Welcome! Log In Create A New Profile

Advanced

NSA 325 V2 Debian Is Possible!

Posted by Buttzy10169 
Re: NSA 325 V2 Debian Is Possible!
May 26, 2017 05:32AM
lolinger,

> Noted that no cpufreq folder is created unter /sys
> /devices/system/cpu/cpu0. Therefore the CPU-clock
> is 1,6GHz all time. I am using latest rootfs and k
> ernel image.
> cpufreq-info gives the following error:
> analyzing CPU 0:
> no or unknown cpufreq-driver active
>
> What's happening? The kirkwood cpufreq-driver is n
> ot supported by the kernel?

It is not supported by the kernel. Most of original Kirkwood plugs have very low power consumption at idle so that was never considered.

Since we have now several Kirkwood NAS that could use the feature, I will add it to the next release if so requested.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: NSA 325 V2 Debian Is Possible!
May 26, 2017 08:52AM
I'd be very happy if you could do that.
Don't forget that there are countries with very high energy prices.



Edited 1 time(s). Last edit at 05/26/2017 08:53AM by lolinger.
Re: NSA 325 V2 Debian Is Possible!
May 26, 2017 08:28PM
Re: NSA 325 V2 Debian Is Possible!
July 09, 2017 01:16AM
Well,

uBoot is stuck after loading the Kernel with linux-4.11.3-kirkwood-tld-2. The kernel does not boot up after loading. I am still using linux-4.10.9-kirkwood-tld-1 which works fine for me but without cpufreq of course.
I boot with DTB files included in the kernel and EXT2 for boot partition.



Edited 1 time(s). Last edit at 07/09/2017 01:18AM by lolinger.
Re: NSA 325 V2 Debian Is Possible!
July 09, 2017 02:30AM
lolinger,

> uBoot is stuck after loading the Kernel with linux
> -4.11.3-kirkwood-tld-2. The kernel does not boot u
> p after loading. I am still using linux-4.10.9-kir
> kwood-tld-1 which works fine for me but without cp
> ufreq of course.
> I boot with DTB files included in the kernel and E
> XT2 for boot partition.

Do you have serial console? and what did you try to set in Debian before rebooting?

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: NSA 325 V2 Debian Is Possible!
July 09, 2017 04:20AM
Yeah, I have a serial console.
After U-Boot is done with loading the kernel and ramdisk, nothing happens.
Re: NSA 325 V2 Debian Is Possible!
July 09, 2017 04:39AM
lolinger,

The cpufreq is working on a few of my boxes with linux-4.11.3-kirkwood-tld-2.

If you don't post your serial console boot log then I have no idea what's wrong with your NSA325 :)

If you'd like me to help figure out, then power up, interrupt serial console and
printenv
boot

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
andreasnsa
Re: NSA 325 V2 Debian Is Possible!
July 12, 2017 02:47PM
Same problem here with fresh install on NSA325v2 with rootfs Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2. After installing linux-4.11.3-kirkwood-tld-2-bodhi.tar.bz2 and reboot the NSA is stuck in Loading Kernel. With 4.10.9 its working.
Re: NSA 325 V2 Debian Is Possible!
July 12, 2017 04:56PM
andreasnsa & lolinger,

I'm running my NSA325v2 with this latest kernel linux-4.11.3-kirkwood-tld-2 for a while. And just rebooted it a couple days ago. So not sure what is the problem in your box.

1. Which u-boot are you running in your box? my latest release, or stock?
2. If running my u-boot image, do you have netconsole? Please post that log.
3. Do you have serial console, and if yes, please post the serial boot log.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
crstil1979
Re: NSA 325 V2 Debian Is Possible!
July 22, 2017 05:52AM
hello... i would like to update my uboot... i.m confused, what have to do now?
i haven't managed to run debian....
my bootenv is mess
i'm in this point.......



U-Boot 2014.07-tld-4 (Aug 02 2015 - 00:40:12)
ZyXEL NSA325 2-Bay Power Media Server

SoC: Kirkwood 88F6282_??
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: egiga0 [PRIME]
MV88E1318 PHY initialized on egiga0
Unknown command 'button' - try 'help'
Unknown command 'button' - try 'help'
Unknown command 'button' - try 'help'
Hit any key to stop autoboot: 0

NAND read: invalid mtd device 'nand_mtd'
Wrong Image Format for bootm command
Error occured, error code = 112
ERROR: can't get kernel image!
NSA325>
Re: NSA 325 V2 Debian Is Possible!
July 22, 2017 03:43PM
crstil1979,

Quote

U-Boot 2014.07-tld-4 (Aug 02 2015 - 00:40:12)

This is relatively new version. So to set the envs correctly and boot into Debian :

1. Create the Debian rootfs if you have not done so, using Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 (or use your existing rootfs if you already have one before that boots OK):

http://forum.doozan.com/read.php?2,12096

2. And then follow the instruciton in this post to create the default envs file uEnv.txt:

http://forum.doozan.com/read.php?2,14351,23556#msg-23556

3. Boot and watch serial console. Post the bootlog here if you have problem booting completely into Debian.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: NSA 325 V2 Debian Is Possible!
August 03, 2017 04:50AM
everything goes ok
Now i have updated with ubout 2016 and i have run debian 4.4.0
Also i managed to install omv 3.0.86
But.... when i insert sata hdd the boot proccess stop
What is going wrong?
Attachments:
open | download - log.txt (17.5 KB)
Re: NSA 325 V2 Debian Is Possible!
August 03, 2017 03:57PM
cratsil1979,

Because you have multiple drives during boot, and the default envs on uboot-2014.07 did not take care of that automatically. So the kernel does not know which drive is the system drive.

Try again with this newer script uboot.2016.05-tld-1.environment.scr in this post:

http://forum.doozan.com/read.php?3,29362,29390#msg-29390

Even though it was for u-boot-2016.05, it should work the same way for your current installed u-boot-2014.07.

------

By the way, once you booted into Debian, you should install the latest u-boot

Quote

Last Updated 19 June 2016

I've uploaded 2016.05-tld-1 U-Boot images for Pogo E02, GoFlexNet, GoFlex Home, Dockstar, Pogo V4/Mobile, iConnect, Netgear Stora, Sheevaplug, NSA320, NSA325, NSA310S/320S, NSA310, and HP-T5325.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: