Welcome! Log In Create A New Profile

Advanced

Debian on TBS2921 MOI+

Posted by ri8 
Re: Debian on TBS2921 MOI+
December 13, 2024 01:30PM
Alex,

> root@debian:~# ls -lh mtd1.dupm
> -rw-r--r-- 1 root root 511M Dec 13 01:25
> mtd1.dupm
> It's quite something there, or not?!

Perhaps. Use hexedit to look at its content.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Re: Debian on TBS2921 MOI+
December 13, 2024 02:19PM
Alex,

> I found another thread on this site,
> that on embeddian, startted from jeff:
> - booting debian from NAND
>
> I could write to this thread, but since
> the thread is rather old,

Emdebian is no longer supported for quite many years, so should not be used.

If you want a rescue system on NAND, look into OpenWrt. In the Rescue sub-forum:

https://forum.doozan.com/read.php?4,86219
https://forum.doozan.com/read.php?4,42279

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
ri8
Re: Debian on TBS2921 MOI+
December 14, 2024 02:21AM
bodhi,

good, that i've asked you before;

i've tried already a lot of openwrt
images in the past
with an old NSA325 uboot, but now
i've forgotten, which of them worked
best (eth0). what i well
can remember, it was only one of them,
where eth0 were working- but unusable,
because of a unsupressable echo on it.
(had i knew about a trick with ethtool at that time!)
Therefore, what do you think would be the closest quess
for openwrt image for that box?

Regards, alex
ri8
Re: Debian on TBS2921 MOI+
December 14, 2024 06:09AM
bodhi,

have i folow the path for zyxels,
as you suggested for those devices, and change
mtdparts like:

fw_setenv mtdparts 'mtdparts=orion_nand:0x100000@0x0(u-boot),-@0x100000(ubi)'

current mtdparts looks similarly:

mtdparts=mtdparts=orion_nand:1m(uboot),-(data)

Regards, alex
Re: Debian on TBS2921 MOI+
December 14, 2024 02:41PM
Alex,

Please create a new thread "OpenWrt on TBS MOI+" in the Rescue System sub-forum.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: