Welcome! Log In Create A New Profile

Advanced

...kernel panic???

Posted by xenoxaos 
...kernel panic???
August 18, 2010 08:51PM
I'm getting a kernel panic on a known good flash drive and also another one that should work. Any ideas???


[ 33.550686] VFS: Cannot open root device "sda1" or unknown-block(0,0)
[ 33.557155] Please append a correct "root=" boot option; here are the available partitions:
[ 33.565571] 1f00 1024 mtdblock0 (driver?)
[ 33.570583] 1f01 4096 mtdblock1 (driver?)
[ 33.575584] 1f02 519168 mtdblock2 (driver?)
[ 33.580591] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 33.588927] [<c002dee4>] (unwind_backtrace+0x0/0xdc) from [<c02b5c68>] (panic+0x34/0x128)
[ 33.597170] [<c02b5c68>] (panic+0x34/0x128) from [<c0008fb0>] (mount_block_root+0x25c/0x2b4)
[ 33.605666] [<c0008fb0>] (mount_block_root+0x25c/0x2b4) from [<c00091a0>] (prepare_namespace+0x12c/0x198)
[ 33.615292] [<c00091a0>] (prepare_namespace+0x12c/0x198) from [<c00085e0>] (kernel_init+0xf0/0x12c)
[ 33.624396] [<c00085e0>] (kernel_init+0xf0/0x12c) from [<c0028e7c>] (kernel_thread_exit+0x0/0x8)
Re: ...kernel panic???
August 18, 2010 10:31PM
I've seen that error when uBoot doesn't read the uInitrd image. It can happen if you run the mtd installer again after running the debian installer. You can fix it by running the following from uBoot:

setenv bootcmd_usb 'run set_bootargs_usb; run usb_init; ext2load usb $usb_device 0x800000 /boot/uImage; ext2load usb $usb_device 0x1100000 /boot/uInitrd; bootm 0x800000 0x1100000'
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: