Debian on Synology DS211
Posted by Ivanj
|
Re: Debian on Synology DS211 November 19, 2024 05:57PM |
Admin Registered: 13 years ago Posts: 19,102 |
> Yes, of course, in all previous examples I have
> removed the USB, since I wanted to boot from the
> SATA connected HDD only and not use USB at all.
Cool!
> Only at the end I have used the USB to boot and
> test whether the 12TB HDD will work.
> I assume that USB will be slower to run the OS
> from, so I wanted to use the much faster SATA.and
> a HDD.
Yes, indeed. If you have SATA, always best to have the rootfs on it. And the 12TB disk should work in u-boot. We just don't have the correct regulator, I think.
This log seems truncated, there is nothing on it:
upper_sata1_1TBHDD.txt (1 byte)
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> removed the USB, since I wanted to boot from the
> SATA connected HDD only and not use USB at all.
Cool!
> Only at the end I have used the USB to boot and
> test whether the 12TB HDD will work.
> I assume that USB will be slower to run the OS
> from, so I wanted to use the much faster SATA.and
> a HDD.
Yes, indeed. If you have SATA, always best to have the rootfs on it. And the 12TB disk should work in u-boot. We just don't have the correct regulator, I think.
This log seems truncated, there is nothing on it:
upper_sata1_1TBHDD.txt (1 byte)
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Debian on Synology DS211 November 20, 2024 03:02PM |
Admin Registered: 13 years ago Posts: 19,102 |
Ivanj,
bodhi Wrote:
-------------------------------------------------------
> > Yes, of course, in all previous examples I have
> > removed the USB, since I wanted to boot from
> the
> > SATA connected HDD only and not use USB at all.
>
> Cool!
>
> > Only at the end I have used the USB to boot and
> > test whether the 12TB HDD will work.
> > I assume that USB will be slower to run the OS
> > from, so I wanted to use the much faster
> SATA.and
> > a HDD.
>
> Yes, indeed. If you have SATA, always best to have
> the rootfs on it. And the 12TB disk should work in
> u-boot. We just don't have the correct regulator,
> I think.
>
> This log seems truncated, there is nothing on it:
>
> upper_sata1_1TBHDD.txt (1 byte)
Here is the update DTB. Please copy to your USB rootfs /boot/dts/ and try booting USB rootfs and with 2 data HDDs in the slots. See if both HDDs will be enumerated in Debian.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 11/20/2024 03:26PM by bodhi.
bodhi Wrote:
-------------------------------------------------------
> > Yes, of course, in all previous examples I have
> > removed the USB, since I wanted to boot from
> the
> > SATA connected HDD only and not use USB at all.
>
> Cool!
>
> > Only at the end I have used the USB to boot and
> > test whether the 12TB HDD will work.
> > I assume that USB will be slower to run the OS
> > from, so I wanted to use the much faster
> SATA.and
> > a HDD.
>
> Yes, indeed. If you have SATA, always best to have
> the rootfs on it. And the 12TB disk should work in
> u-boot. We just don't have the correct regulator,
> I think.
>
> This log seems truncated, there is nothing on it:
>
> upper_sata1_1TBHDD.txt (1 byte)
Here is the update DTB. Please copy to your USB rootfs /boot/dts/ and try booting USB rootfs and with 2 data HDDs in the slots. See if both HDDs will be enumerated in Debian.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 11/20/2024 03:26PM by bodhi.
|
Re: Debian on Synology DS211 November 20, 2024 04:01PM |
Registered: 4 weeks ago Posts: 27 |
Bodhi,
With the new dtb file both SATA slots are working and recognize the drives!
The next step is a new uBoot?
With the new dtb file both SATA slots are working and recognize the drives!
[ 638.325500] ata2: link is slow to respond, please be patient (ready=0) [ 642.385518] ata2: SRST failed (errno=-16) [ 648.365503] ata2: link is slow to respond, please be patient (ready=0) [ 649.835513] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 649.844839] ata2.00: supports DRM functions and may not be fully accessible [ 649.852573] ata2.00: ATA-10: ST12000NM0127, G006, max UDMA/133 [ 649.860574] ata2.00: 23437770752 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 649.902322] ata2.00: Features: Trust [ 649.911162] ata2.00: supports DRM functions and may not be fully accessible [ 649.922670] ata2.00: configured for UDMA/133 [ 649.929053] scsi 1:0:0:0: Direct-Access ATA ST12000NM0127 G006 PQ: 0 ANSI: 5 [ 649.950875] sd 1:0:0:0: [sdb] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB) [ 649.965619] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 649.973779] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 649.986057] sd 1:0:0:0: [sdb] Write Protect is off [ 649.991618] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 649.991700] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 650.024126] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 650.148809] sdb: sdb1 [ 650.152362] sd 1:0:0:0: [sdb] Attached SCSI disk [ 665.305516] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 665.317090] ata1.00: ATA-8: APPLE HDD HTS541010A9E632, JA0AB5N0, max UDMA/133 [ 665.324981] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 665.338560] ata1.00: configured for UDMA/133 [ 665.344002] scsi 0:0:0:0: Direct-Access ATA APPLE HDD HTS541 B5N0 PQ: 0 ANSI: 5 [ 665.366373] sd 0:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 665.374792] sd 0:0:0:0: [sdc] 4096-byte physical blocks [ 665.381177] sd 0:0:0:0: Attached scsi generic sg2 type 0 [ 665.401146] sd 0:0:0:0: [sdc] Write Protect is off [ 665.413484] sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 665.413619] sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 665.435708] sd 0:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 665.535090] sdc: sdc1 [ 665.538693] sd 0:0:0:0: [sdc] Attached SCSI disk
The next step is a new uBoot?
|
Re: Debian on Synology DS211 November 20, 2024 05:11PM |
Admin Registered: 13 years ago Posts: 19,102 |
Ivanj,
> With the new dtb file both SATA slots are working
> and recognize the drives!
>
> The next step is a new uBoot?
Nice!
Yes, I'll build another u-boot version.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> With the new dtb file both SATA slots are working
> and recognize the drives!
>
> [ 638.325500] ata2: link is slow to respond, > please be patient (ready=0) > [ 642.385518] ata2: SRST failed (errno=-16) > [ 648.365503] ata2: link is slow to respond, > please be patient (ready=0) > [ 649.835513] ata2: SATA link up 3.0 Gbps > (SStatus 123 SControl F300) > [ 649.844839] ata2.00: supports DRM functions and > may not be fully accessible > [ 649.852573] ata2.00: ATA-10: ST12000NM0127, > G006, max UDMA/133 > [ 649.860574] ata2.00: 23437770752 sectors, multi > 0: LBA48 NCQ (depth 31/32) > [ 649.902322] ata2.00: Features: Trust > [ 649.911162] ata2.00: supports DRM functions and > may not be fully accessible > [ 649.922670] ata2.00: configured for UDMA/133 > [ 649.929053] scsi 1:0:0:0: Direct-Access ATA > ST12000NM0127 G006 PQ: 0 ANSI: 5 > [ 649.950875] sd 1:0:0:0: [sdb] 23437770752 > 512-byte logical blocks: (12.0 TB/10.9 TiB) > [ 649.965619] sd 1:0:0:0: Attached scsi generic > sg1 type 0 > [ 649.973779] sd 1:0:0:0: [sdb] 4096-byte > physical blocks > [ 649.986057] sd 1:0:0:0: [sdb] Write Protect is > off > [ 649.991618] sd 1:0:0:0: [sdb] Mode Sense: 00 3a > 00 00 > [ 649.991700] sd 1:0:0:0: [sdb] Write cache: > enabled, read cache: enabled, doesn't support DPO > or FUA > [ 650.024126] sd 1:0:0:0: [sdb] Preferred minimum > I/O size 4096 bytes > [ 650.148809] sdb: sdb1 > [ 650.152362] sd 1:0:0:0: [sdb] Attached SCSI > disk > [ 665.305516] ata1: SATA link up 3.0 Gbps > (SStatus 123 SControl F300) > [ 665.317090] ata1.00: ATA-8: APPLE HDD > HTS541010A9E632, JA0AB5N0, max UDMA/133 > [ 665.324981] ata1.00: 1953525168 sectors, multi > 16: LBA48 NCQ (depth 31/32) > [ 665.338560] ata1.00: configured for UDMA/133 > [ 665.344002] scsi 0:0:0:0: Direct-Access ATA > APPLE HDD HTS541 B5N0 PQ: 0 ANSI: 5 > [ 665.366373] sd 0:0:0:0: [sdc] 1953525168 > 512-byte logical blocks: (1.00 TB/932 GiB) > [ 665.374792] sd 0:0:0:0: [sdc] 4096-byte > physical blocks > [ 665.381177] sd 0:0:0:0: Attached scsi generic > sg2 type 0 > [ 665.401146] sd 0:0:0:0: [sdc] Write Protect is > off > [ 665.413484] sd 0:0:0:0: [sdc] Mode Sense: 00 3a > 00 00 > [ 665.413619] sd 0:0:0:0: [sdc] Write cache: > enabled, read cache: enabled, doesn't support DPO > or FUA > [ 665.435708] sd 0:0:0:0: [sdc] Preferred minimum > I/O size 4096 bytes > [ 665.535090] sdc: sdc1 > [ 665.538693] sd 0:0:0:0: [sdc] Attached SCSI > disk >>
> The next step is a new uBoot?
Nice!
Yes, I'll build another u-boot version.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Debian on Synology DS211 November 20, 2024 10:28PM |
Admin Registered: 13 years ago Posts: 19,102 |
New u-boot was uploaded:
https://forum.doozan.com/read.php?3,138456,138496#msg-138496
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
https://forum.doozan.com/read.php?3,138456,138496#msg-138496
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
