Need running sda1 system tarred

Hello,
I have a goflex net and I am trying to install debian on flash.

Unfortunately install scripts gave me errors. Now I am able to boot the system only from a rescue system in usb key.
I tried the script to install rescue in mtdblock but I am not able to boot from it.
So I think that the best thing to have is a tar of a already working debian filesystem like ArchLinux for arm is doing.

Can you help me and provide it to me?

Thanks,
Mario

mgiammarco Wrote:
-------------------------------------------------------
> Hello,
> I have a goflex net and I am trying to install
> debian on flash.
>
> Unfortunately install scripts gave me errors. Now
> I am able to boot the system only from a rescue
> system in usb key.
> I tried the script to install rescue in mtdblock
> but I am not able to boot from it.
> So I think that the best thing to have is a tar of
> a already working debian filesystem like ArchLinux
> for arm is doing.
>

> Can you help me and provide it to me?
>
> Thanks,
> Mario

Try Davy's rootfs for NSA320:
http://forum.doozan.com/read.php?2,7806

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Thanks, it seems to work!
At least it seems it boots correctly.
But then it does not ask for dhcp and I do not know also root password.

Can you help me again?

Thanks,
Mario

you can see IP adress in router ( i did find it there )
and enter with root/root ( login/password )

It boots but it does not take dhcp address.
I have made the situation worse. I was able to boot with internal image.
So I followed this guide:

http://morschi.com/2012/10/05/seagate-goflex-net-debian/

To make perl working I deleted the directories in the guide above.

Now there was an error at the end of the script. I was not able to give any shell command because now I get:

id: error while loading shared libraries: libselinux.so.1: cannot open shared object file: No such file or directory

on each command I type.
So I rebooted. It booted from internal rom. I can ssh into but again I have the same error about libselinux missing and so I cannot input any command.

What can I do now? It is not bricked but I cannot work the same.

Thanks again for help.

Mario