|
Re: Debian on Promwad-Thinclient April 18, 2025 01:39PM |
Admin Registered: 14 years ago Posts: 20,027 |
MM,
> name pins functions
> ================================================================================
> mpp7 7 gpo, spi(cs), lcd(pwm)
>
>
> need change gpio to gpo in DTS?
Yes indeed.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> name pins functions
> ================================================================================
> mpp7 7 gpo, spi(cs), lcd(pwm)
>
>
> need change gpio to gpo in DTS?
Yes indeed.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Debian on Promwad-Thinclient April 18, 2025 03:34PM |
Admin Registered: 14 years ago Posts: 20,027 |
MM,
I've changed:
- The DTS for kirkwood-promwad-thin-client.dtb to use GPO for both 7 and 17. See it it will take 17 this way.
- Move the USB hub back to i2c0. See if it will fix the error we saw previously in Anonymous's log.
This tarball kirkwood-promwad.dt.250418.tar contains 4 files
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
I've changed:
- The DTS for kirkwood-promwad-thin-client.dtb to use GPO for both 7 and 17. See it it will take 17 this way.
- Move the USB hub back to i2c0. See if it will fix the error we saw previously in Anonymous's log.
This tarball kirkwood-promwad.dt.250418.tar contains 4 files
kirkwood-promwad-thin-client.dtb kirkwood-promwad-thin-client.dts kirkwood-promwad-wtplug.dtb kirkwood-promwad-wtplug.dts
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Anonymous
Re: Debian on Promwad-Thinclient April 23, 2025 11:09AM |
Yes, that one.Quote
bodhi
Are you using Debian-6.5.7-kirkwood-tld-1-rootfs-bodhi.tar.bz2 or using your own rootfs from somewhere else?
I had erroneous /etc/network/interfaces since with dhcp it was taking ages to boot without dhcp server. Now it is fixed.Quote
And the network also has problem.
I had to download onto USB flash and install libpci3, pci.ids, pciutils, libusb, usbutils with dpkg -i using armel packages. I didn't install dts compiler since you provided a dtb file. I guess I can't use armhf?Quote
Install the tools:
Here is the new log, with fixed network settings and new dtb (see uImage built on newer date, while initrd is old). Bad blocks, serial numbers, mac addresses censored:
U-Boot 2011.06 (Nov 15 2012 - 14:51:21)
Promwad-ThinClient
SoC: Kirkwood 88F6282_?? RevID 0x01
DRAM: 1 GiB
NAND: 1024 MiB
In: serial
Out: serial
Err: serial
Net: egiga0, egiga1
88E1121 Initialized on egiga0, devadr 1
88E1121 Initialized on egiga1, devadr 0
Hit any key to stop autoboot: 3 0
Marvell>> run usb_boot
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Loading file "/boot/uImage" from usb device 0:2 (usbda2)
6011569 bytes read
Loading file "/boot/uInitrd" from usb device 0:2 (usbda2)
5834091 bytes read
## Booting kernel from Legacy Image at 01100000 ...
Image Name: Linux-6.13.8-kirkwood-tld-1
Created: 2025-04-23 2:34:13 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 6011505 Bytes = 5.7 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 02200000 ...
Image Name: initramfs-6.13.8-kirkwood-tld-1
Created: 2025-04-17 6:27:05 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 5834027 Bytes = 5.6 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 6.13.8-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 PREEMPT Mon Mar 24 14:30:26 PDT 2025
[ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Promwad WTPlug Thin Client
[ 0.000000][ T0] printk: legacy bootconsole [earlycon0] enabled
[ 0.000000][ T0] Memory policy: Data cache writeback
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000][ T0] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000][ T0] Kernel command line: root=/dev/sda2 rootdelay=10 earlyprintk=serial console=ttyS0,115200
[ 0.000000][ T0] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes
[ 0.000000][ T0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 262144
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000][ T0] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
[ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[ 0.000000][ T0] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000001][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.008619][ T0] Switching to timer-based delay loop, resolution 5ns
[ 0.015873][ T0] Console: colour dummy device 80x30
[ 0.021127][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[ 0.032422][ T0] CPU: Testing write buffer coherency: ok
[ 0.038109][ T0] pid_max: default: 32768 minimum: 301
[ 0.049696][ T0] LSM: initializing lsm=capability
[ 0.056396][ T0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.064472][ T0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.099044][ T1] Setting up static identity map for 0x100000 - 0x100058
[ 0.106191][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.112363][ T1] rcu: Hierarchical SRCU implementation.
[ 0.117880][ T1] rcu: Max phase no-delay instances is 1000.
[ 0.124993][ T1] Memory: 1009104K/1048576K available (11264K kernel code, 1639K rwdata, 5400K rodata, 1024K init, 451K bss, 36448K reserved, 0K cma-reserved)
[ 0.140884][ T1] devtmpfs: initialized
[ 0.150527][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.161161][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.174188][ T1] prandom: seed boundary self test passed
[ 0.183007][ T1] prandom: 100 self tests passed
[ 0.187824][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.196616][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.204484][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.212976][ T1] audit: initializing netlink subsys (disabled)
[ 0.219514][ T23] audit: type=2000 audit(0.200:1): state=initialized audit_enabled=0 res=1
[ 0.228972][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.229080][ T1] cpuidle: using governor ladder
[ 0.240674][ T1] cpuidle: using governor menu
[ 0.245745][ T1] [Firmware Bug]: Feroceon L2: bootloader left the L2 cache on!
[ 0.253306][ T1] Feroceon L2: Cache support initialised.
[ 0.262631][ T1] /ocp@f1000000/pin-controller@10000: Fixed dependency cycle(s) with /ocp@f1000000/pin-controller@10000/pmx-usb-power-enable
[ 0.280752][ T1] No ATAGs?
[ 0.658638][ T1] raid6: int32x8 gen() 151 MB/s
[ 0.998634][ T1] raid6: int32x4 gen() 139 MB/s
[ 1.338637][ T1] raid6: int32x2 gen() 180 MB/s
[ 1.678633][ T1] raid6: int32x1 gen() 129 MB/s
[ 1.683635][ T1] raid6: using algorithm int32x2 gen() 180 MB/s
[ 2.038635][ T1] raid6: .... xor() 115 MB/s, rmw enabled
[ 2.044242][ T1] raid6: using intx1 recovery algorithm
[ 2.070119][ T1] SCSI subsystem initialized
[ 2.075337][ T1] usbcore: registered new interface driver usbfs
[ 2.088733][ T1] usbcore: registered new interface driver hub
[ 2.094827][ T1] usbcore: registered new device driver usb
[ 2.119000][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 2.124693][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.148667][ T1] PTP clock support registered
[ 2.155845][ T1] vgaarb: loaded
[ 2.169301][ T1] clocksource: Switched to clocksource orion_clocksource
[ 2.185858][ T1] VFS: Disk quotas dquot_6.6.0
[ 2.209662][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.218329][ T1] netfs: FS-Cache loaded
[ 2.262752][ T1] NET: Registered PF_INET protocol family
[ 2.268717][ T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 2.292431][ T1] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 2.309645][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 2.318948][ T1] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 2.349459][ T1] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 2.358296][ T1] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.379875][ T1] MPTCP token hash table entries: 1024 (order: 1, 12288 bytes, linear)
[ 2.388225][ T1] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 2.419380][ T1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 2.428013][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 2.450402][ T1] RPC: Registered named UNIX socket transport module.
[ 2.457065][ T1] RPC: Registered udp transport module.
[ 2.479317][ T1] RPC: Registered tcp transport module.
[ 2.484750][ T1] RPC: Registered tcp-with-tls transport module.
[ 2.499316][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.506504][ T1] PCI: CLS 0 bytes, default 32
[ 2.521763][ T12] Trying to unpack rootfs image as initramfs...
[ 3.305417][ T12] Freeing initrd memory: 5700K
[ 3.465926][ T1] Initialise system trusted keyrings
[ 3.471293][ T1] Key type blacklist registered
[ 3.476416][ T1] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 3.483736][ T1] zbud: loaded
[ 3.498824][ T1] NFS: Registering the id_resolver key type
[ 3.504700][ T1] Key type id_resolver registered
[ 3.509624][ T1] Key type id_legacy registered
[ 3.514504][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.521972][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 3.531129][ T1] fuse: init (API version 7.41)
[ 3.744451][ T1] xor: measuring software checksum speed
[ 3.752234][ T1] arm4regs : 1469 MB/sec
[ 3.761024][ T1] 8regs : 883 MB/sec
[ 3.768704][ T1] 32regs : 1261 MB/sec
[ 3.773800][ T1] xor: using function: arm4regs (1469 MB/sec)
[ 3.779769][ T1] async_tx: api initialized (async)
[ 3.784858][ T1] Key type asymmetric registered
[ 3.789690][ T1] Asymmetric key parser 'x509' registered
[ 3.837753][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 3.846463][ T1] io scheduler bfq registered
[ 3.993936][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 4.003562][ T1] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 4.014585][ T1] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 4.025109][ T1] kirkwood-pinctrl f1010000.pin-controller: unsupported function gpo on pin mpp17
[ 4.034305][ T1] pinctrl core: failed to register map default (1): invalid type given
[ 4.042581][ T1] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.049573][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f1000000/pcie@82000000 ranges:
[ 4.059547][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 4.069735][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 4.079922][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 4.090146][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 4.100853][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 4.111558][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 4.122255][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 4.133764][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 4.142186][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 4.148418][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 4.159411][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 4.170371][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 4.181366][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 4.188980][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 4.196120][ T1] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400 PCIe Root Port
[ 4.204212][ T1] pci 0000:00:01.0: PCI bridge to [bus 00]
[ 4.209930][ T1] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff]
[ 4.216763][ T1] pci 0000:00:01.0: bridge window [mem 0x00000000-0x000fffff]
[ 4.224801][ T1] /mbus@f1000000/pcie@82000000/pcie@1,0: Fixed dependency cycle(s) with /mbus@f1000000/pcie@82000000/pcie@1,0/interrupt-controller
[ 4.238281][ T1] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400 PCIe Root Port
[ 4.246370][ T1] pci 0000:00:02.0: PCI bridge to [bus 00]
[ 4.252090][ T1] pci 0000:00:02.0: bridge window [io 0x0000-0x0fff]
[ 4.258915][ T1] pci 0000:00:02.0: bridge window [mem 0x00000000-0x000fffff]
[ 4.266961][ T1] /mbus@f1000000/pcie@82000000/pcie@2,0: Fixed dependency cycle(s) with /mbus@f1000000/pcie@82000000/pcie@2,0/interrupt-controller
[ 4.281122][ T1] PCI: bus0: Fast back to back transfers disabled
[ 4.287447][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.296240][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.305233][ T1] PCI: bus1: Fast back to back transfers enabled
[ 4.311483][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 4.319054][ T1] PCI: bus2: Fast back to back transfers enabled
[ 4.325303][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 4.332705][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 4.338407][ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 4.344126][ T1] pci_bus 0000:00: resource 4 [mem 0xf1040000-0xf1041fff]
[ 4.351145][ T1] pci_bus 0000:00: resource 5 [mem 0xf1044000-0xf1045fff]
[ 4.358147][ T1] pci_bus 0000:00: resource 6 [mem 0xf1080000-0xf1081fff]
[ 4.365169][ T1] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xefffffff]
[ 4.372185][ T1] pci_bus 0000:00: resource 8 [io 0x1000-0xeffff]
[ 4.380125][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 4.430788][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 4.442556][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 4.490787][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 4.502938][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 4.512316][ T1] printk: legacy console [ttyS0] disabled
[ 4.518547][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 29, base_baud = 12500000) is a 16550A
[ 4.528405][ T1] printk: legacy console [ttyS0] enabled
[ 4.528405][ T1] printk: legacy console [ttyS0] enabled
[ 4.539538][ T1] printk: legacy bootconsole [earlycon0] disabled
[ 4.539538][ T1] printk: legacy bootconsole [earlycon0] disabled
[ 4.579936][ T1] loop: module loaded
[ 4.584568][ T1] sata_mv f1080000.sata: slots 32 ports 1
[ 4.592657][ T1] scsi host0: sata_mv
[ 4.597379][ T1] ata1: SATA max UDMA/133 irq 30 lpm-pol 0
[ 4.604349][ T1] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd3
[ 4.611579][ T1] nand: Samsung NAND 1GiB 3,3V 8-bit
[ 4.616748][ T1] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 4.625223][ T1] Scanning device for bad blocks
[ 4.634550][ T1] Bad eraseblock xx at 0x000000yy0000
[ 4.923043][ T55] ata1: SATA link down (SStatus 0 SControl F300)
[ 5.338320][ T1] 6 fixed-partitions partitions found on MTD device orion_nand
[ 5.345775][ T1] Creating 6 MTD partitions on "orion_nand":
[ 5.351665][ T1] 0x000000000000-0x0000001c0000 : "uboot"
[ 5.358091][ T1] 0x0000001c0000-0x000000480000 : "env"
[ 5.364182][ T1] 0x000000480000-0x0000005e0000 : "test"
[ 5.370331][ T1] 0x0000005e0000-0x000000b20000 : "conf"
[ 5.376526][ T1] 0x000000b20000-0x000004860000 : "linux"
[ 5.383055][ T1] 0x000004860000-0x000010000000 : "user"
[ 5.390922][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 5.399585][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 5.431965][ T1] hwmon hwmon0: temp1_input not attached to any thermal zone
[ 5.457714][ T1] hwmon hwmon1: temp1_input not attached to any thermal zone
[ 5.466197][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 5.540805][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address xx:xx:xx:xx:xx:xx
[ 5.620793][ T1] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address xx:xx:xx:xx:xx:xy
[ 5.630852][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
[ 5.637132][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 5.645862][ T1] orion-ehci f1050000.ehci: irq 34, io mem 0xf1050000
[ 5.669333][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 5.676428][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
[ 5.685475][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.693459][ T1] usb usb1: Product: EHCI Host Controller
[ 5.699066][ T1] usb usb1: Manufacturer: Linux 6.13.8-kirkwood-tld-1 ehci_hcd
[ 5.706524][ T1] usb usb1: SerialNumber: f1050000.ehci
[ 5.712881][ T1] hub 1-0:1.0: USB hub found
[ 5.717435][ T1] hub 1-0:1.0: 1 port detected
[ 5.723047][ T1] usbcore: registered new interface driver usb-storage
[ 5.730623][ T1] rtc-mv f1010300.rtc: is a wakeup source
[ 5.736845][ T1] rtc-mv f1010300.rtc: registered as rtc0
[ 5.742537][ T1] rtc-mv f1010300.rtc: setting system clock to 2025-04-23T02:35:36 UTC (1745375736)
[ 5.752220][ T1] i2c_dev: i2c /dev entries driver
[ 5.759864][ T1] device-mapper: uevent: version 1.0.3
[ 5.765790][ T1] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 5.776161][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 5.783544][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 5.790923][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
[ 5.798424][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 5.806014][ T1] sdhci: Secure Digital Host Controller Interface driver
[ 5.812971][ T1] sdhci: Copyright(c) Pierre Ossman
[ 5.818284][ T1] hid: raw HID events driver (C) Jiri Kosina
[ 5.824644][ T1] drop_monitor: Initializing network drop monitor service
[ 5.833095][ T1] NET: Registered PF_INET6 protocol family
[ 5.841330][ T1] Segment Routing with IPv6
[ 5.845728][ T1] RPL Segment Routing with IPv6
[ 5.850598][ T1] In-situ OAM (IOAM) with IPv6
[ 5.855338][ T1] NET: Registered PF_PACKET protocol family
[ 5.861864][ T1] Key type dns_resolver registered
[ 5.883382][ T1] registered taskstats version 1
[ 5.888367][ T1] Loading compiled-in X.509 certificates
[ 5.922394][ T1] Key type .fscrypt registered
[ 5.927071][ T1] Key type fscrypt-provisioning registered
[ 5.938530][ T1] Key type big_key registered
[ 5.989517][ T9] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 6.129121][ T1] Key type encrypted registered
[ 6.180143][ T1] clk: Disabling unused clocks
[ 6.188134][ T1] Freeing unused kernel image (initmem) memory: 1024K
[ 6.195271][ T9] usb 1-1: New USB device found, idVendor=0000, idProduct=0000, bcdDevice= 0.00
[ 6.204924][ T106] "cryptomgr_test" (106) uses obsolete ecb(arc4) skcipher
[ 6.251779][ T9] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.260706][ T1] Checked W+X mappings: passed, no W+X pages found
[ 6.267117][ T1] Run /init as init process
[ 6.295141][ T9] hub 1-1:1.0: USB hub found
[ 6.335055][ T9] hub 1-1:1.0: 7 ports detected
[ 6.370132][ T9] hub 1-1:1.0: insufficient power available to use all downstream ports
Loading, please wait...
Starting systemd-udevd version 252.17-1~deb12u1
[ 7.669376][ T9] usb 1-1.6: new high-speed USB device number 3 using orion-ehci
[ 7.852016][ T9] usb 1-1.6: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[ 7.890504][ T9] usb 1-1.6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 7.898575][ T9] usb 1-1.6: Product: USB3.1 PSSD HS-M2
[ 7.945586][ T9] usb 1-1.6: Manufacturer: SONIZOON
[ 7.981450][ T9] usb 1-1.6: SerialNumber: xxx
[ 8.229633][ T154] scsi host1: uas
[ 8.236601][ T22] scsi 1:0:0:0: Direct-Access SONIZOON USB3.1 PSSD HS-M 0 PQ: 0 ANSI: 6
[ 8.245805][ T154] usbcore: registered new interface driver uas
[ 8.299922][ T33] sd 1:0:0:0: [sda] 61865984 512-byte logical blocks: (31.7 GB/29.5 GiB)
[ 8.339354][ T33] sd 1:0:0:0: [sda] Write Protect is off
[ 8.379365][ T33] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.409347][ T33] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 8.416268][ T33] sd 1:0:0:0: [sda] Optimal transfer size 33553920 bytes
[ 8.527753][ T33] sda: sda1 sda2 sda3 sda4
[ 8.560409][ T33] sd 1:0:0:0: [sda] Attached SCSI disk
[ 9.307221][ T9] usb 1-1: USB disconnect, device number 2
[ 9.315306][ T157] sd 1:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=0s
[ 9.325824][ T157] sd 1:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 03 af ff 80 00 00 08 00
[ 9.333957][ T157] I/O error, dev sda, sector 61865856 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 9.343874][ T33] usb251xb 0-002c: configuring block 0 failed: -6
[ 9.359336][ T9] usb 1-1.6: USB disconnect, device number 3
[ 9.365670][ T33] usb251xb 0-002c: Failed to connect hub (-6)
[ 9.619589][ T9] sd 1:0:0:0: [sda] Synchronizing SCSI cache
Begin: Loading essential drivers ... done.
[ 10.419415][ T9] sd 1:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 10.749341][ T9] usb 1-1: new high-speed USB device number 4 using orion-ehci
[ 10.919881][ T9] usb 1-1: New USB device found, idVendor=0000, idProduct=0000, bcdDevice= 0.00
[ 10.928823][ T9] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.938428][ T9] hub 1-1:1.0: USB hub found
[ 10.944508][ T9] hub 1-1:1.0: 7 ports detected
[ 10.949406][ T9] hub 1-1:1.0: insufficient power available to use all downstream ports
[ 12.209336][ T9] usb 1-1.6: new high-speed USB device number 5 using orion-ehci
[ 12.371875][ T9] usb 1-1.6: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[ 12.381022][ T9] usb 1-1.6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 12.389081][ T9] usb 1-1.6: Product: USB3.1 PSSD HS-M2
[ 12.394544][ T9] usb 1-1.6: Manufacturer: SONIZOON
[ 12.399645][ T9] usb 1-1.6: SerialNumber: xxx
[ 12.409210][ T9] scsi host1: uas
[ 12.421066][ T22] scsi 1:0:0:0: Direct-Access SONIZOON USB3.1 PSSD HS-M 0 PQ: 0 ANSI: 6
[ 12.449787][ T33] sd 1:0:0:0: [sda] 61865984 512-byte logical blocks: (31.7 GB/29.5 GiB)
[ 12.465368][ T33] sd 1:0:0:0: [sda] Write Protect is off
[ 12.471890][ T33] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.482026][ T33] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 12.488981][ T33] sd 1:0:0:0: [sda] Optimal transfer size 33553920 bytes
[ 12.530536][ T33] sda: sda1 sda2 sda3 sda4
[ 12.536255][ T33] sd 1:0:0:0: [sda] Attached SCSI disk
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.38.1
[/sbin/fsck.ext3 (1) -- /dev/sda2] fsck.ext3 -a -C0 /dev/sda2
/dev/sda2: clean, 30505/65536 files, 253235/262144 blocks
done.
[ 20.050086][ T186] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[ 20.083975][ T186] EXT4-fs (sda2): mounted filesystem fcc1cbb4-a3c7-4f45-955e-65feb474513d ro with ordered data mode. Quota mode: none.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 3.06 booting
INIT: No inittab.d directory found
Using makefile-style concurrent boot in runlevel S.
Setting hostname to 'debian'...done.
Starting hotplug events dispatcher: systemd-udevd.
Synthesizing the initial hotplug events (subsystems)...done.
Synthesizing the initial hotplug events (devices)...done.
Waiting for /dev to be fully populated...[ 23.509022][ T373] orion_wdt: Initial timeout 21 sec
[ 23.663171][ T369] marvell-cesa f1030000.crypto: CESA device successfully registered
[ 24.039810][ T372] sd 1:0:0:0: Attached scsi generic sg0 type 0
done.
Activating swap:.
[ 25.630595][ T532] EXT4-fs (sda2): re-mounted fcc1cbb4-a3c7-4f45-955e-65feb474513d r/w. Quota mode: none.
Will now check all file systems.
Checking all file systems.
LABEL=rootfs is not mounted
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -y -C0 /dev/sda3
e2fsck 1.47.0 (5-Feb-2023)
rootfs: clean, 83303/130816 files, 427693/524288 blocks
Done checking file systems.
Log is being saved in /var/log/fsck/checkfs if that location is writable.
Cleaning up temporary files...Cleaning /tmp...done.
/tmp.
[ 26.899404][ C0] random: crng init done
Will now mount local filesystems:.
Will now activate swapfile swap, if any:done.
Checking minimum space in /tmp...done.
Cleaning up temporary files....
Starting Setting kernel variables: sysctl.
Initializing random number generator...done.
Configuring network interfaces...done.
Starting RPC port mapper daemon: rpcbind.
Starting NFS common utilities: statd idmapd.
Cleaning up temporary files....
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Not starting NFS kernel daemon: no exports ... (warning).
Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1028 (syslogd)
.
Starting system message bus: dbus.
Starting NTP server: ntpd2025-04-22T19:36:00 ntpd[1070]: INIT: ntpd ntpsec-1.2.2: Starting
2025-04-22T19:36:00 ntpd[1070]: INIT: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:106
.
Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Starting NTP server: ntpd.
Starting OpenBSD Secure Shell server: sshd.
Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1053 (klogd)
.
Running local boot scripts (/etc/rc.local)
.
Debian GNU/Linux 12 debian ttyS0
debian login: root
Password:
Linux debian 6.13.8-kirkwood-tld-1 #1 PREEMPT Mon Mar 24 14:30:26 PDT 2025 armv5tel
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Tue Apr 22 19:18:49 PDT 2025 on ttyS0
debian
192.168.0.100
Promwad WTPlug Thin Client
Linux version 6.13.8-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 PREEMPT Mon Mar 24 14:30:26 PDT 2025
Debian 12.2
Tue Apr 22 19:36:08 PDT 2025 up 0 minutes
root@debian:~# lsusb
Bus 001 Device 005: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Bus 001 Device 004: ID 0000:0000
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@debian:~# lspci
00:01.0 PCI bridge: Marvell Technology Group Ltd. Device 6282 (rev 01)
00:02.0 PCI bridge: Marvell Technology Group Ltd. Device 6282 (rev 01)
root@debian:~# lsusb -v
Bus 001 Device 005: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x174c ASMedia Technology Inc.
idProduct 0x55aa ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
bcdDevice 1.00
iManufacturer 2 SONIZOON
iProduct 3 USB3.1 PSSD HS-M2
iSerial 1 xxx
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0055
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Data-out pipe (0x04)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Command pipe (0x01)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x002a
bNumDeviceCaps 3
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x0000f41e
BESL Link Power Management (LPM) Supported
BESL value 1024 us
Deep BESL value 61440 us
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
SuperSpeedPlus USB Device Capability:
bLength 20
bDescriptorType 16
bDevCapabilityType 10
bmAttributes 0x00000001
Sublink Speed Attribute count 1
Sublink Speed ID count 0
wFunctionalitySupport 0x1100
bmSublinkSpeedAttr[0] 0x000a4030
Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus
bmSublinkSpeedAttr[1] 0x000a40b0
Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus
Device Status: 0x0001
Self Powered
Bus 001 Device 004: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 7
wHubCharacteristic 0x0080
Ganged power switching
Ganged overcurrent protection
TT think time 8 FS bits
Port indicators
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0503 highspeed power enable connect
Port 7: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 6.13
iManufacturer 3 Linux 6.13.8-kirkwood-tld-1 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 f1050000.ehci
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 1
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Device Status: 0x0001
Self Powered
root@debian:~# lspci -v
00:01.0 PCI bridge: Marvell Technology Group Ltd. Device 6282 (rev 01) (prog-if 00 [Normal decode])
Subsystem: Marvell Technology Group Ltd. Device 11ab
Device tree node: /sys/firmware/devicetree/base/mbus@f1000000/pcie@82000000/pcie@1,0
Flags: fast devsel
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: [disabled] [32-bit]
Capabilities: [40] Subsystem: Marvell Technology Group Ltd. Device 11ab
Capabilities: [60] Express Root Port (Slot+), MSI 00
Capabilities: [100] Advanced Error Reporting
00:02.0 PCI bridge: Marvell Technology Group Ltd. Device 6282 (rev 01) (prog-if 00 [Normal decode])
Subsystem: Marvell Technology Group Ltd. Device 11ab
Device tree node: /sys/firmware/devicetree/base/mbus@f1000000/pcie@82000000/pcie@2,0
Flags: fast devsel
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: [disabled] [32-bit]
Capabilities: [40] Subsystem: Marvell Technology Group Ltd. Device 11ab
Capabilities: [60] Express Root Port (Slot+), MSI 00
Capabilities: [100] Advanced Error Reporting
root@debian:~# poweroff
Broadcast message from root@debian (ttyS0) (Tue Apr 22 19:36:30 2025):
The system is going down for system halt NOW!
INIT: Switching to runINIT: No inittab.d directory found
IUsing makefile-style concurrent boot in runlevel 0.
Stopping hotplug events dispatcher: systemd-udevd.
Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Stopping busybox' klogd implementation: klogd1053 (klogd)
Stopped klogd (pid 1053).
.
Saving random seed...done.
Stopping busybox' syslogd implementation: syslogd1028 (syslogd)
.
Stopping NFS kernel daemon: mountd nfsd.
Unexporting directories for NFS kernel daemon...done.
Asking all remaining processes to terminate...done.
All processes ended within 1 seconds...done.
Stopping RPC port mapper daemon: rpcbind.
Stopping NFS common utilities: idmapd statd.
Saving the system clock to /dev/rtc0.
Hardware Clock updated to Tue Apr 22 19:36:31 PDT 2025.
Deconfiguring network interfaces...done.
Will now unmount temporary filesystems:umount: /tmp unmounted
.
Will now deactivate swap:.
[ 60.147882][ T1248] EXT4-fs (sda2): re-mounted fcc1cbb4-a3c7-4f45-955e-65feb474513d ro. Quota mode: none.
Mounting root filesystem read-only...done.
Will now halt.
logger:
socket /dev/log: Connection refused
[ 60.244167][ T1254] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 60.250873][ T1254] reboot: Power off not available: System halted instead
|
Re: Debian on Promwad-Thinclient April 23, 2025 03:09PM |
Admin Registered: 14 years ago Posts: 20,027 |
@Anonymous,
> I guess I can't use armhf?
Not armhf. This SoC is ARMv5TE (i.e armel).
> Here is the new log, with fixed network settings
> and new dtb (see uImage built on newer date, while
> initrd is old).
So you are booting with the new DTB above from kirkwood-promwad.dt.250418.tar.
> Bad blocks serial numbers, mac
> addresses censored
No need to censor the bad blocks. It's useful to see them (if they are in range 0..7, i.e. u-boot area).
> [ 9.343874][ T33] usb251xb 0-002c:
> configuring block 0 failed: -6
> [ 9.359336][ T9] usb 1-1.6: USB disconnect,
> device number 3
> [ 9.365670][ T33] usb251xb 0-002c: Failed to
> connect hub (-6)
It seems I still don't know enough about this USB hub. I think we need to try another DTS version (probaby with more pinctrl properties).
Are you using a SATA enclosure, does it have its own power source?
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> I guess I can't use armhf?
Not armhf. This SoC is ARMv5TE (i.e armel).
> Here is the new log, with fixed network settings
> and new dtb (see uImage built on newer date, while
> initrd is old).
So you are booting with the new DTB above from kirkwood-promwad.dt.250418.tar.
> Bad blocks serial numbers, mac
> addresses censored
No need to censor the bad blocks. It's useful to see them (if they are in range 0..7, i.e. u-boot area).
> [ 9.343874][ T33] usb251xb 0-002c:
> configuring block 0 failed: -6
> [ 9.359336][ T9] usb 1-1.6: USB disconnect,
> device number 3
> [ 9.365670][ T33] usb251xb 0-002c: Failed to
> connect hub (-6)
It seems I still don't know enough about this USB hub. I think we need to try another DTS version (probaby with more pinctrl properties).
> root@debian:~# lsusb -v > Bus 001 Device 005: ID 174c:55aa ASMedia > Technology Inc. ASM1051E SATA 6Gb/s bridge, > ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s > bridge, ASM1153E SATA 6Gb/s bridge
Are you using a SATA enclosure, does it have its own power source?
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Anonymous
Re: Debian on Promwad-Thinclient April 23, 2025 04:03PM |
> ARMv5TE
Well, if it has no hardware floating point co-processor, so be it.
> No need to censor the bad blocks. It's useful to see them (if they are in range 0..7, i.e. u-boot area).
Don't worry, first several megabytes of my NAND chip are good.
> Are you using a SATA enclosure, does it have its own power source?
It is an expensive USB stick, but I guess it pretends to be a SATA enclosure to achieve faster R/W speeds (marketed as Portable SSD)
Well, if it has no hardware floating point co-processor, so be it.
> No need to censor the bad blocks. It's useful to see them (if they are in range 0..7, i.e. u-boot area).
Don't worry, first several megabytes of my NAND chip are good.
> Are you using a SATA enclosure, does it have its own power source?
It is an expensive USB stick, but I guess it pretends to be a SATA enclosure to achieve faster R/W speeds (marketed as Portable SSD)
