported
[ 1.095887] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported
[ 1.103196] oxnas-dwmac 40400000.ethernet: COE Type 2
[ 1.108249] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported
[ 1.115092] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported
[ 1.121400] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors
[ 1.128217] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors
[ 1.134799] oxnas-dwmac 40400000.ethernet: Ring mode enabled
[ 1.140469] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.148308] oxnas-dwmac 40400000.ethernet: device MAC address 5e:46:c2:b0:d4:82
[ 1.165698] libphy: stmmac: probed
[ 1.166251] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.169164] RTL8211DN Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 1.187947] RTL8211DN Gigabit Ethernet stmmac-0:03: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:03, irq=POLL)
[ 1.202703] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.210416] NET: Registered protocol family 10
[ 1.216504] Segment Routing with IPv6
[ 1.220252] NET: Registered protocol family 17
[ 1.230978] UBI error: no valid UBI magic found inside mtd4
[ 1.238389] ata1.00: HPA detected: current 156299375, native 156301488
[ 1.244904] ata1.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133
[ 1.250506] ata1.00: 156299375 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.296721] ata1.00: configured for UDMA/133
[ 1.301644] scsi 0:0:0:0: Direct-Access ATA ST380815AS C PQ: 0 ANSI: 5
[ 1.311121] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.311726] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.324272] sd 0:0:0:0: [sda] Write Protect is off
[ 1.329341] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.361781] sda: sda1 sda2 sda3
[ 1.367667] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.397363] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.405063] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 1.413314] Freeing unused kernel memory: 1024K
[ 1.436456] Run /sbin/init as init process
[ 1.614824] init: Console is alive
[ 1.642490] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 1.674007] usbcore: registered new interface driver usbfs
[ 1.679646] usbcore: registered new interface driver hub
[ 1.685058] usbcore: registered new device driver usb
[ 1.691916] Button Hotplug driver version 0.4.1
[ 1.699399] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.710981] ehci-fsl: Freescale EHCI Host controller driver
[ 1.717785] ehci-platform: EHCI generic platform driver
[ 1.936225] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 1.941736] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 1.950013] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100
[ 1.976220] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 1.983301] hub 1-0:1.0: USB hub found
[ 1.987215] hub 1-0:1.0: 2 ports detected
[ 1.995148] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.013352] init: - preinit -
[ 2.407692] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.452428] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.488204] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.521262] oxnas-dwmac 40400000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211DN Gigabit Ethernet]
[ 2.532267] oxnas-dwmac 40400000.ethernet eth0: No Safety Features support found
[ 2.539729] oxnas-dwmac 40400000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 2.548375] oxnas-dwmac 40400000.ethernet eth0: registered PTP clock
[ 2.554718] oxnas-dwmac 40400000.ethernet eth0: configuring for phy/rgmii link mode
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 6.752483] mount_root: mounting /dev/root
[ 6.775790] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 6.781122] mount_root: loading kmods from internal overlay
[ 6.798865] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 6.808153] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 7.369858] block: attempting to load /etc/config/fstab
[ 7.400844] block: extroot: not configured
[ 7.408488] urandom-seed: Seeding with /etc/urandom.seed
[ 7.481310] procd: - early -
[ 8.046589] procd: - ubus -
[ 8.214054] urandom_read: 1 callbacks suppressed
[ 8.214067] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.225707] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.232291] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.240145] procd: - init -
Please press Enter to activate this console.
[ 8.871971] urngd: v1.0.2 started.
[ 8.927398] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.984870] random: crng init done
[ 8.988331] random: 3 urandom warning(s) missed due to ratelimiting
[ 8.996247] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.226414] oxnas-dwmac 40400000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211DN Gigabit Ethernet]
[ 12.256307] oxnas-dwmac 40400000.ethernet eth0: No Safety Features support found
[ 12.263782] oxnas-dwmac 40400000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 12.272460] oxnas-dwmac 40400000.ethernet eth0: registered PTP clock
[ 12.278865] oxnas-dwmac 40400000.ethernet eth0: configuring for phy/rgmii link mode
[ 12.297850] br-lan: port 1(eth0) entered blocking state
[ 12.303088] br-lan: port 1(eth0) entered disabled state
[ 12.308825] device eth0 entered promiscuous mode
[ 16.486766] oxnas-dwmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 16.495211] br-lan: port 1(eth0) entered blocking state
[ 16.500495] br-lan: port 1(eth0) entered forwarding state
[ 16.507558] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
BusyBox v1.31.1 () built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r13374-2b92ee3
-----------------------------------------------------
root@OpenWrt:/#
Edited 21 time(s). Last edit at 05/30/2020 10:57AM by sakatgg.
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 29, 2020 03:36PM |
Registered: 6 years ago Posts: 32 |
With your setenv, ARM OpenWrt Linux-5.4.42 stopped starting, with the old settings it started normally, see the previous post.
ARM OpenWrt Linux-5.4.42 and Debian started normally on old settings
Edited 1 time(s). Last edit at 05/29/2020 03:43PM by sakatgg.
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12)
Boot device: SATA
Attempting to set PLLA to 800 MHz ...
plla_ctrl0 : 0000030a
plla_ctrl1 : 00400000
plla_ctrl2 : 007f0068
plla_ctrl3 : 00000193
PLLA Set
Bus 0: OK
Device 0:
reading bootargs.bin
reading u-boot.img
reading u-boot.img
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS
DRAM: 128 MiB
IDE: Bus 0: OK
Device 0: Model: ST380815AS Firm: 3.AAC Ser#: 6QZ0M5Y2
Type: Hard Disk
Supports 48-bit addressing
Capacity: 76318.0 MB = 74.5 GB (156299375 x 512)
NAND: 256 MiB
reading u-boot.env
In: serial
Out: serial
Err: serial
Net: mii0
## Error: "safeboot" not defined
Hit any key to stop autoboot: 0
3754342 bytes read in 599 ms (6 MiB/s)
6130758 bytes read in 947 ms (6.2 MiB/s)
8982 bytes read in 48 ms (182.6 KiB/s)
## Booting kernel from Legacy Image at 60500000 ...
Image Name: ARM OpenWrt Linux-5.4.42
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3754278 Bytes = 3.6 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 60e00000 ...
Image Name: ARM OpenWrt Linux-5.4.42
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 6130694 Bytes = 5.8 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
No Linux ARM Ramdisk Image
Ramdisk image is corrupt or invalid
OX820 # printenv
SET_dtb=fdt addr ${fdtaddr} ; fdt header
autoload=no
baudrate=115200
bootargs=root=LABEL=rootfs root=/dev/sda2
bootcmd=run ideboot
bootdelay=3
bootnew=bootm 60000000 - 61000000
bootold=bootm 60000000
console=console=ttyS0,115200n8
ethact=mii0
ethaddr=74:F0:6D:6A:1D:17
ext4_dtb=ext4load ide 0:2 0x62c00000 /boot/dts/ox820-pogoplug-classic.dtb
ext4_ideboot=run ext4_uimage ; run ext4_uinitrd; run ext4_dtb; bootm 0x60500000 0x60e00000 0x62c00000
ext4_uimage=ext4load ide 0:2 0x60500000 /boot/uImage
ext4_uinitrd=ext4load ide 0:2 0x60e00000 /boot/uInitrd
fdtaddr=61000000
filesize=2316
ideboot=run ext4_ideboot
idebootold=${loadold} ;${bootold}
imgaddr=60000000
ipaddr=10.0.0.71
keypressed=1
mtdids=nand0=41000000.nand
mtdparts=mtdparts=41000000.nand:14m(boot),-(data)
netcon=echo switch to net console;setenv stderr nc;setenv stdin nc;setenv stdout nc;echo switch to net console
preboot=run safeboot
serialcon=echo switch to serial console;setenv stderr serial;setenv stdin serial;setenv stdout serial;echo switch to serial console
stderr=serial
stdin=serial
stdout=serial
updboot=bootp;tftp 60000000 u-boot.img;ide write 60000000 400 400
Environment size: 1201/16380 bytes
OX820 #
ARM OpenWrt Linux-5.4.42 and Debian started normally on old settings
setenv ext4_ideboot 'run ext4_uimage ; run ext4_dtb ; run SET_dtb ; run bootnew' setenv ext4_uimage 'ext4load ide 0:2 60000000 /boot/uImage' setenv ext4_dtb 'ext4load ide 0:2 61000000 /boot/dts/ox820-pogoplug-classic.dtb'
Edited 1 time(s). Last edit at 05/29/2020 03:43PM by sakatgg.
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 29, 2020 08:54PM |
Registered: 6 years ago Posts: 32 |
Hi, bodhi.
On ARM OpenWrt Linux-5.4.42, the same problem with the MAC, tell me what needs to be changed to solve the problem?
Made a patch
Problem still exists :(
Maybe something needs to be included in make kernel_menuconfig?
Edited 3 time(s). Last edit at 05/29/2020 09:01PM by sakatgg.
Quote
The new DTBs fix the SATA problem with Pogo Pro, and also enable the kernel to use the MAC address passed by u-boot to bring up network (fixed the problem with the MAC address generated randomly by the kernel)
On ARM OpenWrt Linux-5.4.42, the same problem with the MAC, tell me what needs to be changed to solve the problem?
Made a patch
--- a/arch/arm/boot/dts/ox820.dtsi 2020-05-29 22:26:20.216313000 +0300 +++ b/arch/arm/boot/dts/ox820.dtsi 2020-05-30 02:15:29.045576000 +0300 @@ -93,7 +93,6 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ phy-mode = "rgmii"; clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
Problem still exists :(
Maybe something needs to be included in make kernel_menuconfig?
Edited 3 time(s). Last edit at 05/29/2020 09:01PM by sakatgg.
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 29, 2020 11:19PM |
Admin Registered: 13 years ago Posts: 18,548 |
sakatgg,
I have not got around to send this patch to Neil Armstrong. It's a one-line change which should be in all OX820 DTS files. For this box:
arch/arm/boot/dts/ox820-pogoplug-classic.dts
You should have seen this if you downloaded my kernel release tarball linux-4.14.180-oxnas-tld-1.bodhi.tar.bz2 in the release thread:
https://forum.doozan.com/read.php?2,16044
In the patch file linux-4.14.180-oxnas-tld-1.patch
The ethernet alias should be set as in the bold line above.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
I have not got around to send this patch to Neil Armstrong. It's a one-line change which should be in all OX820 DTS files. For this box:
arch/arm/boot/dts/ox820-pogoplug-classic.dts
You should have seen this if you downloaded my kernel release tarball linux-4.14.180-oxnas-tld-1.bodhi.tar.bz2 in the release thread:
https://forum.doozan.com/read.php?2,16044
In the patch file linux-4.14.180-oxnas-tld-1.patch
diff -Naur --no-dereference a/arch/arm/boot/dts/ox820-pogoplug-classic.dts b/arch/arm/boot/dts/ox820-pogoplug-classic.dts
.......
+ aliases {
+ ethernet0 = ða;
+ serial0 = &uart0;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ };
The ethernet alias should be set as in the bold line above.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 30, 2020 08:48PM |
Registered: 6 years ago Posts: 32 |
Quote
The ethernet alias should be set as in the bold line above.
--- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts 2020-05-30 03:19:08.975612000 +0300
+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts 2020-05-30 18:19:58.000000000 +0300
@@ -24,6 +24,7 @@
};
aliases {
+ ethernet0 = ða;
serial0 = &uart0;
gpio0 = &gpio0;
gpio1 = &gpio1;
I made a patch (with make clean), it did not affect the result, the MAC is also generated by the kernel. These two patches, one at a time and together, do not affect the bug.
Edited 1 time(s). Last edit at 05/30/2020 08:51PM by sakatgg.
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 30, 2020 09:34PM |
Admin Registered: 13 years ago Posts: 18,548 |
sakatgg,
Check your ethaddr:
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Check your ethaddr:
printenv ethaddrIt should show your box real MAC address. If it is not, then set it
setenv ethaddr xxxxx
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 30, 2020 10:54PM |
Registered: 6 years ago Posts: 32 |
|
Re: IconBIT IS608 Oxnas OX820 booting problem with kernel 4.14.x May 30, 2020 11:31PM |
Admin Registered: 13 years ago Posts: 18,548 |
Power up, interrupt serial console and
Log into Debian,
If the disk has 2 partitions then the /boot and /boot/dts above should be listed twice, once for 1st partition where the boot files are, once for 2nd partition where the rootfs is.
And post the entire serial console log (from power up until the last line on the screen) here.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 05/30/2020 11:32PM by bodhi.
printenv boot
Log into Debian,
fw_printenv ls -lart /boot ls -lart /boot/dts
If the disk has 2 partitions then the /boot and /boot/dts above should be listed twice, once for 1st partition where the boot files are, once for 2nd partition where the rootfs is.
And post the entire serial console log (from power up until the last line on the screen) here.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 05/30/2020 11:32PM by bodhi.
