Re: Linux Kernel 4.0 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) June 30, 2015 04:08PM |
Registered: 9 years ago Posts: 104 |
Bus 001 Device 012: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
[84001.411456] usb 1-1.3.1: new low-speed USB device number 12 using oxnas-ehci [84001.621964] usb 1-1.3.1: New USB device found, idVendor=051d, idProduct=0002 [84001.629562] usb 1-1.3.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [84001.638794] usb 1-1.3.1: Product: Back-UPS CS 650 FW:817.v6.I USB FW:v6 [84001.646417] usb 1-1.3.1: Manufacturer: American Power Conversion [84001.654548] usb 1-1.3.1: SerialNumber: XXXXXXXXXXX [[b]84003.224967] hid-generic 0003:051D:0002.0005: device has no listeners, quitting[/b]
root@xxxxxxxxx:~# apctest 2015-06-30 22:59:59 apctest 3.14.10 (13 September 2011) debian Checking configuration ... Attached to driver: usb sharenet.type = Network & ShareUPS Disabled cable.type = USB Cable mode.type = USB UPS Driver Setting up the port ... apctest FATAL ERROR in linux-usb.c at line 609 Cannot find UPS device -- For a link to detailed USB trouble shooting information, please see http://www.apcupsd.com/support.html. apctest error termination completed
Re: Linux Kernel 4.0 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) June 30, 2015 05:46PM |
Admin Registered: 14 years ago Posts: 19,317 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) July 03, 2015 08:44AM |
Admin Registered: 14 years ago Posts: 19,317 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) July 12, 2015 05:04PM |
Registered: 11 years ago Posts: 1,303 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) July 12, 2015 05:12PM |
Admin Registered: 14 years ago Posts: 19,317 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) July 13, 2015 04:59PM |
Registered: 11 years ago Posts: 1,303 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) August 06, 2015 04:43PM |
Registered: 9 years ago Posts: 104 |
FileDescriptor
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) August 16, 2015 03:58PM |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) August 16, 2015 04:17PM |
Admin Registered: 14 years ago Posts: 19,317 |
FileDescriptor
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) August 17, 2015 02:39PM |
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS DRAM: 128 MiB IDE: Bus 0: OK Device 0: Model: ST940210AS Firm: 3.ALC Ser#: 5QX33HCL Type: Hard Disk Supports 48-bit addressing Capacity: 38154.3 MB = 37.2 GB (78140160 x 512) NAND: 128 MiB reading u-boot.env In: serial Out: serial Err: serial Net: mii0 ## Error: "safeboot" not defined Hit any key to stop autoboot: 0 4488520 bytes read in 731 ms (5.9 MiB/s) 7033 bytes read in 44 ms (155.3 KiB/s) magic: 0xd00dfeed totalsize: 0x1b79 (7033) off_dt_struct: 0x38 off_dt_strings: 0x18d4 off_mem_rsvmap: 0x28 version: 17 last_comp_version: 16 boot_cpuid_phys: 0x0 size_dt_strings: 0x2a5 size_dt_struct: 0x189c number mem_rsv: 0x0 ## Booting kernel from Legacy Image at 60000000 ... Image Name: Linux-4.1.0-oxnas-tld-1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4488456 Bytes = 4.3 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 61000000 Booting using the fdt blob at 0x61000000 Loading Kernel Image ... OK Loading Device Tree to 67e26000, end 67e2ab78 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.1.0-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #3 SMP PREEMPT Wed Jul 1 05:11:47 PDT 2015 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Pogoplug Pro [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] Start Ox820 platform [ 0.000000] PERCPU: Embedded 11 pages/cpu @c7edc000 s15456 r8192 d21408 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/sda2 rootfstype=ext4 ubi.mtd=data,512 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 120984K/131072K available (6235K kernel code, 275K rwdata, 1852K rodata, 200K init, 237K bss, 10088K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc07edec8 (8088 kB) [ 0.000000] .init : 0xc07ee000 - 0xc0820000 ( 200 kB) [ 0.000000] .data : 0xc0820000 - 0xc0864fa0 ( 276 kB) [ 0.000000] .bss : 0xc0864fa0 - 0xc08a06a0 ( 238 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000000] clocksource rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns [ 0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns [ 0.000176] Console: colour dummy device 80x30 [ 0.000209] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440) [ 0.050032] pid_max: default: 32768 minimum: 301 [ 0.050191] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050209] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051082] Initializing cgroup subsys net_cls [ 0.051148] CPU: Testing write buffer coherency: ok [ 0.051548] Setting up static identity map for 0x60008220 - 0x60008258 [ 0.170147] Brought up 2 CPUs [ 0.170170] SMP: Total of 2 processors activated (638.97 BogoMIPS). [ 0.171151] devtmpfs: initialized [ 0.176432] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.176670] prandom: seed boundary self test passed [ 0.181352] prandom: 100 self tests passed [ 0.181383] pinctrl core: initialized pinctrl subsystem [ 0.182312] NET: Registered protocol family 16 [ 0.182878] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.210009] cpuidle: using governor ladder [ 0.240005] cpuidle: using governor menu [ 0.245160] gpio-oxnas 44000000.gpio: at address c8848000 [ 0.245491] gpio-oxnas 44100000.gpio: at address c884a000 [ 0.246087] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver [ 0.259456] vgaarb: loaded [ 0.260037] SCSI subsystem initialized [ 0.260930] usbcore: registered new interface driver usbfs [ 0.261045] usbcore: registered new interface driver hub [ 0.261199] usbcore: registered new device driver usb [ 0.261419] pps_core: LinuxPPS API ver. 1 registered [ 0.261432] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.261480] PTP clock support registered [ 0.263260] cfg80211: Calling CRDA to update world regulatory domain [ 0.263790] Switched to clocksource rps_clocksource_timer [ 0.283555] NET: Registered protocol family 2 [ 0.284544] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.284590] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.284625] TCP: Hash tables configured (established 1024 bind 1024) [ 0.284725] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.284769] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.285056] NET: Registered protocol family 1 [ 0.285542] RPC: Registered named UNIX socket transport module. [ 0.285562] RPC: Registered udp transport module. [ 0.285573] RPC: Registered tcp transport module. [ 0.285585] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.287380] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.287459] Initialise system trusted keyring [ 0.300592] zpool: loaded [ 0.300618] zbud: loaded [ 0.306147] NFS: Registering the id_resolver key type [ 0.306214] Key type id_resolver registered [ 0.306227] Key type id_legacy registered [ 0.306268] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.306288] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.307238] fuse init (API version 7.23) [ 0.308894] Key type big_key registered [ 0.314877] alg: No test for stdrng (krng) [ 0.368235] Key type asymmetric registered [ 0.368271] Asymmetric key parser 'x509' registered [ 0.368409] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.368445] io scheduler noop registered [ 0.368465] io scheduler deadline registered [ 0.368819] io scheduler cfq registered (default) [ 0.369528] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.371182] console [ttyS0] disabled [ 0.371276] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A [ 0.899750] console [ttyS0] enabled [ 0.913927] loop: module loaded [ 0.918999] scsi host0: sata_oxnas [ 0.922920] ata1: SATA max UDMA/133 irq 7 [ 0.927180] ox820sata: reseting SATA core [ 0.928122] nand: Could not find valid ONFI parameter page; aborting [ 0.928166] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 0.928171] nand: Hynix NAND 128MiB 3,3V 8-bit [ 0.928179] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.928197] Scanning device for bad blocks [ 1.012377] 2 ofpart partitions found on MTD device 41000000.nand [ 1.018444] Creating 2 MTD partitions on "41000000.nand": [ 1.023843] 0x000000000000-0x000000e00000 : "boot" [ 1.030343] 0x000000e00000-0x000008000000 : "data" [ 1.037626] stmmaceth 40400000.ethernet: no reset control found [ 1.043560] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 1.048586] Ring mode enabled [ 1.051635] DMA HW capability register supported [ 1.056138] Enhanced/Alternate descriptors [ 1.060464] Enabled extended descriptors [ 1.064465] RX Checksum Offload Engine supported (type 2) [ 1.069921] TX Checksum insertion supported [ 1.074178] Wake-Up On Lan supported [ 1.077813] Enable RX Mitigation via HW Watchdog Timer [ 1.086804] libphy: stmmac: probed [ 1.090257] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active [ 1.096696] eth0: PHY ID 001cc915 at 7 IRQ POLL (stmmac-0:07) [ 1.102545] PPP generic driver version 2.4.2 [ 1.107407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.113953] ehci-pci: EHCI PCI platform driver [ 1.118904] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 1.124439] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 1.132300] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100 [ 1.150602] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 1.156899] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.163740] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.170949] usb usb1: Product: EHCI Host Controller [ 1.175802] usb usb1: Manufacturer: Linux 4.1.0-oxnas-tld-1 ehci_hcd [ 1.182136] usb usb1: SerialNumber: 40200100.ehci [ 1.187824] hub 1-0:1.0: USB hub found [ 1.191695] hub 1-0:1.0: 2 ports detected [ 1.196679] usbcore: registered new interface driver cdc_acm [ 1.202403] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.210503] usbcore: registered new interface driver cdc_wdm [ 1.216391] usbcore: registered new interface driver usb-storage [ 1.222645] usbcore: registered new interface driver usbserial [ 1.228538] usbcore: registered new interface driver usbserial_generic [ 1.235138] usbserial: USB Serial support registered for generic [ 1.241569] mousedev: PS/2 mouse device common for all mice [ 1.247296] i2c /dev entries driver [ 1.252206] hidraw: raw HID events driver (C) Jiri Kosina [ 1.257840] usbcore: registered new interface driver usbhid [ 1.263475] usbhid: USB HID core driver [ 1.269168] NET: Registered protocol family 10 [ 1.275343] sit: IPv6 over IPv4 tunneling driver [ 1.281172] NET: Registered protocol family 17 [ 1.285783] Key type dns_resolver registered [ 1.291614] Loading compiled-in X.509 certificates [ 1.300840] Key type encrypted registered [ 1.305651] ubi0: attaching mtd1 [ 1.315320] __nand_correct_data: uncorrectable ECC error [ 1.320762] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 82:0, read only 64 bytes, retry [ 1.332057] __nand_correct_data: uncorrectable ECC error [ 1.337354] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 82:0, read only 64 bytes, retry [ 1.348625] __nand_correct_data: uncorrectable ECC error [ 1.353958] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 82:0, read only 64 bytes, retry [ 1.365232] __nand_correct_data: uncorrectable ECC error [ 1.370562] ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 82:0, read 64 bytes [ 1.380556] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.1.0-oxnas-tld-1 #3 [ 1.387397] Hardware name: PLXTECH NAS782X SoC (Flattened Device Tree) [ 1.393940] [<c0010b24>] (unwind_backtrace) from [<c000cf28>] (show_stack+0x10/0x14) [ 1.401684] [<c000cf28>] (show_stack) from [<c05eb3c8>] (dump_stack+0x80/0xc8) [ 1.408885] [<c05eb3c8>] (dump_stack) from [<c03a1e5c>] (ubi_io_read+0x118/0x2f4) [ 1.416366] [<c03a1e5c>] (ubi_io_read) from [<c03a2280>] (ubi_io_read_ec_hdr+0x44/0x23c) [ 1.424450] [<c03a2280>] (ubi_io_read_ec_hdr) from [<c03a6f54>] (ubi_attach+0x130/0x1574) [ 1.432622] [<c03a6f54>] (ubi_attach) from [<c039bce8>] (ubi_attach_mtd_dev+0x608/0xc64) [ 1.440706] [<c039bce8>] (ubi_attach_mtd_dev) from [<c08082f4>] (ubi_init+0x1e4/0x2bc) [ 1.448596] [<c08082f4>] (ubi_init) from [<c0009784>] (do_one_initcall+0x80/0x1d4) [ 1.456163] [<c0009784>] (do_one_initcall) from [<c07eed54>] (kernel_init_freeable+0x110/0x1d4) [ 1.464852] [<c07eed54>] (kernel_init_freeable) from [<c05e908c>] (kernel_init+0x8/0xec) [ 1.472926] [<c05e908c>] (kernel_init) from [<c000a4e8>] (ret_from_fork+0x14/0x2c) [ 1.480524] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1.492183] ata1.00: ATA-7: ST940210AS, 3.ALC, max UDMA/100 [ 1.497735] ata1.00: 78140160 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 1.508835] ata1.00: configured for UDMA/100 [ 1.513656] scsi 0:0:0:0: Direct-Access ATA ST940210AS C PQ: 0 ANSI: 5 [ 1.531399] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.540039] sd 0:0:0:0: [sda] Write Protect is off [ 1.545134] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.607656] sda: sda1 sda2 sda3 [ 1.613573] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.628469] ubi0: scanning is finished [ 1.632345] ubi0 error: ubi_read_volume_table: the layout volume was not found [ 1.640440] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd1, error -22 [ 1.647493] UBI error: cannot attach mtd1 [ 1.686804] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.694745] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 1.721848] devtmpfs: mounted [ 1.725135] Freeing unused kernel memory: 200K (c07ee000 - c0820000) INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [ 3.470072] cfg80211: Calling CRDA to update world regulatory domain [....] Starting the hotplug events dispatcher: udevd[ 3.874685] udevd[187]: starting version 175 . ok [ ok ] Synthesizing the initial hotplug events...done. [ ok ] Waiting for /dev to be fully populated...done. [....] Setting parameters of disc: (none)[ 6.630100] cfg80211: Calling CRDA to update world regulatory domain [ ok . [ 6.934796] EXT4-fs (sda2): re-mounted. Opts: (null) [....] Checking root file system...fsck from util-linux 2.20.1 rootfs: clean, 36321/262144 files, 356304/1048576 blocks done. [ 7.319531] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ ok ] Cleaning up temporary files... /tmp /lib/init/rw. [ ok ] Loading kernel modules...done. [ 9.231206] random: nonblocking pool is initialized [ 9.800281] cfg80211: Calling CRDA to update world regulatory domain [....] Activating lvm and md swap...[ 11.333521] Adding 524284k swap on /swapfile1. Priority:-1 extents:3 across:540668k FS done. [....] Checking file systems...fsck from util-linux 2.20.1 home: clean, 11/2179072 files, 149030/8714591 blocks done. [ ok ] Mounting local filesystems...done. [ ok ] Activating swapfile swap...done. [ 12.970119] cfg80211: Calling CRDA to update world regulatory domain [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables ...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/74:f0:6d:xx:xx:xx Sending on LPF/eth0/74:f0:xx:xx:xx:xx Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 16.140003] cfg80211: Calling CRDA to update world regulatory domain [ 18.180157] stmmaceth 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 19.300016] cfg80211: Calling CRDA to update world regulatory domain DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.178.1 bound to 192.168.178.76 -- renewal in 393138 seconds. [ 22.460052] cfg80211: Calling CRDA to update world regulatory domain done. [ ok ] Starting rpcbind daemon.... [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... [ 24.783572] zram: Created 4 device(s) [ 24.840998] zram0: detected capacity change from 0 to 23269376 Setting up swapspace version 1, size = 22720 KiB no label, UUID=66c55381-2c3f-423b-aca4-9c042f3fe775 [ 24.920609] Adding 22720k swap on /dev/zram0. Priority:10 extents:1 across:22720k SSFS [ 24.933204] zram1: detected capacity change from 0 to 23269376 Setting up swapspace version 1, size = 22720 KiB no label, UUID=8e1d4cee-75cf-47ff-81f2-4a8aa6db9adf [ 24.965273] Adding 22720k swap on /dev/zram1. Priority:10 extents:1 across:22720k SSFS [ 24.975331] zram2: detected capacity change from 0 to 23269376 Setting up swapspace version 1, size = 22720 KiB no label, UUID=54916f10-f6a8-4fab-a802-8f00e0267d1c [ 25.014320] Adding 22720k swap on /dev/zram2. Priority:10 extents:1 across:22720k SSFS [ 25.025904] zram3: detected capacity change from 0 to 23269376 Setting up swapspace version 1, size = 22720 KiB no label, UUID=605692a9-c70a-4f8d-a0ba-67df7af58126 [ 25.068244] Adding 22720k swap on /dev/zram3. Priority:10 extents:1 across:22720k SSFS INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [ 25.620098] cfg80211: Calling CRDA to update world regulatory domain [ ok ] Starting rpcbind daemon...[....] Already running.. [ ok ] Starting NTP server: ntpd. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1834 (syslogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting NFS common utilities: statd idmapd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting OpenBSD Secure Shell server: sshd. 1837 (klogd) . ok setting : hdparm -S 120 /dev/sda -S: bad/missing standby-interval value (0..255) [ 28.780034] cfg80211: Calling CRDA to update world regulatory domain Debian GNU/Linux 7 debian ttyS0 debian login: [ 31.940021] cfg80211: Calling CRDA to update world regulatory domain [ 35.100014] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) August 17, 2015 03:30PM |
Admin Registered: 14 years ago Posts: 19,317 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) August 30, 2015 02:16PM |
Registered: 10 years ago Posts: 68 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) August 30, 2015 03:09PM |
Admin Registered: 14 years ago Posts: 19,317 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) August 31, 2015 10:18AM |
Registered: 10 years ago Posts: 68 |
Re: Linux Kernel 3.14.0 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 05, 2015 05:29PM |
Registered: 9 years ago Posts: 7 |
Re: Linux Kernel 3.14.0 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 05, 2015 07:59PM |
Admin Registered: 14 years ago Posts: 19,317 |
cd /media/sdb1/boot mkimage -A arm -O linux -T kernel -C none -a 0x60008000 -e 0x60008000 -n Linux-3.17.0-oxnas-tld-1 -d vmlinuz-3.17.0-oxnas-tld-1 uImage
Re: Linux Kernel 3.14.0 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 06, 2015 02:47AM |
Registered: 9 years ago Posts: 7 |
> cd /media/sdb1/boot > mkimage -A arm -O linux -T kernel -C none -a > 0x60008000 -e 0x60008000 -n > Linux-3.17.0-oxnas-tld-1 -d > vmlinuz-3.17.0-oxnas-tld-1 uImage >>
Re: Linux Kernel 3.14.0 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 06, 2015 04:06AM |
Registered: 9 years ago Posts: 7 |
Re: Linux Kernel 3.14.0 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 06, 2015 11:51AM |
Admin Registered: 14 years ago Posts: 19,317 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 06, 2015 01:20PM |
Registered: 9 years ago Posts: 7 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 06, 2015 04:07PM |
Admin Registered: 14 years ago Posts: 19,317 |
printenv
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 07, 2015 12:50AM |
Registered: 9 years ago Posts: 7 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 07, 2015 01:48AM |
Admin Registered: 14 years ago Posts: 19,317 |
Quote
Updated 02 Nov 2014:
Rootfs Debian-3.17.0-oxnas-tld-1-rootfs-bodhi.tar.bz2 was uploaded.
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 08, 2015 03:27AM |
Registered: 9 years ago Posts: 7 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 08, 2015 03:32AM |
Registered: 10 years ago Posts: 12 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 08, 2015 03:35AM |
Registered: 9 years ago Posts: 7 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 08, 2015 12:41PM |
Registered: 11 years ago Posts: 158 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 08, 2015 02:38PM |
Registered: 9 years ago Posts: 104 |
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 08, 2015 02:48PM |
Registered: 11 years ago Posts: 158 |
Me
Re: Linux Kernel 4.1 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) October 18, 2015 01:54PM |