4.14.1-kirkwood-tld-1 on Buffalo LS-XHL January 08, 2018 05:00PM |
Registered: 6 years ago Posts: 4 |
... [ 6.891645] libphy: orion_mdio_bus: probed [ 6.896060] orion-mdio f1072004.mdio-bus: Cannot register MDIO bus (-19) [ 6.903029] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 6.911011] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ...
... [ 0.328668] libphy: orion_mdio_bus: probed [ 0.329599] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 0.330381] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral [ 0.407381] mv643xx_eth_port mv643xx_eth_port.1 eth0: port 0 with MAC address 00:24:a5:a6:3a:4b [ 0.407537] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ...
Re: 4.14.1-kirkwood-tld-1 on Buffalo LS-XHL January 09, 2018 12:22AM |
Admin Registered: 13 years ago Posts: 18,570 |
printenvand then
boot
dmesg cat /etc/fw_env.config fw_printenv
Re: 4.14.1-kirkwood-tld-1 on Buffalo LS-XHL January 09, 2018 02:59PM |
Registered: 6 years ago Posts: 4 |
> cat /etc/fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd0 0x70000 0x10000 0x10000
>fw_printenv autoload=no baudrate=115200 bootargs=console=ttyS0,115200 root=/dev/sda2 bootcmd=run bootcmd_${bootsource} bootcmd_hdd=ide reset && ext2load ide ${hdpart} ${kernel_addr} /${uimage} && ext2load ide ${hdpart} ${ramdisk_addr} /${initrd} && bootm ${kernel_addr} ${ramdisk_addr} bootcmd_net=bootp 0x00100000 uImage && tftpboot 0x00800000 uInitrd && bootm 0x00100000 0x00800000 bootcmd_rescue=run config_nc_dhcp; run nc bootcmd_usb=usb start && fatload usb 0:1 0x00100000 /uImage && fatload usb 0:1 0x00800000 /uInitrd && bootm 0x00100000 0x00800000 bootdelay=3 bootsource=hdd config_nc_dhcp=setenv autoload_old ${autoload}; setenv autoload no && bootp && setenv ncip && setenv autoload ${autoload_old}; setenv autoload_old eraseenv=sf probe 0 && sf erase 0x70000 +0x10000 ethaddr=00:24:a5:b7:4b:5c filesize=0x24dc3d hdpart=0:1 hostname=NAS initrd=initrd.buffalo kernel_addr=0x00800000 loadaddr=0x00800000 nc=setenv stdin nc; setenv stdout nc; setenv stderr nc ramdisk_addr=0x01000000 restore_env=run standard_env; saveenv; reset ser=setenv stdin serial; setenv stdout serial; setenv stderr serial standard_env=setenv ipaddr; setenv netmask; setenv serverip; setenv ncip; setenv gatewayip; setenv ethact; setenv bootfile; setenv dnsip; setenv bootsource hdd; run ser stderr=serial stdin=serial stdout=serial uimage=uImage.buffalo
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.1-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 PST 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Buffalo Linkstation LS-XHL [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c0d9d13c, node_mem_map cfdf9000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda2 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 246444K/262144K available (8192K kernel code, 714K rwdata, 2040K rodata, 1024K init, 285K bss, rved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0900000 (9184 kB) [ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB) [ 0.000000] .data : 0xc0d00000 - 0xc0db2aec ( 715 kB) [ 0.000000] .bss : 0xc0db94b0 - 0xc0e00a4c ( 286 kB) [ 0.000000] random: get_random_u32 called from cache_alloc_refill+0x378/0x8dc with crng_init=0 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000010] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000049] Switching to timer-based delay loop, resolution 5ns [ 0.000606] Console: colour dummy device 80x30 [ 0.000646] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.000673] pid_max: default: 32768 minimum: 301 [ 0.000867] Security Framework initialized [ 0.001029] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001054] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002027] CPU: Testing write buffer coherency: ok [ 0.003156] Setting up static identity map for 0x100000 - 0x100058 [ 0.003451] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.003732] Hierarchical SRCU implementation. [ 0.007183] devtmpfs: initialized [ 0.012088] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.012119] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.012555] prandom: seed boundary self test passed [ 0.016741] prandom: 100 self tests passed [ 0.016754] pinctrl core: initialized pinctrl subsystem [ 0.017977] NET: Registered protocol family 16 [ 0.018423] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.020120] cpuidle: using governor ladder [ 0.020202] cpuidle: using governor menu [ 0.020653] Feroceon L2: Enabling L2 [ 0.020701] Feroceon L2: Cache support initialised. [ 0.021087] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.021201] [Firmware Info]: /ocp@f1000000/ethernet-controller@76000/ethernet1-port@0: local-mac-address is not set [ 0.026380] No ATAGs? [ 0.034315] vgaarb: loaded [ 0.034632] SCSI subsystem initialized [ 0.034827] libata version 3.00 loaded. [ 0.035072] usbcore: registered new interface driver usbfs [ 0.035132] usbcore: registered new interface driver hub [ 0.035209] usbcore: registered new device driver usb [ 0.036140] clocksource: Switched to clocksource orion_clocksource [ 0.128156] VFS: Disk quotas dquot_6.6.0 [ 0.128245] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.137255] NET: Registered protocol family 2 [ 0.138043] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.138083] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.138118] TCP: Hash tables configured (established 2048 bind 2048) [ 0.138210] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.138236] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.138426] NET: Registered protocol family 1 [ 0.138866] RPC: Registered named UNIX socket transport module. [ 0.138879] RPC: Registered udp transport module. [ 0.138887] RPC: Registered tcp transport module. [ 0.138895] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.138908] PCI: CLS 0 bytes, default 32 [ 0.139157] Unpacking initramfs... [ 0.139173] Initramfs unpacking failed: junk in compressed archive [ 0.139198] Freeing initrd memory: 4K [ 0.139283] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.140024] audit: initializing netlink subsys (disabled) [ 0.140448] Initialise system trusted keyrings [ 0.140497] Key type blacklist registered [ 0.140594] audit: type=2000 audit(0.130:1): state=initialized audit_enabled=0 res=1 [ 0.140669] workingset: timestamp_bits=30 max_order=16 bucket_order=0 [ 0.140752] zbud: loaded [ 0.141688] NFS: Registering the id_resolver key type [ 0.141722] Key type id_resolver registered [ 0.141730] Key type id_legacy registered [ 0.141749] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.141758] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.142040] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.142242] fuse init (API version 7.26) [ 0.142605] orangefs_debugfs_init: called with debug mask: :none: :0: [ 0.142777] orangefs_init: module version upstream loaded [ 0.142789] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 1.276145] random: fast init done [ 6.059478] jitterentropy: Initialization failed with host not compliant with requirements: 2 [ 6.060298] Key type asymmetric registered [ 6.060311] Asymmetric key parser 'x509' registered [ 6.060380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 6.060393] io scheduler noop registered [ 6.060401] io scheduler deadline registered [ 6.060493] io scheduler cfq registered (default) [ 6.061777] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 6.063785] mv_xor f1060800.xor: Marvell shared XOR driver [ 6.126909] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 6.127153] mv_xor f1060900.xor: Marvell shared XOR driver [ 6.186918] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 6.187383] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 6.188569] console [ttyS0] disabled [ 6.188639] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 6.824307] console [ttyS0] enabled [ 6.834193] loop: module loaded [ 6.837680] sata_mv f1080000.sata: version 1.28 [ 6.837887] sata_mv f1080000.sata: slots 32 ports 1 [ 6.844258] scsi host0: sata_mv [ 6.847687] ata1: SATA max UDMA/133 irq 33 [ 6.853170] m25p80 spi0.0: m25p40 (512 Kbytes) [ 6.857725] 3 ofpart partitions found on MTD device spi0.0 [ 6.863237] Creating 3 MTD partitions on "spi0.0": [ 6.868081] 0x000000000000-0x000000060000 : "uboot" [ 6.873979] 0x000000060000-0x000000070000 : "dtb" [ 6.879638] 0x000000070000-0x000000080000 : "uboot_env" [ 6.886819] libphy: Fixed MDIO Bus: probed [ 6.891645] libphy: orion_mdio_bus: probed [ 6.896060] orion-mdio f1072004.mdio-bus: Cannot register MDIO bus (-19) [ 6.903029] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 6.911011] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.917668] ehci-pci: EHCI PCI platform driver [ 6.922183] ehci-orion: EHCI orion driver [ 6.926472] orion-ehci f1050000.ehci: EHCI Host Controller [ 6.932009] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 6.939926] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 6.966180] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 6.972463] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.979315] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.986593] usb usb1: Product: EHCI Host Controller [ 6.991494] usb usb1: Manufacturer: Linux 4.14.1-kirkwood-tld-1 ehci_hcd [ 6.998243] usb usb1: SerialNumber: f1050000.ehci [ 7.003540] hub 1-0:1.0: USB hub found [ 7.007404] hub 1-0:1.0: 1 port detected [ 7.012006] usbcore: registered new interface driver usb-storage [ 7.018425] mousedev: PS/2 mouse device common for all mice [ 7.024539] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0 [ 7.031686] i2c /dev entries driver [ 7.036949] hidraw: raw HID events driver (C) Jiri Kosina [ 7.042701] drop_monitor: Initializing network drop monitor service [ 7.049346] NET: Registered protocol family 17 [ 7.053893] Key type dns_resolver registered [ 7.058855] registered taskstats version 1 [ 7.062968] Loading compiled-in X.509 certificates [ 7.067938] zswap: loaded using pool lzo/zbud [ 7.078872] Key type big_key registered [ 7.084686] Key type encrypted registered [ 7.090485] rtc-mv f1010300.rtc: setting system clock to 2018-01-07 20:08:20 UTC (1515355700) [ 9.976183] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 10.006389] ata1.00: ATA-8: SAMSUNG HD203WI, 1AN10002, max UDMA/133 [ 10.012686] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 10.046374] ata1.00: configured for UDMA/133 [ 10.061177] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD203WI 0002 PQ: 0 ANSI: 5 [ 10.069400] ata1: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 10.076820] ata1: edma_err_cause=00000020 pp_flags=00000000, SError=00180000 [ 10.083903] ata1: SError: { 10B8B Dispar } [ 10.088053] ata1: hard resetting link [ 10.417686] ata1: SATA link down (SStatus 0 SControl F300) [ 10.925172] ata1: hard resetting link [ 13.876192] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 13.936397] ata1.00: configured for UDMA/133 [ 13.940693] ata1: EH complete [ 13.945557] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 13.953572] sd 0:0:0:0: [sda] Write Protect is off [ 13.958463] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.958586] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.040067] sda: sda1 sda2 sda5 sda6 [ 14.045658] sd 0:0:0:0: [sda] Attached SCSI disk [ 14.082243] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem [ 14.111856] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 14.119664] VFS: Mounted root (ext3 filesystem) readonly on device 8:2. [ 14.137014] devtmpfs: mounted [ 14.143286] Freeing unused kernel memory: 1024K [ 16.686049] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 17.090797] marvell-cesa f1030000.crypto: CESA device successfully registered [ 17.150949] orion_wdt: Initial timeout 21 sec [ 19.125272] Adding 1002492k swap on /dev/sda5. Priority:-2 extents:1 across:1002492k FS [ 19.271642] EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended [ 19.306281] EXT4-fs (sda2): re-mounted. Opts: (null) [ 20.856223] random: crng init done [ 21.450739] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 21.473945] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 21.519826] XFS (sda6): Mounting V4 Filesystem [ 21.623520] XFS (sda6): Ending clean mount [ 23.903868] NET: Registered protocol family 10 [ 23.909506] Segment Routing with IPv6 [ 28.453725] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 28.475638] NFSD: starting 90-second grace period (net c0d93240)
cat zImage-4.14.1-kirkwood-tld-1 dts/kirkwood-lsxhl.dtb > zImage_w_dtb mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n 'Linux-4.14.1-kirkwood-tld-1' -d zImage_w_dtb uImage.buffalo
Re: 4.14.1-kirkwood-tld-1 on Buffalo LS-XHL January 10, 2018 04:58AM |
Admin Registered: 13 years ago Posts: 18,570 |
ramdisk_addr=0x01000000
0x02100000
Re: 4.14.1-kirkwood-tld-1 on Buffalo LS-XHL January 10, 2018 05:11PM |
Registered: 6 years ago Posts: 4 |
Re: 4.14.1-kirkwood-tld-1 on Buffalo LS-XHL January 10, 2018 11:40PM |
Admin Registered: 13 years ago Posts: 18,570 |
setenv ramdisk_addr 0x01000000
boot
[ 0.139157] Unpacking initramfs... [ 0.139173] Initramfs unpacking failed: junk in compressed archive
Re: 4.14.1-kirkwood-tld-1 on Buffalo LS-XHL January 14, 2018 11:52AM |
Registered: 6 years ago Posts: 4 |
Re: 4.14.1-kirkwood-tld-1 on Buffalo LS-XHL January 14, 2018 12:46PM |
Admin Registered: 13 years ago Posts: 18,570 |
Re: 4.14.1-kirkwood-tld-1 on Buffalo LS-XHL January 14, 2018 10:24PM |
Admin Registered: 13 years ago Posts: 18,570 |