Re: Debian installation on Netgear RN102 August 27, 2020 01:50AM |
Registered: 7 years ago Posts: 192 |
Marvell>> printenv eth1addr eth1addr=12:34:56:78:90:AB Marvell>>After booting Debian and logging in:
ifconfig eth0 eth0 Link encap:Ethernet HWaddr 12:34:56:78:90:ab UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:532 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:26As well as for setting the default 'hostname':
cat /etc/hostname nas-78-90-AB
Re: Debian on Netgear RN102 August 28, 2020 03:17AM |
Registered: 7 years ago Posts: 192 |
/tmp/bodhi md5sum * ffe6bb6a1d591b06be1f3a55273bc236 armada-370-netgear-rn102.dtb ffa864878dd797241c0bea05d563239a Debian-5.2.9-mvebu-tld-1-rootfs-bodhi.tar.bz2 8cf3d08dee09d000cf8b50b2df2f4047 linux-4.20.6-mvebu-mirabox-tld-12-bodhi.tar.bz2
sudo systemctl stop udisks2.service sudo gparted
sudo su - lsblk mount /dev/sda1 /mnt cd /mnt tar xf /tmp/bodhi/Debian-5.2.9-mvebu-tld-1-rootfs-bodhi.tar.bz2 ls -alF total 96 drwxrwxrwx 21 root root 4096 jan. 20 2017 ./ drwxr-xr-x 20 root root 4096 aug. 21 12:35 ../ drwxr-xr-x 2 root root 4096 aug. 26 2019 bin/ drwxr-xr-x 3 root root 4096 sep. 5 2019 boot/ drwxr-xr-x 4 root root 4096 jan. 2 2017 dev/ drwxr-xr-x 70 root root 4096 sep. 5 2019 etc/ drwxr-xr-x 2 root root 4096 sep. 12 2016 home/ drwxr-xr-x 13 root root 4096 aug. 26 2019 lib/ drwx------ 2 root root 16384 jan. 9 2017 lost+found/ drwxr-xr-x 2 root root 4096 jan. 20 2017 media/ drwxr-xr-x 2 root root 4096 jan. 2 2017 mnt/ drwxr-xr-x 2 root root 4096 jan. 2 2017 opt/ drwxr-xr-x 2 root root 4096 sep. 12 2016 proc/ drwx------ 5 root root 4096 sep. 10 2019 root/ drwxr-xr-x 8 root root 4096 aug. 25 2019 run/ drwxr-xr-x 2 root root 4096 aug. 26 2019 sbin/ drwxr-xr-x 2 root root 4096 jan. 2 2017 srv/ drwxr-xr-x 2 root root 4096 april 6 2015 sys/ drwxrwxrwt 2 root root 4096 sep. 5 2019 tmp/ drwxr-xr-x 10 root root 4096 jan. 2 2017 usr/ drwxr-xr-x 11 root root 4096 jan. 2 2017 var/ mkdir usr/src/mirabox && cd usr/src/mirabox tar xf /tmp/bodhi/linux-4.20.6-mvebu-mirabox-tld-12-bodhi.tar.bz2 ls -alF total 34204 drwxr-xr-x 2 root root 4096 aug. 28 08:03 ./ drwxr-xr-x 3 root root 4096 aug. 28 08:03 ../ -rw-r--r-- 1 root root 174254 mars 13 2019 config-4.20.6-mvebu-mirabox-tld-12 -rw-r--r-- 1 root root 67443 feb. 7 2019 linux-4.20.6-mvebu-tld-1.patch -rw-r--r-- 1 root root 921600 mars 13 2019 linux-dtb-4.20.6-mvebu-mirabox-tld-12.tar -rw-r--r-- 1 root root 9431996 mars 13 2019 linux-headers-4.20.6-mvebu-mirabox-tld-12_12.0_armhf.deb -rw-r--r-- 1 root root 20292840 mars 13 2019 linux-image-4.20.6-mvebu-mirabox-tld-12_12.0_armhf.deb -rwxr-xr-x 1 root root 4062176 mars 13 2019 zImage-4.20.6-mvebu-mirabox-tld-12* mkdir dts cp -a /tmp/bodhi/armada-370-netgear-rn102.dt? dts/ cat dts/armada-370-netgear-rn102.dtb >> zImage.fdt mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.20.6-mvebu-mirabox-tld-12 -d zImage.fdt uImage Image Name: Linux-4.20.6-mvebu-mirabox-tld-1 Created: Fri Aug 28 08:09:11 2020 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4076820 Bytes = 3981.27 KiB = 3.89 MiB Load Address: 00008000 Entry Point: 00008000 cp -a uImage ../../../boot/ ls -alF ../../../boot/ total 50272 drwxr-xr-x 3 root root 4096 aug. 28 08:10 ./ drwxrwxrwx 21 root root 4096 jan. 20 2017 ../ -rw-r--r-- 1 root root 183639 aug. 19 2019 config-5.2.9-mvebu-tld-1 drwxr-xr-x 2 root root 4096 aug. 20 2019 dts/ -rw-r--r-- 1 root root 9488554 aug. 26 2019 initrd.img-5.2.9-mvebu-tld-1 -rw-r--r-- 1 root root 9676808 aug. 19 2019 linux-headers-5.2.9-mvebu-tld-1_1.0_armhf.deb -rw------- 1 root root 3266081 aug. 19 2019 System.map-5.2.9-mvebu-tld-1 -rw-r--r-- 1 root root 4076884 aug. 28 08:09 uImage -rw-r--r-- 1 root root 9488618 aug. 26 2019 uInitrd -rw------- 1 root root 5057632 aug. 19 2019 vmlinuz-5.2.9-mvebu-tld-1 -rwxr-xr-x 1 root root 5057632 aug. 19 2019 zImage* -rwxr-xr-x 1 root root 5057632 aug. 19 2019 zImage-5.2.9-mvebu-tld-1*
cd ../../../etc cp -a fw_env.config fw_env.config.orig /bin/sh cat <<EOF > fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 0x00000 0x20000 0x20000 EOF exit:TIDE
sync cd umount /mnt exit
BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0001 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Successfully BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xf1ad) 128 MiB MMC: MRVL_MMC: 0 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 nand_read_bbt: Bad block at 0x000001820000 nand_read_bbt: Bad block at 0x000001f00000 Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] Power supply plug on, please press power button! BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0000 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Successfully BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xf1ad) 128 MiB MMC: MRVL_MMC: 0 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 nand_read_bbt: Bad block at 0x000001820000 nand_read_bbt: Bad block at 0x000001f00000 Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] Power On! FDT loaded successfully Hit any key to stop autoboot: 0 Marvell>> printenv AC_Power_fail_detect=open CASset=min HW_version=MVT MALLOC_len=5 Manufacturer=NETGEAR Product=ReadyNAS 102 SKUNum=RN102 SerialNum=MASKERAD Startup=Normal UUID=31774368-b4c7-11e2-bfbc-28c68e347394 Version=V1.0 autoload=no bootargs=console=ttyS0,115200 bootargs_end=:10.4.50.254:255.255.255.0:KW40:eth0:none bootargs_root=root=/dev/nfs rw bootcmd=usb start; run usb_bootcmd; usb stop; reset bootcmd_fdt=tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $mtdparts $bootargs_root nfsroot=$se rverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.l cd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr; bootcmd_ubi=ubi part ubifs; ubifsmount rootfs; ubifsload 0x2000000 kernel; ubifsload 0x3000000 initrd.gz; bootm 0x2000000 0x3000000 0x1000000 bootdelay=3 cacheShare=no console=console=ttyS0,115200 disL2Cache=yes disaMvPnp=no eeeEnable=no enaAutoRecovery=yes enaClockGating=yes enaExtDisk=no enaFPU=no enaMonExt=no enaWrAllo=no envver=3 eth1addr=MASKERAD eth1mtu=1500 ethact=egiga1 ethaddr=MASKERAD ethmtu=1500 ethprime=egiga1 fdt_skip_update=yes fdtaddr=0x1000000 fdtfile=armada-370-db.dtb image_name=uImage initrd_name=uInitrd load_addr=0x02000000 load_uimage=ext2load usb 0:1 0x2000000 /boot/uImage load_uinitrd=ext2load usb 0:1 0x3000000 /boot/uInitrd loadaddr=0x02000000 mtdids=nand0=armada-nand mtdparts=mtdparts=pxa3xx_nand-0:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x400000@0x800000(miniroo tfs),-(ubifs) mvNetConfig=mv_net_config=1,(MASKERAD,0:1:2:3:4),mtu=1500 mv_pon_addr=MASKERAD nandEcc=1bit netbsd_en=no netretry=no pcieTune=no pexMode=rc pxe_files_load=:default.arm-armada370-db:default.arm-armadaxp:default.arm pxefile_addr_r=3100000 rcvrip=169.254.100.100 sata_delay_reset=0 sata_dma_mode=yes setL2CacheWT=no standalone=fsload $load_addr $image_name;setenv bootargs $console $mtdparts root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_en d; bootm $load_addr; stderr=serial stdin=serial stdout=serial usb0Mode=host usb1Mode=host usb2Mode=device usbActive=0 usb_boot=run load_uimage; if run load_uinitrd; then bootm 0x2000000 0x3000000; else bootm 0x2000000; fi usb_bootcmd=run usb_set_bootargs; run usb_boot usb_set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts earlyprintk=serial vxworks_en=no yuk_ethaddr=MASKERAD Environment size: 2606/131068 bytes Marvell>> boot (Re)start USB... USB: Active port: 0 Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Loading file "/boot/uImage" from usb device 0:1 (usbda1) 4076884 bytes read Loading file "/boot/uInitrd" from usb device 0:1 (usbda1) 9488618 bytes read ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux-4.20.6-mvebu-mirabox-tld-1 Created: 2020-08-28 6:09:11 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4076820 Bytes = 3.9 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: initramfs-5.2.9-mvebu-tld-1 Created: 2019-08-26 11:03:27 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 9488554 Bytes = 9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.20.6-mvebu-mirabox-tld-12 (root@tldDebianVM) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-27ubuntu1~18.04 )) #6 SMP PREEMPT Wed Mar 13 14:43:16 PDT 2019 [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NETGEAR ReadyNAS 102 [ 0.000000] printk: bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] random: get_random_bytes called from start_kernel+0x78/0x4c4 with crng_init=0 [ 0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s41548 r8192 d23988 u73728 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=pxa3xx_nand-0:0x180000@0(u-boot),0 x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x400000@0x800000(minirootfs),-(ubifs) earlyprintk=serial mtdparts=pxa3xx_nan d-0:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x400000@0x800000(minirootfs),-(ubifs) reason=normal bdtype=rn102 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 497004K/524288K available (8192K kernel code, 731K rwdata, 2072K rodata, 1024K init, 320K bss, 27284K reserv ed, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (9184 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 732 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 321 kB) [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C: DT/platform modifies aux control register: 0x12086300 -> 0x1a086302 [ 0.000000] Aurora cache controller enabled, 4 ways, 256 kB [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302 [ 0.000000] Switching to timer-based delay loop, resolution 53ns [ 0.000007] sched_clock: 32 bits at 18MHz, resolution 53ns, wraps every 114537122277ns [ 0.007239] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 101938038664 ns [ 0.018006] Console: colour dummy device 80x30 [ 0.022089] Calibrating delay loop (skipped), value calculated using timer frequency.. 37.49 BogoMIPS (lpj=187492) [ 0.031582] pid_max: default: 32768 minimum: 301 [ 0.035961] LSM: Security Framework initializing [ 0.040288] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.046331] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.053616] CPU: Testing write buffer coherency: ok [ 0.058437] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.117366] Setting up static identity map for 0x100000 - 0x100060 [ 0.123336] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1 [ 0.128189] mvebu-pmsu: Initializing Power Management Service Unit [ 0.147298] rcu: Hierarchical SRCU implementation. [ 0.187300] smp: Bringing up secondary CPUs ... [ 0.191445] smp: Brought up 1 node, 1 CPU [ 0.195104] SMP: Total of 1 processors activated (37.49 BogoMIPS). [ 0.200777] CPU: All CPU(s) started in SVC mode. [ 0.205794] devtmpfs: initialized [ 0.217546] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 0.225100] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.234395] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.240287] prandom: seed boundary self test passed [ 0.247182] prandom: 100 self tests passed [ 0.251100] pinctrl core: initialized pinctrl subsystem [ 0.258038] NET: Registered protocol family 16 [ 0.262845] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.270408] audit: initializing netlink subsys (disabled) [ 0.275663] audit: type=2000 audit(0.250:1): state=initialized audit_enabled=0 res=1 [ 0.284723] cpuidle: using governor ladder [ 0.289668] cpuidle: using governor menu [ 0.293507] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.388344] vgaarb: loaded [ 0.391143] SCSI subsystem initialized [ 0.398072] usbcore: registered new interface driver usbfs [ 0.403131] usbcore: registered new interface driver hub [ 0.409503] usbcore: registered new device driver usb [ 0.415235] pps_core: LinuxPPS API ver. 1 registered [ 0.420346] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.428931] PTP clock support registered [ 0.435076] clocksource: Switched to clocksource armada_370_xp_clocksource [ 0.496240] VFS: Disk quotas dquot_6.6.0 [ 0.499901] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.531299] NET: Registered protocol family 2 [ 0.537182] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.544189] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.551029] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.557118] TCP: Hash tables configured (established 4096 bind 4096) [ 0.563045] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.568451] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.574380] NET: Registered protocol family 1 [ 0.609265] RPC: Registered named UNIX socket transport module. [ 0.614674] RPC: Registered udp transport module. [ 0.619058] RPC: Registered tcp transport module. [ 0.623352] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.629476] Unpacking initramfs... [ 1.141558] Freeing initrd memory: 9268K [ 1.145497] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.151803] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.162445] Initialise system trusted keyrings [ 1.168007] Key type blacklist registered [ 1.171887] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.178022] zbud: loaded [ 1.191314] NFS: Registering the id_resolver key type [ 1.196171] Key type id_resolver registered [ 1.199991] Key type id_legacy registered [ 1.203661] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.209874] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.556510] Key type asymmetric registered [ 1.560259] Asymmetric key parser 'x509' registered [ 1.565237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.572001] io scheduler noop registered [ 1.575734] io scheduler deadline registered [ 1.579676] io scheduler cfq registered (default) [ 1.586642] armada-370-pinctrl d0018000.pin-ctrl: registered pinctrl driver [ 1.601521] mvebu-pcie soc:pcie@82000000: PCI host bridge to bus 0000:00 [ 1.608175] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.613189] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff] [ 1.619794] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 1.627682] PCI: bus0: Fast back to back transfers disabled [ 1.632783] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.640431] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.648667] pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring [ 1.686176] PCI: bus1: Fast back to back transfers disabled [ 1.692139] pci 0000:00:02.0: ASPM: current common clock configuration is broken, reconfiguring [ 1.726202] PCI: bus2: Fast back to back transfers disabled [ 1.731390] pci 0000:00:01.0: BAR 14: assigned [mem 0xf8000000-0xf80fffff] [ 1.737745] pci 0000:00:01.0: BAR 15: assigned [mem 0xf8100000-0xf81fffff pref] [ 1.744420] pci 0000:00:02.0: BAR 14: assigned [mem 0xf8200000-0xf82fffff] [ 1.750744] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff] [ 1.756590] pci 0000:00:01.0: BAR 6: assigned [mem 0xf8300000-0xf83007ff pref] [ 1.763187] pci 0000:00:02.0: BAR 6: assigned [mem 0xf8400000-0xf84007ff pref] [ 1.769808] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8100000-0xf810ffff pref] [ 1.776421] pci 0000:01:00.0: BAR 5: assigned [mem 0xf8000000-0xf80001ff] [ 1.782622] pci 0000:01:00.0: BAR 4: assigned [io 0x10000-0x1000f] [ 1.788364] pci 0000:01:00.0: BAR 0: assigned [io 0x10010-0x10017] [ 1.794088] pci 0000:01:00.0: BAR 2: assigned [io 0x10018-0x1001f] [ 1.799829] pci 0000:01:00.0: BAR 1: assigned [io 0x10020-0x10023] [ 1.805570] pci 0000:01:00.0: BAR 3: assigned [io 0x10024-0x10027] [ 1.811294] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.815845] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff] [ 1.821570] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff] [ 1.827784] pci 0000:00:01.0: bridge window [mem 0xf8100000-0xf81fffff pref] [ 1.834384] pci 0000:02:00.0: BAR 0: assigned [mem 0xf8200000-0xf820ffff 64bit] [ 1.841082] pci 0000:02:00.0: BAR 2: assigned [mem 0xf8210000-0xf8210fff 64bit] [ 1.847779] pci 0000:02:00.0: BAR 4: assigned [mem 0xf8211000-0xf8211fff 64bit] [ 1.854458] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.859009] pci 0000:00:02.0: bridge window [mem 0xf8200000-0xf82fffff] [ 1.865342] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 1.871191] pcieport 0000:00:02.0: enabling device (0140 -> 0142) [ 1.878141] mv_xor d0060800.xor: Marvell shared XOR driver [ 1.946208] mv_xor d0060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.953362] mv_xor d0060900.xor: Marvell shared XOR driver [ 2.016198] mv_xor d0060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 2.186552] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.195790] printk: console [ttyS0] disabled [ 2.220957] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 19, base_baud = 12500000) is a 16550A [ 2.229376] printk: console [ttyS0] enabled [ 2.229376] printk: console [ttyS0] enabled [ 2.237135] printk: bootconsole [earlycon0] disabled [ 2.237135] printk: bootconsole [earlycon0] disabled [ 2.248229] ahci 0000:01:00.0: enabling device (0146 -> 0147) [ 2.253766] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.262036] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.282435] scsi host0: ahci [ 2.296303] scsi host1: ahci [ 2.299418] ata1: SATA max UDMA/133 abar m512@0xf8000000 port 0xf8000100 irq 42 [ 2.306518] ata2: SATA max UDMA/133 abar m512@0xf8000000 port 0xf8000180 irq 42 [ 2.314182] sata_mv d00a0000.sata: slots 32 ports 1 [ 2.330031] scsi host2: sata_mv [ 2.333374] ata3: SATA max UDMA/133 irq 27 [ 2.338907] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 2.344767] nand: Hynix H27U1G8F2BTR-BC [ 2.348521] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.356233] Bad block table found at page 65472, version 0x01 [ 2.361836] Bad block table found at page 65408, version 0x01 [ 2.367976] nand_read_bbt: bad block at 0x000001820000 [ 2.372715] nand_read_bbt: bad block at 0x000001f00000 [ 2.377580] 5 cmdlinepart partitions found on MTD device pxa3xx_nand-0 [ 2.383593] Creating 5 MTD partitions on "pxa3xx_nand-0": [ 2.388662] 0x000000000000-0x000000180000 : "u-boot" [ 2.394967] 0x000000180000-0x0000001a0000 : "u-boot-env" [ 2.402169] 0x000000200000-0x000000800000 : "uImage" [ 2.408961] 0x000000800000-0x000000c00000 : "minirootfs" [ 2.416027] 0x000000c00000-0x000008000000 : "ubifs" [ 2.427770] libphy: Fixed MDIO Bus: probed [ 2.435986] libphy: orion_mdio_bus: probed [ 2.454518] mvneta d0074000.ethernet eth0: Using random mac address 92:bd:58:46:1f:64 [ 2.466166] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.472215] ehci-pci: EHCI PCI platform driver [ 2.477206] ehci-orion: EHCI orion driver [ 2.481113] orion-ehci d0050000.usb: EHCI Host Controller [ 2.486443] orion-ehci d0050000.usb: new USB bus registered, assigned bus number 1 [ 2.493659] orion-ehci d0050000.usb: irq 25, io mem 0xd0050000 [ 2.525103] orion-ehci d0050000.usb: USB 2.0 started, EHCI 1.00 [ 2.530853] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 [ 2.538553] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.545261] usb usb1: Product: EHCI Host Controller [ 2.549757] usb usb1: Manufacturer: Linux 4.20.6-mvebu-mirabox-tld-12 ehci_hcd [ 2.556481] usb usb1: SerialNumber: d0050000.usb [ 2.561641] hub 1-0:1.0: USB hub found [ 2.565452] hub 1-0:1.0: 1 port detected [ 2.570332] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.575709] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 2.583289] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010 [ 2.592586] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 [ 2.600419] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.607162] usb usb2: Product: xHCI Host Controller [ 2.611659] usb usb2: Manufacturer: Linux 4.20.6-mvebu-mirabox-tld-12 xhci-hcd [ 2.618396] usb usb2: SerialNumber: 0000:02:00.0 [ 2.623563] hub 2-0:1.0: USB hub found [ 2.627390] hub 2-0:1.0: 2 ports detected [ 2.631881] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.637060] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 [ 2.643957] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 2.649898] ata2: SATA link down (SStatus 0 SControl 300) [ 2.655174] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.662833] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20 [ 2.670553] ata3: SATA link down (SStatus 0 SControl F300) [ 2.675777] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.682432] usb usb3: Product: xHCI Host Controller [ 2.687033] usb usb3: Manufacturer: Linux 4.20.6-mvebu-mirabox-tld-12 xhci-hcd [ 2.693689] usb usb3: SerialNumber: 0000:02:00.0 [ 2.698805] hub 3-0:1.0: USB hub found [ 2.702526] hub 3-0:1.0: 2 ports detected [ 2.707841] usbcore: registered new interface driver usblp [ 2.713715] usbcore: registered new interface driver usb-storage [ 2.720072] mousedev: PS/2 mouse device common for all mice [ 2.726998] i2c /dev entries driver [ 2.734227] rtc-ds1307 0-0068: 'wakeup-source' is set, request for an IRQ is disabled! [ 2.746171] rtc-ds1307 0-0068: registered as rtc0 [ 2.776558] orion_wdt: Initial timeout 229 sec [ 2.835232] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.846027] ata1.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133 [ 2.851733] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32) [ 2.860596] ata1.00: configured for UDMA/133 [ 2.885647] scsi 0:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5 [ 2.895849] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.913947] sd 0:0:0:0: [sda] Write Protect is off [ 2.918808] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.935218] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 2.941714] sda: sda1 [ 2.952101] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 2.990930] marvell-cesa d0090000.crypto: CESA device successfully registered [ 2.998317] hidraw: raw HID events driver (C) Jiri Kosina [ 3.004418] usbcore: registered new interface driver usbhid [ 3.010069] usbhid: USB HID core driver [ 3.014083] drop_monitor: Initializing network drop monitor service [ 3.020743] NET: Registered protocol family 10 [ 3.036220] Segment Routing with IPv6 [ 3.039677] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.047372] NET: Registered protocol family 17 [ 3.062478] 8021q: 802.1Q VLAN Support v1.8 [ 3.066684] Key type dns_resolver registered [ 3.070878] ThumbEE CPU extension supported. [ 3.074828] Registering SWP/SWPB emulation handler [ 3.081722] registered taskstats version 1 [ 3.086453] Loading compiled-in X.509 certificates [ 3.091027] zswap: loaded using pool lzo/zbud [ 3.169555] usb 1-1: New USB device found, idVendor=196d, idProduct=0201, bcdDevice=11.20 [ 3.185357] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.191949] usb 1-1: Product: USB Drive 3SE [ 3.204434] usb 1-1: Manufacturer: Innodisk [ 3.215250] usb 1-1: SerialNumber: 20190831AA101F845011 [ 3.225849] usb-storage 1-1:1.0: USB Mass Storage device detected [ 3.239305] Key type big_key registered [ 3.255431] scsi host3: usb-storage 1-1:1.0 [ 3.303032] Key type encrypted registered [ 3.311624] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.321014] rtc-ds1307 0-0068: setting system clock to 2020-08-28 05:37:15 UTC (1598593035) [ 3.331975] Freeing unused kernel memory: 1024K [ 3.346918] Checked W+X mappings: passed, no W+X pages found [ 3.352153] Run /init as init process Loading, please wait... Starting version 241 [ 4.453436] scsi 3:0:0:0: Direct-Access Innodisk USB Drive 3SE 1120 PQ: 0 ANSI: 6 [ 4.500374] sd 3:0:0:0: [sdb] 7905280 512-byte logical blocks: (4.05 GB/3.77 GiB) [ 4.514227] sd 3:0:0:0: [sdb] Write Protect is off [ 4.527634] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.560951] sdb: sdb1 [ 4.578971] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 4.838409] random: fast init done Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.33.1 [/sbin/fsck.ext3 (1) -- /dev/sdb1] fsck.ext3 -a -C0 /dev/sdb1 rootfs: Superblock last mount time is in the future. (by less than a day, probably due to the hardware clock being incorrectly set) rootfs: Superblock last write time is in the future. (by less than a day, probably due to the hardware clock being incorrectly set) rootfs: clean, 24109/247008 files, 217229/987904 blocks done. [ 18.664877] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 18.696183] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.93 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting hotplug events dispatcher: systemd-udevd. ok [....] Synthesizing the initial hotplug events (subsystems)...done. [....] Synthesizing the initial hotplug events (devices)...[ 22.708880] systemd-udevd[1570]: could not open moddep file '/lib/mod ules/4.20.6-mvebu-mirabox-tld-12/modules.dep.bin' [ 22.837659] systemd-udevd[1570]: could not open moddep file '/lib/modules/4.20.6-mvebu-mirabox-tld-12/modules.dep.bin' done. [....] Waiting for /dev to be fully populated...[ 23.458720] systemd-udevd[1578]: Using default interface naming scheme 'v240'. [ 23.529962] systemd-udevd[1579]: could not open moddep file '/lib/modules/4.20.6-mvebu-mirabox-tld-12/modules.dep.bin' [ 23.568273] systemd-udevd[1578]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 23.689400] systemd-udevd[1578]: Could not generate persistent MAC address for eth0: No such file or directory [ 23.946938] systemd-udevd[1568]: could not open moddep file '/lib/modules/4.20.6-mvebu-mirabox-tld-12/modules.dep.bin' [ 24.234608] random: crng init done [ 24.276587] systemd-udevd[1582]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 24.309538] systemd-udevd[1580]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 24.328520] systemd-udevd[1569]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. done. [....] Setting hostname to 'debian'...done. [....] Activating swap:. ok [ 28.436413] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [info] Will now check all file systems. fsck from util-linux 2.33.1 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable.. ok [....] Cleaning up temporary files...[....] Cleaning /tmp...done. /tmp. ok [....] Will now mount local filesystems:. ok [....] Will now activate swapfile swap:done. [....] Checking minimum space in /tmp...done. [....] Cleaning up temporary files.... ok [....] Starting Setting kernel variables: sysctl. ok [....] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 33.109309] mvneta d0074000.ethernet eth0: PHY [d0072004.mdio-mii:00] driver [Marvell 88E1318S] [ 33.117891] mvneta d0074000.ethernet eth0: configuring for phy/rgmii-id link mode [ 33.126313] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/92:bd:58:46:1f:64 Sending on LPF/eth0/92:bd:58:46:1f:64 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 [ 36.266053] mvneta d0074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 36.273470] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPOFFER of 192.168.1.190 from 192.168.1.1 DHCPREQUEST for 192.168.1.190 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.1.190 from 192.168.1.1 bound to 192.168.1.190 -- renewal in 33799 seconds. done. [....] Starting RPC port mapper daemon: rpcbind. ok [....] Starting NFS common utilities: statd idmapd. ok [....] Cleaning up temporary files.... ok INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 2531 (syslogd) . ok [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 2558 (klogd) . ok [....] Not starting NFS kernel daemon: no exports. ... (warning). [....] Starting periodic command scheduler: cron. ok [....] Starting system message bus: dbus. ok [....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. ok [....] Starting NTP server: ntpd. ok [....] Starting OpenBSD Secure Shell server: sshd. ok [....] Running local boot scripts (/etc/rc.local)Cannot read bad block mark: Invalid argument <13>Aug 27 22:38:08 root[2767]: Cannot read u-boot env ethaddr . ok Debian GNU/Linux 10 debian ttyS0 debian login:
debian login: root Password: Last login: Thu Sep 5 01:58:44 PDT 2019 from 192.168.0.100 on pts/0 Linux debian 4.20.6-mvebu-mirabox-tld-12 #6 SMP PREEMPT Wed Mar 13 14:43:16 PDT 2019 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. debian 192.168.1.190 NETGEAR ReadyNAS 102 Linux version 4.20.6-mvebu-mirabox-tld-12 (root@tldDebianVM) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-27ubuntu1~18.04)) #6 SMP PREEM PT Wed Mar 13 14:43:16 PDT 2019 Debian 10.0 Thu Aug 27 22:38:19 PDT 2020 up 0 minutes root@debian:~# /root/set_persistent_mac_address Cannot read bad block mark: Invalid argument <13>Aug 27 22:50:20 root[2812]: Cannot read u-boot env ethaddr root@debian:~# fw_printenv Cannot read bad block mark: Invalid argument root@debian:~# cat /proc/mtd dev: size erasesize name mtd0: 00180000 00020000 "u-boot" mtd1: 00020000 00020000 "u-boot-env" mtd2: 00600000 00020000 "uImage" mtd3: 00400000 00020000 "minirootfs" mtd4: 07400000 00020000 "ubifs" root@debian:~# ifconfig eth0 eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.190 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::90bd:58ff:fe46:1f64 prefixlen 64 scopeid 0x20<link> ether 92:bd:58:46:1f:64 txqueuelen 1024 (Ethernet) RX packets 119 bytes 11783 (11.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 155 bytes 13919 (13.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 26 root@debian:~#There seems to be an issue with accessing the mtd block containing the u-boot environment variables? (The mac address is a random one.)
if [ -d /sys/class/leds/rn102:blue:pwr ]; then # Switch the Power LED on, but off again if the Activity LED is on (one power indicator is enough) echo default-on > /sys/class/leds/rn102:blue:pwr/trigger if grep scsi1 /proc/scsi/scsi > /dev/null; then echo none > /sys/class/leds/rn102:blue:pwr/trigger fi if grep scsi2 /proc/scsi/scsi > /dev/null; then echo none > /sys/class/leds/rn102:blue:pwr/trigger fi fi
Re: Debian on Netgear RN102 August 28, 2020 05:37PM |
Admin Registered: 14 years ago Posts: 19,288 |
Quote
There seems to be an issue with accessing the mtd block containing the u-boot environment variables? (The mac address is a random one.)
Quote
root@debian:~# /root/set_persistent_mac_address
Cannot read bad block mark: Invalid argument
<13>Aug 27 22:50:20 root[2812]: Cannot read u-boot env ethaddr
root@debian:~# fw_printenv
Cannot read bad block mark: Invalid argument
root@debian:~# cat /proc/mtd
cat /etc/fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 0x00000 0x20000 0x20000
Quote
The device tree patch is clearly an enhancement. The Backup LED configuration was left untouched by the patch, but I assume you just overlooked modifying it consistently with the Power LED?
Quote
Did you consider initializing the Power LED with 'hearbeat', i.e. load dependent double blinking? Then the Power LED may have one signature during u-boot, another during Linux boot, and become steady on when the boot is finished (through an echo statement in /etc/rc.local.)
Quote
As mentioned, if there is no way to invert the behavior of the Activity LED driven by the sata controller, I prefer to turn the Power LED off in /etc/rc.local when the Activity led is on since one power indicator is enough:
Quote
One more little detail: You may want to exclude the lost+found directory in your next tarball.
Re: Debian on Netgear RN102 August 29, 2020 04:18AM |
Registered: 7 years ago Posts: 192 |
Quote
bodhi
Looks like you have missed the /etc/fw_env.config new definition.
cat /etc/fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 0x0000 0x80000 0x20000 4 cp -a /etc/fw_env.config /etc/fw_env.config.orig /bin/sh cat <<EOF > /etc/fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 0x00000 0x20000 0x20000 EOF exit fw_printenv ethaddr ethaddr=00:50:43:00:02:02 fw_printenv eth1addr eth1addr=12:34:56:78:90:AB /root/set_persistent_mac_address [50839.659892] Setting Persistent MAC address to 00:50:43:00:02:02 <13>Aug 29 07:27:23 root[3211]: Setting Persistent MAC address to 00:50:43:00:02:02 Killed old client process Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/32:19:5b:9d:b8:9e Sending on LPF/eth0/32:19:5b:9d:b8:9e Sending on Socket/fallback DHCPRELEASE of 192.168.1.190 on eth0 to 192.168.1.1 port 67 [50841.006030] mvneta d0074000.ethernet eth0: Link is Down Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [50841.321248] mvneta d0074000.ethernet eth0: PHY [d0072004.mdio-mii:00] driver [Marvell 88E1318S] [50841.329783] mvneta d0074000.ethernet eth0: configuring for phy/rgmii-id link mode [50841.338300] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/00:50:43:00:02:02 Sending on LPF/eth0/00:50:43:00:02:02 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 [50844.464952] mvneta d0074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [50844.472373] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPOFFER of 192.168.1.190 from 192.168.1.1 DHCPREQUEST for 192.168.1.190 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.1.190 from 192.168.1.1 bound to 192.168.1.190 -- renewal in 39511 seconds. ifconfig eth0 eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.190 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::250:43ff:fe00:202 prefixlen 64 scopeid 0x20<link> ether 00:50:43:00:02:02 txqueuelen 1024 (Ethernet) RX packets 3655 bytes 321602 (314.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3415 bytes 240752 (235.1 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 26 fw_printenv Manufacturer Manufacturer=NETGEAR fw_printenv Product Product=ReadyNAS 102The mac address 32:19:5b:9d:b8:9e is a random one while 00:50:43:00:02:02 was invented. The correct one is 12:34:56:78:90:AB stored in 'eth1addr' (and manipulated for this post). To keep the same mac address when upgrading from stock firmware to Debian, 'set_persistent_mac_address' should first poll 'eth1addr' for the mac address, and only if that fails poll 'ethaddr'. This behaviour may be made depending on 'Manufacturer' or 'Product' or both. (Btw, 'Number of sectors' is missing in the new 'fw_env.config', but maybe this is OK?).
Quote
bodhi
To make the SATA LEDs stay ON and then flash during activity, I will need to patch the driver code. Device tree does not have a way to handle this correctly.
Error: unrecognized/unsupported processor variant (0x561f5811).I had already been warned:
dpkg -i linux-image-5.8.5-kirkwood-tld-1_5.8.5-kirkwood-tld-1-1_armel.deb dpkg: error processing archive linux-image-5.8.5-kirkwood-tld-1_5.8.5-kirkwood-tld-1-1_armel.deb (--install): package architecture (armel) does not match system (armhf)which I overruled with the option '--force-architecture '. The commands I used when building the kernel were:
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j $(nproc) bindeb-pkg make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- zImage
Re: Debian on Netgear RN102 August 29, 2020 04:54PM |
Admin Registered: 14 years ago Posts: 19,288 |
Quote
The mac address 32:19:5b:9d:b8:9e is a random one while 00:50:43:00:02:02 was invented. The correct one is 12:34:56:78:90:AB stored in 'eth1addr' (and manipulated for this post). To keep the same mac address when upgrading from stock firmware to Debian, 'set_persistent_mac_address' should first poll 'eth1addr' for the mac address, and only if that fails poll 'ethaddr'. This behaviour may be made depending on 'Manufacturer' or 'Product' or both.
auto lo eth0 iface lo inet loopback iface eth0 inet dhcp
Quote
(Btw, 'Number of sectors' is missing in the new 'fw_env.config', but maybe this is OK?).
Quote
Error: unrecognized/unsupported processor variant (0x561f5811).
Quote
dpkg -i linux-image-5.8.5-kirkwood-tld-1_5.8.5-kirkwood-tld-1-1_armel.deb
Re: Debian on Netgear RN102 August 29, 2020 06:05PM |
Admin Registered: 14 years ago Posts: 19,288 |
Re: Debian on Netgear RN102 August 30, 2020 11:54AM |
Registered: 7 years ago Posts: 192 |
Quote
Since your box use eth1 (unlike most other boxes), then script set_persistent_mac_address should use ethaddr1 and eth1. And also your /etc/network/interfaces needs updated, too. It is default to eth0 in the rootfs (this was the reason for the dhcp to go back to eth0 in your log above).
eth1addr=AA:AA:AA:AA:AA:AA eth1mtu=1500 ethact=egiga1 ethaddr=BB:BB:BB:BB:BB:BB:BB ethmtu=1500 ethprime=egiga1The RN104 is very similar to the RN102, the main differences being:
Quote
Kirkwood kernel cannot be used on this box.
sudo su - cd /tmp md5sum * 73bc2df36a483d0a80170f2d3764045d armada-370-netgear-rn102.dtb 1ac4b3b52a71ca50c6782cf0fc3f8643 armada-370-netgear-rn102.dts da626ebfe1535f03f96fec005e43beef armada-370-netgear-rn102.dts.orig deb08f1be54abf1d04ab263d41552453 Debian-4.12.4-mvebu-tld-1-rootfs-bodhi.tar.bz2 8cf3d08dee09d000cf8b50b2df2f4047 linux-4.20.6-mvebu-mirabox-tld-12-bodhi.tar.bz2 diff -U 1 armada-370-netgear-rn102.dts.orig armada-370-netgear-rn102.dts --- armada-370-netgear-rn102.dts.orig 2020-08-28 14:43:41.917848030 +0200 +++ armada-370-netgear-rn102.dts 2020-08-30 15:09:12.294897002 +0200 @@ -4,2 +4,5 @@ * + * Copyright (C) 2020 bodhi <mibodhi@gmail.com> + * + * Based on * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> @@ -17,2 +20,7 @@ + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + }; + chosen { @@ -105,3 +113,3 @@ gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - default-state = "keep"; + linux,default-trigger = "default-on"; }; @@ -111,3 +119,3 @@ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - default-state = "on"; + linux,default-trigger = "ide-disk1"; }; @@ -117,3 +125,3 @@ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - default-state = "on"; + linux,default-trigger = "ide-disk2"; }; @@ -123,3 +131,3 @@ gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; - default-state = "on"; + linux,default-trigger = "default-on"; }; @@ -249,3 +257,2 @@ reg = <0x0000000 0x180000>; /* 1.5MB */ - read-only; }; lsblk mount /dev/sdc1 /mnt cd /mnt rm -rf * tar -xjf /tmp/Debian-4.12.4-mvebu-tld-1-rootfs-bodhi.tar.bz2 cd etc cp -a fw_env.config fw_env.config.orig /bin/sh cat <<EOF > fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 0x00000 0x20000 0x20000 EOF exit mkdir usr/src/mirabox && cd ../usr/src/mirabox tar xf /tmp/linux-4.20.6-mvebu-mirabox-tld-12-bodhi.tar.bz2 ls -alF total 34204 drwxr-xr-x 2 root root 4096 aug. 30 15:13 ./ drwxr-xr-x 3 root root 4096 aug. 30 15:13 ../ -rw-r--r-- 1 root root 174254 mars 13 2019 config-4.20.6-mvebu-mirabox-tld-12 -rw-r--r-- 1 root root 67443 feb. 7 2019 linux-4.20.6-mvebu-tld-1.patch -rw-r--r-- 1 root root 921600 mars 13 2019 linux-dtb-4.20.6-mvebu-mirabox-tld-12.tar -rw-r--r-- 1 root root 9431996 mars 13 2019 linux-headers-4.20.6-mvebu-mirabox-tld-12_12.0_armhf.deb -rw-r--r-- 1 root root 20292840 mars 13 2019 linux-image-4.20.6-mvebu-mirabox-tld-12_12.0_armhf.deb -rwxr-xr-x 1 root root 4062176 mars 13 2019 zImage-4.20.6-mvebu-mirabox-tld-12* cp -a zImage-4.20.6-mvebu-mirabox-tld-12 zImage.fdt cat /tmp/armada-370-netgear-rn102.dtb >> zImage.fdt mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.20.6-mvebu-mirabox-tld-12 -d zImage.fdt uImage cd ../../../boot/ cp -a uImage uImage.bak cp -a ../usr/src/mirabox/uImage . cd sync && umount /mnt
cat /etc/rc.local #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. if [ -d /sys/class/leds/nsa326:white:sys ]; then echo default-on > /sys/class/leds/nsa326:white:sys/trigger echo none > /sys/class/leds/nsa326:red:sys/trigger echo ide-disk1 > /sys/class/leds/nsa326:white:sata1/trigger echo ide-disk2 > /sys/class/leds/nsa326:white:sata2/trigger echo usb-host > /sys/class/leds/nsa326:white:usb/trigger fi exit 0 fw_printenv | grep eth bootargs_end=:10.4.50.254:255.255.255.0:KW40:eth0:none eth1addr=12:34:56:78:90:AB eth1mtu=1500 ethact=egiga1 ethaddr=00:50:43:00:02:02 ethmtu=1500 ethprime=egiga1 yuk_ethaddr=00:00:00:EE:51:81 ifconfig | grep eth eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether d2:c0:d8:ec:7d:1f txqueuelen 1024 (Ethernet) reboot
ifconfig | grep eth eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 2a:a7:7c:56:58:c2 txqueuelen 1024 (Ethernet) reboot
ifconfig | grep eth eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 56:ca:86:d1:19:63 txqueuelen 1024 (Ethernet)So the patch seems to have no effect and the mac address is still random.
apt install -y esekeyd keytest keytest (ESE Key Deamon 1.2.7, SVN-r63) (input device name as 1st option override autodetection) Pres ANY (fun)key... or Ctrl-C to exit... KEY_116 KEY_116 KEY_133 KEY_133 KEY_408 KEY_408 ^C Caught signal 2, exiting...So the outstanding task is to write an 'esekeyd' configuration file that executes 'shutdown -h now' when KEY_116 has been received twice, with, say, between 5 and 10 seconds between the two events and else do nothing. The tarball includes 3 simple examples, but none involves timing. Last entry in the change log is dated 2010-07-04. A tiny tutorial here. Maybe I'll be inspired to try implementing it some day.
Re: Debian on Netgear RN102 August 30, 2020 04:10PM |
Registered: 5 years ago Posts: 73 |
if [ -d /sys/class/leds/rn102:blue:pwr ]; then # Switch all the LEDs on to bring driver's shadow variables in sync with the LEDs echo default-on > /sys/class/leds/rn102:blue:pwr/trigger echo default-on > /sys/class/leds/rn102:blue:sata1/trigger echo default-on > /sys/class/leds/rn102:blue:sata2/trigger echo default-on > /sys/class/leds/rn102:blue:backup/trigger # Switch the Power LED off if the Activity LED is on (one power indicator is enough) if grep scsi1 /proc/scsi/scsi > /dev/null; then echo none > /sys/class/leds/rn102:blue:pwr/trigger fi if grep scsi2 /proc/scsi/scsi > /dev/null; then echo none > /sys/class/leds/rn102:blue:pwr/trigger fi # Make Sata1 and Sata2 LEDs indicate disk activity echo ide-disk1 > /sys/class/leds/rn102:blue:sata1/trigger echo ide-disk2 > /sys/class/leds/rn102:blue:sata2/trigger # Switch the Backup LED off echo none > /sys/class/leds/rn102:blue:backup/trigger fi
root@debian:~# ls /sys/bus/i2c/drivers/ . .. at24 dummy pca953x rtc-ds1307 rtc-pcf8563 rtc-s35390a tcpci
Re: Debian on Netgear RN102 August 30, 2020 04:32PM |
Admin Registered: 14 years ago Posts: 19,288 |
Re: Debian on Netgear RN102 August 30, 2020 04:42PM |
Admin Registered: 14 years ago Posts: 19,288 |
Re: Debian on Netgear RN102 August 30, 2020 05:09PM |
Registered: 5 years ago Posts: 73 |
root@debian:~# cat /proc/filesystems nodev sysfs nodev rootfs nodev ramfs nodev bdev nodev proc nodev cpuset nodev cgroup nodev cgroup2 nodev tmpfs nodev devtmpfs nodev debugfs nodev tracefs nodev securityfs nodev sockfs nodev bpf nodev pipefs nodev rpc_pipefs nodev devpts ext3 ext4 nodev nfs nodev nfs4 nodev nfsd nodev autofs nodev mqueue root@debian:~# lsmod | grep btrfs root@debian:~# modprobe btrfs modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.20.6-mvebu-mirabox-tld-12/modules.dep.bin' modprobe: FATAL: Module btrfs not found in directory /lib/modules/4.20.6-mvebu-mirabox-tld-12
Re: Debian on Netgear RN102 September 01, 2020 02:06PM |
Registered: 7 years ago Posts: 192 |
Re: Debian on Netgear RN102 September 01, 2020 02:27PM |
Registered: 7 years ago Posts: 192 |
Re: Debian on Netgear RN102 September 01, 2020 04:00PM |
Admin Registered: 14 years ago Posts: 19,288 |
Re: Debian on Netgear RN102 September 02, 2020 06:46AM |
Registered: 5 years ago Posts: 73 |
cd /boot/ ls wget https://www.dropbox.com/s/81g4f67bf2hurzj/linux-5.8.5-mvebu-370xp-tld-1-bodhi.tar.bz2 tar -xjf linux-5.8.5-mvebu-370xp-tld-1-bodhi.tar.bz2 tar -xf linux-dtb-5.8.5-mvebu-370xp-tld-1.tar dpkg -i linux-image-5.8.5-mvebu-370xp-tld-1_1.0_armhf.deb cp -a zImage-5.8.5-mvebu-370xp-tld-1 zImage.fdt cat dts/armada-370-netgear-rn102.dtb >> zImage.fdt mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.8.5-mvebu-370xp-tld-1 -d zImage.fdt uImage mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-5.8.5-mvebu-370xp-tld-1 -d initrd.img-5.8.5-mvebu-370xp-tld-1 uInitrd sync sync sync shutdown -r now
BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0000 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Successfully BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xf12c) 128 MiB MMC: MRVL_MMC: 0 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] Power On! FDT loaded successfully Hit any key to stop autoboot: 0 (Re)start USB... USB: Active port: 0 Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Loading file "/boot/uImage" from usb device 0:1 () 5418806 bytes read Loading file "/boot/uInitrd" from usb device 0:1 () 7926735 bytes read ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux-5.8.5-mvebu-370xp-tld-1 Created: 2020-09-02 11:26:07 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5418742 Bytes = 5.2 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: initramfs-5.8.5-mvebu-370xp-tld- Created: 2020-09-02 11:27:17 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7926671 Bytes = 7.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.8.5-mvebu-370xp-tld-1 (root@tldDebianVM) (arm-linux-gnueab ihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0, GNU ld (GNU Binutils for Ubuntu) 2.30) #1.0 S MP PREEMPT Mon Aug 31 00:00:32 PDT 2020 [ 0.000000][ T0] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d [ 0.000000][ T0] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: NETGEAR ReadyNAS 102 [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000][ T0] HighMem empty [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000][ T0] CPU: All CPU(s) started in SVC mode. [ 0.000000][ T0] percpu: Embedded 20 pages/cpu s53068 r8192 d20660 u81920 [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 m tdparts=pxa3xx_nand-0:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0 x400000@0x800000(minirootfs),-(ubifs) earlyprintk=serial init=/bin/systemd mtdparts=pxa3xx_nand-0 :0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x400000@0x800000(mini rootfs),-(ubifs) reason=normal bdtype=rn102 [ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 495144K/524288K available (10240K kernel code, 1012K rwdata, 3072K rodata, 1024K init, 342K bss, 29144K reserved, 0K cma-reserved, 0K highmem) [ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x338/0x794 with crng_i nit=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Rude variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] L2C: DT/platform modifies aux control register: 0x12086300 -> 0x1a086302 [ 0.000000][ T0] Aurora cache controller enabled, 4 ways, 256 kB [ 0.000000][ T0] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302 [ 0.000000][ T0] Switching to timer-based delay loop, resolution 53ns [ 0.000006][ T0] sched_clock: 32 bits at 18MHz, resolution 53ns, wraps every 114537122277ns [ 0.007874][ T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xfff fffff, max_idle_ns: 101938038664 ns [ 0.019298][ T0] Console: colour dummy device 80x30 [ 0.024017][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 37.49 BogoMIPS (lpj=187492) [ 0.034147][ T0] pid_max: default: 32768 minimum: 301 [ 0.039212][ T0] LSM: Security Framework initializing [ 0.044161][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051489][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.060290][ T0] CPU: Testing write buffer coherency: ok [ 0.065731][ T1] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.072068][ T1] Setting up static identity map for 0x100000 - 0x100060 [ 0.078760][ T1] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1 [ 0.084193][ T1] mvebu-pmsu: Initializing Power Management Service Unit [ 0.090718][ T1] rcu: Hierarchical SRCU implementation. [ 0.098638][ T1] smp: Bringing up secondary CPUs ... [ 0.103421][ T1] smp: Brought up 1 node, 1 CPU [ 0.107716][ T1] SMP: Total of 1 processors activated (37.49 BogoMIPS). [ 0.114045][ T1] CPU: All CPU(s) started in SVC mode. [ 0.119586][ T1] devtmpfs: initialized [ 0.128196][ T1] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 0.137116][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns : 19112604462750000 ns [ 0.146889][ T1] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.154100][ T1] xor: measuring software checksum speed [ 0.258574][ T1] arm4regs : 1103.200 MB/sec [ 0.358572][ T1] 8regs : 671.200 MB/sec [ 0.458566][ T1] 32regs : 1062.400 MB/sec [ 0.463020][ T1] xor: using function: arm4regs (1103.200 MB/sec) [ 0.468785][ T1] prandom: seed boundary self test passed [ 0.477388][ T1] prandom: 100 self tests passed [ 0.481801][ T1] pinctrl core: initialized pinctrl subsystem [ 0.488932][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.489668][ T1] NET: Registered protocol family 16 [ 0.502552][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.510443][ T1] audit: initializing netlink subsys (disabled) [ 0.516410][ T31] audit: type=2000 audit(0.490:1): state=initialized audit_enabled=0 res=1 [ 0.526705][ T1] cpuidle: using governor ladder [ 0.532718][ T1] cpuidle: using governor menu [ 0.537231][ T1] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.809710][ T1] raid6: int32x8 gen() 214 MB/s [ 0.978965][ T1] raid6: int32x8 xor() 135 MB/s [ 1.148650][ T1] raid6: int32x4 gen() 224 MB/s [ 1.318727][ T1] raid6: int32x4 xor() 151 MB/s [ 1.488583][ T1] raid6: int32x2 gen() 414 MB/s [ 1.658568][ T1] raid6: int32x2 xor() 217 MB/s [ 1.828601][ T1] raid6: int32x1 gen() 430 MB/s [ 1.998590][ T1] raid6: int32x1 xor() 201 MB/s [ 2.003121][ T1] raid6: using algorithm int32x1 gen() 430 MB/s [ 2.008694][ T1] raid6: .... xor() 201 MB/s, rmw enabled [ 2.013779][ T1] raid6: using intx1 recovery algorithm [ 2.020121][ T1] vgaarb: loaded [ 2.025088][ T1] SCSI subsystem initialized [ 2.030350][ T1] usbcore: registered new interface driver usbfs [ 2.036048][ T1] usbcore: registered new interface driver hub [ 2.043236][ T1] usbcore: registered new device driver usb [ 2.049946][ T1] mc: Linux media interface: v0.10 [ 2.055379][ T1] videodev: Linux video capture interface: v2.00 [ 2.061857][ T1] pps_core: LinuxPPS API ver. 1 registered [ 2.067026][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giom etti@linux.it> [ 2.076766][ T1] PTP clock support registered [ 2.084598][ T1] clocksource: Switched to clocksource armada_370_xp_clocksource [ 3.073802][ T1] VFS: Disk quotas dquot_6.6.0 [ 3.078185][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.113338][ T1] NET: Registered protocol family 2 [ 3.120897][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, li near) [ 3.129603][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 3.137650][ T1] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.144942][ T1] TCP: Hash tables configured (established 4096 bind 4096) [ 3.151947][ T1] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.158758][ T1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.165989][ T1] NET: Registered protocol family 1 [ 3.171371][ T1] RPC: Registered named UNIX socket transport module. [ 3.177510][ T1] RPC: Registered udp transport module. [ 3.182438][ T1] RPC: Registered tcp transport module. [ 3.187386][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.193904][ T1] PCI: CLS 0 bytes, default 64 [ 3.198514][ T1] Trying to unpack rootfs image as initramfs... [ 3.736184][ T1] Freeing initrd memory: 7744K [ 3.740709][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.747648][ T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters availab le [ 3.758570][ T1] Initialise system trusted keyrings [ 3.763311][ T1] Key type blacklist registered [ 3.769845][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 3.776644][ T1] zbud: loaded [ 3.781248][ T1] NFS: Registering the id_resolver key type [ 3.786957][ T1] Key type id_resolver registered [ 3.791414][ T1] Key type id_legacy registered [ 3.795847][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.802608][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.809484][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 3.817763][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 3.824483][ T1] orangefs_init: module version upstream loaded [ 3.904228][ T1] async_tx: api initialized (async) [ 3.908935][ T1] Key type asymmetric registered [ 3.913310][ T1] Asymmetric key parser 'x509' registered [ 3.918657][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 3.926341][ T1] io scheduler bfq registered [ 3.933365][ T1] armada-370-pinctrl d0018000.pin-ctrl: registered pinctrl driver [ 3.949931][ T1] mvebu-pcie soc:pcie@82000000: PCI host bridge to bus 0000:00 [ 3.957288][ T1] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.962937][ T1] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff] [ 3.970275][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 3.976948][ T1] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400 [ 3.983100][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 3.990536][ T1] pci 0000:00:02.0: [11ab:6710] type 01 class 0x060400 [ 3.996931][ T1] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 4.005391][ T1] PCI: bus0: Fast back to back transfers disabled [ 4.011129][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfigurin g [ 4.019179][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfigurin g [ 4.027564][ T1] pci 0000:01:00.0: [1b4b:9170] type 00 class 0x010601 [ 4.033716][ T1] pci 0000:01:00.0: reg 0x10: [io 0xfffffff8-0xffffffff] [ 4.040283][ T1] pci 0000:01:00.0: reg 0x14: [io 0xfffffffc-0xffffffff] [ 4.046748][ T1] pci 0000:01:00.0: reg 0x18: [io 0xfffffff8-0xffffffff] [ 4.053113][ T1] pci 0000:01:00.0: reg 0x1c: [io 0xfffffffc-0xffffffff] [ 4.059561][ T1] pci 0000:01:00.0: reg 0x20: [io 0xfffffff0-0xffffffff] [ 4.065981][ T1] pci 0000:01:00.0: reg 0x24: [mem 0x40000000-0x400001ff] [ 4.072346][ T1] pci 0000:01:00.0: reg 0x30: [mem 0xd0000000-0xd000ffff pref] [ 4.079180][ T1] pci 0000:01:00.0: Enabling fixed DMA alias to 00.1 [ 4.085250][ T1] pci 0000:01:00.0: PME# supported from D3hot [ 4.091108][ T1] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent , reconfiguring [ 4.125689][ T1] PCI: bus1: Fast back to back transfers disabled [ 4.131428][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 4.138520][ T1] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330 [ 4.144853][ T1] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x4200ffff 64bit] [ 4.151698][ T1] pci 0000:02:00.0: reg 0x18: [mem 0x42010000-0x42010fff 64bit] [ 4.158644][ T1] pci 0000:02:00.0: reg 0x20: [mem 0x42011000-0x42011fff 64bit] [ 4.165649][ T1] pci 0000:02:00.0: supports D1 [ 4.169948][ T1] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold [ 4.176900][ T1] pci 0000:00:02.0: ASPM: current common clock configuration is inconsistent , reconfiguring [ 4.215680][ T1] PCI: bus2: Fast back to back transfers disabled [ 4.221419][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 4.228243][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xf8000000-0xf80fffff] [ 4.235218][ T1] pci 0000:00:02.0: BAR 14: assigned [mem 0xf8100000-0xf81fffff] [ 4.242131][ T1] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff] [ 4.248617][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xf8200000-0xf82007ff pref] [ 4.255870][ T1] pci 0000:00:02.0: BAR 6: assigned [mem 0xf8300000-0xf83007ff pref] [ 4.263107][ T1] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8000000-0xf800ffff pref] [ 4.270355][ T1] pci 0000:01:00.0: BAR 5: assigned [mem 0xf8010000-0xf80101ff] [ 4.277210][ T1] pci 0000:01:00.0: BAR 4: assigned [io 0x10000-0x1000f] [ 4.283569][ T1] pci 0000:01:00.0: BAR 0: assigned [io 0x10010-0x10017] [ 4.289947][ T1] pci 0000:01:00.0: BAR 2: assigned [io 0x10018-0x1001f] [ 4.296324][ T1] pci 0000:01:00.0: BAR 1: assigned [io 0x10020-0x10023] [ 4.302683][ T1] pci 0000:01:00.0: BAR 3: assigned [io 0x10024-0x10027] [ 4.309060][ T1] pci 0000:00:01.0: PCI bridge to [bus 01] [ 4.314229][ T1] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff] [ 4.320605][ T1] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff] [ 4.327465][ T1] pci 0000:02:00.0: BAR 0: assigned [mem 0xf8100000-0xf810ffff 64bit] [ 4.334800][ T1] pci 0000:02:00.0: BAR 2: assigned [mem 0xf8110000-0xf8110fff 64bit] [ 4.342116][ T1] pci 0000:02:00.0: BAR 4: assigned [mem 0xf8111000-0xf8111fff 64bit] [ 4.349448][ T1] pci 0000:00:02.0: PCI bridge to [bus 02] [ 4.354636][ T1] pci 0000:00:02.0: bridge window [mem 0xf8100000-0xf81fffff] [ 4.361592][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 4.367941][ T1] pcieport 0000:00:02.0: enabling device (0140 -> 0142) [ 4.375438][ T1] mv_xor d0060800.xor: Marvell shared XOR driver [ 4.445980][ T1] mv_xor d0060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.456985][ T1] mv_xor d0060900.xor: Marvell shared XOR driver [ 4.526001][ T1] mv_xor d0060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.723049][ T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.735187][ T1] printk: console [ttyS0] disabled [ 4.760925][ T1] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 19, base_baud = 12500000) is a 16550A [ 4.770169][ T1] printk: console [ttyS0] enabled [ 4.770169][ T1] printk: console [ttyS0] enabled [ 4.779378][ T1] printk: bootconsole [earlycon0] disabled [ 4.779378][ T1] printk: bootconsole [earlycon0] disabled [ 4.792086][ T1] ahci 0000:01:00.0: enabling device (0146 -> 0147) [ 4.799181][ T1] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mo de [ 4.807423][ T1] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sx s [ 4.818859][ T1] scsi host0: ahci [ 4.823382][ T1] scsi host1: ahci [ 4.827555][ T1] ata1: SATA max UDMA/133 abar m512@0xf8010000 port 0xf8010100 irq 42 [ 4.835374][ T1] ata2: SATA max UDMA/133 abar m512@0xf8010000 port 0xf8010180 irq 42 [ 4.843794][ T1] sata_mv d00a0000.sata: slots 32 ports 1 [ 4.852102][ T1] scsi host2: sata_mv [ 4.856416][ T1] ata3: SATA max UDMA/133 irq 27 [ 4.862468][ T1] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1 [ 4.870056][ T1] nand: Micron MT29F1G08ABADAWP [ 4.874400][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 4.882884][ T1] Bad block table found at page 65472, version 0x01 [ 4.889501][ T1] Bad block table found at page 65408, version 0x01 [ 4.895855][ T1] 5 cmdlinepart partitions found on MTD device pxa3xx_nand-0 [ 4.902511][ T1] Creating 5 MTD partitions on "pxa3xx_nand-0": [ 4.908195][ T1] 0x000000000000-0x000000180000 : "u-boot" [ 4.915774][ T1] 0x000000180000-0x0000001a0000 : "u-boot-env" [ 4.923986][ T1] 0x000000200000-0x000000800000 : "uImage" [ 4.931989][ T1] 0x000000800000-0x000000c00000 : "minirootfs" [ 4.940389][ T1] 0x000000c00000-0x000008000000 : "ubifs" [ 4.950078][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 4.959153][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. A ll Rights Reserved. [ 4.972426][ T1] libphy: Fixed MDIO Bus: probed [ 4.981895][ T1] libphy: orion_mdio_bus: probed [ 4.998688][ T1] mvneta d0074000.ethernet eth0: Using random mac address ae:1d:e3:ed:d7:7d [ 5.009628][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.016810][ T1] ehci-pci: EHCI PCI platform driver [ 5.021774][ T1] ehci-orion: EHCI orion driver [ 5.026992][ T1] orion-ehci d0050000.usb: EHCI Host Controller [ 5.032639][ T1] orion-ehci d0050000.usb: new USB bus registered, assigned bus number 1 [ 5.040785][ T1] orion-ehci d0050000.usb: irq 25, io mem 0xd0050000 [ 5.074644][ T1] orion-ehci d0050000.usb: USB 2.0 started, EHCI 1.00 [ 5.081150][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 5.089493][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.096856][ T1] usb usb1: Product: EHCI Host Controller [ 5.102046][ T1] usb usb1: Manufacturer: Linux 5.8.5-mvebu-370xp-tld-1 ehci_hcd [ 5.109086][ T1] usb usb1: SerialNumber: d0050000.usb [ 5.115126][ T1] hub 1-0:1.0: USB hub found [ 5.119594][ T1] hub 1-0:1.0: 1 port detected [ 5.125456][ T1] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 5.131439][ T1] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 5.139859][ T1] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00 00000000080010 [ 5.150110][ T1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 5.158509][ T1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.165901][ T1] usb usb2: Product: xHCI Host Controller [ 5.171093][ T1] usb usb2: Manufacturer: Linux 5.8.5-mvebu-370xp-tld-1 xhci-hcd [ 5.178159][ T1197] ata2: SATA link down (SStatus 0 SControl 300) [ 5.183816][ T1] usb usb2: SerialNumber: 0000:02:00.0 [ 5.188892][ T1209] ata3: SATA link down (SStatus 0 SControl F300) [ 5.195594][ T1] hub 2-0:1.0: USB hub found [ 5.200108][ T1] hub 2-0:1.0: 2 ports detected [ 5.205580][ T1] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 5.211413][ T1] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 [ 5.219033][ T1] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 5.225790][ T1] usb usb3: We don't know the algorithms for LPM for this host, disabling LP M. [ 5.234079][ T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 5.242413][ T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.249764][ T1] usb usb3: Product: xHCI Host Controller [ 5.254946][ T1] usb usb3: Manufacturer: Linux 5.8.5-mvebu-370xp-tld-1 xhci-hcd [ 5.261921][ T1] usb usb3: SerialNumber: 0000:02:00.0 [ 5.267761][ T1] hub 3-0:1.0: USB hub found [ 5.272135][ T1] hub 3-0:1.0: 2 ports detected [ 5.278282][ T1] usbcore: registered new interface driver usblp [ 5.284998][ T1] usbcore: registered new interface driver usb-storage [ 5.291982][ T1] mousedev: PS/2 mouse device common for all mice [ 5.299787][ T1] i2c /dev entries driver [ 5.308533][ T1] rtc-ds1307 0-0068: 'wakeup-source' is set, request for an IRQ is disabled! [ 5.321922][ T1] rtc-ds1307 0-0068: registered as rtc0 [ 5.328535][ T1] rtc-ds1307 0-0068: setting system clock to 2020-09-02T11:29:35 UTC (159904 6175) [ 5.365422][ T1193] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.372629][ T1] orion_wdt: Initial timeout 229 sec [ 5.379185][ T1] device-mapper: uevent: version 1.0.3 [ 5.384156][ T1193] ata1.00: ATA-7: ST940210AS, 3.ALC, max UDMA/100 [ 5.391281][ T1] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com [ 5.399829][ T1193] ata1.00: 78140160 sectors, multi 0: LBA48 NCQ (depth 32) [ 5.407189][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 5.413933][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 5.420919][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 5.427761][ T1193] ata1.00: configured for UDMA/100 [ 5.432494][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 5.438852][ T1] device-mapper: raid: Loading target version 1.15.1 [ 5.445441][ T187] scsi 0:0:0:0: Direct-Access ATA ST940210AS C PQ: 0 ANSI: 5 [ 5.460907][ T1213] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.3 GiB) [ 5.470859][ T1213] sd 0:0:0:0: [sda] Write Protect is off [ 5.477082][ T1213] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.486177][ T20] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 5.493669][ T1] marvell-cesa d0090000.crypto: CESA device successfully registered [ 5.501773][ T1] hid: raw HID events driver (C) Jiri Kosina [ 5.510405][ T1] usbcore: registered new interface driver usbhid [ 5.516727][ T1] usbhid: USB HID core driver [ 5.521631][ T1] drop_monitor: Initializing network drop monitor service [ 5.529044][ T1] NET: Registered protocol family 10 [ 5.535381][ T1] Segment Routing with IPv6 [ 5.539406][ T1] RPL Segment Routing with IPv6 [ 5.543814][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.552458][ T1] NET: Registered protocol family 17 [ 5.558215][ T1] 8021q: 802.1Q VLAN Support v1.8 [ 5.562800][ T1] Key type dns_resolver registered [ 5.567795][ T1] ThumbEE CPU extension supported. [ 5.572382][ T1] Registering SWP/SWPB emulation handler [ 5.578150][ T1] registered taskstats version 1 [ 5.582575][ T1] Loading compiled-in X.509 certificates [ 5.588115][ T1] zswap: loaded using pool lzo/zbud [ 5.593232][ T1] Key type ._fscrypt registered [ 5.597713][ T1] Key type .fscrypt registered [ 5.601970][ T1] Key type fscrypt-provisioning registered [ 5.610235][ T1] Key type big_key registered [ 5.624042][ T1] Key type encrypted registered [ 5.633042][ T1] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.675323][ T1213] sda: sda1 [ 5.682095][ T1213] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.690883][ T1] Freeing unused kernel memory: 1024K [ 5.698635][ T20] usb 1-1: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00 [ 5.707171][ T20] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.714462][ T20] usb 1-1: Product: Ultra Fit [ 5.720768][ T1] Checked W+X mappings: passed, no W+X pages found [ 5.726814][ T20] usb 1-1: Manufacturer: SanDisk [ 5.731268][ T20] usb 1-1: SerialNumber: MASKED [ 5.736825][ T1] Run /init as init process [ 5.746821][ T20] usb-storage 1-1:1.0: USB Mass Storage device detected [ 5.765556][ T20] scsi host3: usb-storage 1-1:1.0 Loading, please wait... starting version 232 [ 5.983433][ T1480] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 6.006166][ T1480] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 6.013608][ T1480] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 6.826412][ T1213] scsi 3:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 6.855813][ T1404] sd 3:0:0:0: [sdb] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB) [ 6.878245][ T1404] sd 3:0:0:0: [sdb] Write Protect is off [ 6.885181][ T1404] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 6.949621][ T1404] sdb: sdb1 [ 6.962710][ T1404] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 7.069288][ C0] random: fast init done [ 7.691527][ T1490] usbcore: registered new interface driver uas Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 21.356837][ T1505] process '/bin/fstype' started with executable stack Begin: Will now check root file system ... fsck from util-linux 2.29.2 [/sbin/fsck.ext3 (1) -- /dev/sdb1] fsck.ext3 -a -C0 /dev/sdb1 rootfs: clean, 24787/938400 files, 380772/3752704 blocks done. [ 21.640212][ T1515] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 21.690577][ T1515] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 22.698541][ T1] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSV INIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 22.735695][ T1] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 22.787421][ T1] systemd[1]: Set hostname to <debian>. [ 23.736897][ T1] systemd[1]: rsyslog.service: Cannot add dependency job, ignoring: Unit rsyslog.service is masked. [ 23.755409][ T1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 23.796107][ T1] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 23.837241][ T1] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 23.875586][ T1] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 23.917001][ T1] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ 23.955760][ T1] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on Journal Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Created slice System Slice. Mounting NFSD configuration filesystem... Starting Load Kernel Modules... Mounting POSIX Message Queue File System... [ OK ] Reached target Slices. Mounting Debug File System... [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Encrypted Volumes. Starting Create list of required st…ce nodes for the current kernel... [ OK ] Reached target Paths. [ OK ] Created slice system-getty.slice. Starting Remount Root and Kernel File Systems... [ OK ] Listening on udev Kernel Socket. Starting Journal Service... [ OK ] Reached target Swap. [ 24.624140][ T1549] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro Mounting RPC Pipe File System... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Mounted NFSD configuration filesystem. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted RPC Pipe File System. [ OK ] Started Load Kernel Modules. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Load/Save Random Seed... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... Starting pNFS block layout mapping daemon... [ OK ] Started Load/Save Random Seed. [ OK ] Started Apply Kernel Variables. [ OK ] Started pNFS block layout mapping daemon. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /tmp... [ OK ] Mounted /tmp. [ OK ] Reached target Local File Systems. Starting Raise network interfaces... Starting Preprocess NFS configuration... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ OK ] Started Preprocess NFS configuration. [ 26.429350][ C0] random: crng init done [ 26.433154][ C0] random: 7 urandom warning(s) missed due to ratelimiting Starting NFSv4 ID-name mapping service... [ OK ] Reached target NFS client services. [ OK ] Started NFSv4 ID-name mapping service. [ 26.671355][ T1550] systemd-journald[1550]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Time Synchronized. Starting RPC bind portmap service... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started RPC bind portmap service. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target RPC Port Mapper. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Regular background program processing daemon. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Started D-Bus System Message Bus. [ OK ] Started Avahi mDNS/DNS-SD Stack. Starting Login Service... [ OK ] Found device /dev/ttyS0. [ OK ] Started Login Service. [ 30.331842][ T1601] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 30.368301][ T1601] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ *** ] A start job is running for Raise network interfaces (12s / 5min 12s)[ 37.030901][ T1669] mvneta d0074000.ethe rnet eth0: PHY [d0072004.mdio-mii:00] driver [Marvell 88E1318S] (irq=POLL) [ 37.040932][ T1669] mvneta d0074000.ethernet eth0: configuring for phy/rgmii-id link mode [ **] A start job is running for Raise network interfaces (14s / 5min 12s)[ 39.145686][ T1379] mvneta d0074000.ethe rnet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 39.153914][ T1379] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. Starting OpenBSD Secure Shell server... [ OK ] Reached target Network is Online. Starting NFS Mount Daemon... Starting /etc/rc.local Compatibility... [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started NFS Mount Daemon. Starting NFS server and services... [ OK ] Started OpenBSD Secure Shell server. [ 49.289828][ T1768] NFSD: Using UMH upcall client tracking operations. [ 49.296084][ T1768] NFSD: starting 90-second grace period (net f0000021) [ OK ] Started NFS server and services. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Starting Permit User Sessions... Starting LSB: Start NTP daemon... Starting LSB: Starts syslogd... [ OK ] Started Permit User Sessions. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started LSB: Starts syslogd. Starting LSB: Starts klogd... [ OK ] Started LSB: Starts klogd. [ 54.778738][ T1790] fbcon: Taking over console Debian GNU/Linux 9 debian ttyS0 debian login: root Password: Last login: Wed Sep 2 04:16:44 PDT 2020 from 192.168.2.158 on pts/0 Linux debian 5.8.5-mvebu-370xp-tld-1 #1.0 SMP PREEMPT Mon Aug 31 00:00:32 PDT 2020 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. debian 192.168.2.174 NETGEAR ReadyNAS 102 Linux version 5.8.5-mvebu-370xp-tld-1 (root@tldDebianVM) (arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7 .5.0, GNU ld (GNU Binutils for Ubuntu) 2.30) #1.0 SMP PREEMPT Mon Aug 31 00:00:32 PDT 2020 Debian 9.13 Wed Sep 2 04:31:36 PDT 2020 up 1 minute root@debian:~# uname -a Linux debian 5.8.5-mvebu-370xp-tld-1 #1.0 SMP PREEMPT Mon Aug 31 00:00:32 PDT 2020 armv7l GNU/Linux
Re: Debian on Netgear RN102 September 02, 2020 03:02PM |
Registered: 7 years ago Posts: 192 |
sudo su - cd /tmp md5sum * ffe6bb6a1d591b06be1f3a55273bc236 armada-370-netgear-rn102.dtb ffa864878dd797241c0bea05d563239a Debian-5.2.9-mvebu-tld-1-rootfs-bodhi.tar.bz2 8cf3d08dee09d000cf8b50b2df2f4047 linux-4.20.6-mvebu-mirabox-tld-12-bodhi.tar.bz2 17c3e1784dea18b2a3587a6ebb7aa894 linux-5.8.5-mvebu-370xp-tld-1-bodhi.tar.bz2 systemctl stop udisks2.service lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 1 3,8G 0 disk └─sdb1 8:17 1 3,8G 0 part mount /dev/sdb1 /mnt rm -rf /mnt/* cd /mnt tar -xjf /tmp/Debian-5.2.9-mvebu-tld-1-rootfs-bodhi.tar.bz2 cp -a etc/fw_env.config etc/fw_env.config.orig /bin/sh cat <<EOF > etc/fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 0x00000 0x20000 0x20000 EOF exit cp -a etc/rc.local etc/rc.local.orig nano etc/rc.local diff -U 1 etc/rc.local.orig etc/rc.local --- etc/rc.local.orig 2019-09-05 10:35:02.000000000 +0200 +++ etc/rc.local 2020-09-02 18:43:13.398733026 +0200 @@ -14,3 +14,3 @@ # Work around to set persistent MAC address in Armada boxes -if [ -f /root/set_persistent_mac_address ]; then +if [ -x /root/set_persistent_mac_address ]; then /root/set_persistent_mac_address @@ -36,2 +36,14 @@ fi + +if [ -d /sys/class/leds/rn102:blue:pwr ]; then + + # Switch the Power LED on, but off again if the Activity LED is on (one power indicator is enough) + echo default-on > /sys/class/leds/rn102:blue:pwr/trigger + if grep scsi0 /proc/scsi/scsi > /dev/null; then + echo none > /sys/class/leds/rn102:blue:pwr/trigger + fi + if grep scsi1 /proc/scsi/scsi > /dev/null; then + echo none > /sys/class/leds/rn102:blue:pwr/trigger + fi +fi mkdir -p usr/local/src/rn102 cd usr/local/src/rn102 tar xf /tmp/linux-5.8.5-mvebu-370xp-tld-1-bodhi.tar.bz2 tar xf linux-dtb-5.8.5-mvebu-370xp-tld-1.tar cp -a zImage-5.8.5-mvebu-370xp-tld-1 zImage.fdt cat dts/armada-370-mirabox.dtb >> zImage.fdt mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.8.5-mvebu-370xp-tld-1 -d zImage.fdt uImage cp -a ../../../../boot/uImage ../../../../boot/uImage.bak # failed with no such file cp -a uImage ../../../../boot/ sync cd umount /mnt exit
cd /mnt mkdir -p usr/local/src/mirabox cd usr/local/src/mirabox tar xf /tmp/linux-4.20.6-mvebu-mirabox-tld-12-bodhi.tar.bz2 tar xf linux-dtb-4.20.6-mvebu-mirabox-tld-12.tar cp -a zImage-4.20.6-mvebu-mirabox-tld-12 zImage.fdt cat dts/armada-370-mirabox.dtb >> zImage.fdt mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-2.20.6-mvebu-mirabox-tld-12 -d zImage.fdt uImage cp -a ../../../../boot/uImage ../../../../boot/uImage.bak cp -a uImage ../../../../boot/ sync cd umount /mnt exit
root@debian.local's password: Linux debian 4.20.6-mvebu-mirabox-tld-12 #6 SMP PREEMPT Wed Mar 13 14:43:16 PDT 2019 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Thu Sep 5 01:58:44 2019 from 192.168.0.100 debian 192.168.1.142 NETGEAR ReadyNAS 102 Linux version 4.20.6-mvebu-mirabox-tld-12 (root@tldDebianVM) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-27ubuntu1~18.04)) #6 SMP PREEMPT Wed Mar 13 14:43:16 PDT 2019 Debian 10.0 Wed Sep 2 11:14:28 PDT 2020 up 2 minutes cd /boot tar xjf /tmp/linux-5.8.5-mvebu-370xp-tld-1-bodhi.tar.bz2 tar xf linux-dtb-5.8.5-mvebu-370xp-tld-1.tar dpkg -i linux-image-5.8.5-mvebu-370xp-tld-1_1.0_armhf.deb cp -a zImage-5.8.5-mvebu-370xp-tld-1 zImage.fdt cat dts/armada-370-netgear-rn102.dtb >> zImage.fdt mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.8.5-mvebu-370xp-tld-1 -d zImage.fdt uImage mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-5.8.5-mvebu-370xp-tld-1 -d initrd.img-5.8.5-mvebu-370xp-tld-1 uInitrd sync shutdown -h now
Re: Debian on Netgear RN102 September 02, 2020 04:33PM |
Admin Registered: 14 years ago Posts: 19,288 |
Re: Debian on Netgear RN102 September 02, 2020 04:42PM |
Admin Registered: 14 years ago Posts: 19,288 |
Quote
Waited for the box to shut down, and hit the power button. The Power LED started blinking at 2 Hz and never stopped.
Quote
Sorry, no serial console today. Should have done 'fw_printenv' before shutting down, but didn't. Sorry, but I believe the u-boot output in this post is still valid.
Re: Debian on Netgear RN102 September 02, 2020 04:51PM |
Admin Registered: 14 years ago Posts: 19,288 |
cd /boot tar xjf /tmp/linux-5.8.5-mvebu-370xp-tld-1-bodhi.tar.bz2 tar xf linux-dtb-5.8.5-mvebu-370xp-tld-1.tar dpkg -i linux-image-5.8.5-mvebu-370xp-tld-1_1.0_armhf.deb
cat dts/armada-370-netgear-rn102.dtb >> zImage.fdt mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.8.5-mvebu-370xp-tld-1 -d zImage.fdt uImage mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-5.8.5-mvebu-370xp-tld-1 -d initrd.img-5.8.5-mvebu-370xp-tld-1 uInitrd sync shutdown -h now
Re: Debian on Netgear RN102 September 03, 2020 04:44AM |
Registered: 5 years ago Posts: 73 |
root@debian:~# cat /proc/filesystems
nodev sysfs
nodev tmpfs
nodev bdev
nodev proc
nodev cgroup
nodev cgroup2
nodev cpuset
nodev devtmpfs
nodev debugfs
nodev tracefs
nodev securityfs
nodev sockfs
nodev bpf
nodev pipefs
nodev ramfs
nodev rpc_pipefs
nodev devpts
ext3
ext4
vfat
msdos
exfat
iso9660
nodev nfs
nodev nfs4
nodev nfsd
nodev jffs2
nodev autofs
nodev overlay
nodev pvfs2
udf
f2fs
nodev mqueue
nodev ubifs
btrfs
root@debian:~# lsmod Module Size Used by btrfs 1138688 0 blake2b_generic 36864 0 sg 32768 0 g762 16384 0 uio_pdrv_genirq 16384 0 uio 20480 1 uio_pdrv_genirq ip_tables 20480 0 x_tables 24576 1 ip_tables uas 20480 0
apt install fancontrol pwmconfig systemctl enable fancontrolHere is my fancontrol config in /etc/fancontrol for reference:
root@debian:~# cat /etc/fancontrol # Configuration file generated by pwmconfig, changes will be lost INTERVAL=10 DEVPATH=hwmon0=devices/virtual/thermal/thermal_zone0 hwmon1=devices/platform/soc/soc:internal-regs/d0011000.i2c/i2c-0/0-003e DEVNAME=hwmon0=d0018300.thermal hwmon1=g762 FCTEMPS=hwmon1/pwm1=hwmon0/temp1_input FCFANS= hwmon1/pwm1=hwmon1/fan1_input MINTEMP=hwmon1/pwm1=42 MAXTEMP=hwmon1/pwm1=65 MINSTART=hwmon1/pwm1=100 MINSTOP=hwmon1/pwm1=90 MINPWM=hwmon1/pwm1=90 MAXPWM=hwmon1/pwm1=255
01d70962932cd5c0ebabc233b4d1bb08 mtd0stockuboot df174cee4210a809fb14b88b72e11dc6 mtd1ubootenvsstripped
[ 55.409274][ T1864] mvneta d0074000.ethernet eth0: PHY [d0072004.mdio-mii:00] driver [Marvell 88E1318S] (irq=POLL) [ 55.419314][ T1864] mvneta d0074000.ethernet eth0: configuring for phy/rgmii- id link mode [ 57.545419][ T5] mvneta d0074000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 57.553648][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 63.524689][ T1445] usb 1-1: reset high-speed USB device number 2 using orion -ehci [*** ] A start job is running for Raise network interfaces (37s / 5min 28s) [ 63.727264][ C0] sd 3:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [ 63.736521][ C0] sd 3:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 6c 8d f0 0 0 00 10 00 [ 63.743966][ C0] blk_update_request: I/O error, dev sdc, sector 7114224 op [ *] A start job is running for Raise ne…rk interfaces (1min 8s / 5min 28s) [ 94.114847][ T1445] usb 1-1: reset high-speed USB device number 2 using orion -ehci [ 94.317048][ T7] sd 3:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_TIME_ OUT driverbyte=DRIVER_OK cmd_age=30s [ 94.326669][ T7] sd 3:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 6c ab 20 0 0 00 e0 00 [ 94.334123][ T7] blk_update_request: I/O error, dev sdc, sector 7121696 op [*** ] A start job is running for Raise ne…k interfaces (1min 38s / 5min 28s) [ 124.834835][ T1445] usb 1-1: reset high-speed USB device number 2 using orion [ *** ] A start job is running for Raise ne…rk interfaces (2min 9s / 5min 28s) [ 155.554666][ T1445] usb 1-1: reset high-speed USB device number 2 using orion -ehci [ 155.757235][ T7] sd 3:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_TIME_ OUT driverbyte=DRIVER_OK cmd_age=30s [ 155.766854][ T7] sd 3:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 6c b2 c8 0 0 00 20 00 [ 155.774306][ T7] blk_update_request: I/O error, dev sdc, sector 7123656 op [ ***] A start job is running for Raise ne…k interfaces (2min 40s / 5min 28s) [ 186.274834][ T1445] usb 1-1: reset high-speed USB device number 2 using orion [*** ] A start job is running for Raise ne…k interfaces (3min 39s / 5min 28s) [*[ T1594] mvneta d0074000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [** ] A start job is running for Raise ne…k interfaces (4min 48s / 5min 28s) [ 366.584868][ T398] INFO: task scsi_eh_3:1443 blocked for more than 122 seconds. [ 366.591706][ T398] Not tainted 5.8.5-mvebu-370xp-tld-1 #1.0 [ 366.598796][ T398] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 366.607516][ T398] scsi_eh_3 D 0 1443 2 0x00000000 [ 366.613266][ T398] [<c0ab810c>] (__schedule) from [<c0ab82a0>] (schedule+0xc0/0x120) [ 366.621887][ T398] [<c0ab82a0>] (schedule) from [<c0ab8680>] (schedule_preempt_disabled+0x14/0x20) [ 366.631114][ T398] [<c0ab8680>] (schedule_preempt_disabled) from [<c0ab9700>] (__mutex_lock.constprop.8+0x170/0x2e0) [ 366.641718][ T398] [<c0ab9700>] (__mutex_lock.constprop.8) from [<c07c99e8>] (device_reset+0x1c/0x48) [ 366.651182][ T398] [<c07c99e8>] (device_reset) from [<c06d51a4>] (scsi_try_bus_device_reset+0x24/0x48) [ 366.660680][ T398] [<c06d51a4>] (scsi_try_bus_device_reset) from [<c06d67e8>] (scsi_eh_ready_devs+0x378/0x990) [ 366.670856][ T398] [<c06d67e8>] (scsi_eh_ready_devs) from [<c06d7d24>] (scsi_error_handler+0x298/0x56c) [ 366.680426][ T398] [<c06d7d24>] (scsi_error_handler) from [<c014704c>] (kthread+0x13c/0x148) [ 366.689153][ T398] [<c014704c>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c) [ 366.697298][ T398] Exception stack(0xdda67fb0 to 0xdda67ff8) [ 366.702616][ T398] 7fa0: 00000000 00000000 00000000 00000000 [ 366.712151][ T398] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 366.721135][ T398] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 366.728787][ T398] INFO: task usb-storage:1445 blocked for more than 123 seconds. [ 366.736657][ T398] Not tainted 5.8.5-mvebu-370xp-tld-1 #1.0 [ 366.742370][ T398] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 366.751797][ T398] usb-storage D 0 1445 2 0x00000000 [ 366.758389][ T398] [<c0ab810c>] (__schedule) from [<c0ab82a0>] (schedule+0xc0/0x120) [ 366.766489][ T398] [<c0ab82a0>] (schedule) from [<c0aba530>] (schedule_timeout+0x24/0xe8) [ 366.774136][ T398] [<c0aba530>] (schedule_timeout) from [<c0ab8c34>] (do_wait_for_common+0xac/0x12c) [ 366.784023][ T398] [<c0ab8c34>] (do_wait_for_common) from [<c0ab8d1c>] (wait_for_common+0x30/0x48) [ 366.793194][ T398] [<c0ab8d1c>] (wait_for_common) from [<c079104c>] (usb_sg_wait+0x70/0x170) [ 366.801931][ T398] [<c079104c>] (usb_sg_wait) from [<c07ca3c0>] (usb_stor_bulk_transfer_sglist.part.2+0x80/0xc4) [ 366.812228][ T398] [<c07ca3c0>] (usb_stor_bulk_transfer_sglist.part.2) from [<c07ca664>] (usb_stor_bulk_srb+0x44/0x74) [ 366.823046][ T398] [<c07ca664>] (usb_stor_bulk_srb) from [<c07ca9e4>] (usb_stor_Bulk_transport+0x13c/0x350) [ 366.832943][ T398] [<c07ca9e4>] (usb_stor_Bulk_transport) from [<c07cadb4>] (usb_stor_invoke_transport+0x2c/0x438) [ 366.843457][ T398] [<c07cadb4>] (usb_stor_invoke_transport) from [<c07cbc7c>] (usb_stor_control_thread+0x1d8/0x224) [ 366.854171][ T398] [<c07cbc7c>] (usb_stor_control_thread) from [<c014704c>] (kthread+0x13c/0x148) [ 366.863354][ T398] [<c014704c>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c) [ 366.871443][ T398] Exception stack(0xdd423fb0 to 0xdd423ff8) [ 366.877588][ T398] 3fa0: 00000000 00000000 00000000 00000000 [ 366.886574][ T398] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 366.895593][ T398] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 366.902447][ T398] INFO: task kworker/u2:5:1452 blocked for more than 123 seconds. [ 366.910897][ T398] Not tainted 5.8.5-mvebu-370xp-tld-1 #1.0 [ 366.917466][ T398] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 366.926157][ T398] kworker/u2:5 D 0 1452 2 0x00000000 [ 366.931905][ T398] Workqueue: writeback wb_workfn (flush-8:32) [ 366.938769][ T398] [<c0ab810c>] (__schedule) from [<c0ab82a0>] (schedule+0xc0/0x120) [ 366.946857][ T398] [<c0ab82a0>] (schedule) from [<c0ab8740>] (io_schedule+0x14/0x24) [ 366.954106][ T398] [<c0ab8740>] (io_schedule) from [<c056d270>] (blk_mq_get_tag+0x168/0x270) [ 366.963294][ T398] [<c056d270>] (blk_mq_get_tag) from [<c0569a34>] (__blk_mq_alloc_request+0xec/0x134) [ 366.972834][ T398] [<c0569a34>] (__blk_mq_alloc_request) from [<c056ab44>] (blk_mq_make_request+0xd0/0x4c8) [ 366.982715][ T398] [<c056ab44>] (blk_mq_make_request) from [<c0560790>] (generic_make_request+0xe8/0x1d8) [ 366.992487][ T398] [<c0560790>] (generic_make_request) from [<c05608bc>] (submit_bio+0x3c/0x1a4) [ 367.001484][ T398] [<c05608bc>] (submit_bio) from [<c02cc984>] (submit_bh_wbc.constprop.24+0x188/0x198) [ 367.011157][ T398] [<c02cc984>] (submit_bh_wbc.constprop.24) from [<c02ced10>] (__block_write_full_page+0x288/0x3a4) [ 367.021763][ T398] [<c02ced10>] (__block_write_full_page) from [<c02cef2c>] (block_write_full_page+0x50/0xac) [ 367.031846][ T398] [<c02cef2c>] (block_write_full_page) from [<c02418b8>] (__writepage+0x14/0x58) [ 367.040940][ T398] [<c02418b8>] (__writepage) from [<c0243434>] (write_cache_pages+0x2d4/0x384) [ 367.049927][ T398] [<c0243434>] (write_cache_pages) from [<c0243530>] (generic_writepages+0x4c/0x80) [ 367.059253][ T398] [<c0243530>] (generic_writepages) from [<c0243d34>] (do_writepages+0x34/0x68) [ 367.068375][ T398] [<c0243d34>] (do_writepages) from [<c02c2988>] (__writeback_single_inode+0xe4/0x4c4) [ 367.077948][ T398] [<c02c2988>] (__writeback_single_inode) from [<c02c32e4>] (writeback_sb_inodes+0x258/0x43c) [ 367.088129][ T398] [<c02c32e4>] (writeback_sb_inodes) from [<c02c352c>] (__writeback_inodes_wb+0x64/0xa0) [ 367.097912][ T398] [<c02c352c>] (__writeback_inodes_wb) from [<c02c37c0>] (wb_writeback+0x258/0x394) [ 367.107295][ T398] [<c02c37c0>] (wb_writeback) from [<c02c43d8>] (wb_workfn+0x180/0x3e4) [ 367.115789][ T398] [<c02c43d8>] (wb_workfn) from [<c0141dbc>] (process_one_work+0x210/0x358) [ 367.123674][ T398] [<c0141dbc>] (process_one_work) from [<c01426d4>] (worker_thread+0x228/0x2cc) [ 367.133303][ T398] [<c01426d4>] (worker_thread) from [<c014704c>] (kthread+0x13c/0x148) [ 367.141587][ T398] [<c014704c>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c) [ 367.149728][ T398] Exception stack(0xdd449fb0 to 0xdd449ff8) [ 367.155844][ T398] 9fa0: 00000000 00000000 00000000 00000000 [ 367.164041][ T398] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 367.173631][ T398] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 367.181263][ T398] INFO: task host:1897 blocked for more than 123 seconds. [ 367.188566][ T398] Not tainted 5.8.5-mvebu-370xp-tld-1 #1.0 [ 367.194280][ T398] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 367.203518][ T398] host D 0 1897 1 0x00000001 [ 367.210093][ T398] [<c0ab810c>] (__schedule) from [<c0ab82a0>] (schedule+0xc0/0x120) [ 367.218136][ T398] [<c0ab82a0>] (schedule) from [<c0ab8740>] (io_schedule+0x14/0x24) [ 367.226299][ T398] [<c0ab8740>] (io_schedule) from [<c056d270>] (blk_mq_get_tag+0x168/0x270) [ 367.234185][ T398] [<c056d270>] (blk_mq_get_tag) from [<c0569a34>] (__blk_mq_alloc_request+0xec/0x134) [ 367.244181][ T398] [<c0569a34>] (__blk_mq_alloc_request) from [<c056ab44>] (blk_mq_make_request+0xd0/0x4c8) [ 367.254166][ T398] [<c056ab44>] (blk_mq_make_request) from [<c0560790>] (generic_make_request+0xe8/0x1d8) [ 367.263908][ T398] [<c0560790>] (generic_make_request) from [<c05608bc>] (submit_bio+0x3c/0x1a4) [ 367.272957][ T398] [<c05608bc>] (submit_bio) from [<c035a5a0>] (ext4_mpage_readpages+0xd0/0x738) [ 367.281965][ T398] [<c035a5a0>] (ext4_mpage_readpages) from [<c02445c4>] (read_pages+0x50/0x130) [ 367.291017][ T398] [<c02445c4>] (read_pages) from [<c0244770>] (page_cache_readahead_unbounded+0xcc/0x1c4) [ 367.300825][ T398] [<c0244770>] (page_cache_readahead_unbounded) from [<c023d32c>] (filemap_fault+0x10c/0x414) [ 367.311003][ T398] [<c023d32c>] (filemap_fault) from [<c0345d30>] (ext4_filemap_fault+0x28/0x3c) [ 367.320020][ T398] [<c0345d30>] (ext4_filemap_fault) from [<c0265bdc>] (__do_fault+0x54/0x7c) [ 367.333446][ T398] [<c0265bdc>] (__do_fault) from [<c0269664>] (handle_mm_fault+0x538/0x938) [ 367.342660][ T398] [<c0269664>] (handle_mm_fault) from [<c01199c0>] (do_page_fault+0x18c/0x314) [ 367.351687][ T398] [<c01199c0>] (do_page_fault) from [<c0119ca4>] (do_DataAbort+0x38/0xb8) [ 367.360193][ T398] [<c0119ca4>] (do_DataAbort) from [<c01015dc>] (__dabt_usr+0x3c/0x40) [ 367.368488][ T398] Exception stack(0xdd6f9fb0 to 0xdd6f9ff8) [ 367.373807][ T398] 9fa0: 001f8133 bebd2a6c b617afe0 b617ca28 [ 367.383417][ T398] 9fc0: b6f2a378 b617ca28 b617ca28 fca7219a b617e7e8 b4641e56 b4630260 00000000 [ 367.392424][ T398] 9fe0: 0000010c bebd2a08 b6f140a5 b6f140ec 200d0030 ffffffff [ 367.400006][ T398] INFO: task systemd-udevd:1923 blocked for more than 123 seconds. [ 367.408069][ T398] Not tainted 5.8.5-mvebu-370xp-tld-1 #1.0 [ 367.413783][ T398] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 367.423034][ T398] systemd-udevd D 0 1923 1569 0x00000001 [ 367.429601][ T398] [<c0ab810c>] (__schedule) from [<c0ab82a0>] (schedule+0xc0/0x120) [ 367.437653][ T398] [<c0ab82a0>] (schedule) from [<c0ab8740>] (io_schedule+0x14/0x24) [ 367.445790][ T398] [<c0ab8740>] (io_schedule) from [<c056d270>] (blk_mq_get_tag+0x168/0x270) [ 367.453677][ T398] [<c056d270>] (blk_mq_get_tag) from [<c0569a34>] (__blk_mq_alloc_request+0xec/0x134) [ 367.463643][ T398] [<c0569a34>] (__blk_mq_alloc_request) from [<c0569ad8>] (blk_mq_alloc_request+0x5c/0xac) [ 367.473721][ T398] [<c0569ad8>] (blk_mq_alloc_request) from [<c055e960>] (blk_get_request+0x80/0xb0) [ 367.483242][ T398] [<c055e960>] (blk_get_request) from [<c06d8370>] (__scsi_execute+0x38/0x178) [ 367.492296][ T398] [<c06d8370>] (__scsi_execute) from [<c06d99ec>] (scsi_test_unit_ready+0x64/0xe8) [ 367.501518][ T398] [<c06d99ec>] (scsi_test_unit_ready) from [<c06e4134>] (sd_check_events+0xd0/0x124) [ 367.510952][ T398] [<c06e4134>] (sd_check_events) from [<c05713d0>] (disk_check_events+0x4c/0x14c) [ 367.520099][ T398] [<c05713d0>] (disk_check_events) from [<c0572b04>] (disk_clear_events+0xa4/0x124) [ 367.529519][ T398] [<c0572b04>] (disk_clear_events) from [<c02d100c>] (check_disk_change+0x18/0x48) [ 367.538750][ T398] [<c02d100c>] (check_disk_change) from [<c06e3aa0>] (sd_open+0x84/0x158) [ 367.547308][ T398] [<c06e3aa0>] (sd_open) from [<c02d2a38>] (__blkdev_get+0x3cc/0x448) [ 367.555504][ T398] [<c02d2a38>] (__blkdev_get) from [<c02d2b10>] (blkdev_get+0x5c/0x134) [ 367.563075][ T398] [<c02d2b10>] (blkdev_get) from [<c0295e30>] (do_dentry_open+0x2f0/0x34c) [ 367.572218][ T398] [<c0295e30>] (do_dentry_open) from [<c02a7cf0>] (path_openat+0x65c/0xa78) [ 367.581031][ T398] [<c02a7cf0>] (path_openat) from [<c02a8148>] (do_filp_open+0x3c/0x9c) [ 367.589491][ T398] [<c02a8148>] (do_filp_open) from [<c0296d8c>] (do_sys_openat2+0x6c/0xd4) [ 367.598087][ T398] [<c0296d8c>] (do_sys_openat2) from [<c0296ed4>] (do_sys_open+0x3c/0x5c) [ 367.606709][ T398] [<c0296ed4>] (do_sys_open) from [<c0100060>] (ret_fast_syscall+0x0/0x54) [ 367.614504][ T398] Exception stack(0xde3affa8 to 0xde3afff0) [ 367.621083][ T398] ffa0: b6f2f000 b6f5b968 ffffff9c 0052ac70 000a8800 00000000 [ 367.630099][ T398] ffc0: b6f2f000 b6f5b968 00000000 00000142 0050b918 00505e28 00503b58 00000004 [ 367.639050][ T398] ffe0: 00000142 be9de748 b6ec725d b6e50746 root@debian:~# [ 3475.974770][ T1445] usb 1-1: reset high-speed USB device number 2 using orion-ehci [ 3532.514735][ T1445] usb 1-1: reset high-speed USB device number 2 using orion-ehci
Re: Debian on Netgear RN102 September 03, 2020 04:53AM |
Registered: 7 years ago Posts: 192 |
root@debian.local's password: Linux debian 5.8.5-mvebu-370xp-tld-1 #1.0 SMP PREEMPT Mon Aug 31 00:00:32 PDT 2020 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Sep 2 11:14:27 2020 from 192.168.1.128 debian 192.168.1.142 NETGEAR ReadyNAS 102 Linux version 5.8.5-mvebu-370xp-tld-1 (root@tldDebianVM) (arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0, GNU ld (GNU Binutils for Ubuntu) 2.30) #1.0 SMP PREEMPT Mon Aug 31 00:00:32 PDT 2020 Debian 10.0 Wed Sep 2 22:00:37 PDT 2020 up 1 minute uname -a Linux debian 5.8.5-mvebu-370xp-tld-1 #1.0 SMP PREEMPT Mon Aug 31 00:00:32 PDT 2020 armv7l GNU/Linux cat /proc/version Linux version 5.8.5-mvebu-370xp-tld-1 (root@tldDebianVM) (arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0, GNU ld (GNU Binutils for Ubuntu) 2.30) #1.0 SMP PREEMPT Mon Aug 31 00:00:32 PDT 2020 cat /etc/fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 0x00000 0x20000 0x20000 cat /proc/mtd dev: size erasesize name mtd0: 00180000 00020000 "u-boot" mtd1: 00020000 00020000 "u-boot-env" mtd2: 00600000 00020000 "uImage" mtd3: 00400000 00020000 "minirootfs" mtd4: 07400000 00020000 "ubifs" dmesg > dmesg.lst fw_printenv > fw_printenv.lst fconfig | grep eth eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 00:50:43:00:02:02 txqueuelen 1024 (Ethernet) fw_printenv | grep eth bootargs_end=:10.4.50.254:255.255.255.0:KW40:eth0:none eth1addr=12:34:56:78:90:AB eth1mtu=1500 ethact=egiga1 ethaddr=00:50:43:00:02:02 ethmtu=1500 ethprime=egiga1 yuk_ethaddr=00:00:00:EE:51:81 cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] [faulty] unused devices: <none> ls -lF /sys/bus/i2c/drivers/ | grep g762 drwxr-xr-x 2 root root 0 Sep 2 22:09 g762/ ls -lF /boot total 157052 drwxr-xr-x 3 root root 4096 Sep 2 11:19 ./ drwxrwxrwx 21 root root 4096 Jan 20 2017 ../ -rw------- 1 root root 3266081 Aug 19 2019 System.map-5.2.9-mvebu-tld-1 -rw-r--r-- 1 root root 4232673 Aug 31 00:00 System.map-5.8.5-mvebu-370xp-tld-1 -rw-r--r-- 1 root root 183639 Aug 19 2019 config-5.2.9-mvebu-tld-1 -rw-r--r-- 1 root root 197818 Aug 31 00:00 config-5.8.5-mvebu-370xp-tld-1 drwxr-xr-x 2 root root 4096 Aug 24 01:28 dts/ -rw-r--r-- 1 root root 9488554 Aug 26 2019 initrd.img-5.2.9-mvebu-tld-1 -rw-r--r-- 1 root root 9504707 Sep 2 11:19 initrd.img-5.8.5-mvebu-370xp-tld-1 -rw-r--r-- 1 root root 38423398 Sep 2 11:16 linux-5.8.5-mvebu-370xp-tld-1-bodhi.tar.bz2 -rw-r--r-- 1 root root 75684 Aug 30 16:05 linux-5.8.5-mvebu-370xp-tld-1.patch -rw-r--r-- 1 root root 1003520 Aug 30 15:23 linux-dtb-5.8.5-mvebu-370xp-tld-1.tar -rw-r--r-- 1 root root 9676808 Aug 19 2019 linux-headers-5.2.9-mvebu-tld-1_1.0_armhf.deb -rw-r--r-- 1 root root 7573820 Aug 31 01:09 linux-headers-5.8.5-mvebu-370xp-tld-1_1.0_armhf.deb -rw-r--r-- 1 root root 25132700 Aug 31 01:09 linux-image-5.8.5-mvebu-370xp-tld-1_1.0_armhf.deb -rw-r--r-- 1 root staff 5418806 Sep 2 22:11 uImage -rw-r--r-- 1 root staff 5417257 Sep 2 10:58 uImage.bak -rw-r--r-- 1 root root 9504771 Sep 2 22:11 uInitrd -rw------- 1 root root 5057632 Aug 19 2019 vmlinuz-5.2.9-mvebu-tld-1 -rwxr-xr-x 1 root root 5404000 Aug 31 00:00 vmlinuz-5.8.5-mvebu-370xp-tld-1* -rwxr-xr-x 1 root root 5057632 Aug 19 2019 zImage* -rwxr-xr-x 1 root root 5057632 Aug 19 2019 zImage-5.2.9-mvebu-tld-1* -rwxr-xr-x 1 root root 5404000 Aug 31 01:03 zImage-5.8.5-mvebu-370xp-tld-1* -rwxr-xr-x 1 root root 5418742 Sep 2 22:10 zImage.fdt*A few comments:
[ 27.104494] systemd-udevd[1710]: Could not generate persistent MAC address for eth0: No such file or directoryDo you know which file is not found?
Re: Debian on Netgear RN102 September 03, 2020 05:07AM |
Registered: 5 years ago Posts: 73 |
Debian GNU/Linux 10 debian ttyS0 debian login: root Password: Last login: Wed Sep 2 16:18:37 PDT 2020 from 192.168.2.134 on pts/1 Linux debian 5.8.5-mvebu-370xp-tld-1 #1.0 SMP PREEMPT Mon Aug 31 00:00:32 PDT 2020 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. debian 192.168.2.240 NETGEAR ReadyNAS 102 Linux version 5.8.5-mvebu-370xp-tld-1 (root@tldDebianVM) (arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0, GNU ld (GNU Binutils for Ubuntu) 2.30) #1.0 SMP PREEMPT Mon Aug 31 00:00:32 PDT 2020 Debian 10.5 Thu Sep 3 02:22:16 PDT 2020 up 1 minute root@debian:~# [ 1500.294733][ T1445] usb 1-1: reset high-speed USB device number 2 using orion-ehci sdsd[ 1545.094738][ T1445] usb 1-1: reset high-speed USB device number 2 using orion-ehci [ 1937.414736][ T1445] usb 1-1: reset high-speed USB device number 2 using orion-ehci [ 2087.446449][ T2586] usb 1-1: USB disconnect, device number 2 [ 2087.484781][ T1495] blk_update_request: I/O error, dev sdc, sector 62216 op 0x1:(WRITE) flags 0x800 phys_seg 5 prio class 0 [ 2087.495383][ T1526] Aborting journal on device sdc1-8. [ 2087.500548][ T1495] blk_update_request: I/O error, dev sdc, sector 23078104 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2087.511156][ T1570] blk_update_request: I/O error, dev sdc, sector 7383096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 2087.522006][ T1495] blk_update_request: I/O error, dev sdc, sector 23078104 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2087.532666][ T1495] blk_update_request: I/O error, dev sdc, sector 23078104 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2087.543364][ T1495] blk_update_request: I/O error, dev sdc, sector 23078104 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2087.553967][ T1495] blk_update_request: I/O error, dev sdc, sector 23078104 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2087.564560][ T1495] blk_update_request: I/O error, dev sdc, sector 23078104 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2087.575152][ T1495] blk_update_request: I/O error, dev sdc, sector 23078104 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2087.585747][ T1495] blk_update_request: I/O error, dev sdc, sector 23078104 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 2087.599416][ T2764] EXT4-fs error (device sdc1) in ext4_reserve_inode_write:5651: Journal has aborted [ 2087.614942][ T1526] Buffer I/O error on dev sdc1, logical block 1436, lost sync page write [ 2087.622598][ T1526] JBD2: Error -5 detected when updating journal superblock for sdc1-8. [ 2087.654956][ T2764] Buffer I/O error on dev sdc1, logical block 0, lost sync page write [ 2087.662374][ T2764] EXT4-fs (sdc1): I/O error while writing superblock [ 2087.764767][ T2764] EXT4-fs (sdc1): Remounting filesystem read-only [ 2087.770569][ T2764] EXT4-fs error (device sdc1): ext4_dirty_inode:5853: inode #522255: comm stress: mark_inode_dirty error [ 2087.834855][ T2764] Buffer I/O error on dev sdc1, logical block 0, lost sync page write [ 2087.842273][ T2764] EXT4-fs (sdc1): I/O error while writing superblock [ 2087.944779][ T2764] EXT4-fs error (device sdc1) in ext4_dirty_inode:5855: Journal has aborted [ 2087.952731][ T2764] Buffer I/O error on dev sdc1, logical block 0, lost sync page write [ 2087.994818][ T2764] EXT4-fs (sdc1): I/O error while writing superblock [ 2088.096023][ T2764] EXT4-fs error (device sdc1): ext4_wait_block_bitmap:521: comm stress: Cannot read block bitmap - block_group = 26, block_bitmap = 851968 [ 2088.237059][ T2764] EXT4-fs error (device sdc1): ext4_discard_preallocations:4185: comm stress: Error -5 loading buddy information for 26 [ 2088.414841][ T2764] EXT4-fs error (device sdc1): ext4_wait_block_bitmap:521: comm stress: Cannot read block bitmap - block_group = 26, block_bitmap = 851968 [ 2088.584786][ T2586] usb 1-1: new high-speed USB device number 3 using orion-ehci [ 2088.604930][ T2764] EXT4-fs error (device sdc1): ext4_discard_preallocations:4185: comm stress: Error -5 loading buddy information for 26 [ 2088.806883][ T2586] usb 1-1: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00 [ 2088.844743][ T2586] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2088.851977][ T2586] usb 1-1: Product: Ultra Fit [ 2088.874819][ T2764] EXT4-fs error (device sdc1): ext4_wait_block_bitmap:521: comm stress: Cannot read block bitmap - block_group = 26, block_bitmap = 851968 [ 2088.887835][ T2586] usb 1-1: Manufacturer: SanDisk [ 2088.892261][ T2586] usb 1-1: SerialNumber: 4C530000301215108532 [ 2088.935999][ T2586] usb-storage 1-1:1.0: USB Mass Storage device detected [ 2088.965179][ T2586] scsi host4: usb-storage 1-1:1.0 [ 2089.065019][ T2764] EXT4-fs error (device sdc1): ext4_discard_preallocations:4193: comm stress: Error -5 reading block bitmap for 26 [ 2089.214880][ T2764] EXT4-fs error (device sdc1): ext4_wait_block_bitmap:521: comm stress: Cannot read block bitmap - block_group = 29, block_bitmap = 950272 [ 2089.915955][ T1] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2089.923671][ T1] CPU: 0 PID: 1 Comm: systemd Not tainted 5.8.5-mvebu-370xp-tld-1 #1.0 [ 2089.931125][ T1] Hardware name: Marvell Armada 370/XP (Device Tree) [ 2089.937174][ T1] [<c0115b10>] (unwind_backtrace) from [<c01106d8>] (show_stack+0x10/0x14) [ 2089.944966][ T1] [<c01106d8>] (show_stack) from [<c05f0d84>] (dump_stack+0x80/0x9c) [ 2089.952277][ T1] [<c05f0d84>] (dump_stack) from [<c0129088>] (panic+0xe4/0x2f0) [ 2089.959261][ T1] [<c0129088>] (panic) from [<c012c914>] (do_exit+0x1b4/0xa28) [ 2089.966080][ T1] [<c012c914>] (do_exit) from [<c012dde0>] (do_group_exit+0x58/0xb8) [ 2089.973383][ T1] [<c012dde0>] (do_group_exit) from [<c01391ac>] (get_signal+0x224/0x6d4) [ 2089.981081][ T1] [<c01391ac>] (get_signal) from [<c010fc1c>] (do_work_pending+0xd8/0x438) [ 2089.988858][ T1] [<c010fc1c>] (do_work_pending) from [<c01000cc>] (slow_work_pending+0xc/0x20) [ 2089.997030][ T1] Exception stack(0xdf487fb0 to 0xdf487ff8) [ 2090.002326][ T1] 7fa0: 00000000 be3b519c 592e3300 592e3300 [ 2090.010501][ T1] 7fc0: 00589ebc be3b5390 be3b5394 00000007 bebb4990 00000000 00000000 00000000 [ 2090.018674][ T1] 7fe0: 000000ae be3b52d8 00526e6d 004ab184 60000030 ffffffff [ 2090.025425][ T1] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---Seems kernel panicing because rootfs usb deattached.
root@debian:~# stress -c 1 -i 2 -m 1 -d 1 stress: info: [2760] dispatching hogs: 1 cpu, 2 io, 1 vm, 1 hdd
BootROM 1.08 Booting from NAND flash General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0000 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Successfully BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xf12c) 128 MiB MMC: MRVL_MMC: 0 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] Power On! FDT loaded successfully Hit any key to stop autoboot: 0 (Re)start USB... USB: Active port: 0 Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Loading file "/boot/uImage" from usb device 0:1 () 5418806 bytes read Loading file "/boot/uInitrd" from usb device 0:1 () 7926735 bytes read ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux-5.8.5-mvebu-370xp-tld-1 Created: 2020-09-02 11:26:07 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5418742 Bytes = 5.2 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: initramfs-5.8.5-mvebu-370xp-tld- Created: 2020-09-02 11:27:17 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7926671 Bytes = 7.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.8.5-mvebu-370xp-tld-1 (root@tldDebianVM) (arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0, GNU ld (GNU Binutils for Ubuntu) 2.30) #1.0 SMP PREEMPT Mon Aug 31 00:00:32 PDT 2020 [ 0.000000][ T0] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10 c5387d [ 0.000000][ T0] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: NETGEAR ReadyNAS 102 [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000][ T0] HighMem empty [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000001f ffffff] [ 0.000000][ T0] CPU: All CPU(s) started in SVC mode. [ 0.000000][ T0] percpu: Embedded 20 pages/cpu s53068 r8192 d20660 u81920 [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 13 0048 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=root fs rootdelay=10 mtdparts=pxa3xx_nand-0:0x180000@0(u-boot),0x20000@0x180000(u-boo t-env),0x600000@0x200000(uImage),0x400000@0x800000(minirootfs),-(ubifs) earlypri ntk=serial init=/bin/systemd mtdparts=pxa3xx_nand-0:0x180000@0(u-boot),0x20000@0 x180000(u-boot-env),0x600000@0x200000(uImage),0x400000@0x800000(minirootfs),-(ub ifs) reason=normal bdtype=rn102 [ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 b ytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 495144K/524288K available (10240K kernel code, 10 12K rwdata, 3072K rodata, 1024K init, 342K bss, 29144K reserved, 0K cma-reserved , 0K highmem) [ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x338/ 0x794 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_id s=1. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Rude variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay i s 10 jiffies. [ 0.000000][ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_id s=1 [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] L2C: DT/platform modifies aux control register: 0x1208630 0 -> 0x1a086302 [ 0.000000][ T0] Aurora cache controller enabled, 4 ways, 256 kB [ 0.000000][ T0] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302 [ 0.000000][ T0] Switching to timer-based delay loop, resolution 53ns [ 0.000007][ T0] sched_clock: 32 bits at 18MHz, resolution 53ns, wraps eve ry 114537122277ns [ 0.007874][ T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 101938038664 ns [ 0.019299][ T0] Console: colour dummy device 80x30 [ 0.024018][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 37.49 BogoMIPS (lpj=187492) [ 0.034148][ T0] pid_max: default: 32768 minimum: 301 [ 0.039213][ T0] LSM: Security Framework initializing [ 0.044160][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 byte s, linear) [ 0.051489][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.060291][ T0] CPU: Testing write buffer coherency: ok [ 0.065736][ T1] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.072072][ T1] Setting up static identity map for 0x100000 - 0x100060 [ 0.078757][ T1] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1 [ 0.084189][ T1] mvebu-pmsu: Initializing Power Management Service Unit [ 0.090712][ T1] rcu: Hierarchical SRCU implementation. [ 0.098536][ T1] smp: Bringing up secondary CPUs ... [ 0.103420][ T1] smp: Brought up 1 node, 1 CPU [ 0.107714][ T1] SMP: Total of 1 processors activated (37.49 BogoMIPS). [ 0.114042][ T1] CPU: All CPU(s) started in SVC mode. [ 0.119585][ T1] devtmpfs: initialized [ 0.128196][ T1] VFP support v0.3: implementor 56 architecture 2 part 20 v ariant 9 rev 6 [ 0.137114][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffff ffff, max_idle_ns: 19112604462750000 ns [ 0.146888][ T1] futex hash table entries: 256 (order: 2, 16384 bytes, lin ear) [ 0.154102][ T1] xor: measuring software checksum speed [ 0.258574][ T1] arm4regs : 1103.200 MB/sec [ 0.358572][ T1] 8regs : 671.200 MB/sec [ 0.458567][ T1] 32regs : 1062.400 MB/sec [ 0.463020][ T1] xor: using function: arm4regs (1103.200 MB/sec) [ 0.468785][ T1] prandom: seed boundary self test passed [ 0.477388][ T1] prandom: 100 self tests passed [ 0.481801][ T1] pinctrl core: initialized pinctrl subsystem [ 0.488931][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.489675][ T1] NET: Registered protocol family 16 [ 0.502536][ T1] DMA: preallocated 256 KiB pool for atomic coherent alloca tions [ 0.510425][ T1] audit: initializing netlink subsys (disabled) [ 0.516393][ T31] audit: type=2000 audit(0.490:1): state=initialized audit_ enabled=0 res=1 [ 0.526678][ T1] cpuidle: using governor ladder [ 0.532693][ T1] cpuidle: using governor menu [ 0.537209][ T1] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.809563][ T1] raid6: int32x8 gen() 214 MB/s [ 0.978963][ T1] raid6: int32x8 xor() 135 MB/s [ 1.148646][ T1] raid6: int32x4 gen() 224 MB/s [ 1.318712][ T1] raid6: int32x4 xor() 151 MB/s [ 1.488585][ T1] raid6: int32x2 gen() 414 MB/s [ 1.658571][ T1] raid6: int32x2 xor() 217 MB/s [ 1.828600][ T1] raid6: int32x1 gen() 430 MB/s [ 1.998590][ T1] raid6: int32x1 xor() 201 MB/s [ 2.003121][ T1] raid6: using algorithm int32x1 gen() 430 MB/s [ 2.008693][ T1] raid6: .... xor() 201 MB/s, rmw enabled [ 2.013778][ T1] raid6: using intx1 recovery algorithm [ 2.020109][ T1] vgaarb: loaded [ 2.025086][ T1] SCSI subsystem initialized [ 2.030350][ T1] usbcore: registered new interface driver usbfs [ 2.036047][ T1] usbcore: registered new interface driver hub [ 2.043237][ T1] usbcore: registered new device driver usb [ 2.049941][ T1] mc: Linux media interface: v0.10 [ 2.055370][ T1] videodev: Linux video capture interface: v2.00 [ 2.061854][ T1] pps_core: LinuxPPS API ver. 1 registered [ 2.067023][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodol fo Giometti <giometti@linux.it> [ 2.076777][ T1] PTP clock support registered [ 2.084608][ T1] clocksource: Switched to clocksource armada_370_xp_clocks ource [ 3.073828][ T1] VFS: Disk quotas dquot_6.6.0 [ 3.078210][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.112855][ T1] NET: Registered protocol family 2 [ 3.120432][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 3.129122][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 3.137162][ T1] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.144352][ T1] TCP: Hash tables configured (established 4096 bind 4096) [ 3.151449][ T1] UDP hash table entries: 256 (order: 1, 8192 bytes, linear ) [ 3.158256][ T1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, l inear) [ 3.165492][ T1] NET: Registered protocol family 1 [ 3.170867][ T1] RPC: Registered named UNIX socket transport module. [ 3.177010][ T1] RPC: Registered udp transport module. [ 3.181937][ T1] RPC: Registered tcp transport module. [ 3.186885][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.193404][ T1] PCI: CLS 0 bytes, default 64 [ 3.198019][ T1] Trying to unpack rootfs image as initramfs... [ 3.738213][ T1] Freeing initrd memory: 7744K [ 3.742739][ T1] NetWinder Floating Point Emulator V0.97 (double precision ) [ 3.749684][ T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 3.760615][ T1] Initialise system trusted keyrings [ 3.767313][ T1] Key type blacklist registered [ 3.771916][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 3.778689][ T1] zbud: loaded [ 3.783288][ T1] NFS: Registering the id_resolver key type [ 3.788989][ T1] Key type id_resolver registered [ 3.793445][ T1] Key type id_legacy registered [ 3.797875][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering ... [ 3.804762][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.811506][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat , Inc. [ 3.819771][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 3.826687][ T1] orangefs_init: module version upstream loaded [ 3.906092][ T1] async_tx: api initialized (async) [ 3.910723][ T1] Key type asymmetric registered [ 3.915172][ T1] Asymmetric key parser 'x509' registered [ 3.920590][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 3.928207][ T1] io scheduler bfq registered [ 3.935296][ T1] armada-370-pinctrl d0018000.pin-ctrl: registered pinctrl driver [ 3.951957][ T1] mvebu-pcie soc:pcie@82000000: PCI host bridge to bus 0000 :00 [ 3.959197][ T1] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.965247][ T1] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdf ffff] [ 3.972160][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 3.978831][ T1] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400 [ 3.985066][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pr ef] [ 3.992402][ T1] pci 0000:00:02.0: [11ab:6710] type 01 class 0x060400 [ 3.998751][ T1] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pr ef] [ 4.007069][ T1] PCI: bus0: Fast back to back transfers disabled [ 4.012806][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-0 0]), reconfiguring [ 4.020981][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-0 0]), reconfiguring [ 4.029387][ T1] pci 0000:01:00.0: [1b4b:9170] type 00 class 0x010601 [ 4.035756][ T1] pci 0000:01:00.0: reg 0x10: [io 0xfffffff8-0xffffffff] [ 4.042124][ T1] pci 0000:01:00.0: reg 0x14: [io 0xfffffffc-0xffffffff] [ 4.048595][ T1] pci 0000:01:00.0: reg 0x18: [io 0xfffffff8-0xffffffff] [ 4.055050][ T1] pci 0000:01:00.0: reg 0x1c: [io 0xfffffffc-0xffffffff] [ 4.061415][ T1] pci 0000:01:00.0: reg 0x20: [io 0xfffffff0-0xffffffff] [ 4.067834][ T1] pci 0000:01:00.0: reg 0x24: [mem 0x40000000-0x400001ff] [ 4.074198][ T1] pci 0000:01:00.0: reg 0x30: [mem 0xd0000000-0xd000ffff pr ef] [ 4.081032][ T1] pci 0000:01:00.0: Enabling fixed DMA alias to 00.1 [ 4.087100][ T1] pci 0000:01:00.0: PME# supported from D3hot [ 4.092952][ T1] pci 0000:00:01.0: ASPM: current common clock configuratio n is inconsistent, reconfiguring [ 4.125699][ T1] PCI: bus1: Fast back to back transfers disabled [ 4.131438][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 4.138525][ T1] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330 [ 4.144860][ T1] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x4200ffff 64 bit] [ 4.151705][ T1] pci 0000:02:00.0: reg 0x18: [mem 0x42010000-0x42010fff 64 bit] [ 4.158648][ T1] pci 0000:02:00.0: reg 0x20: [mem 0x42011000-0x42011fff 64 bit] [ 4.165653][ T1] pci 0000:02:00.0: supports D1 [ 4.169951][ T1] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold [ 4.176900][ T1] pci 0000:00:02.0: ASPM: current common clock configuratio n is inconsistent, reconfiguring [ 4.215692][ T1] PCI: bus2: Fast back to back transfers disabled [ 4.221429][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 4.228253][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xf8000000-0xf80f ffff] [ 4.235230][ T1] pci 0000:00:02.0: BAR 14: assigned [mem 0xf8100000-0xf81f ffff] [ 4.242143][ T1] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff] [ 4.248629][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xf8200000-0xf8200 7ff pref] [ 4.255883][ T1] pci 0000:00:02.0: BAR 6: assigned [mem 0xf8300000-0xf8300 7ff pref] [ 4.263119][ T1] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8000000-0xf800f fff pref] [ 4.270367][ T1] pci 0000:01:00.0: BAR 5: assigned [mem 0xf8010000-0xf8010 1ff] [ 4.277221][ T1] pci 0000:01:00.0: BAR 4: assigned [io 0x10000-0x1000f] [ 4.283581][ T1] pci 0000:01:00.0: BAR 0: assigned [io 0x10010-0x10017] [ 4.289959][ T1] pci 0000:01:00.0: BAR 2: assigned [io 0x10018-0x1001f] [ 4.296335][ T1] pci 0000:01:00.0: BAR 1: assigned [io 0x10020-0x10023] [ 4.302694][ T1] pci 0000:01:00.0: BAR 3: assigned [io 0x10024-0x10027] [ 4.309071][ T1] pci 0000:00:01.0: PCI bridge to [bus 01] [ 4.314240][ T1] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff] [ 4.320615][ T1] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80ff fff] [ 4.327474][ T1] pci 0000:02:00.0: BAR 0: assigned [mem 0xf8100000-0xf810f fff 64bit] [ 4.334808][ T1] pci 0000:02:00.0: BAR 2: assigned [mem 0xf8110000-0xf8110 fff 64bit] [ 4.342124][ T1] pci 0000:02:00.0: BAR 4: assigned [mem 0xf8111000-0xf8111 fff 64bit] [ 4.349455][ T1] pci 0000:00:02.0: PCI bridge to [bus 02] [ 4.354643][ T1] pci 0000:00:02.0: bridge window [mem 0xf8100000-0xf81ff fff] [ 4.361596][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 4.367947][ T1] pcieport 0000:00:02.0: enabling device (0140 -> 0142) [ 4.375450][ T1] mv_xor d0060800.xor: Marvell shared XOR driver [ 4.445987][ T1] mv_xor d0060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.457005][ T1] mv_xor d0060900.xor: Marvell shared XOR driver [ 4.526007][ T1] mv_xor d0060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.725083][ T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.736391][ T1] printk: console [ttyS0] disabled [ 4.762148][ T1] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 19, base _baud = 12500000) is a 16550A [ 4.771157][ T1] printk: console [ttyS0] enabled [ 4.771157][ T1] printk: console [ttyS0] enabled [ 4.780362][ T1] printk: bootconsole [earlycon0] disabled [ 4.780362][ T1] printk: bootconsole [earlycon0] disabled [ 4.793058][ T1] ahci 0000:01:00.0: enabling device (0146 -> 0147) [ 4.800157][ T1] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 4.808398][ T1] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 4.819798][ T1] scsi host0: ahci [ 4.824329][ T1] scsi host1: ahci [ 4.828491][ T1] ata1: SATA max UDMA/133 abar m512@0xf8010000 port 0xf8010 100 irq 42 [ 4.836312][ T1] ata2: SATA max UDMA/133 abar m512@0xf8010000 port 0xf8010 180 irq 42 [ 4.845204][ T1] sata_mv d00a0000.sata: slots 32 ports 1 [ 4.853102][ T1] scsi host2: sata_mv [ 4.857407][ T1] ata3: SATA max UDMA/133 irq 27 [ 4.863467][ T1] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1 [ 4.871069][ T1] nand: Micron MT29F1G08ABADAWP [ 4.875644][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 4.883888][ T1] Bad block table found at page 65472, version 0x01 [ 4.890505][ T1] Bad block table found at page 65408, version 0x01 [ 4.896860][ T1] 5 cmdlinepart partitions found on MTD device pxa3xx_nand- 0 [ 4.903516][ T1] Creating 5 MTD partitions on "pxa3xx_nand-0": [ 4.909199][ T1] 0x000000000000-0x000000180000 : "u-boot" [ 4.916696][ T1] 0x000000180000-0x0000001a0000 : "u-boot-env" [ 4.925028][ T1] 0x000000200000-0x000000800000 : "uImage" [ 4.932913][ T1] 0x000000800000-0x000000c00000 : "minirootfs" [ 4.941300][ T1] 0x000000c00000-0x000008000000 : "ubifs" [ 4.950981][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 4.960065][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Ja son@zx2c4.com>. All Rights Reserved. [ 4.973346][ T1] libphy: Fixed MDIO Bus: probed [ 4.982792][ T1] libphy: orion_mdio_bus: probed [ 4.997330][ T1] mvneta d0074000.ethernet eth0: Using random mac address f e:89:b1:c9:df:2b [ 5.009724][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Drive r [ 5.017142][ T1] ehci-pci: EHCI PCI platform driver [ 5.022115][ T1] ehci-orion: EHCI orion driver [ 5.027197][ T1] orion-ehci d0050000.usb: EHCI Host Controller [ 5.032845][ T1] orion-ehci d0050000.usb: new USB bus registered, assigned bus number 1 [ 5.040960][ T1] orion-ehci d0050000.usb: irq 25, io mem 0xd0050000 [ 5.074655][ T1] orion-ehci d0050000.usb: USB 2.0 started, EHCI 1.00 [ 5.081154][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct= 0002, bcdDevice= 5.08 [ 5.089499][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, Seria lNumber=1 [ 5.096864][ T1] usb usb1: Product: EHCI Host Controller [ 5.102053][ T1] usb usb1: Manufacturer: Linux 5.8.5-mvebu-370xp-tld-1 ehc i_hcd [ 5.109092][ T1] usb usb1: SerialNumber: d0050000.usb [ 5.115137][ T1] hub 1-0:1.0: USB hub found [ 5.119604][ T1] hub 1-0:1.0: 1 port detected [ 5.125462][ T1] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 5.131448][ T1] xhci_hcd 0000:02:00.0: new USB bus registered, assigned b us number 2 [ 5.139883][ T1] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010 [ 5.150129][ T1] usb usb2: New USB device found, idVendor=1d6b, idProduct= 0002, bcdDevice= 5.08 [ 5.158525][ T1] usb usb2: New USB device strings: Mfr=3, Product=2, Seria lNumber=1 [ 5.165918][ T1] usb usb2: Product: xHCI Host Controller [ 5.171109][ T1] usb usb2: Manufacturer: Linux 5.8.5-mvebu-370xp-tld-1 xhc i-hcd [ 5.178189][ T1] usb usb2: SerialNumber: 0000:02:00.0 [ 5.184132][ T1] hub 2-0:1.0: USB hub found [ 5.188391][ T1209] ata3: SATA link down (SStatus 0 SControl F300) [ 5.194460][ T1] hub 2-0:1.0: 2 ports detected [ 5.199930][ T1] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 5.205854][ T1] xhci_hcd 0000:02:00.0: new USB bus registered, assigned b us number 3 [ 5.213329][ T1] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 5.220020][ T1] usb usb3: We don't know the algorithms for LPM for this h ost, disabling LPM. [ 5.228529][ T1] usb usb3: New USB device found, idVendor=1d6b, idProduct= 0003, bcdDevice= 5.08 [ 5.236864][ T1] usb usb3: New USB device strings: Mfr=3, Product=2, Seria lNumber=1 [ 5.244159][ T1] usb usb3: Product: xHCI Host Controller [ 5.249347][ T1] usb usb3: Manufacturer: Linux 5.8.5-mvebu-370xp-tld-1 xhc i-hcd [ 5.256368][ T1] usb usb3: SerialNumber: 0000:02:00.0 [ 5.262190][ T1] hub 3-0:1.0: USB hub found [ 5.266645][ T1] hub 3-0:1.0: 2 ports detected [ 5.272697][ T1] usbcore: registered new interface driver usblp [ 5.279362][ T1] usbcore: registered new interface driver usb-storage [ 5.286576][ T1] mousedev: PS/2 mouse device common for all mice [ 5.294247][ T1] i2c /dev entries driver [ 5.302799][ T1] rtc-ds1307 0-0068: 'wakeup-source' is set, request for an IRQ is disabled! [ 5.316181][ T1] rtc-ds1307 0-0068: registered as rtc0 [ 5.322213][ T1] rtc-ds1307 0-0068: setting system clock to 2020-09-03T10: 09:03 UTC (1599127743) [ 5.354663][ T1198] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.361067][ T1194] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.369152][ T1] orion_wdt: Initial timeout 229 sec [ 5.375739][ T1198] ata2.00: ATA-7: ST940210AS, 3.ALC, max UDMA/100 [ 5.382020][ T1] device-mapper: uevent: version 1.0.3 [ 5.387379][ T1198] ata2.00: 78140160 sectors, multi 0: LBA48 NCQ (depth 32) [ 5.394463][ T1] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialis ed: dm-devel@redhat.com [ 5.403745][ T1] device-mapper: multipath round-robin: version 1.2.0 loade d [ 5.410655][ T1] device-mapper: multipath queue-length: version 0.2.0 load ed [ 5.417507][ T1198] ata2.00: configured for UDMA/100 [ 5.422272][ T1] device-mapper: multipath service-time: version 0.3.0 load ed [ 5.429159][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 5.435493][ T1] device-mapper: raid: Loading target version 1.15.1 [ 5.448859][ T1] marvell-cesa d0090000.crypto: CESA device successfully re gistered [ 5.456894][ T1] hid: raw HID events driver (C) Jiri Kosina [ 5.463513][ T1] usbcore: registered new interface driver usbhid [ 5.469813][ T1] usbhid: USB HID core driver [ 5.474966][ T1] drop_monitor: Initializing network drop monitor service [ 5.482254][ T1] NET: Registered protocol family 10 [ 5.487151][ T20] usb 1-1: new high-speed USB device number 2 using orion-e hci [ 5.495855][ T1] Segment Routing with IPv6 [ 5.499883][ T1] RPL Segment Routing with IPv6 [ 5.504339][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.512896][ T1] NET: Registered protocol family 17 [ 5.518634][ T1] 8021q: 802.1Q VLAN Support v1.8 [ 5.523226][ T1] Key type dns_resolver registered [ 5.528211][ T1] ThumbEE CPU extension supported. [ 5.532796][ T1] Registering SWP/SWPB emulation handler [ 5.538422][ T1] registered taskstats version 1 [ 5.542846][ T1] Loading compiled-in X.509 certificates [ 5.548425][ T1] zswap: loaded using pool lzo/zbud [ 5.553544][ T1] Key type ._fscrypt registered [ 5.557993][ T1] Key type .fscrypt registered [ 5.562249][ T1] Key type fscrypt-provisioning registered [ 5.570670][ T1] Key type big_key registered [ 5.584297][ T1] Key type encrypted registered [ 5.593335][ T1] input: gpio-keys as /devices/platform/gpio-keys/input/inp ut0 [ 5.687703][ T20] usb 1-1: New USB device found, idVendor=0781, idProduct=5 583, bcdDevice= 1.00 [ 5.695977][ T20] usb 1-1: New USB device strings: Mfr=1, Product=2, Serial Number=3 [ 5.703249][ T20] usb 1-1: Product: Ultra Fit [ 5.707482][ T20] usb 1-1: Manufacturer: SanDisk [ 5.711906][ T20] usb 1-1: SerialNumber: 4C530000301215108532 [ 5.719258][ T20] usb-storage 1-1:1.0: USB Mass Storage device detected [ 5.727068][ T20] scsi host3: usb-storage 1-1:1.0 [ 5.827598][ T1194] ata1.00: HPA detected: current 231496650, native 23444164 8 [ 5.834447][ T1194] ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001D, max UDMA/100 [ 5.840954][ T1194] ata1.00: 231496650 sectors, multi 16: LBA48 NCQ (depth 32 ), AA [ 5.849963][ T1194] ata1.00: configured for UDMA/100 [ 5.865643][ T370] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS 1D PQ: 0 ANSI: 5 [ 5.877239][ T7] sd 0:0:0:0: [sda] 231496650 512-byte logical blocks: (119 GB/110 GiB) [ 5.886402][ T15] scsi 1:0:0:0: Direct-Access ATA ST940210AS C PQ: 0 ANSI: 5 [ 5.896524][ T7] sd 0:0:0:0: [sda] Write Protect is off [ 5.905139][ T1452] sd 1:0:0:0: [sdb] 78140160 512-byte logical blocks: (40.0 GB/37.3 GiB) [ 5.915570][ T7] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabl ed, doesn't support DPO or FUA [ 5.924974][ T1452] sd 1:0:0:0: [sdb] Write Protect is off [ 5.930419][ T1452] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabl ed, doesn't support DPO or FUA [ 5.997927][ T7] sda: sda1 sda2 < sda5 > [ 6.008098][ T7] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 6.104936][ T1452] GPT:Primary header thinks Alt. header is not at the end o f the disk. [ 6.112413][ T1452] GPT:78140158 != 78140159 [ 6.116427][ T1452] GPT:Alternate GPT header not at the end of the disk. [ 6.122611][ T1452] GPT:78140158 != 78140159 [ 6.126592][ T1452] GPT: Use GNU Parted to correct GPT errors. [ 6.132030][ T1452] sdb: sdb1 [ 6.138869][ T1452] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 6.147660][ T1] Freeing unused kernel memory: 1024K [ 6.176904][ T1] Checked W+X mappings: passed, no W+X pages found [ 6.182809][ T1] Run /init as init process Loading, please wait... starting version 232 [ 6.415334][ T1490] random: systemd-udevd: uninitialized urandom read (16 byt es read) [ 6.423867][ T1490] random: systemd-udevd: uninitialized urandom read (16 byt es read) [ 6.442867][ T1491] random: udevadm: uninitialized urandom read (16 bytes rea d) [ 6.747178][ T1452] scsi 3:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 6.775895][ T7] sd 3:0:0:0: [sdc] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB) [ 6.798174][ T7] sd 3:0:0:0: [sdc] Write Protect is off [ 6.809547][ T7] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enab led, doesn't support DPO or FUA [ 6.877609][ T7] sdc: sdc1 [ 6.895430][ T7] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 6.975396][ C0] random: fast init done [ 8.120018][ T1499] usbcore: registered new interface driver uas Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 21.123902][ T1515] process '/bin/fstype' started with executable stack Begin: Will now check root file system ... fsck from util-linux 2.29.2 [/sbin/fsck.ext3 (1) -- /dev/sdc1] fsck.ext3 -a -C0 /dev/sdc1 rootfs: recovering journal [ 23.474855][ T1445] usb 1-1: reset high-speed USB device number 2 using orion -ehci [ 23.677126][ C0] sd 3:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [ 23.686380][ C0] sd 3:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 68 08 00 0 0 00 08 00 [ 23.693824][ C0] blk_update_request: I/O error, dev sdc, sector 6817792 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 54.434854][ T1445] usb 1-1: reset high-speed USB device number 2 using orion-ehci
Re: Debian on Netgear RN102 September 03, 2020 05:56AM |
Registered: 7 years ago Posts: 192 |
Quote
tme
I'm running 'systemd' rather than 'init'.
[ 5.792411] Run /init as init process [ 5.796597] with arguments: [ 5.796604] /init [ 5.796608] with environment: [ 5.796613] HOME=/ [ 5.796616] TERM=linux [ 5.796621] reason=normal [ 5.796624] bdtype=rn102
Quote
whitepawn
Trond, may I ask you to try stress command on your box with front usb attached?
Re: Debian on Netgear RN102 September 03, 2020 02:56PM |
Registered: 7 years ago Posts: 192 |
[ 27.104494] systemd-udevd[1710]: Could not generate persistent MAC address for eth0: No such file or directoryin the 'dmesg' log, since both these commands terminate silently:
find ~/kernel/linux-5.8.5 -type f -exec grep -nHo 'systemd-udevd' {} \; find ~/kernel/linux-5.8.5 -type f -exec grep -nHo 'Could not generate persistent MAC address for' {} \;Where is the ghost hiding?
printenv bootargs_end=:10.4.50.254:255.255.255.0:KW40:eth0:none eth1addr=BA:09:87:65:43:21 eth1mtu=1500 ethact=egiga1 ethaddr=00:50:43:00:02:02 ethmtu=1500 ethprime=egiga1 yuk_ethaddr=00:00:00:EE:51:81Booted stock firmware. Logged in as root:
cat /proc/version Linux version 4.4.190.armada.1 (root@blocks) (gcc version 4.6.4 (Marvell GCC release 20160226-c4af733b 64K MAXPAGESIZE ALIGN) ) #1 SMP Mon Oct 28 02:07:39 UTC 2019 ifconfig | grep eth eth0 Link encap:Ethernet HWaddr BA:09:87:65:43:21 dmesg | grep eth [ 4.019043] mvneta d0074000.ethernet eth0: Using device tree mac address BA:09:87:65:43:21 [ 5.220425] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Quote
tme
.., while stock RN102 probably uses 'eth1' and 'eth1addr' (to be confirmed)
fw_setenv ethaddr $(fw_printenv eth1addr)Tested on my first RN102, worked for me and could be added to the installation procedure. Any better ideas?
Re: Debian on Netgear RN102 September 03, 2020 03:55PM |
Registered: 7 years ago Posts: 192 |
Quote
Trond, may ask you to try stress command on your box with front usb attached?
apt install -y stress stress -cpu 1 -io 2 -vm 1 -hdd 1 --timeout 10sThe USB driver reset and disconnected, but no kernel panic. The 'etx4' file system ended up in a bad state, so this test is destructive and the file system must be rebuild from scratch. Output attached in 'console-with-stress.lst'.
[ 1819.352012][ T2859] EXT4-fs error (device sdb1): __ext4_find_entry:1537: inode #231073: comm ntpd: reading directory lblock 0repeats over and over again with different 'inode #', and still hasn't stopped after an hour.
ls [ 2718.122097][ T3063] EXT4-fs error (device sdb1): __ext4_find_entry:1537: inode #127489: comm bash: reading directory lblock 0 [ 2718.132852][ T3063] EXT4-fs error (device sdb1): __ext4_find_entry:1537: inode #127489: comm bash: reading directory lblock 0 [ 2718.144143][ T3063] EXT4-fs error (device sdb1): __ext4_find_entry:1537: inode #127489: comm bash: reading directory lblock 0 -bash: /bin/ls: Input/output errorYou could repeat the test with 'ext3' on the USB stick, since 'ext4' file systems might be more vulnerable to this kind of tests. My USB stick is industrial grade, designed to withstand repeated power losses at any time. It costs at least an order of magnitude more than a commercial grade one with same capacity (4 GB). This might explain why I got no kernel panic. Btw, there are significant quality differences between commercial grade USB sticks from different vendors, so you should probably buy a new one of a well known brand.
Re: Debian on Netgear RN102 September 03, 2020 04:43PM |
Admin Registered: 14 years ago Posts: 19,288 |
Re: Debian on Netgear RN102 September 03, 2020 05:02PM |
Admin Registered: 14 years ago Posts: 19,288 |
Quote
The fw_env.config is wrong for RT102 (but correct for Mirabox, I assume).
Quote
Orderly shut down through a long push on the power button is missing.
Quote
Automatic restart after a power loss from real time clock alarm is missing.
ls -l /sys/class/rtc/rtc0/device/power/wakeup
Re: Debian on Netgear RN102 September 04, 2020 03:16AM |
Registered: 7 years ago Posts: 192 |
Quote[ 27.104494] systemd-udevd[1710]: Could not generate persistent MAC address for eth0: No such file or directoryudev name has changed to systemd-udev, but there is no systemd involved in running udev under sysvinit.
Quote
you can set the env ethaddr to the same MAC address as eth1addr in u-boot
Quote
Quote
The fw_env.config is wrong for RT102 (but correct for Mirabox, I assume).
No it is not wrong as I can tell from your fw_printenv output. Could you repost what you think is wrong?
tar xf /tmp/Debian-5.2.9-mvebu-tld-1-rootfs-bodhi.tar.bz2 ./etc/fw_env.config cat ./etc/fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 0x0000 0x80000 0x20000 4And this is correct for RT102:
# MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 0x00000 0x20000 0x20000I suggest you include both versions in your next root file system, say, 'fw_env.config-512k' and 'fw_env.config-128k', and let 'rc.local' copy the correct one to 'fw_env.config' depending on some criteria. Of course, the criteria must be based on some information from the kernel and not information from the u-boot environment, since access to that environment depends on 'fw_env.config'.
Quote
As I mentioned, you will need to set it up with esekeyd.
Tail of RT102 serial console: [ 5.582241][ T1] 5 cmdlinepart partitions found on MTD device pxa3xx_nand-0 [ 5.589433][ T1202] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.595794][ T1] Creating 5 MTD partitions on "pxa3xx_nand-0": [ 5.601436][ T1] 0x000000000000-0x000000180000 : "u-boot" [ 5.608934][ T1] 0x000000180000-0x0000001a0000 : "u-boot-env" [ 5.617393][ T1] 0x000000200000-0x000000800000 : "uImage" [ 5.625515][ T1] 0x000000800000-0x000000c00000 : "minirootfs" [ 5.633742][ T1] 0x000000c00000-0x000008000000 : "ubifs" [ 5.643547][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 5.652672][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 5.666189][ T1] libphy: Fixed MDIO Bus: probed [ 5.675790][ T1] libphy: orion_mdio_bus: probed [ 5.695371][ T1] mdio_bus d0072004.mdio-mii: MDIO device at address 1 is missing.As reported here:
Quote
After 54 seconds the box shuts down completely.
From Linux kernel 5.8.5 dmesg output: [ 4.992159] 5 cmdlinepart partitions found on MTD device pxa3xx_nand-0 [ 4.998869] Creating 5 MTD partitions on "pxa3xx_nand-0": [ 5.004489] 0x000000000000-0x000000180000 : "u-boot" [ 5.011986] 0x000000180000-0x0000001a0000 : "u-boot-env" [ 5.020327] 0x000000200000-0x000000800000 : "uImage" [ 5.028393] 0x000000800000-0x000000c00000 : "minirootfs" [ 5.036819] 0x000000c00000-0x000008000000 : "ubifs" [ 5.046779] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 5.055791] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 5.069036] libphy: Fixed MDIO Bus: probed [ 5.078776] libphy: orion_mdio_bus: probed [ 5.101027] mvneta d0074000.ethernet eth0: Using random mac address ca:12:4b:b8:64:79The full serial console output from the failing 5.8.5 boot and the full 'dmesg' output from the successful 5.8.5 boot are both attached.
Re: Debian on Netgear RN102 September 04, 2020 03:57AM |
Admin Registered: 14 years ago Posts: 19,288 |
/dev/mtd1 0x0000 0x80000 0x20000 4
Re: Debian on Netgear RN102 September 04, 2020 04:20AM |
Admin Registered: 14 years ago Posts: 19,288 |
Quote
Download at Dropbox
linux-5.8.5-mvebu-370xp-tld-1-bodhi.tar.bz2
md5:
17c3e1784dea18b2a3587a6ebb7aa894
sha256:
655646c0bd09b047b6c9ec198579cd2e345e19c5a8f32787a0979532a3b601d4
This tarball contains 6 files:
Quote
linux-image-5.8.5-mvebu-370xp-tld-1_1.0_armhf.deb
linux-headers-5.8.5-mvebu-370xp-tld-1_1.0_armhf.deb
zImage-5.8.5-mvebu-370xp-tld-1
config-5.8.5-mvebu-370xp-tld-1
linux-dtb-5.8.5-mvebu-370xp-tld-1.tar
linux-5.8.5-mvebu-370xp-tld-1.patch
linux-5.8.5-mvebu-370xp-tld-1.patch config-5.8.5-mvebu-370xp-tld-1Get the mainline kernel source tree for 5.8.5 from kernel.org (or clone Linux GitHub). Apply the patch. Copy the config to the source tree. And build.