bodhi Wrote:
-------------------------------------------------------
> Tripleflix,
>
> Follow the instruction on creating rootfs:
>
Quote
Updated 15 April 2014:
>
> Rootfs Debian-3.14.0-kirkwood-tld-1 was
> uploaded.
>
> Please read each thread's 1st post completely
> before attempting the installation.
done, created a usb stick with debian on it.
now im halfway into with loading the new uboot, but.. i get this error:
/tmp # /usr/sbin/fw_printenv ethaddr
Warning: Bad CRC, using default environment
edit, ok i got a step further, i think.
after following the steps from
http://forum.doozan.com/read.php?2,11663, but with using the new uboot i now still get
# /usr/sbin/fw_printenv ethaddr
## Error: "ethaddr" not defined
for # /usr/sbin/fw_printenv i do not get crc errors anymore after using # /usr/sbin/nandwrite -s 786432 /dev/mtd0 uboot.environment
Edited 2 time(s). Last edit at 08/05/2014 04:34PM by Tripleflix.
