goFlex Net bricked

Hi !

i trried to install wheezy regarding your howto but it failes (kernel too old problem) so i tried the same with squeeze and it went thruogh but after first recommend reboot device never came back to life :(
unfotunately i disbaled pogo service so ia had no way to ssh access.
without usb stick i get this
with usb stick this
renaming files on usb stick to uImage and uInitrd also does not work (it reads the files but stops with
"Wrong Image Format for bootm command"

So to the question(s) is it possible to enable pogo service again via uboot ? Or which system is easiest now to install ?

Ciao goerdi

Easiest to use Davy's rootfs:
http://forum.doozan.com/read.php?2,8722,11448#msg-11448

Thanks.. now it's complete dead :(

GoFlexNet> tftpboot 0x800000 uboot.NAND-NSA320-IDEfixedv4-scripted.kwb
Using egiga0 device
TFTP from server 192.168.63.1; our IP address is 192.168.63.24
Filename 'uboot.NAND-NSA320-IDEfixedv4-scripted.kwb'.
Load address: 0x800000
Loading: ####################################
done
Bytes transferred = 524288 (80000 hex)
GoFlexNet> nand erase 0x0 0x80000

NAND erase: device 0 offset 0x0, size 0x80000
Erasing at 0x60000 -- 100% complete.
OK
GoFlexNet> nand write.e 0x800000 0x0 0x80000

NAND write: device 0 offset 0x0, size 0x80000
 524288 bytes written: OK
GoFlexNet> reset
resetting ...


U-Boot 2011.12 (May 03 2012 - 17:04:23)
ZyXEL NSA320 2-Bay Power Media Server

SoC:   Kirkwood 88F6281_A1

Thats all ....

Ciao Gerd



Edited 1 time(s). Last edit at 02/07/2013 02:15PM by goerdi.

bodhi Wrote:
-------------------------------------------------------
> Easiest to use Davy's rootfs:
> http://forum.doozan.com/read.php?2,8722,11448#msg-
> 11448

Rootfs, not uBoot :)

You can use Uart booting to recover:
http://forum.doozan.com/read.php?3,7852

OK where can i find the named file in the thread ?

uboot.goflexnet-IDEpatched-netconsoleON.kwb

Ciao Gerd

You can find GoFlex Net Uboot image in davygravy's post (or in his Dropbox link in his signature):
http://forum.doozan.com/read.php?3,6965

Hi !

OK it's back alive.... :)
but anyway.. with rescue system 2.8.x i can't install debian wheezy with the script, because it's complaining about /usr/bin/perl and tell me to unset x-bit (but that isn't possible bec. of r/o filesystem.....
with archlinux arm => it works....

Ciao ger