Can't boot debian from Pogoplug v2 April 06, 2013 04:59AM |
Registered: 11 years ago Posts: 17 |
Re: Can't boot debian from Pogoplug v2 April 06, 2013 11:07AM |
Registered: 11 years ago Posts: 17 |
U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1 GNU ld (Sourcery G++ Lite 2009q3-67) 2.19.51.20090709 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Loading file "/rescueme" from usb device 0:1 (usbda1) ** File not found /rescueme reading /rescueme.txt ** Unable to read "/rescueme.txt" from usb 0:1 ** Creating 1 MTD partitions on "nand0": 0x000002500000-0x000008000000 : "mtd=3" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=3" UBI: MTD device size: 91 MiB UBI: number of good PEBs: 728 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 0 UBI: available PEBs: 717 UBI: total number of reserved PEBs: 11 UBI: number of PEBs reserved for bad PEB handling: 7 UBI: max/mean erase counter: 1/1 UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19 Error reading superblock on volume 'ubi:rootfs'! Loading file "/boot/uImage" from usb device 0:1 (usbda1) ** File not found /boot/uImage ** Block device usb 1 not supported ** Block device usb 2 not supported ** Block device usb 3 not supported Loading file "/boot/uImage" from usb device 0:1 (usbda1) ** File not found /boot/uImage Loading file "/boot/uInitrd" from usb device 0:1 (usbda1) ** File not found /boot/uInitrd Wrong Image Format for bootm command ERROR: can't get kernel image! stopping USB.. ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000 Scanning JFFS2 FS: ........... read_nand_cached: error reading nand off 0x1f1d200 size 8192 byte done. read_nand_cached: error reading nand off 0x1f1c000 size 8192 bytes off = 0x1f1bbbc magic 0x1985 type 0xe002 node.totlen = 2484 ### JFFS2 load complete: 524288 bytes loaded to 0x800000 ## Starting application at 0x00800200 ...
Re: Can't boot debian from Pogoplug v2 April 06, 2013 02:31PM |
Registered: 11 years ago Posts: 149 |
Re: Can't boot debian from Pogoplug v2 April 06, 2013 03:07PM |
Registered: 11 years ago Posts: 17 |
Re: Can't boot debian from Pogoplug v2 April 06, 2013 03:16PM |
Registered: 11 years ago Posts: 149 |
Re: Can't boot debian from Pogoplug v2 April 06, 2013 03:39PM |
Registered: 11 years ago Posts: 17 |
Re: Can't boot debian from Pogoplug v2 April 06, 2013 04:09PM |
Registered: 11 years ago Posts: 149 |