Bricked GoFlex Home? :( June 04, 2013 10:56AM |
Registered: 11 years ago Posts: 19 |
cd /tmp wget http://projects.doozan.com/debian/kirkwood.debian-wheezy.sh chmod +x kirkwood.debian-wheezy.sh export PATH=$PATH:/usr/sbin:/sbin ./kirkwood.debian-wheezy.sh
Re: Bricked GoFlex Home? :( June 04, 2013 03:10PM |
Admin Registered: 13 years ago Posts: 18,821 |
> cd /tmp > wget > http://projects.doozan.com/debian/kirkwood.debian- > wheezy.sh > chmod +x kirkwood.debian-wheezy.sh > export PATH=$PATH:/usr/sbin:/sbin > ./kirkwood.debian-wheezy.sh >>
Re: Bricked GoFlex Home? :( June 04, 2013 03:15PM |
Registered: 11 years ago Posts: 19 |
wget http://jeff.doozan.com/debian/goflex/v0.6/v2.6.37/boot.tar.gz wget http://jeff.doozan.com/debian/goflex/v0.6/uInitrd tar -xzvf boot.ta.gzit seems that the device is loading, at least the lighter is blinking green, and i see usb stick lighter flashing, so it reads it for about 10 seconds and then stop... nothing appears.
Re: Bricked GoFlex Home? :( June 04, 2013 03:19PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked GoFlex Home? :( June 04, 2013 03:29PM |
Registered: 11 years ago Posts: 19 |
-bash-3.2# fdisk -l Disk /dev/sda: 8056 MB, 8056209408 bytes 255 heads, 63 sectors/track, 979 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 941 7558551 83 Linux /dev/sda2 942 979 305235 82 Linux swap / Solaris -bash-3.2# cd /tmp -bash-3.2# wget http://projects.doozan.com/debian/kirkwood.debian-wheezy.sh --17:22:13-- http://projects.doozan.com/debian/kirkwood.debian-wheezy.sh Resolving projects.doozan.com... 50.116.34.13 Connecting to projects.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 11159 (11K) [text/x-sh] Saving to: `kirkwood.debian-wheezy.sh' 100%[=======================================================================================================================================================>] 11,159 --.-K/s in 0.1s 17:22:14 (73.2 KB/s) - `kirkwood.debian-wheezy.sh' saved [11159/11159] -bash-3.2# chmod +x kirkwood.debian-wheezy.sh -bash-3.2# export PATH=$PATH:/usr/sbin:/sbin -bash-3.2# ./kirkwood.debian-wheezy.sh !!!!!! DANGER DANGER DANGER DANGER DANGER DANGER !!!!!! This script will replace the bootloader on /dev/mtd0. If you lose power while the bootloader is being flashed, your device could be left in an unusable state. This script will configure your Dockstar to boot Debian from a USB device. Before running this script, you should have used fdisk to create the following partitions: /dev/sda1 (Linux ext2, at least 400MB) /dev/sda2 (Linux swap, recommended 256MB) This script will DESTROY ALL EXISTING DATA on /dev/sda1 Please double check that the device on /dev/sda1 is the correct device. By typing ok, you agree to assume all liabilities and risks associated with running this installer. If everything looks good, type 'ok' to continue: ok --17:22:32-- http://projects.doozan.com/uboot/install_uboot_mtd0.sh Resolving projects.doozan.com... 50.116.34.13 Connecting to projects.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 18406 (18K) [text/x-sh] Saving to: `/tmp/install_uboot_mtd0.sh' 100%[=======================================================================================================================================================>] 18,406 61.2K/s in 0.3s 17:22:33 (61.2 KB/s) - `/tmp/install_uboot_mtd0.sh' saved [18406/18406] Installing Bootloader # checking for /usr/sbin/nandwrite... # checking for /usr/sbin/nanddump... # Installing /usr/sbin/nanddump... --17:22:33-- http://download.doozan.com/uboot/nanddump.md5 Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `/usr/sbin/nanddump.md5' [ <=> ] 32 --.-K/s in 0s 17:22:33 (1.29 MB/s) - `/usr/sbin/nanddump.md5' saved [32] --17:22:33-- http://download.doozan.com/uboot/nanddump Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 21286 (21K) [] Saving to: `/usr/sbin/nanddump' 100%[=======================================================================================================================================================>] 21,286 71.3K/s in 0.3s 17:22:34 (71.3 KB/s) - `/usr/sbin/nanddump' saved [21286/21286] # Successfully installed /usr/sbin/nanddump. # checking for /usr/sbin/flash_erase... # Installing /usr/sbin/flash_erase... --17:22:34-- http://download.doozan.com/uboot/flash_erase.md5 Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `/usr/sbin/flash_erase.md5' [ <=> ] 32 --.-K/s in 0s 17:22:35 (1.37 MB/s) - `/usr/sbin/flash_erase.md5' saved [32] --17:22:35-- http://download.doozan.com/uboot/flash_erase Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 12819 (13K) [] Saving to: `/usr/sbin/flash_erase' 100%[=======================================================================================================================================================>] 12,819 --.-K/s in 0.1s 17:22:35 (87.5 KB/s) - `/usr/sbin/flash_erase' saved [12819/12819] # Successfully installed /usr/sbin/flash_erase. # checking for /usr/sbin/fw_printenv... # Installing /usr/sbin/fw_printenv... --17:22:35-- http://download.doozan.com/uboot/fw_printenv.md5 Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `/usr/sbin/fw_printenv.md5' [ <=> ] 32 --.-K/s in 0s 17:22:36 (1.36 MB/s) - `/usr/sbin/fw_printenv.md5' saved [32] --17:22:36-- http://download.doozan.com/uboot/fw_printenv Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 668497 (653K) [] Saving to: `/usr/sbin/fw_printenv' 100%[=======================================================================================================================================================>] 668,497 228K/s in 2.9s 17:22:39 (228 KB/s) - `/usr/sbin/fw_printenv' saved [668497/668497] # Successfully installed /usr/sbin/fw_printenv. # checking for /etc/fw_env.config... # Installing /etc/fw_env.config... --17:22:39-- http://download.doozan.com/uboot/fw_env.config.md5 Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `/etc/fw_env.config.md5' [ <=> ] 32 --.-K/s in 0s 17:22:39 (1.41 MB/s) - `/etc/fw_env.config.md5' saved [32] --17:22:39-- http://download.doozan.com/uboot/fw_env.config Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 329 [] Saving to: `/etc/fw_env.config' 100%[=======================================================================================================================================================>] 329 --.-K/s in 0s 17:22:40 (14.2 MB/s) - `/etc/fw_env.config' saved [329/329] # Successfully installed /etc/fw_env.config. # Validating existing uBoot... Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x00000000 and ending at 0x00080000... --17:22:40-- http://jeff.doozan.com/uboot/valid-uboot.md5 Resolving jeff.doozan.com... 50.116.34.13 Connecting to jeff.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://projects.doozan.com/uboot/valid-uboot.md5 [following] --17:22:40-- http://projects.doozan.com/uboot/valid-uboot.md5 Resolving projects.doozan.com... 50.116.34.13 Connecting to projects.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1133 (1.1K) [text/plain] Saving to: `/tmp/valid-uboot.md5' 100%[=======================================================================================================================================================>] 1,133 --.-K/s in 0s 17:22:41 (41.7 MB/s) - `/tmp/valid-uboot.md5' saved [1133/1133] ## Valid uBoot detected: [dockstar original] # Installing uBoot ## Installing dockstar davygravy-2012-02-12 --17:22:41-- http://download.doozan.com/uboot/files/uboot/uboot.mtd0.dockstar.davygravy-2012-02-12.kwb.md5 Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `/tmp/uboot.mtd0.kwb.md5' [ <=> ] 32 --.-K/s in 0s 17:22:41 (1.36 MB/s) - `/tmp/uboot.mtd0.kwb.md5' saved [32] --17:22:41-- http://download.doozan.com/uboot/files/uboot/uboot.mtd0.dockstar.davygravy-2012-02-12.kwb Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 524288 (512K) [] Saving to: `/tmp/uboot.mtd0.kwb' 100%[=======================================================================================================================================================>] 524,288 201K/s in 2.5s 17:22:44 (201 KB/s) - `/tmp/uboot.mtd0.kwb' saved [524288/524288] Erase Total 4 Units Performing Flash Erase of length 131072 at offset 0x60000 done Writing data to block 0 at offset 0x0 Writing data to block 1 at offset 0x20000 Writing data to block 2 at offset 0x40000 Writing data to block 3 at offset 0x60000 Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x00000000 and ending at 0x00080000... ## Verifying new uBoot... --17:22:44-- http://download.doozan.com/uboot/files/uboot/uboot.mtd0.dockstar.davygravy-2012-02-12.kwb.md5 Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `/tmp/uboot.mtd0.kwb.md5' [ <=> ] 32 --.-K/s in 0s 17:22:45 (1.42 MB/s) - `/tmp/uboot.mtd0.kwb.md5' saved [32] # Verified successfully! # Installing uBoot environment --17:22:45-- http://download.doozan.com/uboot/files/environment/uboot.environment.md5 Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `/tmp/uboot.environment.md5' [ <=> ] 32 --.-K/s in 0s 17:22:46 (1.35 MB/s) - `/tmp/uboot.environment.md5' saved [32] --17:22:46-- http://download.doozan.com/uboot/files/environment/uboot.environment Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 131072 (128K) [] Saving to: `/tmp/uboot.environment' 100%[=======================================================================================================================================================>] 131,072 117K/s in 1.1s 17:22:47 (117 KB/s) - `/tmp/uboot.environment' saved [131072/131072] Erase Total 1 Units Performing Flash Erase of length 131072 at offset 0xc0000 done Writing data to block 6 at offset 0xc0000 # Verifying uBoot environment Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x000c0000 and ending at 0x000e0000... --17:22:47-- http://download.doozan.com/uboot/files/environment/uboot.environment.md5 Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `/tmp/uboot.environment.md5' [ <=> ] 32 --.-K/s in 0s 17:22:48 (1.47 MB/s) - `/tmp/uboot.environment.md5' saved [32] # Setting arcNumber to 2097 (SheevaPlug) # Note: if you have a kernel that supports your platform, you should use the proper arcNumber. # You can set the correct arcNumber by running the following command: /usr/sbin/fw_setenv arcNumber 2998 # uBoot installation has completed successfully. mke2fs 1.39 (29-May-2006) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 946560 inodes, 1889637 blocks 94481 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=1937768448 58 block groups 32768 blocks per group, 32768 fragments per group 16320 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632 Writing inode tables: done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 33 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. Setting up swapspace version 1, size = 312553 kB --17:24:41-- http://cdn.debian.net/debian/pool/main/d/debootstrap/debootstrap_1.0.26%2bsqueeze1_all.deb Resolving cdn.debian.net... 93.158.155.193 Connecting to cdn.debian.net|93.158.155.193|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 57492 (56K) [application/octet-stream] Saving to: `debootstrap.deb' 100%[=======================================================================================================================================================>] 57,492 --.-K/s in 0.01s 17:24:42 (4.10 MB/s) - `debootstrap.deb' saved [57492/57492] x - debian-binary x - control.tar.gz x - data.tar.gz ./ ./usr/ ./usr/sbin/ ./usr/sbin/debootstrap ./usr/share/ ./usr/share/man/ ./usr/share/man/man8/ ./usr/share/man/man8/debootstrap.8.gz ./usr/share/doc/ ./usr/share/doc/debootstrap/ ./usr/share/doc/debootstrap/README ./usr/share/doc/debootstrap/copyright ./usr/share/doc/debootstrap/changelog.gz ./usr/share/debootstrap/ ./usr/share/debootstrap/functions ./usr/share/debootstrap/scripts/ ./usr/share/debootstrap/scripts/feisty ./usr/share/debootstrap/scripts/sarge.buildd ./usr/share/debootstrap/scripts/gutsy ./usr/share/debootstrap/scripts/woody.buildd ./usr/share/debootstrap/scripts/breezy ./usr/share/debootstrap/scripts/warty ./usr/share/debootstrap/scripts/sarge.fakechroot ./usr/share/debootstrap/scripts/hoary ./usr/share/debootstrap/scripts/warty.buildd ./usr/share/debootstrap/scripts/sid ./usr/share/debootstrap/scripts/potato ./usr/share/debootstrap/scripts/edgy ./usr/share/debootstrap/scripts/sarge ./usr/share/debootstrap/scripts/dapper ./usr/share/debootstrap/scripts/woody ./usr/share/debootstrap/scripts/hoary.buildd ./usr/share/debootstrap/devices.tar.gz ./usr/share/debootstrap/scripts/wheezy ./usr/share/debootstrap/scripts/karmic ./usr/share/debootstrap/scripts/testing ./usr/share/debootstrap/scripts/stable ./usr/share/debootstrap/scripts/lucid ./usr/share/debootstrap/scripts/maverick ./usr/share/debootstrap/scripts/unstable ./usr/share/debootstrap/scripts/squeeze ./usr/share/debootstrap/scripts/etch ./usr/share/debootstrap/scripts/jaunty ./usr/share/debootstrap/scripts/hardy ./usr/share/debootstrap/scripts/etch-m68k ./usr/share/debootstrap/scripts/natty ./usr/share/debootstrap/scripts/lenny ./usr/share/debootstrap/scripts/intrepid # checking for /usr/share/debootstrap/pkgdetails... # Installing /usr/share/debootstrap/pkgdetails... --17:24:42-- http://download.doozan.com/debian/pkgdetails.md5 Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `/usr/share/debootstrap/pkgdetails.md5' [ <=> ] 32 --.-K/s in 0s 17:24:42 (1.33 MB/s) - `/usr/share/debootstrap/pkgdetails.md5' saved [32] --17:24:42-- http://download.doozan.com/debian/pkgdetails Resolving download.doozan.com... 50.116.34.13 Connecting to download.doozan.com|50.116.34.13|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 572767 (559K) [] Saving to: `/usr/share/debootstrap/pkgdetails' 100%[=======================================================================================================================================================>] 572,767 153K/s in 3.7s 17:24:46 (153 KB/s) - `/usr/share/debootstrap/pkgdetails' saved [572767/572767] # Successfully installed /usr/share/debootstrap/pkgdetails. # Starting debootstrap installation E: unrecognized or invalid option --no-check-gpg debootstrap failed. See /tmp/debian/debootstrap/debootstrap.log for more information. -bash-3.2# reboot Broadcast message from root (pts/0) (Tue Jun 4 17:25:07 2013): The system is going down for reboot NOW!
Re: Bricked GoFlex Home? :( June 04, 2013 03:57PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked GoFlex Home? :( June 05, 2013 07:09AM |
Registered: 11 years ago Posts: 19 |
root@debian-kirkwood-wide:~# fdisk -l Disk /dev/mtdblock0: 1 MB, 1048576 bytes 255 heads, 63 sectors/track, 0 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mtdblock0 doesn't contain a valid partition table Disk /dev/mtdblock1: 4 MB, 4194304 bytes 255 heads, 63 sectors/track, 0 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xee020f10 Disk /dev/mtdblock1 doesn't contain a valid partition table Disk /dev/mtdblock2: 33 MB, 33554432 bytes 255 heads, 63 sectors/track, 4 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xffffffff Disk /dev/mtdblock2 doesn't contain a valid partition table Disk /dev/mtdblock3: 229 MB, 229638144 bytes 255 heads, 63 sectors/track, 27 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xffffffff Disk /dev/mtdblock3 doesn't contain a valid partition table Disk /dev/sda: 4051 MB, 4051697664 bytes 255 heads, 63 sectors/track, 492 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c2c22 Device Boot Start End Blocks Id System /dev/sda1 * 294 460 1341427+ 83 Linux /dev/sda2 461 492 257040 82 Linux swap / Solaris root@debian-kirkwood-wide:~#
cd /tmp wget http://projects.doozan.com/debian/dockstar.debian-squeeze.sh chmod +x dockstar.debian-squeeze.sh export PATH=$PATH:/usr/sbin:/sbin ./dockstar.debian-squeeze.sh
Re: Bricked GoFlex Home? :( June 05, 2013 03:24PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked GoFlex Home? :( June 05, 2013 03:50PM |
Registered: 11 years ago Posts: 19 |
root@debian-kirkwood-wide:~# dmesg [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.2-kirkwood-dg (davygravy@bitbaker64) (gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-70) ) #1 Mon Apr 23 17:09:27 CDT 2012 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Seagate FreeAgent DockStar [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c043cd24, node_mem_map c04a4000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] allocated 262144 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 118056k/118056k available, 13016k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc03e07fc (3938 kB) [ 0.000000] .init : 0xc03e1000 - 0xc0404000 ( 140 kB) [ 0.000000] .data : 0xc0404000 - 0xc043f1a0 ( 237 kB) [ 0.000000] .bss : 0xc043f1c4 - 0xc04a3228 ( 401 kB) [ 0.000000] NR_IRQS:114 [ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0 [ 0.000000] gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1 [ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms [ 0.000000] Console: colour dummy device 80x30 [ 11.091493] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) [ 11.181381] pid_max: default: 32768 minimum: 301 [ 11.181506] Security Framework initialized [ 11.181583] Mount-cache hash table entries: 512 [ 11.181933] Initializing cgroup subsys cpuacct [ 11.181949] Initializing cgroup subsys memory [ 11.181987] Initializing cgroup subsys devices [ 11.182000] Initializing cgroup subsys freezer [ 11.182009] Initializing cgroup subsys net_cls [ 11.182018] Initializing cgroup subsys blkio [ 11.182044] Initializing cgroup subsys perf_event [ 11.182132] CPU: Testing write buffer coherency: ok [ 11.182413] Setting up static identity map for 0x2c9590 - 0x2c95cc [ 11.183529] devtmpfs: initialized [ 11.185312] print_constraints: dummy: [ 11.185565] NET: Registered protocol family 16 [ 11.186232] Kirkwood: MV88F6281-A1, TCLK=200000000. [ 11.186247] Feroceon L2: Enabling L2 [ 11.186283] Feroceon L2: Cache support initialised. [ 11.186811] initial MPP regs: 01111111 11113322 00001111 00100000 00000000 00000000 00000000 [ 11.186834] final MPP regs: 01111111 11113322 00001111 00000000 00000000 00000000 00000000 [ 11.188802] bio: create slab <bio-0> at 0 [ 11.189172] vgaarb: loaded [ 11.189659] Switching to clocksource orion_clocksource [ 11.203690] NET: Registered protocol family 2 [ 11.203922] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 11.204601] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 11.204702] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 11.204761] TCP: Hash tables configured (established 4096 bind 4096) [ 11.204771] TCP reno registered [ 11.204781] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 11.204803] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 11.205020] NET: Registered protocol family 1 [ 11.205054] PCI: CLS 0 bytes, default 32 [ 11.205211] Unpacking initramfs... [ 11.771027] Freeing initrd memory: 6840K [ 11.771041] NetWinder Floating Point Emulator V0.97 (double precision) [ 11.771725] audit: initializing netlink socket (disabled) [ 11.771766] type=2000 audit(0.670:1): initialized [ 11.773177] VFS: Disk quotas dquot_6.5.2 [ 11.773275] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.773380] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 11.773725] msgmni has been set to 243 [ 11.775276] alg: No test for stdrng (krng) [ 11.775378] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 11.775392] io scheduler noop registered [ 11.775400] io scheduler deadline registered [ 11.775449] io scheduler cfq registered (default) [ 11.775533] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 11.775567] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 11.809731] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 11.849727] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 11.889726] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 11.929725] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 11.930089] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 11.950596] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 12.415637] console [ttyS0] enabled [ 12.420053] NAND device: Manufacturer ID: 0x98, Chip ID: 0xda (Toshiba NAND 256MiB 3,3V 8-bit) [ 12.428707] Scanning device for bad blocks [ 12.584978] 4 cmdlinepart partitions found on MTD device orion_nand [ 12.591288] Creating 4 MTD partitions on "orion_nand": [ 12.596454] 0x000000000000-0x000000100000 : "u-boot" [ 12.602233] 0x000000100000-0x000000500000 : "uImage" [ 12.607975] 0x000000500000-0x000002500000 : "rootfs" [ 12.613784] 0x000002500000-0x000010000000 : "data" [ 12.620223] mousedev: PS/2 mouse device common for all mice [ 12.626199] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 12.632149] i2c /dev entries driver [ 12.635778] cpuidle: using governor ladder [ 12.639979] cpuidle: using governor menu [ 12.644054] Registered led device: dockstar:green:health [ 12.644150] Registered led device: dockstar:orange:misc [ 12.645046] TCP cubic registered [ 12.648289] NET: Registered protocol family 17 [ 12.652785] Registering the dns_resolver key type [ 12.657588] Gating clock of unused units [ 12.657597] before: 0x00dfc3fd [ 12.657604] after: 0x00c701c9 [ 12.658020] registered taskstats version 1 [ 12.662610] rtc-mv rtc-mv: setting system clock to 2013-06-05 20:48:10 UTC (1370465290) [ 12.670704] Initializing network drop monitor service [ 12.676361] Freeing init memory: 140K [ 12.730066] udev[47]: starting version 164 [ 12.788426] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 12.902572] usbcore: registered new interface driver usbfs [ 12.915214] mv643xx_eth smi: probed [ 12.948375] usbcore: registered new interface driver hub [ 12.958689] usbcore: registered new device driver usb [ 12.966243] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 02:50:43:d5:72:7b [ 12.977699] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.986777] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 12.993432] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 13.029743] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 13.049702] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 13.055721] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.062560] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.069829] usb usb1: Product: Marvell Orion EHCI [ 13.074558] usb usb1: Manufacturer: Linux 3.3.2-kirkwood-dg ehci_hcd [ 13.080949] usb usb1: SerialNumber: orion-ehci.0 [ 13.086865] hub 1-0:1.0: USB hub found [ 13.090666] hub 1-0:1.0: 1 port detected [ 13.409707] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 13.592144] usb 1-1: New USB device found, idVendor=8564, idProduct=1000 [ 13.598876] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 13.606053] usb 1-1: Product: Mass Storage Device [ 13.610790] usb 1-1: Manufacturer: JetFlash [ 13.614988] usb 1-1: SerialNumber: 74V1W014QCS7GK6Q [ 13.641145] SCSI subsystem initialized [ 13.647526] usbcore: registered new interface driver uas [ 13.657421] Initializing USB Mass Storage driver... [ 13.662644] scsi0 : usb-storage 1-1:1.0 [ 13.667843] usbcore: registered new interface driver usb-storage [ 13.673908] USB Mass Storage support registered. [ 15.157238] scsi 0:0:0:0: Direct-Access JetFlash Transcend 4GB 1100 PQ: 0 ANSI: 0 CCS [ 15.179201] sd 0:0:0:0: [sda] 7913472 512-byte logical blocks: (4.05 GB/3.77 GiB) [ 15.187798] sd 0:0:0:0: [sda] Write Protect is off [ 15.192640] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 15.193418] sd 0:0:0:0: [sda] No Caching mode page present [ 15.198933] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 15.209166] sd 0:0:0:0: [sda] No Caching mode page present [ 15.214701] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 15.223049] sda: sda1 sda2 [ 15.229412] sd 0:0:0:0: [sda] No Caching mode page present [ 15.234950] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 15.241084] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 23.865430] udev[142]: starting version 164 [ 28.109808] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 45.523228] NET: Registered protocol family 10 [ 45.650544] sshd (503): /proc/503/oom_adj is deprecated, please use /proc/503/oom_score_adj instead. [ 56.469840] eth0: no IPv6 routers present root@debian-kirkwood-wide:~#
root@debian-kirkwood-wide:~# fw_printenv ethact=egiga0 bootdelay=3 baudrate=115200 mainlineLinux=yes console=ttyS0,115200 led_init=green blinking led_exit=green off led_error=orange blinking mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) mtdids=nand0=orion_nand partition=nand0,2 stdin=serial stdout=serial stderr=serial rescue_installed=0 rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi force_rescue=0 force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi ubifs_mtd=3 ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; fi usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; setenv usb_root /dev/$dev; fi; done usb_scan_list=1 2 3 4 usb_scan_1=usb=0:1 dev=sda1 usb_scan_2=usb=1:1 dev=sdb1 usb_scan_3=usb=2:1 dev=sdc1 usb_scan_4=usb=3:1 dev=sdd1 usb_init=run usb_scan usb_device=0:1 usb_root=/dev/sda1 usb_rootfstype=ext2 usb_rootdelay=10 usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset arcNumber=2097
Re: Bricked GoFlex Home? :( June 05, 2013 04:34PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked GoFlex Home? :( June 05, 2013 05:40PM |
Registered: 11 years ago Posts: 19 |
fw_setenv serverip 192.168.11.12 fw_setenv ipaddr 192.168.11.22 fw_setenv if_netconsole 'ping $serverip' fw_setenv start_netconsole 'setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;' fw_setenv preboot 'run if_netconsole start_netconsole'11.12 is my notebook ip address
nc -l -u -p 6666 & nc -u 192.168.11.22 6666
root@dave:~# nc -l -u -p 6666 & [2] 17749 root@dave:~# nc -u 192.168.11.22 6666 U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1 GNU ld (Sourcery G++ Lite 2009q3-67) 2.19.51.20090709 Hit any key to stop autoboot: 1 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Loading file "/rescueme" from usb device 0:1 (usbda1) ** File not found /rescueme reading /rescueme.txt ** Unable to read "/rescueme.txt" from usb 0:1 ** Creating 1 MTD partitions on "nand0": 0x000002500000-0x000010000000 : "mtd=3" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI error: validate_ec_hdr: bad VID header offset 2048, expected 512 UBI error: validate_ec_hdr: bad EC header UBI error: ubi_io_read_ec_hdr: validation failed for PEB 0 UBI error: ubi_init: cannot attach mtd1 UBI error: ubi_init: UBI error: cannot initialize UBI, error -22 UBI init error 22 Loading file "/boot/uImage" from usb device 0:1 (usbda1) 1 bytes read Found bootable drive on usb 0:1 Loading file "/boot/uImage" from usb device 0:1 (usbda1) 2279256 bytes read Loading file "/boot/uInitrd" from usb device 0:1 (usbda1) 7004538 bytes read ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-3.3.2 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2279192 Bytes = 2.2 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-3.3.2-kirkwood-dg Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7004474 Bytes = 6.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ...
Re: Bricked GoFlex Home? :( June 05, 2013 06:11PM |
Admin Registered: 13 years ago Posts: 18,821 |
nc -up 6666 192.168.11.22 6666
boot
Re: Bricked GoFlex Home? :( June 05, 2013 06:46PM |
Registered: 11 years ago Posts: 19 |
root@dave:~# nc -u 192.168.11.22 6666 U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1 GNU ld (Sourcery G++ Lite 2009q3-67) 2.19.51.20090709 Hit any key to stop autoboot: 7
nc -up 6666 192.168.11.22 6666dosn't work, it says
root@dave:~# nc -up 6666 192.168.11.22 6666 nc: bind failed: Address already in use
Re: Bricked GoFlex Home? :( June 05, 2013 08:14PM |
Registered: 11 years ago Posts: 19 |
root@debian-kirkwood-wide:~# dmesg [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.2-kirkwood-dg (davygravy@bitbaker64) (gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-70) ) #1 Mon Apr 23 17:09:27 CDT 2012 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Seagate FreeAgent DockStar [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c043cd24, node_mem_map c04a4000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] allocated 262144 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 118056k/118056k available, 13016k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc03e07fc (3938 kB) [ 0.000000] .init : 0xc03e1000 - 0xc0404000 ( 140 kB) [ 0.000000] .data : 0xc0404000 - 0xc043f1a0 ( 237 kB) [ 0.000000] .bss : 0xc043f1c4 - 0xc04a3228 ( 401 kB) [ 0.000000] NR_IRQS:114 [ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0 [ 0.000000] gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1 [ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms [ 0.000000] Console: colour dummy device 80x30 [ 18.995405] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) [ 19.085291] pid_max: default: 32768 minimum: 301 [ 19.085417] Security Framework initialized [ 19.085494] Mount-cache hash table entries: 512 [ 19.085844] Initializing cgroup subsys cpuacct [ 19.085859] Initializing cgroup subsys memory [ 19.085896] Initializing cgroup subsys devices [ 19.085908] Initializing cgroup subsys freezer [ 19.085917] Initializing cgroup subsys net_cls [ 19.085926] Initializing cgroup subsys blkio [ 19.085951] Initializing cgroup subsys perf_event [ 19.086038] CPU: Testing write buffer coherency: ok [ 19.086318] Setting up static identity map for 0x2c9590 - 0x2c95cc [ 19.087436] devtmpfs: initialized [ 19.089219] print_constraints: dummy: [ 19.089467] NET: Registered protocol family 16 [ 19.090132] Kirkwood: MV88F6281-A1, TCLK=200000000. [ 19.090147] Feroceon L2: Enabling L2 [ 19.090182] Feroceon L2: Cache support initialised. [ 19.090712] initial MPP regs: 01111111 11113322 00001111 00100000 00000000 00000000 00000000 [ 19.090735] final MPP regs: 01111111 11113322 00001111 00000000 00000000 00000000 00000000 [ 19.092705] bio: create slab <bio-0> at 0 [ 19.093076] vgaarb: loaded [ 19.093562] Switching to clocksource orion_clocksource [ 19.107587] NET: Registered protocol family 2 [ 19.107818] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 19.108495] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 19.108595] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 19.108654] TCP: Hash tables configured (established 4096 bind 4096) [ 19.108664] TCP reno registered [ 19.108674] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 19.108696] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 19.108914] NET: Registered protocol family 1 [ 19.108947] PCI: CLS 0 bytes, default 32 [ 19.109105] Unpacking initramfs... [ 19.674972] Freeing initrd memory: 6840K [ 19.674986] NetWinder Floating Point Emulator V0.97 (double precision) [ 19.675668] audit: initializing netlink socket (disabled) [ 19.675709] type=2000 audit(0.670:1): initialized [ 19.677119] VFS: Disk quotas dquot_6.5.2 [ 19.677215] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 19.677321] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 19.677667] msgmni has been set to 243 [ 19.679217] alg: No test for stdrng (krng) [ 19.679320] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 19.679334] io scheduler noop registered [ 19.679342] io scheduler deadline registered [ 19.679392] io scheduler cfq registered (default) [ 19.679476] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 19.679511] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 19.713634] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 19.753631] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 19.793629] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 19.833629] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 19.833991] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 19.854495] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 20.319540] console [ttyS0] enabled [ 20.323951] NAND device: Manufacturer ID: 0x98, Chip ID: 0xda (Toshiba NAND 256MiB 3,3V 8-bit) [ 20.332609] Scanning device for bad blocks [ 20.488825] 4 cmdlinepart partitions found on MTD device orion_nand [ 20.495129] Creating 4 MTD partitions on "orion_nand": [ 20.500295] 0x000000000000-0x000000100000 : "u-boot" [ 20.506076] 0x000000100000-0x000000500000 : "uImage" [ 20.511827] 0x000000500000-0x000002500000 : "rootfs" [ 20.517634] 0x000002500000-0x000010000000 : "data" [ 20.524071] mousedev: PS/2 mouse device common for all mice [ 20.530044] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 20.535991] i2c /dev entries driver [ 20.539619] cpuidle: using governor ladder [ 20.543820] cpuidle: using governor menu [ 20.547896] Registered led device: dockstar:green:health [ 20.547992] Registered led device: dockstar:orange:misc [ 20.548886] TCP cubic registered [ 20.552131] NET: Registered protocol family 17 [ 20.556627] Registering the dns_resolver key type [ 20.561428] Gating clock of unused units [ 20.561437] before: 0x00dfc3fd [ 20.561445] after: 0x00c701c9 [ 20.561861] registered taskstats version 1 [ 20.566448] rtc-mv rtc-mv: setting system clock to 2013-06-06 01:08:26 UTC (1370480906) [ 20.574546] Initializing network drop monitor service [ 20.580204] Freeing init memory: 140K [ 20.633967] udev[47]: starting version 164 [ 20.690978] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 20.741298] usbcore: registered new interface driver usbfs [ 20.816218] mv643xx_eth smi: probed [ 20.851860] usbcore: registered new interface driver hub [ 20.861694] usbcore: registered new device driver usb [ 20.869664] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 02:50:43:ce:2f:95 [ 20.881160] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 20.890605] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 20.895948] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 20.933651] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 20.953606] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 20.959633] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 20.966476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.973744] usb usb1: Product: Marvell Orion EHCI [ 20.978469] usb usb1: Manufacturer: Linux 3.3.2-kirkwood-dg ehci_hcd [ 20.984862] usb usb1: SerialNumber: orion-ehci.0 [ 20.990808] hub 1-0:1.0: USB hub found [ 20.994614] hub 1-0:1.0: 1 port detected [ 21.313611] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 21.496111] usb 1-1: New USB device found, idVendor=8564, idProduct=1000 [ 21.502849] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 21.510027] usb 1-1: Product: Mass Storage Device [ 21.514762] usb 1-1: Manufacturer: JetFlash [ 21.518961] usb 1-1: SerialNumber: 74V1W014QCS7GK6Q [ 21.545105] SCSI subsystem initialized [ 21.551482] usbcore: registered new interface driver uas [ 21.561379] Initializing USB Mass Storage driver... [ 21.566599] scsi0 : usb-storage 1-1:1.0 [ 21.571803] usbcore: registered new interface driver usb-storage [ 21.577862] USB Mass Storage support registered. [ 23.035079] scsi 0:0:0:0: Direct-Access JetFlash Transcend 4GB 1100 PQ: 0 ANSI: 0 CCS [ 23.056913] sd 0:0:0:0: [sda] 7913472 512-byte logical blocks: (4.05 GB/3.77 GiB) [ 23.065641] sd 0:0:0:0: [sda] Write Protect is off [ 23.070462] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 23.071133] sd 0:0:0:0: [sda] No Caching mode page present [ 23.076659] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 23.086882] sd 0:0:0:0: [sda] No Caching mode page present [ 23.092398] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 23.100768] sda: sda1 sda2 [ 23.107007] sd 0:0:0:0: [sda] No Caching mode page present [ 23.112524] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 23.118664] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 31.765061] udev[142]: starting version 164 [ 35.959317] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 52.466528] NET: Registered protocol family 10 [ 52.602841] sshd (497): /proc/497/oom_adj is deprecated, please use /proc/497/oom_score_adj instead. [ 62.643735] eth0: no IPv6 routers present root@debian-kirkwood-wide:~#
Re: Bricked GoFlex Home? :( June 05, 2013 09:15PM |
Registered: 12 years ago Posts: 92 |
Re: Bricked GoFlex Home? :( June 05, 2013 10:58PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked GoFlex Home? :( June 06, 2013 03:42AM |
Registered: 11 years ago Posts: 19 |
daveopc@dave:~$ ssh root@192.168.11.28 root@192.168.11.28's password: Linux debian-kirkwood-wide 3.3.2-kirkwood-dg #1 Mon Apr 23 17:09:27 CDT 2012 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Thu Jun 6 01:00:41 2013 from 192.168.11.10 root@debian-kirkwood-wide:~# fw_setenv arcNumber 3338 root@debian-kirkwood-wide:~# shutdown -r now
root@debian-kirkwood-wide:~# fw_printenv arcNumber arcNumber=3338
root@debian-kirkwood-wide:~# fw_setenv machid D0A root@debian-kirkwood-wide:~# reboot
root@debian-kirkwood-wide:~# dmesg [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.2-kirkwood-dg (davygravy@bitbaker64) (gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-70) ) #1 Mon Apr 23 17:09:27 CDT 2012 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Seagate GoFlex Home [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c043cd24, node_mem_map c04a4000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] allocated 262144 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 118056k/118056k available, 13016k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc03e07fc (3938 kB) [ 0.000000] .init : 0xc03e1000 - 0xc0404000 ( 140 kB) [ 0.000000] .data : 0xc0404000 - 0xc043f1a0 ( 237 kB) [ 0.000000] .bss : 0xc043f1c4 - 0xc04a3228 ( 401 kB) [ 0.000000] NR_IRQS:114 [ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0 [ 0.000000] gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1 [ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms [ 0.000000] Console: colour dummy device 80x30 [ 19.001673] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) [ 19.091557] pid_max: default: 32768 minimum: 301 [ 19.091684] Security Framework initialized [ 19.091763] Mount-cache hash table entries: 512 [ 19.092113] Initializing cgroup subsys cpuacct [ 19.092128] Initializing cgroup subsys memory [ 19.092166] Initializing cgroup subsys devices [ 19.092178] Initializing cgroup subsys freezer [ 19.092186] Initializing cgroup subsys net_cls [ 19.092194] Initializing cgroup subsys blkio [ 19.092218] Initializing cgroup subsys perf_event [ 19.092306] CPU: Testing write buffer coherency: ok [ 19.092586] Setting up static identity map for 0x2c9590 - 0x2c95cc [ 19.093695] devtmpfs: initialized [ 19.095478] print_constraints: dummy: [ 19.095732] NET: Registered protocol family 16 [ 19.096397] Kirkwood: MV88F6281-A1, TCLK=200000000. [ 19.096412] Feroceon L2: Enabling L2 [ 19.096448] Feroceon L2: Cache support initialised. [ 19.096978] initial MPP regs: 01111111 11113322 00001111 00100000 00000000 00000000 00000000 [ 19.097001] final MPP regs: 01111111 11113322 00001111 00000000 00000000 00000000 00000000 [ 19.099034] bio: create slab <bio-0> at 0 [ 19.099398] vgaarb: loaded [ 19.099894] Switching to clocksource orion_clocksource [ 19.113922] NET: Registered protocol family 2 [ 19.114154] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 19.114834] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 19.114934] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 19.114993] TCP: Hash tables configured (established 4096 bind 4096) [ 19.115003] TCP reno registered [ 19.115013] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 19.115035] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 19.115253] NET: Registered protocol family 1 [ 19.115287] PCI: CLS 0 bytes, default 32 [ 19.115445] Unpacking initramfs... [ 19.681279] Freeing initrd memory: 6840K [ 19.681293] NetWinder Floating Point Emulator V0.97 (double precision) [ 19.681977] audit: initializing netlink socket (disabled) [ 19.682019] type=2000 audit(0.670:1): initialized [ 19.683438] VFS: Disk quotas dquot_6.5.2 [ 19.683536] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 19.683640] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 19.683984] msgmni has been set to 243 [ 19.685533] alg: No test for stdrng (krng) [ 19.685638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 19.685651] io scheduler noop registered [ 19.685659] io scheduler deadline registered [ 19.685708] io scheduler cfq registered (default) [ 19.685793] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 19.685827] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 19.719965] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 19.759961] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 19.799961] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 19.839961] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 19.840315] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 19.860812] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 20.325249] console [ttyS0] enabled [ 20.329711] NAND device: Manufacturer ID: 0x98, Chip ID: 0xda (Toshiba NAND 256MiB 3,3V 8-bit) [ 20.338392] Scanning device for bad blocks [ 20.556407] 4 cmdlinepart partitions found on MTD device orion_nand [ 20.562716] Creating 4 MTD partitions on "orion_nand": [ 20.567882] 0x000000000000-0x000000100000 : "u-boot" [ 20.573678] 0x000000100000-0x000000500000 : "uImage" [ 20.579414] 0x000000500000-0x000002500000 : "rootfs" [ 20.585224] 0x000002500000-0x000010000000 : "data" [ 20.591666] mousedev: PS/2 mouse device common for all mice [ 20.597631] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 20.603582] i2c /dev entries driver [ 20.607211] cpuidle: using governor ladder [ 20.611416] cpuidle: using governor menu [ 20.615485] Registered led device: status:green:health [ 20.615580] Registered led device: status:orange:fault [ 20.615685] Registered led device: status:white:misc [ 20.616581] TCP cubic registered [ 20.619823] NET: Registered protocol family 17 [ 20.624320] Registering the dns_resolver key type [ 20.629076] Gating clock of unused units [ 20.629085] before: 0x00dfc3fd [ 20.629092] after: 0x00c741c9 [ 20.629518] registered taskstats version 1 [ 20.634109] rtc-mv rtc-mv: setting system clock to 2013-06-06 08:24:52 UTC (1370507092) [ 20.642210] Initializing network drop monitor service [ 20.647862] Freeing init memory: 140K [ 20.700301] udev[47]: starting version 164 [ 20.747205] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 20.846254] usbcore: registered new interface driver usbfs [ 20.856945] SCSI subsystem initialized [ 20.896306] mv643xx_eth smi: probed [ 20.930912] usbcore: registered new interface driver hub [ 20.956580] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 02:50:43:88:10:1a [ 20.975172] usbcore: registered new device driver usb [ 20.982709] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 20.993836] libata version 3.00 loaded. [ 20.995642] sata_mv sata_mv.0: version 1.28 [ 20.995733] sata_mv sata_mv.0: slots 32 ports 1 [ 21.004562] scsi0 : sata_mv [ 21.007983] ata1: SATA max UDMA/133 irq 21 [ 21.012288] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 21.018850] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 21.050011] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 21.069962] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 21.075984] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 21.082824] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.090093] usb usb1: Product: Marvell Orion EHCI [ 21.094818] usb usb1: Manufacturer: Linux 3.3.2-kirkwood-dg ehci_hcd [ 21.101210] usb usb1: SerialNumber: orion-ehci.0 [ 21.106728] hub 1-0:1.0: USB hub found [ 21.110531] hub 1-0:1.0: 1 port detected [ 21.359948] ata1: SATA link down (SStatus 0 SControl F300) [ 21.429964] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 21.612400] usb 1-1: New USB device found, idVendor=8564, idProduct=1000 [ 21.619136] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 21.626318] usb 1-1: Product: Mass Storage Device [ 21.631061] usb 1-1: Manufacturer: JetFlash [ 21.635266] usb 1-1: SerialNumber: 74V1W014QCS7GK6Q [ 21.663476] usbcore: registered new interface driver uas [ 21.673492] Initializing USB Mass Storage driver... [ 21.678689] scsi1 : usb-storage 1-1:1.0 [ 21.683836] usbcore: registered new interface driver usb-storage [ 21.689870] USB Mass Storage support registered. [ 23.183620] scsi 1:0:0:0: Direct-Access JetFlash Transcend 4GB 1100 PQ: 0 ANSI: 0 CCS [ 23.205702] sd 1:0:0:0: [sda] 7913472 512-byte logical blocks: (4.05 GB/3.77 GiB) [ 23.214177] sd 1:0:0:0: [sda] Write Protect is off [ 23.218995] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 23.219670] sd 1:0:0:0: [sda] No Caching mode page present [ 23.225200] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 23.235420] sd 1:0:0:0: [sda] No Caching mode page present [ 23.240953] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 23.249427] sda: sda1 sda2 [ 23.255670] sd 1:0:0:0: [sda] No Caching mode page present [ 23.261200] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 23.267320] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 32.494586] udev[155]: starting version 164 [ 36.687843] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 54.042805] NET: Registered protocol family 10 [ 54.203151] sshd (511): /proc/511/oom_adj is deprecated, please use /proc/511/oom_score_adj instead. [ 64.840078] eth0: no IPv6 routers present
root@debian-kirkwood-wide:~# fdisk -l Disk /dev/mtdblock0: 1 MB, 1048576 bytes 255 heads, 63 sectors/track, 0 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mtdblock0 doesn't contain a valid partition table Disk /dev/mtdblock1: 4 MB, 4194304 bytes 255 heads, 63 sectors/track, 0 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xee020f10 Disk /dev/mtdblock1 doesn't contain a valid partition table Disk /dev/mtdblock2: 33 MB, 33554432 bytes 255 heads, 63 sectors/track, 4 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xffffffff Disk /dev/mtdblock2 doesn't contain a valid partition table Disk /dev/mtdblock3: 229 MB, 229638144 bytes 255 heads, 63 sectors/track, 27 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xffffffff Disk /dev/mtdblock3 doesn't contain a valid partition table Disk /dev/sda: 4051 MB, 4051697664 bytes 255 heads, 63 sectors/track, 492 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c2c22 Device Boot Start End Blocks Id System /dev/sda1 * 294 460 1341427+ 83 Linux /dev/sda2 461 492 257040 82 Linux swap / Solaris root@debian-kirkwood-wide:~# fdisk -l Disk /dev/mtdblock0: 1 MB, 1048576 bytes 255 heads, 63 sectors/track, 0 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mtdblock0 doesn't contain a valid partition table Disk /dev/mtdblock1: 4 MB, 4194304 bytes 255 heads, 63 sectors/track, 0 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xee020f10 Disk /dev/mtdblock1 doesn't contain a valid partition table Disk /dev/mtdblock2: 33 MB, 33554432 bytes 255 heads, 63 sectors/track, 4 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xffffffff Disk /dev/mtdblock2 doesn't contain a valid partition table Disk /dev/mtdblock3: 229 MB, 229638144 bytes 255 heads, 63 sectors/track, 27 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xffffffff Disk /dev/mtdblock3 doesn't contain a valid partition table Disk /dev/sda: 4051 MB, 4051697664 bytes 255 heads, 63 sectors/track, 492 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c2c22 Device Boot Start End Blocks Id System /dev/sda1 * 294 460 1341427+ 83 Linux /dev/sda2 461 492 257040 82 Linux swap / Solaris Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 2433 19543041 83 Linux Partition 1 does not start on physical sector boundary. /dev/sdb2 2434 243201 1933968960 83 Linux Partition 2 does not start on physical sector boundary.
Re: Bricked GoFlex Home? :( June 06, 2013 05:07AM |
Admin Registered: 13 years ago Posts: 18,821 |
> [ 20.993836] libata version 3.00 loaded. > [ 20.995642] sata_mv sata_mv.0: version 1.28 > [ 20.995733] sata_mv sata_mv.0: slots 32 ports > 1 > [ 21.004562] scsi0 : sata_mv > [ 21.007983] ata1: SATA max UDMA/133 irq 21 >
> Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes > 255 heads, 63 sectors/track, 243201 cylinders > Units = cylinders of 16065 * 512 = 8225280 bytes > Sector size (logical/physical): 512 bytes / 4096 > bytes > I/O size (minimum/optimal): 4096 bytes / 4096 > bytes > Disk identifier: 0x00000000 > > Device Boot Start End Blocks > Id System > /dev/sdb1 1 2433 19543041 > 83 Linux > Partition 1 does not start on physical sector > boundary. > /dev/sdb2 2434 243201 1933968960 > 83 Linux > Partition 2 does not start on physical sector > boundary.
Re: Bricked GoFlex Home? :( June 06, 2013 05:56AM |
Registered: 11 years ago Posts: 19 |
root@debian-kirkwood-wide:~# fdisk -l Disk /dev/mtdblock0: 1 MB, 1048576 bytes 255 heads, 63 sectors/track, 0 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mtdblock0 doesn't contain a valid partition table Disk /dev/mtdblock1: 4 MB, 4194304 bytes 255 heads, 63 sectors/track, 0 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xee020f10 Disk /dev/mtdblock1 doesn't contain a valid partition table Disk /dev/mtdblock2: 33 MB, 33554432 bytes 255 heads, 63 sectors/track, 4 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xffffffff Disk /dev/mtdblock2 doesn't contain a valid partition table Disk /dev/mtdblock3: 229 MB, 229638144 bytes 255 heads, 63 sectors/track, 27 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xffffffff Disk /dev/mtdblock3 doesn't contain a valid partition table Disk /dev/sda: 4051 MB, 4051697664 bytes 255 heads, 63 sectors/track, 492 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c2c22 Device Boot Start End Blocks Id System /dev/sda1 * 294 460 1341427+ 83 Linux /dev/sda2 461 492 257040 82 Linux swap / Solaris Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xddd4e074 Device Boot Start End Blocks Id System /dev/sdb1 * 1 2612 20980856+ 83 Linux Partition 1 does not start on physical sector boundary. /dev/sdb2 2612 2744 1052260 82 Linux swap / Solaris /dev/sdb3 2744 243201 1931478884+ 83 Linux root@debian-kirkwood-wide:~#
Re: Bricked GoFlex Home? :( June 06, 2013 06:48PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked GoFlex Home? :( June 07, 2013 02:07AM |
Registered: 11 years ago Posts: 19 |
U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1 GNU ld (Sourcery G++ Lite 2009q3-67) 2.19.51.20090709 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Loading file "/rescueme" from usb device 0:1 (usbda1) ** File not found /rescueme reading /rescueme.txt ** Unable to read "/rescueme.txt" from usb 0:1 ** Creating 1 MTD partitions on "nand0": 0x000002500000-0x000010000000 : "mtd=3" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI error: validate_ec_hdr: bad VID header offset 2048, expected 512 UBI error: validate_ec_hdr: bad EC header UBI error: ubi_io_read_ec_hdr: validation failed for PEB 0 UBI error: ubi_init: cannot attach mtd1 UBI error: ubi_init: UBI error: cannot initialize UBI, error -22 UBI init error 22 Loading file "/boot/uImage" from usb device 0:1 (usbda1) 1 bytes read Found bootable drive on usb 0:1 Loading file "/boot/uImage" from usb device 0:1 (usbda1) EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 ** ext2fs_devread read error - block ** Unable to read "/boot/uImage" from usb 0:1 ** EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 Device NOT ready Request Sense returned 00 00 00 ** Can't read partition table on 0:0 ** ** Bad partition 1 ** ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-3.3.2 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2279192 Bytes = 2.2 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... Bad Data CRC ERROR: can't get kernel image! stopping USB.. ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000 Scanning JFFS2 FS: done. find_inode failed for name=uboot-original-mtd0.kwb load: Failed to find inode ### JFFS2 LOAD ERROR<0> for uboot-original-mtd0.kwb! ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000 Scanning JFFS2 FS: done. find_inode failed for name=uboot-original-mtd0.kwb load: Failed to find inode ### JFFS2 LOAD ERROR<0> for uboot-original-mtd0.kwb! resetting ... U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1 GNU ld (Sourcery G++ Lite 2009q3-67) 2.19.51.20090709 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Loading file "/rescueme" from usb device 0:1 (usbda1) ** File not found /rescueme reading /rescueme.txt ** Unable to read "/rescueme.txt" from usb 0:1 ** Creating 1 MTD partitions on "nand0": 0x000002500000-0x000010000000 : "mtd=3" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI error: validate_ec_hdr: bad VID header offset 2048, expected 512 UBI error: validate_ec_hdr: bad EC header UBI error: ubi_io_read_ec_hdr: validation failed for PEB 0 UBI error: ubi_init: cannot attach mtd1 UBI error: ubi_init: UBI error: cannot initialize UBI, error -22 UBI init error 22 Loading file "/boot/uImage" from usb device 0:1 (usbda1) 1 bytes read Found bootable drive on usb 0:1 Loading file "/boot/uImage" from usb device 0:1 (usbda1) 2279256 bytes read Loading file "/boot/uInitrd" from usb device 0:1 (usbda1) 7004538 bytes read ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-3.3.2 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2279192 Bytes = 2.2 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-3.3.2-kirkwood-dg Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7004474 Bytes = 6.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Using machid 0xd0a from environment Starting kernel ...
Re: Bricked GoFlex Home? :( June 07, 2013 03:25AM |
Registered: 11 years ago Posts: 19 |
Re: Bricked GoFlex Home? :( June 07, 2013 03:55AM |
Admin Registered: 13 years ago Posts: 18,821 |
usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi usb_rootfstype=ext3 usb_init=run usb_scan ; setenv usb_root LABEL=rootfs sata_boot=ide reset; mw 0x800000 0 1; ext2load ide 0:1 0x800000 /boot/uImage; if ext2load ide 0:1 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi sata_bootcmd=run usb_set_bootargs; run sata_boot bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run sata_bootcmd; run rescue_bootcmd; run pogo_bootcmd; reset
Re: Bricked GoFlex Home? :( June 07, 2013 04:12AM |
Registered: 11 years ago Posts: 19 |
Re: Bricked GoFlex Home? :( June 07, 2013 12:54PM |
Admin Registered: 13 years ago Posts: 18,821 |
fw_setenv usb_rootfstype ext2 fw_setenv usb_init 'run usb_scan ; setenv usb_root LABEL=rootfs'
tune2fs -L rootfs /dev/sda1
/dev/disk/by-label/rootfs on / type ext2 (rw,noatime,errors=remount-ro)
Re: Bricked GoFlex Home? :( June 07, 2013 03:09PM |
Registered: 11 years ago Posts: 19 |
root@debian-kirkwood-wide:~# mount /dev/sdb1 on / type ext3 (rw,noatime,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) tmpfs on /tmp type tmpfs (rw)
root@debian-kirkwood-wide:~# mount /dev/sdb1 on / type ext3 (rw,noatime,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) tmpfs on /tmp type tmpfs (rw) /dev/sda1 on /media/SATAHDD type ext3 (rw)
Re: Bricked GoFlex Home? :( June 07, 2013 03:56PM |
Admin Registered: 13 years ago Posts: 18,821 |
udevadm info --query=all --name=/dev/sda1 | grep -i id_fs_type
Re: Bricked GoFlex Home? :( June 07, 2013 04:45PM |
Registered: 11 years ago Posts: 19 |
Re: Bricked GoFlex Home? :( June 07, 2013 06:35PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked GoFlex Home? :( June 07, 2013 06:51PM |
Registered: 11 years ago Posts: 19 |