WD My Cloud EX2 Ultra not booting after upgrade to Debian Trixie

Hi all, I have upgrade my WD My Cloud EX2 Ultra to Debian Trixie. The upgrade went fine. I rebooted the box and then the blue LED kept blinking, the box did not boot. I connected the serial-USB dongle and found there is a problem with init, that causes a kernel panic. My first thought was to check that /bin/systemd existed. It did not so I made a symlink from /bin/systemd to /usr/lib/systemd/systemd. This did not help, I got the same kernel panic message.
Anyone a suggestion what to do?

[    3.264117][    T1] Waiting 10 sec before mounting root device...
[   13.307556][    T1] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[   13.316572][    T1] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   13.334677][    T1] EXT4-fs (sda1): mounted filesystem 5c96dcf2-3df7-4757-95a5-37b8e661876a ro with ordered data mode. Quota mode: none.
[   13.347103][    T1] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[   13.358726][    T1] devtmpfs: mounted
[   13.364355][    T1] Freeing unused kernel image (initmem) memory: 1024K
[   13.371632][    T1] Checked W+X mappings: passed, no W+X pages found
[   13.378090][    T1] Run /bin/systemd as init process
[   13.389039][    T1] Kernel panic - not syncing: Requested init /bin/systemd failed (error -2).
[   13.397709][    T1] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.5.7-mvebu-tld-1 #1
[   13.405325][    T1] Hardware name: Marvell Armada 380/385 (Device Tree)
[   13.411978][    T1]  unwind_backtrace from show_stack+0x10/0x14
[   13.417949][    T1]  show_stack from dump_stack_lvl+0x40/0x4c
[   13.423735][    T1]  dump_stack_lvl from panic+0x104/0x308
[   13.429258][    T1]  panic from kernel_init+0xa0/0x130
[   13.434430][    T1]  kernel_init from ret_from_fork+0x14/0x28
[   13.440214][    T1] Exception stack(0xf0831fb0 to 0xf0831ff8)
[   13.445994][    T1] 1fa0:                                     00000000 00000000 00000000 00000000
[   13.454916][    T1] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   13.463839][    T1] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   13.471193][    C0] CPU0: stopping
[   13.471198][    C0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.5.7-mvebu-tld-1 #1
[   13.471206][    C0] Hardware name: Marvell Armada 380/385 (Device Tree)
[   13.471210][    C0]  unwind_backtrace from show_stack+0x10/0x14
[   13.471225][    C0]  show_stack from dump_stack_lvl+0x40/0x4c
[   13.471235][    C0]  dump_stack_lvl from do_handle_IPI+0x84/0x11c
[   13.471245][    C0]  do_handle_IPI from ipi_handler+0x14/0x20
[   13.471256][    C0]  ipi_handler from handle_percpu_devid_irq+0x4c/0xe8
[   13.471271][    C0]  handle_percpu_devid_irq from handle_irq_desc+0x1c/0x2c
[   13.471288][    C0]  handle_irq_desc from gic_handle_irq+0x58/0x64
[   13.471302][    C0]  gic_handle_irq from generic_handle_arch_irq+0x28/0x3c
[   13.471310][    C0]  generic_handle_arch_irq from __irq_svc+0x88/0xc8
[   13.471319][    C0] Exception stack(0xc1001f20 to 0xc1001f68)
[   13.471327][    C0] 1f20: 00000000 c0ddbca8 00001ad4 00000001 00000000 00000000 00000000 c100e140
[   13.471334][    C0] 1f40: c100a010 c100a070 c0f42104 0000011f 00000001 c1001f70 c0a73cb0 c0a73cb4
[   13.471338][    C0] 1f60: 20000113 ffffffff
[   13.471342][    C0]  __irq_svc from default_idle_call+0x28/0x2c
[   13.471351][    C0]  default_idle_call from do_idle+0x108/0x280
[   13.471363][    C0]  do_idle from cpu_startup_entry+0x28/0x2c
[   13.471371][    C0]  cpu_startup_entry from rest_init+0xb8/0xd4
[   13.471381][    C0]  rest_init from arch_post_acpi_subsys_init+0x0/0x8
[   13.603889][    T1] ---[ end Kernel panic - not syncing: Requested init /bin/systemd failed (error -2). ]---

Storm,

You did not post the whole dmesg log, so it's hard to tell what's going on.

Also, have you tried booting with sysvinit to see if the same problem occurs?

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

** Edit: Never mind the rest of this post. I fixed the boot issue by making a symlink from /bin/systemd to /sbin/init.**

Thanks for your reply Bodhi. Below is the complete bootlog.

Considering sysvinit, I need to find out how to do that. I am having difficulties interrupting the bootsequence as my keyboard presses are not sent to the device via the serial debug link. I think it has to do with the issue that for the WD My Cloud the 3v3 also needs to be connected to have a reliable transmit line of the UART. It used to work some years ago, now it does not anymore. Anyway, first some soldering and then I will come back to share any progress.

BootROM - 1.73
Booting from NAND flash

General initialization - Version: 1.0.0
Detected Device ID 6820
High speed PHY - Version: 2.0

Load WD GrandTeton Serdes Config:
board SerDes lanes topology details:
 | Lane #  | Speed |  Type       |
 --------------------------------
 |   0    |  06   |  SATA0      |
 |   1    |  05   |  PCIe0      |
 |   2    |  06   |  SATA1      |
 |   3    |  05   |  USB3 HOST1 |
 |   4    |  05   |  USB3 HOST0 |
 |   5    |  00   |  SGMII2     |
 --------------------------------
PCIe, Idx 0: detected no link
High speed PHY - Ended Successfully
DDR3 Training Sequence - Ver TIP-1.26.0
mvSysEnvGetTopologyUpdateInfo: TWSI Read failed
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED

 __   __                      _ _
|  \/  | __ _ _ ____   _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| |  | | (_| | |   \ V /  __/ | |
|_|  |_|\__,_|_|    \_/ \___|_|_|
         _   _     ____              _
        | | | |   | __ )  ___   ___ | |_
        | | | |___|  _ \ / _ \ / _ \| __|
        | |_| |___| |_) | (_) | (_) | |_
         \___/    |____/ \___/ \___/ \__|
 ** LOADER **


U-Boot 2013.01_v1.04 (Jun 29 2022 - 21:23:57) Marvell version: 2014_T3.0p6

mvBoardIdIndexGet(boardId) = 1
Board: GrandTeton DB6820
SoC:   MV88F6820 Rev A0
       running 2 CPUs
CPU:   ARM Cortex A9 MPCore (Rev 1) LE
       CPU 0
       CPU    @ 1332 [MHz]
       L2     @ 666 [MHz]
       TClock @ 200 [MHz]
       DDR    @ 666 [MHz]
       DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled
DRAM:  1 GiB

Map:   Code:                    0x3fece000:0x3ff96320
       BSS:                     0x3ffef65c
       Stack:                   0x3f9cdf20
       Heap:                    0x3f9ce000:0x3fece000
raise: Signal # 8 caught
raise: Signal # 8 caught
       U-Boot Environment:      0x00000000:0x00080000 (NAND)

NAND:  ID: daad ,256 MiB
MMC:   mv_sdh: 0
PCI-e 0: Detected No Link.
USB2.0 0: Host Mode
USB3.0 0: Host Mode
USB3.0 1: Host Mode
Board configuration detected:
Creating 1 MTD partitions on "nand0":
0x00000f500000-0x00000ff00000 : "mtd=7"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=7"
UBI: MTD device size:            10 MiB
UBI: number of good PEBs:        80
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             32
UBI: total number of reserved PEBs: 48
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 4/1
UBIFS: mounted UBI device 0, volume 0, name "reserve2"
UBIFS: mounted read-only
UBIFS: file system size:   4063232 bytes (3968 KiB, 3 MiB, 32 LEBs)
UBIFS: journal size:       1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root:  200807 bytes (196 KiB)
Loading file '/mac_addr' to addr 0x02000000 with size 18 (0x00000012)...
Done
Set lan 2 WakeOnLan ok
Enable HD1
Enable HD2
Net:
|  port  | Interface | PHY address  |
|--------|-----------|--------------|
| egiga0 |   RGMII   |   In-Band    |
| egiga1 |   RGMII   |   In-Band    |
| egiga2 |   SGMII   |     0x00     |
egiga0, egiga1, egiga2 [PRIME]
Hit any key to stop autoboot:  0

Reset SCSI
AHCI init for unit0
Target spinup took 0 ms.
Target spinup took 0 ms.

Error: SCSI Controller(s) 1B4B:9215 1B4B:9235 not found
scanning bus for devices...
  Device 0: (0:0) Vendor: ATA Prod.: Crucial_CT525MX3 Rev: M0C
            Type: Hard Disk
            Capacity: 500786.5 MB = 489.0 GB (1025610768 x 512)
  Device 1: (1:0) Vendor: ATA Prod.: Samsung SSD 870 Rev: SVQ0
            Type: Hard Disk
            Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512)
Found 2 device(s).
5165068 bytes read in 152 ms (32.4 MiB/s)
10169301 bytes read in 222 ms (43.7 MiB/s)
## Booting image at 00500000 ...
## Booting kernel from Legacy Image at 00500000 ...
   Image Name:   Linux-6.5.7-mvebu-tld-1
   Created:      2023-10-27   8:26:36 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    5165004 Bytes = 4.9 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 00a00000 ...
   Image Name:   initramfs-6.5.7-mvebu-tld-1
   Created:      2023-10-27   8:27:02 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    10169237 Bytes = 9.7 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000][    T0] Booting Linux on physical CPU 0x0
[    0.000000][    T0] Linux version 6.5.7-mvebu-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Wed Oct 18 19:13:54 PDT 2023
[    0.000000][    T0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000][    T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000][    T0] OF: fdt: Machine model: WD MyCloud Ex2 Ultra
[    0.000000][    T0] printk: bootconsole [earlycon0] enabled
[    0.000000][    T0] Memory policy: Data cache writealloc
[    0.000000][    T0] INITRD: 0x00a00000+0x009b3000 overlaps in-use memory region
[    0.000000][    T0]  - disabling initrd
[    0.000000][    T0] Zone ranges:
[    0.000000][    T0]   Normal   [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000][    T0]   HighMem  [mem 0x0000000030000000-0x000000003fffffff]
[    0.000000][    T0] Movable zone start for each node
[    0.000000][    T0] Early memory node ranges
[    0.000000][    T0]   node   0: [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000][    T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000][    T0] percpu: Embedded 14 pages/cpu s25364 r8192 d23788 u57344
[    0.000000][    T0] Kernel command line: root=/dev/sda1 console=ttyS0,115200 rootdelay=10 usbcore.autosuspend=-1 mtdparts=armada-nand:5m(u-boot)ro,5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2) earlyprintk=serial raid=noautodetect init=/bin/systemd
[    0.000000][    T0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000][    T0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 260416
[    0.000000][    T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000][    T0] Memory: 1019604K/1048576K available (10240K kernel code, 870K rwdata, 3460K rodata, 1024K init, 464K bss, 28972K reserved, 0K cma-reserved, 262144K highmem)
[    0.000000][    T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000][    T0] rcu: Preemptible hierarchical RCU implementation.
[    0.000000][    T0] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000][    T0]  Trampoline variant of Tasks RCU enabled.
[    0.000000][    T0]  Tracing variant of Tasks RCU enabled.
[    0.000000][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000][    T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000][    T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000][    T0] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000
[    0.000000][    T0] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000][    T0] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000][    T0] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000][    T0] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000][    T0] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000][    T0] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000000][    T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000001][    T0] sched_clock: 64 bits at 666MHz, resolution 1ns, wraps every 4398046511103ns
[    0.008682][    T0] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x999999d70a, max_idle_ns: 440795225152 ns
[    0.020389][    T0] Switching to timer-based delay loop, resolution 1ns
[    0.027201][    T0] Ignoring duplicate/late registration of read_current_timer delay
[    0.034917][    T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.046788][    T0] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.056370][    T0] Console: colour dummy device 80x30
[    0.061525][    T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 1332.00 BogoMIPS (lpj=6660000)
[    0.072802][    T0] CPU: Testing write buffer coherency: ok
[    0.078389][    T0] CPU0: Spectre v2: using BPIALL workaround
[    0.084114][    T0] pid_max: default: 32768 minimum: 301
[    0.092626][    T0] LSM: initializing lsm=capability,integrity
[    0.099326][    T0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.107313][    T0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.119687][    T1] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.126758][    T1] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.134586][    T1] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.142939][    T1] Setting up static identity map for 0x100000 - 0x100060
[    0.149920][    T1] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[    0.155850][    T1] mvebu-pmsu: Initializing Power Management Service Unit
[    0.162843][    T1] rcu: Hierarchical SRCU implementation.
[    0.168328][    T1] rcu:     Max phase no-delay instances is 1000.
[    0.174893][    T1] smp: Bringing up secondary CPUs ...
[    0.180518][    T1] Booting CPU 1
[    0.183986][    T0] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.183997][    T0] CPU1: Spectre v2: using BPIALL workaround
[    0.196151][    T1] smp: Brought up 1 node, 2 CPUs
[    0.200938][    T1] SMP: Total of 2 processors activated (2664.00 BogoMIPS).
[    0.207979][    T1] CPU: All CPU(s) started in SVC mode.
[    0.214138][    T1] devtmpfs: initialized
[    0.222421][    T1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.231079][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.241598][    T1] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.251161][    T1] prandom: seed boundary self test passed
[    0.258317][    T1] prandom: 100 self tests passed
[    0.263091][    T1] pinctrl core: initialized pinctrl subsystem
[    0.270388][    T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.277776][    T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.287605][    T1] audit: initializing netlink subsys (disabled)
[    0.293851][   T26] audit: type=2000 audit(0.250:1): state=initialized audit_enabled=0 res=1
[    0.294270][    T1] thermal_sys: Registered thermal governor 'step_wise'
[    0.302338][    T1] cpuidle: using governor ladder
[    0.313811][    T1] cpuidle: using governor menu
[    0.318622][    T1] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.327301][    T1] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.333960][    T1] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    0.342741][    T1] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    0.352858][    T1] platform soc: Fixed dependency cycle(s) with /soc/internal-regs/interrupt-controller@d000
[    0.537105][    T1] raid6: int32x8  gen()   265 MB/s
[    0.707110][    T1] raid6: int32x4  gen()   277 MB/s
[    0.877078][    T1] raid6: int32x2  gen()   459 MB/s
[    1.047053][    T1] raid6: int32x1  gen()   497 MB/s
[    1.051999][    T1] raid6: using algorithm int32x1 gen() 497 MB/s
[    1.227072][    T1] raid6: .... xor() 181 MB/s, rmw enabled
[    1.232626][    T1] raid6: using intx1 recovery algorithm
[    1.239206][    T1] SCSI subsystem initialized
[    1.243937][    T1] usbcore: registered new interface driver usbfs
[    1.250151][    T1] usbcore: registered new interface driver hub
[    1.256163][    T1] usbcore: registered new device driver usb
[    1.262167][    T1] pps_core: LinuxPPS API ver. 1 registered
[    1.267818][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.277627][    T1] PTP clock support registered
[    1.283638][    T1] vgaarb: loaded
[    1.287479][    T1] clocksource: Switched to clocksource arm_global_timer
[    1.297704][    T1] VFS: Disk quotas dquot_6.6.0
[    1.302473][    T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.317902][    T1] NET: Registered PF_INET protocol family
[    1.323632][    T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.333071][    T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.342222][    T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.350661][    T1] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.359154][    T1] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    1.367177][    T1] TCP: Hash tables configured (established 8192 bind 8192)
[    1.374535][    T1] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    1.382791][    T1] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.390109][    T1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.398168][    T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.404960][    T1] RPC: Registered named UNIX socket transport module.
[    1.411598][    T1] RPC: Registered udp transport module.
[    1.416977][    T1] RPC: Registered tcp transport module.
[    1.422365][    T1] RPC: Registered tcp-with-tls transport module.
[    1.428531][    T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.435648][    T1] PCI: CLS 0 bytes, default 64
[    1.440754][    T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    1.451667][    T1] Initialise system trusted keyrings
[    1.456848][    T1] Key type blacklist registered
[    1.461674][    T1] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    1.468900][    T1] zbud: loaded
[    1.478326][    T1] NFS: Registering the id_resolver key type
[    1.484072][    T1] Key type id_resolver registered
[    1.488954][    T1] Key type id_legacy registered
[    1.493751][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.501138][    T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.593744][    T1] xor: measuring software checksum speed
[    1.603753][    T1]    arm4regs        :  2172 MB/sec
[    1.614691][    T1]    8regs           :  1669 MB/sec
[    1.625405][    T1]    32regs          :  1733 MB/sec
[    1.630444][    T1] xor: using function: arm4regs (2172 MB/sec)
[    1.636347][    T1] async_tx: api initialized (async)
[    1.641389][    T1] Key type asymmetric registered
[    1.646162][    T1] Asymmetric key parser 'x509' registered
[    1.651984][    T1] bounce: pool size: 64 pages
[    1.656777][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.665170][    T1] io scheduler bfq registered
[    1.672506][    T1] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    1.681844][    T1] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.691851][    T1] debugfs: Directory 'f1018100.gpio' with parent 'regmap' already present!
[    1.700936][    T1] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.710869][    T1] debugfs: Directory 'f1018140.gpio' with parent 'regmap' already present!
[    1.721080][    T1] mv_xor f1060800.xor: Marvell shared XOR driver
[    1.798568][    T1] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    1.809200][    T1] mv_xor f1060900.xor: Marvell shared XOR driver
[    1.888540][    T1] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    1.978329][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.989229][    T1] printk: console [ttyS0] disabled
[    2.014985][    T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 39, base_baud = 12500000) is a 16550A
[    2.024698][    T1] printk: console [ttyS0] enabled
[    2.024698][    T1] printk: console [ttyS0] enabled
[    2.034526][    T1] printk: bootconsole [earlycon0] disabled
[    2.034526][    T1] printk: bootconsole [earlycon0] disabled
[    2.099424][    T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 40, base_baud = 12500000) is a 16550A
[    2.111160][    T1] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy regulator
[    2.119697][    T1] ahci-mvebu f10a8000.sata: supply phy not found, using dummy regulator
[    2.128006][    T1] ahci-mvebu f10a8000.sata: supply target not found, using dummy regulator
[    2.136644][    T1] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    2.146471][    T1] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    2.157467][    T1] scsi host0: ahci-mvebu
[    2.162500][    T1] scsi host1: ahci-mvebu
[    2.166961][    T1] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[    2.175667][    T1] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[    2.185637][    T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
[    2.192774][    T1] nand: Hynix H27U2G8F2CTR-BC
[    2.197332][    T1] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    2.205932][    T1] Bad block table found at page 131008, version 0x01
[    2.212852][    T1] Bad block table found at page 130944, version 0x01
[    2.219718][    T1] 8 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[    2.227427][    T1] Creating 8 MTD partitions on "pxa3xx_nand-0":
[    2.233592][    T1] 0x000000000000-0x000000500000 : "U-Boot"
[    2.240440][    T1] 0x000000500000-0x000000a00000 : "uImage"
[    2.247093][    T1] 0x000000a00000-0x000000f00000 : "uRamdisk"
[    2.253966][    T1] 0x000000f00000-0x00000c800000 : "image.cfs"
[    2.261311][    T1] 0x00000c800000-0x00000d700000 : "rescue fw"
[    2.268330][    T1] 0x00000d700000-0x00000eb00000 : "config"
[    2.275066][    T1] 0x00000eb00000-0x00000f500000 : "reserve1"
[    2.281946][    T1] 0x00000f500000-0x00000ff00000 : "reserve2"
[    2.289515][    T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    2.298134][    T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    2.313944][    T1] hwmon hwmon0: temp1_input not attached to any thermal zone
[    2.323006][    T1] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[    2.335277][    T1] mvneta f1034000.ethernet eth0: Using random mac address 46:1d:0f:f9:8e:1d
[    2.344304][    T1] usbcore: registered new interface driver smsc75xx
[    2.351377][    T1] orion-ehci f1058000.usb: EHCI Host Controller
[    2.357569][    T1] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    2.365981][    T1] orion-ehci f1058000.usb: irq 44, io mem 0xf1058000
[    2.397504][    T1] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    2.404344][    T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    2.413386][    T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.421373][    T1] usb usb1: Product: EHCI Host Controller
[    2.426991][    T1] usb usb1: Manufacturer: Linux 6.5.7-mvebu-tld-1 ehci_hcd
[    2.434100][    T1] usb usb1: SerialNumber: f1058000.usb
[    2.440015][    T1] hub 1-0:1.0: USB hub found
[    2.444528][    T1] hub 1-0:1.0: 1 port detected
[    2.450420][    T1] usbcore: registered new interface driver usblp
[    2.456712][    T1] usbcore: registered new interface driver usb-storage
[    2.463797][    T1] mousedev: PS/2 mouse device common for all mice
[    2.471304][    T1] armada38x-rtc f10a3800.rtc: registered as rtc0
[    2.477701][    T1] armada38x-rtc f10a3800.rtc: setting system clock to 2025-10-10T14:08:49 UTC (1760105329)
[    2.488004][    T1] i2c_dev: i2c /dev entries driver
[    2.493237][    T1] mv64xxx_i2c f1011000.i2c: can't get pinctrl, bus recovery not supported
[    2.502131][    T1] mv64xxx_i2c f1011100.i2c: can't get pinctrl, bus recovery not supported
[    2.513561][    T1] orion_wdt: Initial timeout 171 sec
[    2.519407][    T1] device-mapper: uevent: version 1.0.3
[    2.525002][    T1] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    2.534477][    T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[    2.541765][    T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[    2.549159][    T1] device-mapper: multipath service-time: version 0.3.0 loaded
[    2.556570][    T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[    2.563534][    T1] sdhci: Secure Digital Host Controller Interface driver
[    2.570461][    T1] sdhci: Copyright(c) Pierre Ossman
[    2.575657][    T1] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.584295][    T1] marvell-cesa f1090000.crypto: CESA device successfully registered
[    2.592408][    T1] hid: raw HID events driver (C) Jiri Kosina
[    2.598589][    T1] usbcore: registered new interface driver usbhid
[    2.604898][    T1] usbhid: USB HID core driver
[    2.610628][    T1] NET: Registered PF_INET6 protocol family
[    2.617436][    T1] Segment Routing with IPv6
[    2.621850][    T1] RPL Segment Routing with IPv6
[    2.626618][    T1] In-situ OAM (IOAM) with IPv6
[    2.631347][    T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.639105][    T1] NET: Registered PF_PACKET protocol family
[    2.645072][    T1] 8021q: 802.1Q VLAN Support v1.8
[    2.650059][    T1] Key type dns_resolver registered
[    2.655279][    T1] ThumbEE CPU extension supported.
[    2.660326][    T1] Registering SWP/SWPB emulation handler
[    2.677564][  T683] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.684532][  T688] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.702198][  T683] ata1.00: supports DRM functions and may not be fully accessible
[    2.705278][    T1] registered taskstats version 1
[    2.712563][  T683] ata1.00: ATA-10: Crucial_CT525MX300SSD1,  M0CR040, max UDMA/133
[    2.714950][    T1] Loading compiled-in X.509 certificates
[    2.722558][  T683] ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32)
[    2.728136][  T688] ata2.00: supports DRM functions and may not be fully accessible
[    2.728142][  T688] ata2.00: ATA-11: Samsung SSD 870 QVO 2TB, SVQ02B6Q, max UDMA/133
[    2.751472][    T1] Key type .fscrypt registered
[    2.751891][  T688] ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32)
[    2.756124][    T1] Key type fscrypt-provisioning registered
[    2.769321][    T1] Key type big_key registered
[    2.774591][    T1] Key type encrypted registered
[    2.779861][  T683] ata1.00: Features: Trust Dev-Sleep
[    2.785274][  T683] ata1.00: supports DRM functions and may not be fully accessible
[    2.794401][   T12] usb_phy_generic usb3_0_phy: dummy supplies not allowed for exclusive requests
[    2.794532][  T688] ata2.00: Features: Trust Dev-Sleep
[    2.804534][   T12] usb_phy_generic usb3_1_phy: dummy supplies not allowed for exclusive requests
[    2.809077][  T688] ata2.00: supports DRM functions and may not be fully accessible
[    2.817838][   T12] xhci-hcd f10f0000.usb3: xHCI Host Controller
[    2.827087][  T683] ata1.00: configured for UDMA/133
[    2.831285][   T12] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[    2.837162][  T688] ata2.00: configured for UDMA/133
[    2.844652][   T12] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000000010
[    2.849852][   T10] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT525MX3 R040 PQ: 0 ANSI: 5
[    2.859615][   T12] xhci-hcd f10f0000.usb3: irq 45, io mem 0xf10f0000
[    2.869588][   T10] ata1.00: Enabling discard_zeroes_data
[    2.880615][   T36] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 870  2B6Q PQ: 0 ANSI: 5
[    2.881268][   T10] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
[    2.890544][   T12] xhci-hcd f10f0000.usb3: xHCI Host Controller
[    2.898176][  T698] ata2.00: Enabling discard_zeroes_data
[    2.904224][   T12] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
[    2.909932][  T698] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.917593][   T12] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed
[    2.926073][   T10] sd 0:0:0:0: [sda] Write Protect is off
[    2.933237][   T12] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    2.938690][  T698] sd 1:0:0:0: [sdb] Write Protect is off
[    2.947662][   T12] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.947669][   T12] usb usb2: Product: xHCI Host Controller
[    2.947674][   T12] usb usb2: Manufacturer: Linux 6.5.7-mvebu-tld-1 xhci-hcd
[    2.961149][   T12] usb usb2: SerialNumber: f10f0000.usb3
[    2.967921][   T12] hub 2-0:1.0: USB hub found
[    2.979584][   T12] hub 2-0:1.0: 1 port detected
[    2.984079][  T698] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.988934][   T12] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.998511][   T10] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.007350][   T12] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    3.017008][  T698] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[    3.025906][   T12] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.025913][   T12] usb usb3: Product: xHCI Host Controller
[    3.032958][   T10] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.040843][   T12] usb usb3: Manufacturer: Linux 6.5.7-mvebu-tld-1 xhci-hcd
[    3.053910][  T698] ata2.00: Enabling discard_zeroes_data
[    3.060496][   T12] usb usb3: SerialNumber: f10f0000.usb3
[    3.066349][   T10] ata1.00: Enabling discard_zeroes_data
[    3.077143][   T12] hub 3-0:1.0: USB hub found
[    3.077775][   T10]  sda: sda1 sda2 sda3
[    3.081892][   T12] hub 3-0:1.0: 1 port detected
[    3.085613][  T698]  sdb: sdb1
[    3.091105][   T12] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    3.093970][   T10] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    3.100303][   T12] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
[    3.106044][  T698] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    3.114065][   T12] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000000010
[    3.130148][   T12] xhci-hcd f10f8000.usb3: irq 46, io mem 0xf10f8000
[    3.136784][   T12] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    3.142902][   T12] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
[    3.151161][   T12] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[    3.158394][   T12] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    3.167409][   T12] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.175386][   T12] usb usb4: Product: xHCI Host Controller
[    3.181000][   T12] usb usb4: Manufacturer: Linux 6.5.7-mvebu-tld-1 xhci-hcd
[    3.188096][   T12] usb usb4: SerialNumber: f10f8000.usb3
[    3.194107][   T12] hub 4-0:1.0: USB hub found
[    3.198724][   T12] hub 4-0:1.0: 1 port detected
[    3.203714][   T12] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.212655][   T12] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    3.221683][   T12] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.229701][   T12] usb usb5: Product: xHCI Host Controller
[    3.235308][   T12] usb usb5: Manufacturer: Linux 6.5.7-mvebu-tld-1 xhci-hcd
[    3.242409][   T12] usb usb5: SerialNumber: f10f8000.usb3
[    3.248297][   T12] hub 5-0:1.0: USB hub found
[    3.252793][   T12] hub 5-0:1.0: 1 port detected
[    3.258574][    T1] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.266837][    T1] clk: Disabling unused clocks
[    3.271931][    T1] Waiting 10 sec before mounting root device...
[   13.307530][    T1] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[   13.316567][    T1] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   13.334697][    T1] EXT4-fs (sda1): mounted filesystem 5c96dcf2-3df7-4757-95a5-37b8e661876a ro with ordered data mode. Quota mode: none.
[   13.347109][    T1] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[   13.358719][    T1] devtmpfs: mounted
[   13.364364][    T1] Freeing unused kernel image (initmem) memory: 1024K
[   13.371662][    T1] Checked W+X mappings: passed, no W+X pages found
[   13.378083][    T1] Run /bin/systemd as init process
[   13.389038][    T1] Kernel panic - not syncing: Requested init /bin/systemd failed (error -2).
[   13.397708][    T1] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.5.7-mvebu-tld-1 #1
[   13.405323][    T1] Hardware name: Marvell Armada 380/385 (Device Tree)
[   13.411977][    T1]  unwind_backtrace from show_stack+0x10/0x14
[   13.417948][    T1]  show_stack from dump_stack_lvl+0x40/0x4c
[   13.423735][    T1]  dump_stack_lvl from panic+0x104/0x308
[   13.429256][    T1]  panic from kernel_init+0xa0/0x130
[   13.434428][    T1]  kernel_init from ret_from_fork+0x14/0x28
[   13.440212][    T1] Exception stack(0xf0831fb0 to 0xf0831ff8)
[   13.445993][    T1] 1fa0:                                     00000000 00000000 00000000 00000000
[   13.454915][    T1] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   13.463836][    T1] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   13.471191][    C0] CPU0: stopping
[   13.471196][    C0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.5.7-mvebu-tld-1 #1
[   13.471203][    C0] Hardware name: Marvell Armada 380/385 (Device Tree)
[   13.471207][    C0]  unwind_backtrace from show_stack+0x10/0x14
[   13.471223][    C0]  show_stack from dump_stack_lvl+0x40/0x4c
[   13.471232][    C0]  dump_stack_lvl from do_handle_IPI+0x84/0x11c
[   13.471243][    C0]  do_handle_IPI from ipi_handler+0x14/0x20
[   13.471254][    C0]  ipi_handler from handle_percpu_devid_irq+0x4c/0xe8
[   13.471269][    C0]  handle_percpu_devid_irq from handle_irq_desc+0x1c/0x2c
[   13.471286][    C0]  handle_irq_desc from gic_handle_irq+0x58/0x64
[   13.471299][    C0]  gic_handle_irq from generic_handle_arch_irq+0x28/0x3c
[   13.471308][    C0]  generic_handle_arch_irq from __irq_svc+0x88/0xc8
[   13.471317][    C0] Exception stack(0xc1001f20 to 0xc1001f68)
[   13.471324][    C0] 1f20: 00000000 c0ddbca8 0000103c 00000001 00000000 00000000 00000000 c100e140
[   13.471331][    C0] 1f40: c100a010 c100a070 c0f42104 0000011f 00000001 c1001f70 c0a73cb0 c0a73cb4
[   13.471335][    C0] 1f60: 20000113 ffffffff
[   13.471339][    C0]  __irq_svc from default_idle_call+0x28/0x2c
[   13.471349][    C0]  default_idle_call from do_idle+0x108/0x280
[   13.471360][    C0]  do_idle from cpu_startup_entry+0x28/0x2c
[   13.471369][    C0]  cpu_startup_entry from rest_init+0xb8/0xd4
[   13.471379][    C0]  rest_init from arch_post_acpi_subsys_init+0x0/0x8
[   13.603887][    T1] ---[ end Kernel panic - not syncing: Requested init /bin/systemd failed (error -2). ]---

Edited 3 time(s). Last edit at 10/10/2025 10:15AM by Storm.

Quote

** Edit: Never mind the rest of this post. I fixed the boot issue by making a symlink from /bin/systemd to /sbin/init.**

Nice! It's strange that the symlink is missing, but we'll take the victory.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)