Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 03, 2023 05:19PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 04, 2023 11:49AM |
Registered: 1 year ago Posts: 50 |
WARN[2023-06-04T21:00:28.853945313+02:00] Running modprobe bridge br_netfilter failed with message: modprobe: WARNING: Module bridge not found in directory /lib/modules/6.3.5-mvebu-tld-1is there anyway to install it?
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 04, 2023 02:06PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 04, 2023 02:13PM |
Registered: 1 year ago Posts: 50 |
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 04, 2023 03:50PM |
Registered: 1 year ago Posts: 50 |
ln -s /lib/modules/6.3.5-mvebu-tld-1/kernel/net/bridge /lib/modules/6.3.5-mvebu-tld-1/kernel/net/bridge ln: failed to create symbolic link '/lib/modules/6.3.5-mvebu-tld-1/kernel/net/bridge': No such file or directoryMy system is "somehow" missing the br_netfilter. But I found it inside.
root@debian:~# depmod depmod: ERROR: could not open directory /lib/modules/6.3.5-mvebu-tld-1: No such file or directory depmod: FATAL: could not search modules: No such file or directory
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 04, 2023 04:12PM |
Admin Registered: 13 years ago Posts: 19,102 |
depmod: ERROR: could not open directory /lib/modules/6.3.5-mvebu-tld-1: No such file or directoryThe error above error indicated that you have not installed the kernel 6.3.5-mvebu-tld-1 in the rootfs.
uname -a ls -lart /lib/modules ls -lart /boot mount lsblk df -h
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 04, 2023 04:17PM |
Registered: 1 year ago Posts: 50 |
> uname -a Linux debian 6.3.5-mvebu-tld-1 #1 SMP PREEMPT Thu Jun 1 02:35:15 PDT 2023 armv7l GNU/Linux > ls -lart /lib/modules total 16 drwxr-xr-x 3 root root 4096 Sep 24 2021 5.13.8-mvebu-tld-1 drwxr-xr-x 2 root root 4096 Sep 24 2021 5.2.9-mvebu-tld-1 lrwxrwxrwx 1 root docker 18 Jun 4 22:19 6.3.5-mvebu-tld-1 -> /path/to/module.ko drwxr-xr-x 4 root root 4096 Jun 4 22:19 . drwxr-xr-x 14 root root 4096 Jun 4 22:28 .. > ls -lart /boot total 116032 drwxrwxrwx 21 root root 4096 Jan 20 2017 .. -rwxr-xr-x 1 root root 5218232 Aug 7 2021 vmlinuz-5.13.8-mvebu-tld-1 -rw-r--r-- 1 root root 205052 Aug 7 2021 config-5.13.8-mvebu-tld-1 -rw-r--r-- 1 root root 4461631 Aug 7 2021 System.map-5.13.8-mvebu-tld-1 -rwxr-xr-x 1 root root 5218232 Aug 8 2021 zImage-5.13.8-mvebu-tld-1 -rw-r--r-- 1 root root 7785524 Aug 8 2021 linux-headers-5.13.8-mvebu-tld-1_1.0_armhf.deb drwxr-xr-x 2 root root 4096 May 2 04:04 dts -rw-r--r-- 1 root root 219839 Jun 1 08:10 config-6.3.5-mvebu-tld-1 -rwxr-xr-x 1 root root 5074352 Jun 1 11:37 zImage-6.3.5-mvebu-tld-1 -rw-r--r-- 1 root root 23345024 Jun 1 11:58 linux-image-6.3.5-mvebu-tld-1_1_armhf.deb -rw-r--r-- 1 root root 8443956 Jun 1 11:58 linux-headers-6.3.5-mvebu-tld-1_1_armhf.deb -rw-r--r-- 1 root root 1269760 Jun 1 20:46 linux-dtb-6.3.5-mvebu-tld-1.tar -rw-r--r-- 1 root root 98461 Jun 2 07:32 linux-6.3.5-mvebu-tld-1.patch -rw-r--r-- 1 root root 37183909 Jun 4 07:46 linux-6.3.5-mvebu-tld-1-bodhi.tar.bz2 -rwxr-xr-x 1 root root 5093940 Jun 4 07:58 zImage.fdt -rw-r--r-- 1 root root 5094004 Jun 4 07:58 uImage -rw-r--r-- 1 root root 0 Jun 4 07:58 uInitrd -rw-r--r-- 1 root root 10065543 Jun 4 08:41 initrd.img-5.13.8-mvebu-tld-1 drwxr-xr-x 3 root root 4096 Jun 4 08:41 . > mount sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) udev on /dev type devtmpfs (rw,nosuid,relatime,size=504884k,nr_inodes=126221,mode=755) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,nodev,noexec,relatime,size=102068k,mode=755) /dev/sda1 on / type ext4 (rw,noatime,errors=remount-ro) securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot) bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700) systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct) sunrpc on /run/rpc_pipefs type rpc_pipefs (rw,relatime) debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime) mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime) nfsd on /proc/fs/nfsd type nfsd (rw,relatime) tmpfs on /tmp type tmpfs (rw,relatime) tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=102064k,nr_inodes=25516,mode=700) > lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 1 3.6T 0 disk |-sda1 8:1 1 20G 0 part / |-sda2 8:2 1 1.1G 0 part | `-md1 9:1 0 1.1G 0 raid1 `-sda3 8:3 1 3.6T 0 part `-md2 9:2 0 3.6T 0 raid1 sdb 8:16 1 3.6T 0 disk |-sdb1 8:17 1 20G 0 part |-sdb2 8:18 1 1.1G 0 part | `-md1 9:1 0 1.1G 0 raid1 `-sdb3 8:19 1 3.6T 0 part `-md2 9:2 0 3.6T 0 raid1 sdc 8:32 1 1.9G 0 disk `-sdc1 8:33 1 1.9G 0 part mtdblock0 31:0 0 5M 0 disk mtdblock1 31:1 0 5M 0 disk mtdblock2 31:2 0 5M 0 disk mtdblock3 31:3 0 185M 0 disk mtdblock4 31:4 0 15M 0 disk mtdblock5 31:5 0 20M 0 disk mtdblock6 31:6 0 10M 0 disk mtdblock7 31:7 0 10M 0 disk > df -h Filesystem Size Used Avail Use% Mounted on udev 494M 0 494M 0% /dev tmpfs 100M 1.6M 99M 2% /run /dev/sda1 20G 2.0G 17G 11% / tmpfs 499M 0 499M 0% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 499M 0 499M 0% /tmp tmpfs 100M 0 100M 0% /run/user/0 >
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 04, 2023 04:32PM |
Admin Registered: 13 years ago Posts: 19,102 |
Quote
did I do something wrong?
> ls -lart /boot ...... -rw-r--r-- 1 root root 10065543 Jun 4 08:41 initrd.img-5.13.8-mvebu-tld-1
> ls -lart /lib/modules lrwxrwxrwx 1 root docker 18 Jun 4 22:19 6.3.5-mvebu-tld-1 -> /path/to/module.ko
Quote
https://forum.doozan.com/read.php?2,32146
3. And install it with dpkg. Remove flash-kernel first to avoid potential problem (if flash-kernel was not installed then you'll see some error output):
cd /boot
apt-get remove flash-kernel
dpkg -i linux-image-6.3.5-mvebu-tld-1_1_armhf.deb
4. Create uImage and uInitrd (kernel file initrd.img-6.3.5-mvebu-tld-1 was generated by dpkg in step 3). I am using the Zyxel NAS326 as an example here. Please replace armada-380-zyxel-nas326.dtb below with the appropriate DTB name for your box.
cd /boot
cp -a zImage-6.3.5-mvebu-tld-1 zImage.fdt
cat dts/armada-380-zyxel-nas326.dtb >> zImage.fdt
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-6.3.5-mvebu-tld-1 -d zImage.fdt uImage
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-6.3.5-mvebu-tld-1 -d initrd.img-6.3.5-mvebu-tld-1 uInitrd
dpkg -i linux-headers-6.3.5-mvebu-tld-1_1_armhf.deb
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 04, 2023 05:02PM |
Registered: 1 year ago Posts: 50 |
docker: Error response from daemon: failed to create task for container: failed to create shi m task: OCI runtime create failed: runc create failed: unable to start container process: err or during container init: error setting cgroup config for procHooks process: bpf_prog_query(B PF_CGROUP_DEVICE) failed
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 04, 2023 05:15PM |
Admin Registered: 13 years ago Posts: 19,102 |
Quote
> docker: Error response from daemon: failed to
> create task for container: failed to create shi m
> task: OCI runtime create failed: runc create
> failed: unable to start container process: err or
> during container init: error setting cgroup config
> for procHooks process: bpf_prog_query(B
> PF_CGROUP_DEVICE) failed
gennnarino
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 05, 2023 04:41AM |
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 05, 2023 02:40PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 05, 2023 11:09PM |
Registered: 1 year ago Posts: 50 |
U-Boot 2013.01_v1.04 (Apr 19 2020 - 23:10:38) Marvell version: 2014_T3.0p6 mvBoardIdIndexGet(boardId) = 1 Board: GrandTeton DB6820 SoC: MV88F6820 Rev A0 running 2 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 1332 [MHz] L2 @ 666 [MHz] TClock @ 200 [MHz] DDR @ 666 [MHz] DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled DRAM: 1 GiB Map: Code: 0x3fece000:0x3ff96000 BSS: 0x3ffef654 Stack: 0x3f9cdf20 Heap: 0x3f9ce000:0x3fece000 raise: Signal # 8 caught raise: Signal # 8 caught U-Boot Environment: 0x00000000:0x00080000 (NAND) NAND: ID: dac2 ,256 MiB MMC: mv_sdh: 0 PCI-e 0: Detected No Link. USB2.0 0: Host Mode USB3.0 0: Host Mode USB3.0 1: Host Mode Board configuration detected: Creating 1 MTD partitions on "nand0": 0x00000f500000-0x00000ff00000 : "mtd=7" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=7" UBI: MTD device size: 10 MiB UBI: number of good PEBs: 80 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 32 UBI: total number of reserved PEBs: 48 UBI: number of PEBs reserved for bad PEB handling: 2 UBI: max/mean erase counter: 3/0 UBIFS: mounted UBI device 0, volume 0, name "reserve2" UBIFS: mounted read-only UBIFS: file system size: 4063232 bytes (3968 KiB, 3 MiB, 32 LEBs) UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: LZO UBIFS: reserved for root: 200807 bytes (196 KiB) Loading file '/mac_addr' to addr 0x02000000 with size 18 (0x00000012)... Done Set lan 2 WakeOnLan ok Enable HD1 Enable HD2 Net: | port | Interface | PHY address | |--------|-----------|--------------| | egiga0 | RGMII | In-Band | | egiga1 | RGMII | In-Band | | egiga2 | SGMII | 0x00 | egiga0, egiga1, egiga2 [PRIME] Hit any key to stop autoboot: 0 Marvell>> 111111111111111111111111111111<INTERRUPT> Marvell>> printenv bootargs bootargs=root=/dev/ram console=ttyS0,115200 Marvell>> print env bootargs_debian ## Error: "env" not defined ## Error: "bootargs_debian" not defined Marvell>> printenv bootargs_debian ## Error: "bootargs_debian" not defined Marvell>> printenv set_bootargs_debian set_bootargs_debian=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs mtdpa @10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m ial Marvell>> setenv set_bootargs_debian "setenv bootargs console=ttyS0,115200 root= ),5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215 2) earlyprintk=serial systemd.unified_cgroup_hierarchy=0" Marvell>> boot (Re)start USB... USB0: Port (usbActive) : 0 Interface (usbType = 3) : USB XHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found 5094004 bytes read in 488 ms (10 MiB/s) 10099340 bytes read in 626 ms (15.4 MiB/s) ## Booting image at 00800000 ... ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-6.3.5-mvebu-tld-1 Created: 2023-06-03 21:27:26 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5093940 Bytes = 4.9 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02100000 ... Image Name: initramfs-6.3.5-mvebu-tld-1 Created: 2023-06-03 21:27:41 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 10099276 Bytes = 9.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 6.3.5-mvebu-tld-1 (root@tldDebian) (gcc (De for Debian) 2.40) #1 SMP PREEMPT Thu Jun 1 02:35:15 PDT 2023 [ 0.000000][ T0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10 [ 0.000000][ T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing in [ 0.000000][ T0] OF: fdt: Machine model: WD MyCloud Ex2 Ultra [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writealloc [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000][ T0] HighMem [mem 0x0000000030000000-0x000000003fffffff] [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000003f [ 0.000000][ T0] percpu: Embedded 14 pages/cpu s25300 r8192 d23852 u57344 [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 26 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=root rnel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config), intk=serial systemd.unified_cgroup_hierarchy=0 [ 0.000000][ T0] Dentry cache hash table entries: 131072 (order: 7, 524288 [ 0.000000][ T0] Inode-cache hash table entries: 65536 (order: 6, 262144 b [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 1009768K/1048576K available (10240K kernel code, ss, 38808K reserved, 0K cma-reserved, 262144K highmem) [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_id [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay i [ 0.000000][ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_id [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] L2C: DT/platform modifies aux control register: 0x0607000 [ 0.000000][ T0] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000][ T0] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000][ T0] L2C-310 D prefetch enabled, offset 1 lines [ 0.000000][ T0] L2C-310 dynamic clock gating enabled, standby mode enable [ 0.000000][ T0] L2C-310 Coherent cache controller enabled, 16 ways, 1024 [ 0.000000][ T0] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x5607000 [ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on conten [ 0.000001][ T0] sched_clock: 64 bits at 666MHz, resolution 1ns, wraps eve [ 0.008682][ T0] clocksource: arm_global_timer: mask: 0xffffffffffffffff m 25152 ns [ 0.020390][ T0] Switching to timer-based delay loop, resolution 1ns [ 0.027211][ T0] Ignoring duplicate/late registration of read_current_time [ 0.034929][ T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff 870 ns [ 0.046788][ T0] kfence: initialized - using 2097152 bytes for 255 objects [ 0.056712][ T0] Console: colour dummy device 80x30 [ 0.061865][ T0] Calibrating delay loop (skipped), value calculated using 00) [ 0.073138][ T0] pid_max: default: 32768 minimum: 301 [ 0.078687][ T0] LSM: initializing lsm=capability,integrity [ 0.084645][ T0] Mount-cache hash table entries: 2048 (order: 1, 8192 byte [ 0.092633][ T0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 [ 0.101910][ T0] CPU: Testing write buffer coherency: ok [ 0.107494][ T0] CPU0: Spectre v2: using BPIALL workaround [ 0.113420][ T1] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.120474][ T1] cblist_init_generic: Setting adjustable number of callbac [ 0.128390][ T1] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.135234][ T1] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.142100][ T1] Setting up static identity map for 0x100000 - 0x100060 [ 0.149078][ T1] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4 [ 0.155002][ T1] mvebu-pmsu: Initializing Power Management Service Unit [ 0.162002][ T1] rcu: Hierarchical SRCU implementation. [ 0.167485][ T1] rcu: Max phase no-delay instances is 1000. [ 0.174066][ T1] smp: Bringing up secondary CPUs ... [ 0.179812][ T1] Booting CPU 1 [ 0.183276][ T0] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.183287][ T0] CPU1: Spectre v2: using BPIALL workaround [ 0.195429][ T1] smp: Brought up 1 node, 2 CPUs [ 0.200232][ T1] SMP: Total of 2 processors activated (2664.00 BogoMIPS). [ 0.207265][ T1] CPU: All CPU(s) started in SVC mode. [ 0.212994][ T1] devtmpfs: initialized [ 0.220860][ T1] VFP support v0.3: implementor 41 architecture 3 part 30 v [ 0.229485][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffff [ 0.240006][ T1] futex hash table entries: 512 (order: 3, 32768 bytes, lin [ 0.247677][ T1] prandom: seed boundary self test passed [ 0.254822][ T1] prandom: 100 self tests passed [ 0.259606][ T1] pinctrl core: initialized pinctrl subsystem [ 0.266529][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.273899][ T1] DMA: preallocated 256 KiB pool for atomic coherent alloca [ 0.282185][ T1] audit: initializing netlink subsys (disabled) [ 0.288432][ T24] audit: type=2000 audit(0.250:1): state=initialized audit_ [ 0.288836][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.296999][ T1] cpuidle: using governor ladder [ 0.308488][ T1] cpuidle: using governor menu [ 0.313282][ T1] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 wat [ 0.321962][ T1] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.328621][ T1] mvebu-pmsu: CPU hotplug support is currently broken on Ar [ 0.337402][ T1] mvebu-pmsu: CPU idle is currently broken on Armada 38x: d [ 0.347424][ T1] platform soc: Fixed dependency cycle(s) with /soc/interna [ 0.527105][ T1] raid6: int32x8 gen() 266 MB/s [ 0.697146][ T1] raid6: int32x4 gen() 277 MB/s [ 0.867099][ T1] raid6: int32x2 gen() 459 MB/s [ 1.037109][ T1] raid6: int32x1 gen() 528 MB/s [ 1.042055][ T1] raid6: using algorithm int32x1 gen() 528 MB/s [ 1.217126][ T1] raid6: .... xor() 223 MB/s, rmw enabled [ 1.222680][ T1] raid6: using intx1 recovery algorithm [ 1.228932][ T1] SCSI subsystem initialized [ 1.233650][ T1] usbcore: registered new interface driver usbfs [ 1.239867][ T1] usbcore: registered new interface driver hub [ 1.245891][ T1] usbcore: registered new device driver usb [ 1.251884][ T1] pps_core: LinuxPPS API ver. 1 registered [ 1.257539][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodol [ 1.267348][ T1] PTP clock support registered [ 1.273233][ T1] vgaarb: loaded [ 1.277104][ T1] clocksource: Switched to clocksource arm_global_timer [ 1.284283][ T1] VFS: Disk quotas dquot_6.6.0 [ 1.288965][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 [ 1.303652][ T1] NET: Registered PF_INET protocol family [ 1.309407][ T1] IP idents hash table entries: 16384 (order: 5, 131072 byt [ 1.318886][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: [ 1.328041][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 [ 1.336464][ T1] TCP established hash table entries: 8192 (order: 3, 32768 [ 1.344966][ T1] TCP bind hash table entries: 8192 (order: 5, 131072 bytes [ 1.353007][ T1] TCP: Hash tables configured (established 8192 bind 8192) [ 1.360220][ T1] MPTCP token hash table entries: 1024 (order: 2, 16384 byt [ 1.368357][ T1] UDP hash table entries: 512 (order: 2, 16384 bytes, linea [ 1.375662][ T1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, [ 1.383530][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.390343][ T1] RPC: Registered named UNIX socket transport module. [ 1.396938][ T1] RPC: Registered udp transport module. [ 1.402355][ T1] RPC: Registered tcp transport module. [ 1.407744][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.414860][ T1] PCI: CLS 0 bytes, default 64 [ 1.419631][ T1] NetWinder Floating Point Emulator V0.97 (double precision [ 1.419674][ T10] Trying to unpack rootfs image as initramfs... [ 1.433060][ T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 [ 1.443001][ T1] Initialise system trusted keyrings [ 1.448962][ T1] Key type blacklist registered [ 1.457274][ T1] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.464587][ T1] zbud: loaded [ 1.469226][ T1] NFS: Registering the id_resolver key type [ 1.474982][ T1] Key type id_resolver registered [ 1.479908][ T1] Key type id_legacy registered [ 1.484714][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering [ 1.492145][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Reg [ 1.557044][ T1] xor: measuring software checksum speed [ 1.567151][ T1] arm4regs : 2171 MB/sec [ 1.578162][ T1] 8regs : 1667 MB/sec [ 1.588909][ T1] 32regs : 1732 MB/sec [ 1.593949][ T1] xor: using function: arm4regs (2171 MB/sec) [ 1.599871][ T1] async_tx: api initialized (async) [ 1.604918][ T1] Key type asymmetric registered [ 1.609713][ T1] Asymmetric key parser 'x509' registered [ 1.615460][ T1] bounce: pool size: 64 pages [ 1.620269][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded [ 1.628497][ T1] io scheduler bfq registered [ 1.636173][ T1] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl d [ 1.645685][ T1] gpio gpiochip0: Static allocation of GPIO base is depreca [ 1.655863][ T1] debugfs: Directory 'f1018100.gpio' with parent 'regmap' a [ 1.665111][ T1] gpio gpiochip1: Static allocation of GPIO base is depreca [ 1.675307][ T1] debugfs: Directory 'f1018140.gpio' with parent 'regmap' a [ 1.685711][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.757926][ T1] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor [ 1.768689][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.845115][ T10] Freeing initrd memory: 9864K [ 1.847883][ T1] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor [ 1.941373][ T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.950844][ T1] printk: console [ttyS0] disabled [ 1.976072][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 39, base [ 1.985756][ T1] printk: console [ttyS0] enabled [ 1.985756][ T1] printk: console [ttyS0] enabled [ 1.995583][ T1] printk: bootconsole [earlycon0] disabled [ 1.995583][ T1] printk: bootconsole [earlycon0] disabled [ 2.048111][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 40, base [ 2.059175][ T1] ahci-mvebu f10a8000.sata: supply ahci not found, using du [ 2.067674][ T1] ahci-mvebu f10a8000.sata: supply phy not found, using dum [ 2.075943][ T1] ahci-mvebu f10a8000.sata: supply target not found, using [ 2.084592][ T1] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports [ 2.094413][ T1] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only [ 2.105163][ T1] scsi host0: ahci-mvebu [ 2.109914][ T1] scsi host1: ahci-mvebu [ 2.114237][ T1] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] [ 2.122930][ T1] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] [ 2.133208][ T1] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda [ 2.140325][ T1] nand: Macronix MX30LF2G18AC [ 2.144883][ T1] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, [ 2.153497][ T1] Bad block table found at page 131008, version 0x01 [ 2.160394][ T1] Bad block table found at page 130944, version 0x01 [ 2.167183][ T1] 8 cmdlinepart partitions found on MTD device pxa3xx_nand- [ 2.174448][ T1] Creating 8 MTD partitions on "pxa3xx_nand-0": [ 2.180590][ T1] 0x000000000000-0x000000500000 : "u-boot" [ 2.187739][ T1] 0x000000500000-0x000000a00000 : "kernel" [ 2.194695][ T1] 0x000000a00000-0x000000f00000 : "uRamdisk" [ 2.201852][ T1] 0x000000f00000-0x00000c800000 : "image.cfs" [ 2.209499][ T1] 0x00000c800000-0x00000d700000 : "rescue_fw" [ 2.216895][ T1] 0x00000d700000-0x00000eb00000 : "config" [ 2.223948][ T1] 0x00000eb00000-0x00000f500000 : "reserve1" [ 2.231244][ T1] 0x00000f500000-0x00000ff00000 : "reserve2" [ 2.239477][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com [ 2.248079][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Ja [ 2.274378][ T1] hwmon hwmon0: temp1_input not attached to any thermal zon [ 2.283479][ T1] mvneta_bm f10c8000.bm: Buffer Manager for network control [ 2.296908][ T1] mvneta f1034000.ethernet eth0: Using random mac address 2 [ 2.306213][ T1] usbcore: registered new interface driver smsc75xx [ 2.313059][ T1] orion-ehci f1058000.usb: EHCI Host Controller [ 2.319229][ T1] orion-ehci f1058000.usb: new USB bus registered, assigned [ 2.327633][ T1] orion-ehci f1058000.usb: irq 44, io mem 0xf1058000 [ 2.367116][ T1] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 [ 2.374029][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct= [ 2.383073][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, Seria [ 2.391072][ T1] usb usb1: Product: EHCI Host Controller [ 2.396692][ T1] usb usb1: Manufacturer: Linux 6.3.5-mvebu-tld-1 ehci_hcd [ 2.403802][ T1] usb usb1: SerialNumber: f1058000.usb [ 2.409808][ T1] hub 1-0:1.0: USB hub found [ 2.414326][ T1] hub 1-0:1.0: 1 port detected [ 2.420760][ T1] usbcore: registered new interface driver usblp [ 2.427132][ T1] usbcore: registered new interface driver usb-storage [ 2.434326][ T1] mousedev: PS/2 mouse device common for all mice [ 2.442443][ T1] armada38x-rtc f10a3800.rtc: registered as rtc0 [ 2.449716][ T1] armada38x-rtc f10a3800.rtc: setting system clock to 2023- [ 2.460113][ T1] i2c_dev: i2c /dev entries driver [ 2.465354][ T1] mv64xxx_i2c f1011000.i2c: can't get pinctrl, bus recovery [ 2.474201][ T1] mv64xxx_i2c f1011100.i2c: can't get pinctrl, bus recovery [ 2.485429][ T1] orion_wdt: Initial timeout 171 sec [ 2.491217][ T1] device-mapper: uevent: version 1.0.3 [ 2.496736][ T1] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialis [ 2.506192][ T1] device-mapper: multipath round-robin: version 1.2.0 loade [ 2.513478][ T1] device-mapper: multipath queue-length: version 0.2.0 load [ 2.520867][ T1] device-mapper: multipath service-time: version 0.3.0 load [ 2.528270][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 2.535097][ T1] device-mapper: raid: Loading target version 1.15.1 [ 2.541788][ T1] sdhci: Secure Digital Host Controller Interface driver [ 2.548713][ T1] sdhci: Copyright(c) Pierre Ossman [ 2.553901][ T1] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.562415][ T1] marvell-cesa f1090000.crypto: CESA device successfully re [ 2.570499][ T1] hid: raw HID events driver (C) Jiri Kosina [ 2.576606][ T1] usbcore: registered new interface driver usbhid [ 2.582932][ T1] usbhid: USB HID core driver [ 2.588192][ T1] NET: Registered PF_INET6 protocol family [ 2.594909][ T1] Segment Routing with IPv6 [ 2.599322][ T1] RPL Segment Routing with IPv6 [ 2.604100][ T1] In-situ OAM (IOAM) with IPv6 [ 2.608852][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.616646][ T1] NET: Registered PF_PACKET protocol family [ 2.622602][ T1] 8021q: 802.1Q VLAN Support v1.8 [ 2.627570][ T1] Key type dns_resolver registered [ 2.632729][ T1] ThumbEE CPU extension supported. [ 2.637126][ T664] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.644651][ T659] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.651594][ T1] Registering SWP/SWPB emulation handler [ 2.667310][ T664] ata2.00: ATA-10: WDC WD40EFAX-68JH4N1, 83.00A83, max UDMA [ 2.674857][ T664] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 3 [ 2.682280][ T1] registered taskstats version 1 [ 2.695695][ T659] ata1.00: ATA-10: WDC WD40EFAX-68JH4N1, 83.00A83, max UDMA [ 2.703304][ T659] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 3 [ 2.703709][ T1] Loading compiled-in X.509 certificates [ 2.711270][ T664] ata2.00: configured for UDMA/133 [ 2.716642][ T1] zswap: loaded using pool lzo/zbud [ 2.721310][ T659] ata1.00: configured for UDMA/133 [ 2.731516][ T1] Key type .fscrypt registered [ 2.736169][ T1] Key type fscrypt-provisioning registered [ 2.742364][ T10] scsi 0:0:0:0: Direct-Access ATA WDC WD40EFAX-68J [ 2.742874][ T1] Key type big_key registered [ 2.756404][ T8] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4. [ 2.756589][ T42] scsi 1:0:0:0: Direct-Access ATA WDC WD40EFAX-68J [ 2.765145][ T8] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.780344][ T8] sd 0:0:0:0: [sda] Write Protect is off [ 2.783057][ T41] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4. [ 2.794573][ T8] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabl [ 2.795010][ T41] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.804957][ T8] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 2.817426][ T41] sd 1:0:0:0: [sdb] Write Protect is off [ 2.823914][ T41] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabl [ 2.824068][ T1] Key type encrypted registered [ 2.833928][ T41] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.846459][ T10] usb_phy_generic usb3_0_phy: dummy supplies not allowed fo [ 2.856545][ T10] usb_phy_generic usb3_1_phy: dummy supplies not allowed fo [ 2.865836][ T10] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 2.872005][ T10] xhci-hcd f10f0000.usb3: new USB bus registered, assigned [ 2.880453][ T10] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version [ 2.890574][ T10] xhci-hcd f10f0000.usb3: irq 45, io mem 0xf10f0000 [ 2.895330][ T8] sda: sda1 sda2 sda3 [ 2.897265][ T10] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 2.903398][ T41] sdb: sdb1 sdb2 sdb3 [ 2.907139][ T10] xhci-hcd f10f0000.usb3: new USB bus registered, assigned [ 2.919323][ T10] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed [ 2.926621][ T10] usb usb2: New USB device found, idVendor=1d6b, idProduct= [ 2.926979][ T8] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 2.935866][ T10] usb usb2: New USB device strings: Mfr=3, Product=2, Seria [ 2.949929][ T10] usb usb2: Product: xHCI Host Controller [ 2.950094][ T41] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 2.955538][ T10] usb usb2: Manufacturer: Linux 6.3.5-mvebu-tld-1 xhci-hcd [ 2.968874][ T10] usb usb2: SerialNumber: f10f0000.usb3 [ 2.974751][ T10] hub 2-0:1.0: USB hub found [ 2.979270][ T10] hub 2-0:1.0: 1 port detected [ 2.984249][ T10] usb usb3: We don't know the algorithms for LPM for this h [ 2.993192][ T10] usb usb3: New USB device found, idVendor=1d6b, idProduct= [ 3.002220][ T10] usb usb3: New USB device strings: Mfr=3, Product=2, Seria [ 3.010253][ T10] usb usb3: Product: xHCI Host Controller [ 3.015860][ T10] usb usb3: Manufacturer: Linux 6.3.5-mvebu-tld-1 xhci-hcd [ 3.022962][ T10] usb usb3: SerialNumber: f10f0000.usb3 [ 3.028854][ T10] hub 3-0:1.0: USB hub found [ 3.033351][ T10] hub 3-0:1.0: 1 port detected [ 3.038589][ T10] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 3.044648][ T10] xhci-hcd f10f8000.usb3: new USB bus registered, assigned [ 3.052984][ T10] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version [ 3.063004][ T10] xhci-hcd f10f8000.usb3: irq 46, io mem 0xf10f8000 [ 3.069738][ T10] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 3.075790][ T10] xhci-hcd f10f8000.usb3: new USB bus registered, assigned [ 3.084050][ T10] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed [ 3.091270][ T10] usb usb4: New USB device found, idVendor=1d6b, idProduct= [ 3.100297][ T10] usb usb4: New USB device strings: Mfr=3, Product=2, Seria [ 3.108270][ T10] usb usb4: Product: xHCI Host Controller [ 3.113876][ T10] usb usb4: Manufacturer: Linux 6.3.5-mvebu-tld-1 xhci-hcd [ 3.121026][ T10] usb usb4: SerialNumber: f10f8000.usb3 [ 3.127016][ T10] hub 4-0:1.0: USB hub found [ 3.131556][ T10] hub 4-0:1.0: 1 port detected [ 3.136521][ T10] usb usb5: We don't know the algorithms for LPM for this h [ 3.145516][ T10] usb usb5: New USB device found, idVendor=1d6b, idProduct= [ 3.154637][ T10] usb usb5: New USB device strings: Mfr=3, Product=2, Seria [ 3.162692][ T10] usb usb5: Product: xHCI Host Controller [ 3.168396][ T10] usb usb5: Manufacturer: Linux 6.3.5-mvebu-tld-1 xhci-hcd [ 3.175486][ T10] usb usb5: SerialNumber: f10f8000.usb3 [ 3.181357][ T10] hub 5-0:1.0: USB hub found [ 3.185853][ T10] hub 5-0:1.0: 1 port detected [ 3.191665][ T1] input: gpio-keys as /devices/platform/gpio-keys/input/inp [ 3.202620][ T1] Freeing unused kernel image (initmem) memory: 1024K [ 3.237831][ T1] Checked W+X mappings: passed, no W+X pages found [ 3.244345][ T1] Run /init as init process [ 3.267150][ T34] usb 2-1: new high-speed USB device number 2 using xhci-hc Loading, please wait... Starting version 247.3-6 [ 3.448804][ T34] usb 2-1: New USB device found, idVendor=090c, idProduct=1 [ 3.458196][ T34] usb 2-1: New USB device strings: Mfr=1, Product=2, Serial [ 3.466083][ T34] usb 2-1: Product: USB Flash Disk [ 3.471178][ T34] usb 2-1: Manufacturer: General [ 3.476001][ T34] usb 2-1: SerialNumber: FBK1510272200005 [ 3.482581][ T34] usb-storage 2-1:1.0: USB Mass Storage device detected [ 3.497420][ T34] scsi host2: usb-storage 2-1:1.0 [ 3.622119][ T1289] usbcore: registered new interface driver uas [ 3.876683][ T1290] mtdblock: MTD device 'u-boot' is NAND, please consider us [ 3.893266][ T1294] mtdblock: MTD device 'kernel' is NAND, please consider us [ 3.908937][ T1293] mtdblock: MTD device 'uRamdisk' is NAND, please consider [ 3.917866][ T1290] mtdblock: MTD device 'config' is NAND, please consider us [ 3.922095][ T1291] mtdblock: MTD device 'rescue_fw' is NAND, please consider [ 3.939324][ T1288] mtdblock: MTD device 'image.cfs' is NAND, please consider [ 3.944448][ T1294] mtdblock: MTD device 'reserve2' is NAND, please consider [ 3.962640][ T1288] mtdblock: MTD device 'reserve1' is NAND, please consider Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.36.1 fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/sda fsck exited with status code 8 done. Warning: File system check failed but did not detect errors [ 4.707730][ T42] scsi 2:0:0:0: Direct-Access General USB Flash Disk [ 4.718318][ T10] sd 2:0:0:0: [sdc] 3932160 512-byte logical blocks: (2.01 [ 4.727729][ T10] sd 2:0:0:0: [sdc] Write Protect is off [ 4.733820][ T10] sd 2:0:0:0: [sdc] No Caching mode page found [ 4.739887][ T10] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 4.749969][ T10] sdc: sdc1 [ 4.753895][ T10] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 9.433791][ T1318] EXT4-fs (sda1): INFO: recovery required on readonly files [ 9.441450][ T1318] EXT4-fs (sda1): write access will be enabled during recov [ 9.821016][ T1318] EXT4-fs (sda1): recovery complete [ 9.840826][ T1318] EXT4-fs (sda1): mounted filesystem 0cd33a27-d423-4e01-9fd mode: none. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 10.796013][ T1] systemd[1]: systemd 247.3-7+deb11u2 running in system mod K +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +B t-hierarchy=unified) [ 10.824642][ T1] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 11.017532][ T1] systemd[1]: Set hostname to <debian>. [ 11.409109][ T1341] block sda: the capability attribute has been deprecated. [ 12.367119][ C1] random: crng init done [ 12.931706][ T1] systemd[1]: Queued start job for default target Graphical [ 12.940943][ T1] systemd[1]: system-getty.slice: unit configures an IP fir BPF/cgroup firewalling. [ 12.954091][ T1] systemd[1]: (This warning is only shown for the first uni [ 13.042959][ T1] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 13.079374][ T1] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 13.119252][ T1] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 13.159035][ T1] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 13.197470][ T1] systemd[1]: Started Dispatch Password Requests to Console [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 13.237426][ T1] systemd[1]: Started Forward Password Requests to Wall Dir [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 13.277813][ T1] systemd[1]: Set up automount Arbitrary Executable File Fo [ OK ] Set up automount Arbitrary…s File System Automount Point. [ 13.317346][ T1] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 13.357501][ T1] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 13.387319][ T1] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 13.417346][ T1] systemd[1]: Reached target System Time Set. [ OK ] Reached target System Time Set. [ 13.457576][ T1] systemd[1]: Listening on Device-mapper event daemon FIFOs [ OK ] Listening on Device-mapper event daemon FIFOs. [ 13.497625][ T1] systemd[1]: Listening on LVM2 poll daemon socket. [ OK ] Listening on LVM2 poll daemon socket. [ 13.537670][ T1] systemd[1]: Listening on RPCbind Server Activation Socket [ OK ] Listening on RPCbind Server Activation Socket. [ 13.577602][ T1] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 13.617542][ T1] systemd[1]: Listening on fsck to fsckd communication Sock [ OK ] Listening on fsck to fsckd communication Socket. [ 13.657440][ T1] systemd[1]: Listening on initctl Compatibility Named Pipe [ OK ] Listening on initctl Compatibility Named Pipe. [ 13.697704][ T1] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 13.737571][ T1] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 13.777632][ T1] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 13.817719][ T1] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 13.857655][ T1] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 13.897532][ T1] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 13.937650][ T1] systemd[1]: Condition check resulted in Huge Pages File S [ 13.997635][ T1] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 14.041806][ T1] systemd[1]: Mounting RPC Pipe File System... Mounting RPC Pipe File System... [ 14.081956][ T1] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 14.117633][ T1] systemd[1]: Condition check resulted in Kernel Trace File [ 14.127084][ T1] systemd[1]: Condition check resulted in Kernel Module sup [ 14.137804][ T1] systemd[1]: Finished Availability of block devices. [ OK ] Finished Availability of block devices. [ 14.217855][ T1] systemd[1]: Starting Create list of static device nodes f Starting Create list of st…odes for the current kernel... [ 14.262103][ T1] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshot Starting Monitoring of LVM…meventd or progress polling... [ 14.311528][ T1] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 14.361656][ T1] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 14.401817][ T1] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 14.465369][ T1359] fuse: init (API version 7.38) [ 14.470510][ T1] systemd[1]: Condition check resulted in Set Up Additional [ 14.517906][ T1] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 14.564400][ T1] systemd[1]: Starting Journal Service... Starting Journal Service... [ 14.624231][ T1] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 14.647911][ T1] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 14.669558][ T1] systemd[1]: Mounted POSIX Message Queue File System. [ OK 14.676827][ T1] systemd[1]: Mounted RPC Pipe File System. 0m] Mounted POSIX Message Queue File System. [ OK 14.697884][ T1] systemd[1]: Mounted Kernel Debug File System. 0m] Mounted RPC Pipe File System. [ 14.707980][ T1] systemd[1]: Finished Create list of static device nodes f [ OK ] Mounted Kernel Debug File System. [ OK ] Finished[ 14.725828][ T1] systemd[1]: Finished Monitoring of LVM2 gress polling. Create list of st… n[ 14.738934][ T1] systemd[1]: modprobe@configfs.servic odes for the current kernel. [ OK [ 14.750050][ T1] systemd[1]: Finished Load Kernel Module configfs. ] Finished Monitori[ 14.759650][ T1] systemd[1]: modprobe@drm.service: Succ ng of LVM… dmeventd or progres[ 14.767989][ T1] systemd[1]: Finished Load K s polling. [ OK 14.776618][ T1] systemd[1]: modprobe@fuse.service: Succeeded. 0m] Finished Load Kernel Module configf[ 14.787468][ T1] systemd[1]: Finish s. [ OK ] Finished Lo[ 14.797909][ T1] systemd[1]: Finished Load Kernel Modu ad Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Modules. [ 14.837790][ T1] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... [ 14.881923][ T1] systemd[1]: Mounting Kernel Configuration File System... Mounting Kernel Configuration File System... [ 14.921910][ T1] systemd[1]: Starting pNFS block layout mapping daemon... Starting pNFS block layout mapping daemon... [ 14.953641][ T1369] mtdblock: MTD device 'u-boot' is NAND, please consider us [ 14.968618][ T1] systemd[1]: Started File System Check Daemon to report st [ 14.971711][ T1369] mtdblock: MTD device 'kernel' is NAND, please consider us [ OK 14.987354][ T1369] mtdblock: MTD device 'uRamdisk' is NAND, please con 0m] Started 14.998165][ T1369] mtdblock: MTD device 'image.cfs' is NAND, plea 1;39mFile System[ 15.009601][ T1369] mtdblock: MTD device 'rescue_fw' is NAND, ead. Check Daemon to[ 15.021079][ T1369] mtdblock: MTD device 'config' is NAND, pl . report status 15.032349][ T1369] mtdblock: MTD device 'reserve1' is NAND, ple 0m. [ 15.043568][ T1369] mtdblock: MTD device 'reserve2' is NAND, please consider [ 15.117904][ T1] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 15.161068][ T1] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started pNFS block layout mapping daemon. [ OK ] Finished Apply Kernel Variables. Starting Remount Root and Kernel File Systems... [ 15.479594][ T1374] EXT4-fs (sda1): re-mounted 0cd33a27-d423-4e01-9fd9-1192c5 [ OK ] Finished Remount Root and Kernel File Systems. Starting Flush Journal to Persistent Storage... Starting Load/Save Random Seed... [ 15.612349][ T1362] systemd-journald[1362]: Received client request to flush Starting Create System Users... [ OK ] Finished Coldplug All udev Devices. [ 15.746923][ T1362] systemd-journald[1362]: File /var/log/journal/50b0e021e74 d or uncleanly shut down, renaming and replacing. Starting Helper to synchronize boot up for ifupdown... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Started Rule-based Manager for Device Events and Files. Starting Network Service... [ OK ] Found device /dev/ttyS0. [ OK ] Started Network Service. Starting Wait for Network to be Configured... [ 16.976223][ T1392] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 16.983892][ T1391] mtdblock: MTD device 'u-boot' is NAND, please consider us [ 16.993922][ T1392] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 16.997465][ T1386] mtdblock: MTD device 'kernel' is NAND, please consider us [ 17.009995][ T1392] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 17.033819][ T1385] mtdblock: MTD device 'uRamdisk' is NAND, please consider [ 17.044102][ T1388] mtdblock: MTD device 'image.cfs' is NAND, please consider [ 17.065901][ T1387] mtdblock: MTD device 'rescue_fw' is NAND, please consider [ 17.132237][ T1387] mtdblock: MTD device 'config' is NAND, please consider us [ 17.146225][ T1386] mtdblock: MTD device 'reserve1' is NAND, please consider [ 17.146292][ T1388] mtdblock: MTD device 'reserve2' is NAND, please consider [ 17.652444][ T1446] md/raid1:md2: active with 2 out of 2 mirrors [ 17.697455][ T1449] md/raid1:md1: active with 2 out of 2 mirrors [ 17.703566][ T1449] md1: detected capacity change from 0 to 2240512 [ OK ] Started Timer to wait for …ctivating degraded array md1.. [ OK 17.758914][ T1446] md2: detected capacity change from 0 to 7769583232 0m] Started Timer to wait for …ctivating degraded array md2.. [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Stopped Timer to wait for …ctivating degraded array md1.. [ OK ] Stopped Timer to wait for …ctivating degraded array md2.. [ OK ] Started MD array monitor. [ TIME ] Timed out waiting for device /dev/md0. [DEPEND] Dependency failed for /dev/md0. [DEPEND] Dependency failed for Swap. Mounting Mount /tmp as tmp…e access to the root device... [ OK ] Mounted Mount /tmp as tmpf…ite access to the root device. [ OK ] Reached target Local File Systems. Starting Raise network interfaces... Starting Preprocess NFS configuration... Starting Cleanup monit state file... Starting Cleanup PHP session files... Starting Create Volatile Files and Directories... [ OK ] Finished Preprocess NFS configuration. [ OK ] Finished Cleanup monit state file. [ OK ] Finished Cleanup PHP session files. [ OK ] Finished Create Volatile Files and Directories. [ OK ] Reached target NFS client services. Starting RPC bind portmap service... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started RPC bind portmap service. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. [ OK ] Reached target RPC Port Mapper. [ OK 104.391345][ T1515] mvneta f1034000.ethernet eth0: PHY [f1072004.mdio-m 0m] Finished 104.403322][ T1515] mvneta f1034000.ethernet eth0: configuring fo ;1;39mUpdate UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API. [ OK ] Listening on Docker Socket for the API. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Avahi mDNS/DNS-SD Stack... Starting LSB: Starts syslogd... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting LSB: Load kernel …d to enable cpufreq scaling... Starting LSB: service and resource monitoring daemon... Starting System Logging Service... Starting User Login Management... Starting WPA supplicant... [ OK ] Started LSB: Starts syslogd. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started System Logging Service. Starting LSB: Starts klogd... [ OK ] Started LSB: Starts klogd. [ OK ] Started User Login Management. [ OK ] Started LSB: service and resource monitoring daemon. [ OK ] Started WPA supplicant. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling. Starting LSB: set CPUFreq kernel parameters... [ OK ] Started LSB: set CPUFreq kernel parameters. [ 107.547533][ T25] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - [ 107.556139][ T25] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Finished Wait for Network to be Configured. [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. Starting The Apache HTTP Server... Starting chrony, an NTP client/server... Starting containerd container runtime... Starting MariaDB 10.5.19 database server... Starting A high performanc… and a reverse proxy server... Starting The OpenMediaVaul…t processes the RPC request... Starting Generate the prelogin message... Starting The PHP 7.4 FastCGI Process Manager... Starting /etc/rc.local Compatibility... Starting Samba SMB Daemon... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Web Services Dynamic Discovery host daemon. [ OK ] Finished Permit User Sessions. [ OK ] Started chrony, an NTP client/server. [ OK ] Reached target System Time Synchronized. [ OK ] Started Trigger anacron every hour. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily man-db regeneration. [ OK ] Started Clean PHP session files every 30 mins. [ OK ] Reached target Timers. [ OK ] Started Run anacron jobs. Starting LSB: start or stop rrdcached... [ OK ] Started The Apache HTTP Server. [ OK ] Started OpenBSD Secure Shell server. [ 144.685412] rc.local[1704]: Starting ssh (via systemctl): ssh.service. [ 144.818905] rc.local[1747]: Cannot read environment, using default [ 144.850491] rc.local[1747]: Cannot read default environment from file [ 144.990403] rc.local[1748]: <13>Jun 5 08:37:19 root[1748]: Cannot read u-boo [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started A high performance…er and a reverse proxy server. [ OK ] Started LSB: start or stop rrdcached. Starting Statistics collection and monitoring daemon... [ OK ] Started The OpenMediaVault…hat processes the RPC request. [ OK ] Started Statistics collection and monitoring daemon. Mounting Arbitrary Executable File Formats File System... [ OK ] Mounted Arbitrary Executable File Formats File System. [ OK ] Started The PHP 7.4 FastCGI Process Manager. [ OK ] Started containerd container runtime. Starting Docker Application Container Engine... [ OK ] Started Samba SMB Daemon. [ OK ] Started MariaDB 10.5.19 database server. [ 150.068817][ T1755] fbcon: Taking over console openmediavault 6.4.2-1 (Shaitan) debian ttyS0 Copyright (C) 2009-2023 by Volker Theile. All rights reserved. To manage the system visit the openmediavault workbench: docker0: 172.17.0.1 eth0: 192.168.1.210 eth0: 2003:ed:171d:961:c090:9aff:feb0:fdd6 eth0: fe80::c090:9aff:feb0:fdd6 By default the workbench administrator account has the username 'admin' and password 'openmediavault'. It is recommended that you change the password for this account within the workbench or using the 'omv-firstaid' CLI command. For more information regarding this appliance, please visit the web site: https://www.openmediavault.org debian login: [ 151.190458][ T1916] bridge: filtering via arp/ip/ip6tables is n ripts to load br_netfilter if you need this. [ 151.234660][ T1916] Bridge firewalling registered [ 151.666897][ T1964] Initializing XFRM netlink socket
systemd.unified_cgroup_hierarchy=0to the bootargs
[42644.664952][T28684] mtdblock: MTD device 'u-boot' is NAND, please consider using UBI block devices instead. [42644.687333][T28684] mtdblock: MTD device 'kernel' is NAND, please consider using UBI block devices instead. [42644.710548][T28684] mtdblock: MTD device 'uRamdisk' is NAND, please consider using UBI block devices instead. [42644.742099][T28684] mtdblock: MTD device 'image.cfs' is NAND, please consider using UBI block devices instead. [42644.848377][T28684] mtdblock: MTD device 'rescue_fw' is NAND, please consider using UBI block devices instead. [42644.889215][T28684] mtdblock: MTD device 'config' is NAND, please consider using UBI block devices instead. [42644.912891][T28684] mtdblock: MTD device 'reserve1' is NAND, please consider using UBI block devices instead. [42644.933011][T28684] mtdblock: MTD device 'reserve2' is NAND, please consider using UBI block devices instead.very often.
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 06, 2023 01:17AM |
Admin Registered: 13 years ago Posts: 19,102 |
raid=noautodetect
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 06, 2023 05:21AM |
Registered: 1 year ago Posts: 50 |
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 06, 2023 01:33PM |
Admin Registered: 13 years ago Posts: 19,102 |
Quote
setenv set_bootargs_debian "setenv bootargs console=ttyS0,115200 root=),5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215
2) earlyprintk=serial systemd.unified_cgroup_hierarchy=0"
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 06, 2023 01:39PM |
Admin Registered: 13 years ago Posts: 19,102 |
[DEPEND] Dependency failed for /dev/md0. [DEPEND] Dependency failed for Swap.
lsblk swapon
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 06, 2023 01:45PM |
Registered: 1 year ago Posts: 50 |
oot@debian:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 1 3.6T 0 disk |-sda1 8:1 1 20G 0 part / |-sda2 8:2 1 1.1G 0 part | `-md1 9:1 0 1.1G 0 raid1 [SWAP] `-sda3 8:3 1 3.6T 0 part `-md2 9:2 0 3.6T 0 raid1 /srv/dev-disk-by-uuid-b6044502-7cf7-47f5-9f85-8182632d032 sdb 8:16 1 3.6T 0 disk |-sdb1 8:17 1 20G 0 part /srv/dev-disk-by-uuid-9b509a33-3753-48a6-917a-b0d309ba686 |-sdb2 8:18 1 1.1G 0 part | `-md1 9:1 0 1.1G 0 raid1 [SWAP] `-sdb3 8:19 1 3.6T 0 part `-md2 9:2 0 3.6T 0 raid1 /srv/dev-disk-by-uuid-b6044502-7cf7-47f5-9f85-8182632d032 sdc 8:32 1 1.9G 0 disk `-sdc1 8:33 1 1.9G 0 part mtdblock0 31:0 0 5M 0 disk mtdblock1 31:1 0 5M 0 disk mtdblock2 31:2 0 5M 0 disk mtdblock3 31:3 0 185M 0 disk mtdblock4 31:4 0 15M 0 disk mtdblock5 31:5 0 20M 0 disk mtdblock6 31:6 0 10M 0 disk mtdblock7 31:7 0 10M 0 disk root@debian:~#
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition June 06, 2023 04:55PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition December 15, 2023 11:49AM |
Registered: 11 months ago Posts: 4 |
BootROM - 1.73 Booting from NAND flash General initialization - Version: 1.0.0 Detected Device ID 6820 High speed PHY - Version: 2.0 Load WD GrandTeton Serdes Config: board SerDes lanes topology details: | Lane # | Speed | Type | -------------------------------- | 0 | 06 | SATA0 | | 1 | 05 | PCIe0 | | 2 | 06 | SATA1 | | 3 | 05 | USB3 HOST1 | | 4 | 05 | USB3 HOST0 | | 5 | 00 | SGMII2 | -------------------------------- PCIe, Idx 0: detected no link High speed PHY - Ended Successfully DDR3 Training Sequence - Ver TIP-1.26.0 mvSysEnvGetTopologyUpdateInfo: TWSI Read failed DDR3 Training Sequence - Switching XBAR Window to FastPath Window DDR3 Training Sequence - Ended Successfully BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01_v1.04 (Nov 25 2023 - 14:07:59) Marvell version: 2014_T3.0p6 mvBoardIdIndexGet(boardId) = 1 Board: GrandTeton DB6820 SoC: MV88F6820 Rev A0 running 2 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 1332 [MHz] L2 @ 666 [MHz] TClock @ 200 [MHz] DDR @ 666 [MHz] DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled DRAM: 1 GiB Map: Code: 0x3fece000:0x3ff96000 BSS: 0x3ffef654 Stack: 0x3f9cdf20 Heap: 0x3f9ce000:0x3fece000 raise: Signal # 8 caught raise: Signal # 8 caught U-Boot Environment: 0x00000000:0x00080000 (NAND) NAND: ID: dac2 ,256 MiB MMC: mv_sdh: 0 PCI-e 0: Detected No Link. USB2.0 0: Host Mode USB3.0 0: Host Mode USB3.0 1: Host Mode Board configuration detected: Creating 1 MTD partitions on "nand0": 0x00000f500000-0x00000ff00000 : "mtd=7" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=7" UBI: MTD device size: 10 MiB UBI: number of good PEBs: 80 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 32 UBI: total number of reserved PEBs: 48 UBI: number of PEBs reserved for bad PEB handling: 2 UBI: max/mean erase counter: 3/0 UBIFS: mounted UBI device 0, volume 0, name "reserve2" UBIFS: mounted read-only UBIFS: file system size: 4063232 bytes (3968 KiB, 3 MiB, 32 LEBs) UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: LZO UBIFS: reserved for root: 200807 bytes (196 KiB) Loading file '/mac_addr' to addr 0x02000000 with size 18 (0x00000012)... Done Set lan 2 WakeOnLan ok Enable HD1 Enable HD2 Net: | port | Interface | PHY address | |--------|-----------|--------------| | egiga0 | RGMII | In-Band | | egiga1 | RGMII | In-Band | | egiga2 | SGMII | 0x00 | egiga0, egiga1, egiga2 [PRIME] Hit any key to stop autoboot: 1 0 Marvell>> printenv CASset=max MALLOC_len=5 MPmode=SMP autoload=no baudrate=115200 boot_order=hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr bootargs=root=/dev/sda2 console=ttyS0,115200 earlyprintk=serial bootargs_dflt=$console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel bootargs_end=:10.4.50.254:255.255.255.0:Armada38x:eth0:none bootargs_root=root=/dev/nfs rw bootcmd=setenv fdt_skip_update yes; setenv usbActive 0; run bootcmd_usb; setenv usbActive 1; run bootcmd_usb; setenv fdt_skip_update no; run bootcmd_stock; reset bootcmd_auto=stage_boot $boot_order bootcmd_fdt=tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr; bootcmd_fdt_boot=tftpboot 0x2000000 $image_name; setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr; bootcmd_fdt_edit=tftpboot $fdtaddr $fdtfile; fdt addr $fdtaddr; setenv bootcmd $bootcmd_fdt_boot bootcmd_lgcy=tftpboot 0x2000000 $image_name; setenv bootargs $bootargs_dflt; bootm 0x2000000; bootcmd_stock=echo Booting from stock ... ; run set_bootargs_stock; printenv bootargs; nand read.e 0xa00000 0x500000 0x500000; nand read.e 0xf00000 0xa00000 0x500000; bootm 0xa00000 0xf00000 bootcmd_usb=echo Booting from USB ... ; usb start; run usb_set_bootargs; if run load_image; then if run load_initrd; then bootm $load_image_addr; $load_initrd_addr; else bootm $load_image_addr; fi; fi; usb stop bootdelay=1 bootdev=usb cacheShare=no console=console=ttyS0,115200 device=0:1 device_partition=0:1 disaMvPnp=no eeeEnable=no enaClockGating=no enaCpuStream=no enaFPU=yes enaMonExt=no enaWrAllo=no eth1addr=00:50:43:87:29:1f eth1mtu=1500 eth2addr=00:50:43:87:4b:1f eth2mtu=1500 eth3addr=00:50:43:29:4b:87 eth3mtu=1500 ethact=egiga2 ethaddr=00:50:43:4b:29:1f ethmtu=1500 ethprime=egiga2 fdt_addr=2040000 fdt_skip_update=no fdtaddr=0x1000000 fdtfile=armada-38x-modular.dtb filesize=12 ide_path=/ image_name=uImage initrd_name=uInitrd ipaddr=192.168.11.110 kernel_addr_r=2080000 lcd0_enable=0 lcd0_params=640x480-16@60 lcd_panel=0 load_image=echo loading Image ... ; ext2load $bootdev $device $load_image_addr /boot/uImage load_image_addr=0x02000020 load_initrd=echo loading uInitrd ... ; ext2load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x2900000 loadaddr=0x02000000 loads_echo=0 mtddevname=u-boot mtddevnum=0 mtdids=nand0=armada-nand mtdparts=mtdparts=armada-nand:5m(u-boot)ro,5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2) mvNetConfig=mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500 mv_pon_addr=00:50:43:1f:4b:87 nandEcc=nfcConfig=4bitecc netbsd_en=no netmask=255.255.255.0 netretry=no partition=nand0,0 pcieTune=no pexMode=RC pxe_files_load=:default.arm-armadaxp-db:default.arm-armadaxp:default.arm pxefile_addr_r=3100000 ramdisk_addr_r=2880000 rootpath=/srv/nfs/ sata_delay_reset=0 sata_dma_mode=yes script_addr_r=3000000 script_name=boot.scr serverip=192.168.11.114 set_bootargs_stock=setenv bootargs root=/dev/ram console=ttyS0,115200 standalone=fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000; stderr=serial stdin=serial stdout=serial usb0Mode=host usbActive=0 usbType=3 usb_set_bootargs=setenv bootargs "console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts earlyprintk=serial init=/bin/system" vxworks_en=no yuk_ethaddr=00:00:00:EE:51:81 Environment size: 4172/524284 bytes Marvell>>
Booting from USB ... (Re)start USB... USB0: Port (usbActive) : 0 Interface (usbType = 3) : USB XHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found loading Image ... 5236595 bytes read in 472 ms (10.6 MiB/s) loading uInitrd ... 9649885 bytes read in 563 ms (16.3 MiB/s) ## Booting image at 02000020 ... ## Booting kernel from Legacy Image at 02000020 ... Image Name: Linux-5.13.8-mvebu-tld-1 Created: 2023-12-13 19:19:22 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5236531 Bytes = 5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.13.8-mvebu-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 SMP PREEMPT Sat Aug 7 14:58:41 PDT 2021 ... ... [ 4.071023][ T538] hub 5-0:1.0: 1 port detected [ 4.076526][ T1] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 4.085156][ T1] Waiting 10 sec before mounting root device... [ 4.129301][ T1442] usb 2-1: new high-speed USB device number 2 using xhci-hcd [ 4.309628][ T1442] usb 2-1: New USB device found, idVendor=0781, idProduct=5151, bcdDevice= 2.00 [ 4.318557][ T1442] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.326450][ T1442] usb 2-1: Product: Cruzer Micro [ 4.331280][ T1442] usb 2-1: Manufacturer: SanDisk [ 4.336099][ T1442] usb 2-1: SerialNumber: 1233930CF760D009 [ 4.342451][ T1442] usb-storage 2-1:1.0: USB Mass Storage device detected [ 4.349600][ T1442] scsi host2: usb-storage 2-1:1.0 [ 5.379672][ T538] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS [ 5.389799][ T7] sd 2:0:0:0: [sda] 3907583 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 5.398191][ T7] sd 2:0:0:0: [sda] Write Protect is off [ 5.403880][ T7] sd 2:0:0:0: [sda] No Caching mode page found [ 5.409961][ T7] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 5.420012][ T7] sda: sda1 [ 5.424270][ T7] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 14.579294][ T1] md: Waiting for all devices to be available before autodetect [ 14.586824][ T1] md: If you don't use raid, use raid=noautodetect [ 14.593230][ T1] md: Autodetecting RAID arrays. [ 14.598048][ T1] md: autorun ... [ 14.601563][ T1] md: ... autorun DONE. [ 14.605912][ T1] VFS: Cannot open root device "LABEL=rootfs" or unknown-block(0,0): error -6 [ 14.614701][ T1] Please append a correct "root=" boot option; here are the available partitions: [ 14.623817][ T1] 1f00 5120 mtdblock0 [ 14.623822][ T1] (driver?) [ 14.631808][ T1] 1f01 5120 mtdblock1 [ 14.631812][ T1] (driver?) [ 14.639798][ T1] 1f02 5120 mtdblock2 [ 14.639802][ T1] (driver?) [ 14.647775][ T1] 1f03 189440 mtdblock3 [ 14.647779][ T1] (driver?) [ 14.655759][ T1] 1f04 15360 mtdblock4 [ 14.655764][ T1] (driver?) [ 14.663765][ T1] 1f05 20480 mtdblock5 [ 14.663769][ T1] (driver?) [ 14.671755][ T1] 1f06 10240 mtdblock6 [ 14.671759][ T1] (driver?) [ 14.679749][ T1] 1f07 10240 mtdblock7 [ 14.679754][ T1] (driver?) [ 14.687725][ T1] 0800 1953791 sda [ 14.687729][ T1] driver: sd [ 14.695272][ T1] 0801 1951744 sda1 2d606287-01 [ 14.695277][ T1] [ 14.703089][ T1] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 14.712099][ T1] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.13.8-mvebu-tld-1 #1.0 [ 14.719974][ T1] Hardware name: Marvell Armada 380/385 (Device Tree) [ 14.726631][ T1] [<c01153e8>] (unwind_backtrace) from [<c01100f8>] (show_stack+0x10/0x14) [ 14.735133][ T1] [<c01100f8>] (show_stack) from [<c0b05d18>] (dump_stack+0x80/0x9c) [ 14.743103][ T1] [<c0b05d18>] (dump_stack) from [<c0b01150>] (panic+0xe4/0x2f0) [ 14.750725][ T1] [<c0b01150>] (panic) from [<c1001ad8>] (mount_block_root+0x1b4/0x238) [ 14.758961][ T1] [<c1001ad8>] (mount_block_root) from [<c1001c4c>] (mount_root+0xf0/0x11c) [ 14.767540][ T1] [<c1001c4c>] (mount_root) from [<c1001dbc>] (prepare_namespace+0x144/0x180) [ 14.776295][ T1] [<c1001dbc>] (prepare_namespace) from [<c1001640>] (kernel_init_freeable+0x230/0x29c) [ 14.785923][ T1] [<c1001640>] (kernel_init_freeable) from [<c0b0d9ac>] (kernel_init+0x8/0x118) [ 14.794855][ T1] [<c0b0d9ac>] (kernel_init) from [<c0100150>] (ret_from_fork+0x14/0x24) [ 14.803173][ T1] Exception stack(0xc18cffb0 to 0xc18cfff8) [ 14.808953][ T1] ffa0: 00000000 00000000 00000000 00000000 [ 14.817875][ T1] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 14.826796][ T1] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 14.834149][ C0] CPU0: stopping [ 14.837574][ C0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.8-mvebu-tld-1 #1.0 [ 14.845451][ C0] Hardware name: Marvell Armada 380/385 (Device Tree) [ 14.852103][ C0] [<c01153e8>] (unwind_backtrace) from [<c01100f8>] (show_stack+0x10/0x14) [ 14.860599][ C0] [<c01100f8>] (show_stack) from [<c0b05d18>] (dump_stack+0x80/0x9c) [ 14.868567][ C0] [<c0b05d18>] (dump_stack) from [<c0112bbc>] (do_handle_IPI+0x250/0x30c) [ 14.876973][ C0] [<c0112bbc>] (do_handle_IPI) from [<c0112c8c>] (ipi_handler+0x14/0x20) [ 14.885291][ C0] [<c0112c8c>] (ipi_handler) from [<c0183c3c>] (handle_percpu_devid_irq+0x58/0x108) [ 14.894575][ C0] [<c0183c3c>] (handle_percpu_devid_irq) from [<c017e820>] (generic_handle_irq+0x28/0x38) [ 14.904377][ C0] [<c017e820>] (generic_handle_irq) from [<c017e9ec>] (__handle_domain_irq+0x90/0xa0) [ 14.913828][ C0] [<c017e9ec>] (__handle_domain_irq) from [<c0621a00>] (gic_handle_irq+0x74/0x84) [ 14.922934][ C0] [<c0621a00>] (gic_handle_irq) from [<c010128c>] (__irq_svc+0x6c/0xa8) [ 14.931163][ C0] Exception stack(0xc1101ef8 to 0xc1101f40) [ 14.936942][ C0] 1ee0: 00000acc ef7cb214 [ 14.945865][ C0] 1f00: 00000000 c011df80 00000000 00000000 c1109fc8 00000001 ffffe000 c110a064 [ 14.954788][ C0] 1f20: c0e5ff53 c1042000 c1103d00 c1101f48 c010cd4c c010cd3c 60000113 ffffffff [ 14.963708][ C0] [<c010128c>] (__irq_svc) from [<c010cd3c>] (arch_cpu_idle+0x1c/0x38) [ 14.971849][ C0] [<c010cd3c>] (arch_cpu_idle) from [<c0b12610>] (default_idle_call+0x30/0x50) [ 14.980689][ C0] [<c0b12610>] (default_idle_call) from [<c0158708>] (do_idle+0x134/0x2b0) [ 14.989184][ C0] [<c0158708>] (do_idle) from [<c0158b80>] (cpu_startup_entry+0x18/0x1c) [ 14.997502][ C0] [<c0158b80>] (cpu_startup_entry) from [<c100120c>] (start_kernel+0x6bc/0x86c) [ 15.006431][ C0] [<c100120c>] (start_kernel) from [<00000000>] (0x0) [ 15.013094][ T1] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
Booting from stock ... bootargs=root=/dev/ram console=ttyS0,115200 NAND read: device 0 offset 0x500000, size 0x500000 5242880 bytes read: OK NAND read: device 0 offset 0xa00000, size 0x500000 5242880 bytes read: OK ## Booting image at 00a00000 ... ## Booting kernel from Legacy Image at 00a00000 ... Image Name: Kernel Created: 2022-10-27 8:25:58 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2928473 Bytes = 2.8 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 00f00000 ... Image Name: Ramdisk Created: 2023-09-04 13:18:46 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 2260297 Bytes = 2.2 MiB Load Address: 00e00000 Entry Point: 00e00000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.22-armada-18.09.3 (kman@kmachine) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Thu Oct 27 08:25:39 UTC 2022 ga-18.09.3 Build-30 ... ... root@MyCloudEX2Ultra # uname -a Linux MyCloudEX2Ultra 4.14.22-armada-18.09.3 #1 SMP Thu Oct 27 08:25:39 UTC 2022 ga-18.09.3 Build-30 armv7l GNU/Linux root@MyCloudEX2Ultra # read /var/log/alert_send.xml not exist
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition December 15, 2023 02:37PM |
Admin Registered: 13 years ago Posts: 19,102 |
Quote
Important: all steps below must be done while logging in as root user (not sudo). If you are not the root user then don't continue, because the rootfs will not work.
su -
Quote
1. Format a new USB drive with a single Ext3 partition, and label it rootfs (Ext4 might work for some MVEBU box)
fdisk /dev/sdb mkfs.ext3 -L rootfs /dev/sdb1
Quote
2. Mount the drive on a Linux box. cd to top level directory and extract the rootfs. Assuming the USB drive is mounted at /media/sdb1
cd /media/sdb1
tar -xjf Debian-5.13.8-mvebu-tld-1-rootfs-bodhi.tar.bz2
Quote
3. Create uImage with DTB appended. I am using the Zyxel NAS326 as an example here. Please replace armada-380-zyxel-nas326.dtb below with the appropriate DTB name for your box.
cd /media/sdb1/boot
cp -a zImage-5.13.8-mvebu-tld-1 zImage.fdt
cat dts/armada-380-zyxel-nas326.dtb >> zImage.fdt
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.13.8-mvebu-tld-1 -d zImage.fdt uImage
Quote
4. Adjust fstab (optional)
Edit /media/sdb1/etc/fstab entry for root device, it it is not Ext3.
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
LABEL=rootfs / ext3 noatime,errors=remount-ro 0 1
5. Sync, umount, and Done
sync
sync
umount /media/sdb1
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition December 16, 2023 02:20AM |
Registered: 11 months ago Posts: 4 |
su # fdisk /dev/sdb d, n, p, w Command (m for help): i Selected partition 1 Device: /dev/sdb1 Start: 2048 End: 3907582 Sectors: 3905535 Cylinders: 1017 Size: 1.9G Id: 83 Type: Linux Start-C/H/S: 0/33/3 End-C/H/S: 1016/33/33 # mkfs.ext3 -L rootfs /dev/sdb1 # cp -a zImage-5.13.8-mvebu-tld-1 zImage.fdt # cat dts/armada-385-wd-ex2-ultra.dtb >> zImage.fdt # mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.13.8-mvebu-tld-1 -d zImage.fdt uImage Image Name: Linux-5.13.8-mvebu-tld-1 Created: Sat Dec 16 11:00:31 2023 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5236531 Bytes = 5113.80 KiB = 4.99 MiB Load Address: 00008000 Entry Point: 00008000
BootROM - 1.73 Booting from NAND flash General initialization - Version: 1.0.0 Detected Device ID 6820 High speed PHY - Version: 2.0 Load WD GrandTeton Serdes Config: board SerDes lanes topology details: | Lane # | Speed | Type | -------------------------------- | 0 | 06 | SATA0 | | 1 | 05 | PCIe0 | | 2 | 06 | SATA1 | | 3 | 05 | USB3 HOST1 | | 4 | 05 | USB3 HOST0 | | 5 | 00 | SGMII2 | -------------------------------- PCIe, Idx 0: detected no link High speed PHY - Ended Successfully DDR3 Training Sequence - Ver TIP-1.26.0 mvSysEnvGetTopologyUpdateInfo: TWSI Read failed DDR3 Training Sequence - Switching XBAR Window to FastPath Window DDR3 Training Sequence - Ended Successfully BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01_v1.04 (Nov 25 2023 - 14:07:59) Marvell version: 2014_T3.0p6 mvBoardIdIndexGet(boardId) = 1 Board: GrandTeton DB6820 SoC: MV88F6820 Rev A0 running 2 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 1332 [MHz] L2 @ 666 [MHz] TClock @ 200 [MHz] DDR @ 666 [MHz] DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled DRAM: 1 GiB Map: Code: 0x3fece000:0x3ff96000 BSS: 0x3ffef654 Stack: 0x3f9cdf20 Heap: 0x3f9ce000:0x3fece000 raise: Signal # 8 caught raise: Signal # 8 caught U-Boot Environment: 0x00000000:0x00080000 (NAND) NAND: ID: dac2 ,256 MiB MMC: mv_sdh: 0 PCI-e 0: Detected No Link. USB2.0 0: Host Mode USB3.0 0: Host Mode USB3.0 1: Host Mode Board configuration detected: Creating 1 MTD partitions on "nand0": 0x00000f500000-0x00000ff00000 : "mtd=7" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=7" UBI: MTD device size: 10 MiB UBI: number of good PEBs: 80 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 32 UBI: total number of reserved PEBs: 48 UBI: number of PEBs reserved for bad PEB handling: 2 UBI: max/mean erase counter: 3/0 UBIFS: mounted UBI device 0, volume 0, name "reserve2" UBIFS: mounted read-only UBIFS: file system size: 4063232 bytes (3968 KiB, 3 MiB, 32 LEBs) UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: LZO UBIFS: reserved for root: 200807 bytes (196 KiB) Loading file '/mac_addr' to addr 0x02000000 with size 18 (0x00000012)... Done Set lan 2 WakeOnLan ok Enable HD1 Enable HD2 Net: | port | Interface | PHY address | |--------|-----------|--------------| | egiga0 | RGMII | In-Band | | egiga1 | RGMII | In-Band | | egiga2 | SGMII | 0x00 | egiga0, egiga1, egiga2 [PRIME] Hit any key to stop autoboot: 1 0 Booting from USB ... (Re)start USB... USB0: Port (usbActive) : 0 Interface (usbType = 3) : USB XHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found loading Image ... 5236595 bytes read in 472 ms (10.6 MiB/s) loading uInitrd ... 9649885 bytes read in 568 ms (16.2 MiB/s) ## Booting image at 02000020 ... ## Booting kernel from Legacy Image at 02000020 ... Image Name: Linux-5.13.8-mvebu-tld-1 Created: 2023-12-16 8:00:31 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5236531 Bytes = 5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.13.8-mvebu-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 SMP PREEMPT Sat Aug 7 14:58:41 PDT 2021 [ 0.000000][ T0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000][ T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000][ T0] OF: fdt: Machine model: WD MyCloud Ex2 Ultra [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writealloc [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000][ T0] HighMem [mem 0x0000000030000000-0x000000003fffffff] [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000][ T0] percpu: Embedded 21 pages/cpu s54668 r8192 d23156 u86016 [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=armada-nand:5m(u-boot)ro,5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2) earlyprintk=serial init=/bin/system [ 0.000000][ T0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 1021128K/1048576K available (11264K kernel code, 1483K rwdata, 3112K rodata, 1024K init, 325K bss, 27448K reserved, 0K cma-reserved, 262144K highmem) [ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x404/0x78c with crng_init=0 [ 0.000000][ T0] trace event string verifier disabled [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000 [ 0.000000][ T0] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000][ T0] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000][ T0] L2C-310 D prefetch enabled, offset 1 lines [ 0.000000][ T0] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000][ T0] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB [ 0.000000][ T0] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001 [ 0.000001][ T0] sched_clock: 64 bits at 666MHz, resolution 1ns, wraps every 4398046511103ns [ 0.008682][ T0] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x999999d70a, max_idle_ns: 440795225152 ns [ 0.020390][ T0] Switching to timer-based delay loop, resolution 1ns [ 0.027194][ T0] Ignoring duplicate/late registration of read_current_timer delay [ 0.034912][ T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.047021][ T0] Console: colour dummy device 80x30 [ 0.052168][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 1332.00 BogoMIPS (lpj=6660000) [ 0.063439][ T0] pid_max: default: 32768 minimum: 301 [ 0.068861][ T0] LSM: Security Framework initializing [ 0.074205][ T0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.082191][ T0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.091198][ T0] CPU: Testing write buffer coherency: ok [ 0.096767][ T0] CPU0: Spectre v2: using BPIALL workaround [ 0.102631][ T1] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.109440][ T1] Setting up static identity map for 0x100000 - 0x100060 [ 0.116387][ T1] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4 [ 0.122336][ T1] mvebu-pmsu: Initializing Power Management Service Unit [ 0.129293][ T1] rcu: Hierarchical SRCU implementation. [ 0.135296][ T1] smp: Bringing up secondary CPUs ... [ 0.140919][ T1] Booting CPU 1 [ 0.144376][ T0] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.144386][ T0] CPU1: Spectre v2: using BPIALL workaround [ 0.156532][ T1] smp: Brought up 1 node, 2 CPUs [ 0.161334][ T1] SMP: Total of 2 processors activated (2664.00 BogoMIPS). [ 0.168367][ T1] CPU: All CPU(s) started in SVC mode. [ 0.174040][ T1] devtmpfs: initialized [ 0.180914][ T1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.189430][ T24] wait_for_initramfs() called before rootfs_initcalls [ 0.189570][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.206549][ T1] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.236369][ T1] prandom32: self test passed (less than 6 bits correlated) [ 0.243506][ T1] prandom: seed boundary self test passed [ 0.250626][ T1] prandom: 100 self tests passed [ 0.255411][ T1] pinctrl core: initialized pinctrl subsystem [ 0.262476][ T1] NET: Registered protocol family 16 [ 0.268381][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.276520][ T1] audit: initializing netlink subsys (disabled) [ 0.282731][ T36] audit: type=2000 audit(0.250:1): state=initialized audit_enabled=0 res=1 [ 0.283909][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.291442][ T1] cpuidle: using governor ladder [ 0.302926][ T1] cpuidle: using governor menu [ 0.307727][ T1] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.316397][ T1] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.323052][ T1] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling [ 0.331834][ T1] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling [ 0.547092][ T1] raid6: int32x8 gen() 243 MB/s [ 0.717103][ T1] raid6: int32x8 xor() 168 MB/s [ 0.887107][ T1] raid6: int32x4 gen() 280 MB/s [ 1.057129][ T1] raid6: int32x4 xor() 170 MB/s [ 1.227062][ T1] raid6: int32x2 gen() 447 MB/s [ 1.397045][ T1] raid6: int32x2 xor() 258 MB/s [ 1.567063][ T1] raid6: int32x1 gen() 497 MB/s [ 1.737039][ T1] raid6: int32x1 xor() 208 MB/s [ 1.741984][ T1] raid6: using algorithm int32x1 gen() 497 MB/s [ 1.748063][ T1] raid6: .... xor() 208 MB/s, rmw enabled [ 1.753613][ T1] raid6: using intx1 recovery algorithm [ 1.759770][ T1] vgaarb: loaded [ 1.763482][ T1] SCSI subsystem initialized [ 1.768249][ T1] usbcore: registered new interface driver usbfs [ 1.774445][ T1] usbcore: registered new interface driver hub [ 1.780489][ T1] usbcore: registered new device driver usb [ 1.786431][ T1] mc: Linux media interface: v0.10 [ 1.791432][ T1] videodev: Linux video capture interface: v2.00 [ 1.797687][ T1] pps_core: LinuxPPS API ver. 1 registered [ 1.803326][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.813143][ T1] PTP clock support registered [ 1.819104][ T1] clocksource: Switched to clocksource arm_global_timer [ 1.853500][ T1] VFS: Disk quotas dquot_6.6.0 [ 1.858171][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.872746][ T1] NET: Registered protocol family 2 [ 1.877903][ T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.889122][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.898168][ T1] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.906788][ T1] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.914901][ T1] TCP: Hash tables configured (established 8192 bind 8192) [ 1.922078][ T1] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 1.930222][ T1] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.937528][ T1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.945392][ T1] NET: Registered protocol family 1 [ 1.950830][ T1] RPC: Registered named UNIX socket transport module. [ 1.957423][ T1] RPC: Registered udp transport module. [ 1.962853][ T1] RPC: Registered tcp transport module. [ 1.968232][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.975409][ T1] PCI: CLS 0 bytes, default 64 [ 1.980171][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.987575][ T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 2.626493][ T1] Initialise system trusted keyrings [ 2.631674][ T1] Key type blacklist registered [ 2.636676][ T1] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 2.644012][ T1] zbud: loaded [ 2.648092][ T1] NFS: Registering the id_resolver key type [ 2.653851][ T1] Key type id_resolver registered [ 2.658712][ T1] Key type id_legacy registered [ 2.663446][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.670833][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.678893][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.746478][ T1] xor: measuring software checksum speed [ 2.756494][ T1] arm4regs : 2172 MB/sec [ 2.767558][ T1] 8regs : 1637 MB/sec [ 2.778277][ T1] 32regs : 1733 MB/sec [ 2.783316][ T1] xor: using function: arm4regs (2172 MB/sec) [ 2.789226][ T1] async_tx: api initialized (async) [ 2.794261][ T1] Key type asymmetric registered [ 2.799033][ T1] Asymmetric key parser 'x509' registered [ 2.804676][ T1] bounce: pool size: 64 pages [ 2.809266][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 2.817393][ T1] io scheduler bfq registered [ 2.823408][ T1] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver [ 2.831834][ T1] debugfs: Directory 'f1018100.gpio' with parent 'regmap' already present! [ 2.840799][ T1] debugfs: Directory 'f1018140.gpio' with parent 'regmap' already present! [ 2.850098][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 2.909672][ T1] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 2.919269][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 2.979669][ T1] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 3.052857][ T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.062499][ T1] printk: console [ttyS0] disabled [ 3.087591][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 31, base_baud = 12500000) is a 16550A [ 3.097352][ T1] printk: console [ttyS0] enabled [ 3.097352][ T1] printk: console [ttyS0] enabled [ 3.107187][ T1] printk: bootconsole [earlycon0] disabled [ 3.107187][ T1] printk: bootconsole [earlycon0] disabled [ 3.139670][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 32, base_baud = 12500000) is a 16550A [ 3.150385][ T1] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy regulator [ 3.158816][ T1] ahci-mvebu f10a8000.sata: supply phy not found, using dummy regulator [ 3.167104][ T1] ahci-mvebu f10a8000.sata: supply target not found, using dummy regulator [ 3.175708][ T1] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 3.185521][ T1] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 3.196058][ T1] scsi host0: ahci-mvebu [ 3.200649][ T1] scsi host1: ahci-mvebu [ 3.204943][ T1] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 52 [ 3.213629][ T1] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 52 [ 3.223410][ T1] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda [ 3.230554][ T1] nand: Macronix MX30LF2G18AC [ 3.235112][ T1] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 3.244014][ T1] Bad block table found at page 131008, version 0x01 [ 3.251246][ T1] Bad block table found at page 130944, version 0x01 [ 3.258140][ T1] nand_read_bbt: bad block at 0x000003bc0000 [ 3.264022][ T1] nand_read_bbt: bad block at 0x000005be0000 [ 3.269966][ T1] 8 fixed-partitions partitions found on MTD device pxa3xx_nand-0 [ 3.277667][ T1] Creating 8 MTD partitions on "pxa3xx_nand-0": [ 3.283803][ T1] 0x000000000000-0x000000500000 : "U-Boot" [ 3.290419][ T1] 0x000000500000-0x000000a00000 : "uImage" [ 3.296925][ T1] 0x000000a00000-0x000000f00000 : "uRamdisk" [ 3.303624][ T1] 0x000000f00000-0x00000c800000 : "image.cfs" [ 3.310776][ T1] 0x00000c800000-0x00000d700000 : "rescue fw" [ 3.317592][ T1] 0x00000d700000-0x00000eb00000 : "config" [ 3.324153][ T1] 0x00000eb00000-0x00000f500000 : "reserve1" [ 3.330849][ T1] 0x00000f500000-0x00000ff00000 : "reserve2" [ 3.338062][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 3.346663][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 3.357687][ T1] libphy: Fixed MDIO Bus: probed [ 3.363487][ T1] libphy: orion_mdio_bus: probed [ 3.369477][ T1] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled [ 3.381521][ T1] mvneta f1034000.ethernet eth0: Using random mac address 4e:7c:1f:a1:16:6b [ 3.390459][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.397745][ T1] ehci-pci: EHCI PCI platform driver [ 3.402972][ T1] ehci-orion: EHCI orion driver [ 3.407859][ T1] orion-ehci f1058000.usb: EHCI Host Controller [ 3.414021][ T1] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 [ 3.422425][ T1] orion-ehci f1058000.usb: irq 48, io mem 0xf1058000 [ 3.449119][ T1] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 [ 3.455960][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 3.465002][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.472989][ T1] usb usb1: Product: EHCI Host Controller [ 3.478608][ T1] usb usb1: Manufacturer: Linux 5.13.8-mvebu-tld-1 ehci_hcd [ 3.485802][ T1] usb usb1: SerialNumber: f1058000.usb [ 3.491560][ T1] hub 1-0:1.0: USB hub found [ 3.496058][ T1] hub 1-0:1.0: 1 port detected [ 3.501803][ T1] usbcore: registered new interface driver usblp [ 3.508099][ T1] usbcore: registered new interface driver usb-storage [ 3.515098][ T1] mousedev: PS/2 mouse device common for all mice [ 3.522417][ T1] armada38x-rtc f10a3800.rtc: registered as rtc0 [ 3.528750][ T1] armada38x-rtc f10a3800.rtc: setting system clock to 2023-12-16T08:06:58 UTC (1702714018) [ 3.539662][ T1] i2c /dev entries driver [ 3.544052][ T1] mv64xxx_i2c f1011000.i2c: can't get pinctrl, bus recovery not supported [ 3.550483][ T1243] ata2: SATA link down (SStatus 0 SControl 300) [ 3.558752][ T1238] ata1: SATA link down (SStatus 0 SControl 300) [ 3.565154][ T1] mv64xxx_i2c f1011100.i2c: can't get pinctrl, bus recovery not supported [ 3.576164][ T1] orion_wdt: Initial timeout 171 sec [ 3.581754][ T1] device-mapper: uevent: version 1.0.3 [ 3.587285][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 3.596687][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 3.603969][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 3.611328][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 3.618708][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 3.625542][ T1] device-mapper: raid: Loading target version 1.15.1 [ 3.634794][ T1] marvell-cesa f1090000.crypto: CESA device successfully registered [ 3.642882][ T1] hid: raw HID events driver (C) Jiri Kosina [ 3.648982][ T1] usbcore: registered new interface driver usbhid [ 3.655330][ T1] usbhid: USB HID core driver [ 3.660147][ T1] drop_monitor: Initializing network drop monitor service [ 3.667464][ T1] NET: Registered protocol family 10 [ 3.673395][ T1] Segment Routing with IPv6 [ 3.677780][ T1] RPL Segment Routing with IPv6 [ 3.682589][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.690159][ T1] NET: Registered protocol family 17 [ 3.695456][ T1] 8021q: 802.1Q VLAN Support v1.8 [ 3.700418][ T1] Key type dns_resolver registered [ 3.705556][ T1] ThumbEE CPU extension supported. [ 3.710564][ T1] Registering SWP/SWPB emulation handler [ 3.716406][ T1] registered taskstats version 1 [ 3.721266][ T1] Loading compiled-in X.509 certificates [ 3.727173][ T1] zswap: loaded using pool lzo/zbud [ 3.732516][ T1] Key type ._fscrypt registered [ 3.737251][ T1] Key type .fscrypt registered [ 3.741913][ T1] Key type fscrypt-provisioning registered [ 3.748759][ T1] Key type big_key registered [ 3.754099][ T1] Key type encrypted registered [ 3.761602][ T535] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 3.767663][ T535] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2 [ 3.776034][ T535] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 [ 3.786097][ T535] xhci-hcd f10f0000.usb3: irq 54, io mem 0xf10f0000 [ 3.792825][ T535] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 3.801858][ T535] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.809833][ T535] usb usb2: Product: xHCI Host Controller [ 3.815438][ T535] usb usb2: Manufacturer: Linux 5.13.8-mvebu-tld-1 xhci-hcd [ 3.822627][ T535] usb usb2: SerialNumber: f10f0000.usb3 [ 3.828559][ T535] hub 2-0:1.0: USB hub found [ 3.833080][ T535] hub 2-0:1.0: 1 port detected [ 3.838080][ T535] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 3.844159][ T535] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3 [ 3.852412][ T535] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed [ 3.859617][ T535] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.868538][ T535] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13 [ 3.877567][ T535] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.885545][ T535] usb usb3: Product: xHCI Host Controller [ 3.891158][ T535] usb usb3: Manufacturer: Linux 5.13.8-mvebu-tld-1 xhci-hcd [ 3.898334][ T535] usb usb3: SerialNumber: f10f0000.usb3 [ 3.904228][ T535] hub 3-0:1.0: USB hub found [ 3.908732][ T535] hub 3-0:1.0: 1 port detected [ 3.914041][ T535] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 3.920119][ T535] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4 [ 3.928423][ T535] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 [ 3.938443][ T535] xhci-hcd f10f8000.usb3: irq 55, io mem 0xf10f8000 [ 3.945254][ T535] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 3.954285][ T535] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.962258][ T535] usb usb4: Product: xHCI Host Controller [ 3.967863][ T535] usb usb4: Manufacturer: Linux 5.13.8-mvebu-tld-1 xhci-hcd [ 3.975097][ T535] usb usb4: SerialNumber: f10f8000.usb3 [ 3.981124][ T535] hub 4-0:1.0: USB hub found [ 3.985622][ T535] hub 4-0:1.0: 1 port detected [ 3.990681][ T535] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 3.996733][ T535] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5 [ 4.004997][ T535] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed [ 4.012150][ T535] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.021153][ T535] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13 [ 4.030178][ T535] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.038141][ T535] usb usb5: Product: xHCI Host Controller [ 4.043754][ T535] usb usb5: Manufacturer: Linux 5.13.8-mvebu-tld-1 xhci-hcd [ 4.050987][ T535] usb usb5: SerialNumber: f10f8000.usb3 [ 4.056855][ T535] hub 5-0:1.0: USB hub found [ 4.061370][ T535] hub 5-0:1.0: 1 port detected [ 4.067008][ T1] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 4.075460][ T1] Waiting 10 sec before mounting root device... [ 4.119130][ T25] usb 2-1: new high-speed USB device number 2 using xhci-hcd [ 4.299452][ T25] usb 2-1: New USB device found, idVendor=0781, idProduct=5151, bcdDevice= 2.00 [ 4.308381][ T25] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.316271][ T25] usb 2-1: Product: Cruzer Micro [ 4.321101][ T25] usb 2-1: Manufacturer: SanDisk [ 4.325919][ T25] usb 2-1: SerialNumber: 1233930CF760D009 [ 4.332290][ T25] usb-storage 2-1:1.0: USB Mass Storage device detected [ 4.339420][ T25] scsi host2: usb-storage 2-1:1.0 [ 5.379526][ T23] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS [ 5.389777][ T535] sd 2:0:0:0: [sda] 3907583 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 5.398155][ T535] sd 2:0:0:0: [sda] Write Protect is off [ 5.403840][ T535] sd 2:0:0:0: [sda] No Caching mode page found [ 5.409919][ T535] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 5.420003][ T535] sda: sda1 [ 5.424311][ T535] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 14.579118][ T1] md: Waiting for all devices to be available before autodetect [ 14.586649][ T1] md: If you don't use raid, use raid=noautodetect [ 14.593054][ T1] md: Autodetecting RAID arrays. [ 14.597872][ T1] md: autorun ... [ 14.601387][ T1] md: ... autorun DONE. [ 14.605747][ T1] VFS: Cannot open root device "LABEL=rootfs" or unknown-block(0,0): error -6 [ 14.614517][ T1] Please append a correct "root=" boot option; here are the available partitions: [ 14.623643][ T1] 1f00 5120 mtdblock0 [ 14.623648][ T1] (driver?) [ 14.631636][ T1] 1f01 5120 mtdblock1 [ 14.631641][ T1] (driver?) [ 14.639628][ T1] 1f02 5120 mtdblock2 [ 14.639632][ T1] (driver?) [ 14.647605][ T1] 1f03 189440 mtdblock3 [ 14.647609][ T1] (driver?) [ 14.655588][ T1] 1f04 15360 mtdblock4 [ 14.655592][ T1] (driver?) [ 14.663594][ T1] 1f05 20480 mtdblock5 [ 14.663599][ T1] (driver?) [ 14.671583][ T1] 1f06 10240 mtdblock6 [ 14.671588][ T1] (driver?) [ 14.679574][ T1] 1f07 10240 mtdblock7 [ 14.679578][ T1] (driver?) [ 14.687550][ T1] 0800 1953791 sda [ 14.687554][ T1] driver: sd [ 14.695102][ T1] 0801 1952767 sda1 2d606287-01 [ 14.695106][ T1] [ 14.702920][ T1] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 14.711929][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.8-mvebu-tld-1 #1.0 [ 14.719805][ T1] Hardware name: Marvell Armada 380/385 (Device Tree) [ 14.726460][ T1] [<c01153e8>] (unwind_backtrace) from [<c01100f8>] (show_stack+0x10/0x14) [ 14.734962][ T1] [<c01100f8>] (show_stack) from [<c0b05d18>] (dump_stack+0x80/0x9c) [ 14.742932][ T1] [<c0b05d18>] (dump_stack) from [<c0b01150>] (panic+0xe4/0x2f0) [ 14.750553][ T1] [<c0b01150>] (panic) from [<c1001ad8>] (mount_block_root+0x1b4/0x238) [ 14.758788][ T1] [<c1001ad8>] (mount_block_root) from [<c1001c4c>] (mount_root+0xf0/0x11c) [ 14.767368][ T1] [<c1001c4c>] (mount_root) from [<c1001dbc>] (prepare_namespace+0x144/0x180) [ 14.776122][ T1] [<c1001dbc>] (prepare_namespace) from [<c1001640>] (kernel_init_freeable+0x230/0x29c) [ 14.785751][ T1] [<c1001640>] (kernel_init_freeable) from [<c0b0d9ac>] (kernel_init+0x8/0x118) [ 14.794682][ T1] [<c0b0d9ac>] (kernel_init) from [<c0100150>] (ret_from_fork+0x14/0x24) [ 14.802999][ T1] Exception stack(0xc18cffb0 to 0xc18cfff8) [ 14.808778][ T1] ffa0: 00000000 00000000 00000000 00000000 [ 14.817700][ T1] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 14.826621][ T1] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 14.833974][ C1] CPU1: stopping [ 14.837398][ C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.13.8-mvebu-tld-1 #1.0 [ 14.845275][ C1] Hardware name: Marvell Armada 380/385 (Device Tree) [ 14.851927][ C1] [<c01153e8>] (unwind_backtrace) from [<c01100f8>] (show_stack+0x10/0x14) [ 14.860422][ C1] [<c01100f8>] (show_stack) from [<c0b05d18>] (dump_stack+0x80/0x9c) [ 14.868390][ C1] [<c0b05d18>] (dump_stack) from [<c0112bbc>] (do_handle_IPI+0x250/0x30c) [ 14.876795][ C1] [<c0112bbc>] (do_handle_IPI) from [<c0112c8c>] (ipi_handler+0x14/0x20) [ 14.885114][ C1] [<c0112c8c>] (ipi_handler) from [<c0183c3c>] (handle_percpu_devid_irq+0x58/0x108) [ 14.894397][ C1] [<c0183c3c>] (handle_percpu_devid_irq) from [<c017e820>] (generic_handle_irq+0x28/0x38) [ 14.904199][ C1] [<c017e820>] (generic_handle_irq) from [<c017e9ec>] (__handle_domain_irq+0x90/0xa0) [ 14.913650][ C1] [<c017e9ec>] (__handle_domain_irq) from [<c0621a00>] (gic_handle_irq+0x74/0x84) [ 14.922756][ C1] [<c0621a00>] (gic_handle_irq) from [<c010128c>] (__irq_svc+0x6c/0xa8) [ 14.930985][ C1] Exception stack(0xc18edf50 to 0xc18edf98) [ 14.936765][ C1] df40: 00001a20 ef7e0214 00000000 c011df80 [ 14.945688][ C1] df60: 00000000 00000000 c1109fc8 00000002 ffffe000 c110a064 c0e5ff53 00000000 [ 14.954609][ C1] df80: 00000000 c18edfa0 c010cd4c c010cd3c 60000113 ffffffff [ 14.961958][ C1] [<c010128c>] (__irq_svc) from [<c010cd3c>] (arch_cpu_idle+0x1c/0x38) [ 14.970100][ C1] [<c010cd3c>] (arch_cpu_idle) from [<c0b12610>] (default_idle_call+0x30/0x50) [ 14.978941][ C1] [<c0b12610>] (default_idle_call) from [<c0158708>] (do_idle+0x134/0x2b0) [ 14.987436][ C1] [<c0158708>] (do_idle) from [<c0158b80>] (cpu_startup_entry+0x18/0x1c) [ 14.995755][ C1] [<c0158b80>] (cpu_startup_entry) from [<00101e50>] (0x101e50) [ 15.003292][ T1] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition December 16, 2023 10:06AM |
Admin Registered: 13 years ago Posts: 19,102 |
loading Image ... 5236595 bytes read in 472 ms (10.6 MiB/s) loading uInitrd ... 9649885 bytes read in 568 ms (16.2 MiB/s) ## Booting image at 02000020 ... ## Booting kernel from Legacy Image at 02000020 ... Image Name: Linux-5.13.8-mvebu-tld-1 Created: 2023-12-16 8:00:31 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5236531 Bytes = 5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
printenv
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition December 16, 2023 01:17PM |
Registered: 11 months ago Posts: 4 |
Marvell>> printenv CASset=max MALLOC_len=5 MPmode=SMP autoload=no baudrate=115200 boot_order=hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr bootargs=root=/dev/sda2 console=ttyS0,115200 earlyprintk=serial bootargs_dflt=$console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel bootargs_end=:10.4.50.254:255.255.255.0:Armada38x:eth0:none bootargs_root=root=/dev/nfs rw bootcmd=setenv fdt_skip_update yes; setenv usbActive 0; run bootcmd_usb; setenv usbActive 1; run bootcmd_usb; setenv fdt_skip_update no; run bootcmd_stock; reset bootcmd_auto=stage_boot $boot_order bootcmd_fdt=tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr; bootcmd_fdt_boot=tftpboot 0x2000000 $image_name; setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr; bootcmd_fdt_edit=tftpboot $fdtaddr $fdtfile; fdt addr $fdtaddr; setenv bootcmd $bootcmd_fdt_boot bootcmd_lgcy=tftpboot 0x2000000 $image_name; setenv bootargs $bootargs_dflt; bootm 0x2000000; bootcmd_stock=echo Booting from stock ... ; run set_bootargs_stock; printenv bootargs; nand read.e 0xa00000 0x500000 0x500000; nand read.e 0xf00000 0xa00000 0x500000; bootm 0xa00000 0xf00000 bootcmd_usb=echo Booting from USB ... ; usb start; run usb_set_bootargs; if run load_image; then if run load_initrd; then bootm $load_image_addr; $load_initrd_addr; else bootm $load_image_addr; fi; fi; usb stop bootdelay=1 bootdev=usb cacheShare=no console=console=ttyS0,115200 device=0:1 device_partition=0:1 disaMvPnp=no eeeEnable=no enaClockGating=no enaCpuStream=no enaFPU=yes enaMonExt=no enaWrAllo=no eth1addr=00:50:43:87:29:1f eth1mtu=1500 eth2addr=00:50:43:87:4b:1f eth2mtu=1500 eth3addr=00:50:43:29:4b:87 eth3mtu=1500 ethact=egiga2 ethaddr=00:50:43:4b:29:1f ethmtu=1500 ethprime=egiga2 fdt_addr=2040000 fdt_skip_update=no fdtaddr=0x1000000 fdtfile=armada-38x-modular.dtb filesize=12 ide_path=/ image_name=uImage initrd_name=uInitrd ipaddr=192.168.11.110 kernel_addr_r=2080000 lcd0_enable=0 lcd0_params=640x480-16@60 lcd_panel=0 load_image=echo loading Image ... ; ext2load $bootdev $device $load_image_addr /boot/uImage load_image_addr=0x02000020 load_initrd=echo loading uInitrd ... ; ext2load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x2900000 loadaddr=0x02000000 loads_echo=0 mtddevname=u-boot mtddevnum=0 mtdids=nand0=armada-nand mtdparts=mtdparts=armada-nand:5m(u-boot)ro,5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2) mvNetConfig=mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500 mv_pon_addr=00:50:43:1f:4b:87 nandEcc=nfcConfig=4bitecc netbsd_en=no netmask=255.255.255.0 netretry=no partition=nand0,0 pcieTune=no pexMode=RC pxe_files_load=:default.arm-armadaxp-db:default.arm-armadaxp:default.arm pxefile_addr_r=3100000 ramdisk_addr_r=2880000 rootpath=/srv/nfs/ sata_delay_reset=0 sata_dma_mode=yes script_addr_r=3000000 script_name=boot.scr serverip=192.168.11.114 set_bootargs_stock=setenv bootargs root=/dev/ram console=ttyS0,115200 standalone=fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000; stderr=serial stdin=serial stdout=serial usb0Mode=host usbActive=0 usbType=3 usb_set_bootargs=setenv bootargs "console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts earlyprintk=serial init=/bin/system" vxworks_en=no yuk_ethaddr=00:00:00:EE:51:81 Environment size: 4172/524284 bytes Marvell>>
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition December 16, 2023 01:55PM |
Admin Registered: 13 years ago Posts: 19,102 |
bootcmd_usb=echo Booting from USB ... ; usb start; run usb_set_bootargs; if run load_image; then if run load_initrd; then bootm $load_image_addr; $load_initrd_addr; else bootm $load_image_addr; fi; fi; usb stop
setenv bootcmd_usb 'echo Booting from USB ... ; usb start; run usb_set_bootargs; if run load_image; then if run load_initrd; then bootm $load_image_addr $load_initrd_addr; else bootm $load_image_addr; fi; fi; usb stop'And boot
boot
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition December 16, 2023 02:30PM |
Registered: 11 months ago Posts: 4 |
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition February 10, 2024 01:58PM |
Registered: 9 months ago Posts: 1 |
Jay Kumar
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition March 03, 2024 02:24AM |
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition March 12, 2024 12:09AM |
Registered: 9 months ago Posts: 6 |
Re: How to install Debian in a WD MyCloud EX2 Ultra: Definitive edition March 12, 2024 01:12AM |
Admin Registered: 13 years ago Posts: 19,102 |