Wheezy install fails on SATA February 14, 2013 02:51PM |
Registered: 11 years ago Posts: 20 |
rescue:/tmp# gdisk /dev/sda GPT fdisk (gdisk) version 0.8.5 Partition table scan: MBR: hybrid BSD: not present APM: not present GPT: present Found valid GPT with hybrid MBR; using GPT. Command (? for help): p Disk /dev/sda: 7814037168 sectors, 3.6 TiB Logical sector size: 512 bytes Disk identifier (GUID): 0493DA05-36C3-46E7-B87C-B31C5CC8E167 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 7814037134 Partitions will be aligned on 2048-sector boundaries Total free space is 2014 sectors (1007.0 KiB) Number Start (sector) End (sector) Size Code Name 1 2048 20973567 10.0 GiB 8300 sata-root 2 20973568 23070719 1024.0 MiB 8200 swap 3 23070720 7814037134 3.6 TiB 8300 goflexI attempted to install wheezy, and I got the following errors:
I: Configuring initramfs-tools... W: Failure while configuring base packages. This will be re-attempted up to five times. W: See /tmp/debian/debootstrap/debootstrap.log for details (possibly the package initramfs-tools is at fault) debootstrap failed. See /tmp/debian/debootstrap/debootstrap.log for more information.in /tmp/debian/debootstrap/debootstrap.log for more information. it says:
Setting up linux-image-kirkwood (3.2+46) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood Warning: root device does not exist Unable to abort; system will probably be broken! Unsupported platform. run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1 dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for flash-kernel ... Unsupported platform. dpkg: error processing flash-kernel (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools flash-kernel Setting up initramfs-tools (0.109) ... update-initramfs: deferring update (trigger activated) Setting up flash-kernel (3.3) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood Warning: root device does not exist Unable to abort; system will probably be broken! Unsupported platform. run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1 dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools
Re: Wheezy install fails on SATA February 19, 2013 06:38PM |
Registered: 11 years ago Posts: 5 |
Re: Wheezy install fails on SATA February 21, 2013 10:53AM |
Registered: 11 years ago Posts: 5 |