|
newbie help thx! July 25, 2021 04:03PM |
Registered: 2 years ago Posts: 1 |
The system is going down for reboot NOW! [info] Using makefile-style concurrent boot in runlevel 6. [ ok ] Stopping hotplug events dispatcher: systemd-udevd. [ ok ] Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon. [....] Stopping busybox' klogd implementation: klogd2767 (klogd) Stopped klogd (pid 2767). . ok [....] Stopping busybox' syslogd implementation: syslogd2740 (syslogd) . ok [ ok ] Stopping DLNA/UPnP-AV media server: minidlna. [ ok ] Stopping NFS kernel daemon: mountd nfsd. [ ok ] Unexporting directories for NFS kernel daemon.... [ ok ] Asking all remaining processes to terminate...done. [ ok ] All processes ended within 1 seconds...done. [ ok ] Stopping NFS common utilities: idmapd statd. [info] Saving the system clock. [info] Hardware Clock updated to Sun Jul 25 13:58:16 PDT 2021. [ ok ] Stopping RPC port mapper daemon: rpcbind. [....] Deconfiguring network interfaces...Removed stale PID file Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/5e:38:f3:15:57:6a Sending on LPF/eth0/5e:38:f3:15:57:6a Sending on Socket/fallback DHCPRELEASE of 192.168.1.104 on eth0 to 192.168.1.1 port 67 [ 971.588125][ T3398] mvneta f1070000.ethernet eth0: Link is Down done. [ ok ] Saving random seed...done. [....] Will now unmount temporary filesystems:umount: /tmp unmounted . ok [ ok ] Will now deactivate swap:. [....] Mounting root filesystem read-only...[ 971.909289][ T3510] EXT4-fs (sdb1): re-mounted. Opts: (null) done. [info] Will now restart. [ 972.030420][ T3531] sd 1:0:0:0: [sdc] Synchronizing SCSI cache [ 972.036649][ T3531] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 972.043539][ T3531] reboot: Restarting system BootROM - 1.73 Booting from NAND flash General initialization - Version: 1.0.0 Detected Device ID 6810 High speed PHY - Version: 2.0 Init RD NAS topology board SerDes lanes topology details: | Lane # | Speed | Type | -------------------------------- | 0 | 06 | SATA0 | | 1 | 05 | USB3 HOST0 | | 2 | 06 | SATA1 | | 5 | 05 | USB3 HOST1 | -------------------------------- High speed PHY - Ended Successfully DDR3 Training Sequence - Ver TIP-1.26.0 mvSysEnvGetTopologyUpdateInfo: TWSI Read failed DDR3 Training Sequence - Switching XBAR Window to FastPath Window DDR3 Training Sequence - Ended Successfully Not detected suspend to RAM indication BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01-svn48206 (Dec 03 2015 - 02:50:37) Marvell version: 2014_T3.0p6 Board: RD-NAS-88F6820-DDR3 SoC: MV88F6810 Rev A0 running 1 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 1332 [MHz] L2 @ 666 [MHz] TClock @ 200 [MHz] DDR @ 666 [MHz] DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled DRAM: 512 MiB Map: Code: 0x1fed0000:0x1ff95e28 BSS: 0x1ffef2b4 Stack: 0x1f9cff20 Heap: 0x1f9d0000:0x1fed0000 U-Boot Environment: 0x00200000:0x00280000 (NAND) NAND: 256 MiB MMC: mv_sdh: 0 *** Booting kernel from kernel 1 @0x00000000; run bootcmd_custom; *** USB2.0 0: Host Mode USB3.0 0: Host Mode USB3.0 1: Host Mode Board configuration detected: Net: | port | Interface | PHY address | |--------|-----------|--------------| | egiga0 | RGMII | 0x01 | egiga0 [PRIME] Hit any key to stop autoboot: 0 NAND read: device 0 whole chip Attempt to read outside the flash area 0 bytes read: ERROR Booting from USB ... (Re)start USB... USB0: Port (usbActive) : 0 Interface (usbType = 2) : USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found 5077080 bytes read in 480 ms (10.1 MiB/s) 9488618 bytes read in 562 ms (16.1 MiB/s) ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux-5.2.9-mvebu-tld-1 Created: 2021-07-24 10:28:53 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5077016 Bytes = 4.8 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02900000 ... Image Name: initramfs-5.2.9-mvebu-tld-1 Created: 2019-08-26 11:03:27 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 9488554 Bytes = 9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.2.9-mvebu-tld-1 (root@tldDebianVM) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #1 SMP PREEMPT Mon Aug 19 12:47:39 PDT 2019 [ 0.000000][ T0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000][ T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Zyxel NAS326 [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writealloc [ 0.000000][ T0] percpu: Embedded 21 pages/cpu s55244 r8192 d22580 u86016 [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=armada-nand:2m(u-boot),2m(env),2m(config),15m(kernel1),110m(rootfs1),15m(kernel2),-(rootfs2) earlyprintk=serial [ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000][ T0] Memory: 494816K/524288K available (10240K kernel code, 833K rwdata, 2724K rodata, 1024K init, 343K bss, 29472K reserved, 0K cma-reserved, 0K highmem) [ 0.000000][ T0] random: get_random_u32 called from cache_alloc_refill+0x30c/0x830 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000][ T0] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000][ T0] L2C-310 D prefetch enabled, offset 1 lines [ 0.000000][ T0] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000][ T0] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB [ 0.000000][ T0] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001 [ 0.000008][ T0] sched_clock: 64 bits at 666MHz, resolution 1ns, wraps every 4398046511103ns [ 0.008679][ T0] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x999999d70a, max_idle_ns: 440795225152 ns [ 0.020380][ T0] Switching to timer-based delay loop, resolution 1ns [ 0.027188][ T0] Ignoring duplicate/late registration of read_current_timer delay [ 0.034904][ T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.046964][ T0] Console: colour dummy device 80x30 [ 0.052103][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 1332.00 BogoMIPS (lpj=6660000) [ 0.063370][ T0] pid_max: default: 32768 minimum: 301 [ 0.068772][ T0] LSM: Security Framework initializing [ 0.074110][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.081399][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.089502][ T0] *** VALIDATE proc *** [ 0.093601][ T0] *** VALIDATE cgroup1 *** [ 0.097865][ T0] *** VALIDATE cgroup2 *** [ 0.102150][ T0] CPU: Testing write buffer coherency: ok [ 0.107718][ T0] CPU0: Spectre v2: using BPIALL workaround [ 0.113571][ T1] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.177055][ T1] Setting up static identity map for 0x100000 - 0x100060 [ 0.183998][ T1] mvebu-soc-id: MVEBU SoC ID=0x6810, Rev=0x4 [ 0.189943][ T1] mvebu-pmsu: Initializing Power Management Service Unit [ 0.207028][ T1] rcu: Hierarchical SRCU implementation. [ 0.247028][ T1] smp: Bringing up secondary CPUs ... [ 0.252234][ T1] smp: Brought up 1 node, 1 CPU [ 0.256919][ T1] SMP: Total of 1 processors activated (1332.00 BogoMIPS). [ 0.263953][ T1] CPU: All CPU(s) started in SVC mode. [ 0.269778][ T1] devtmpfs: initialized [ 0.277179][ T1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.285749][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.296372][ T1] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.303291][ T1] xor: measuring software checksum speed [ 0.407046][ T1] arm4regs : 2096.800 MB/sec [ 0.507037][ T1] 8regs : 1584.800 MB/sec [ 0.607028][ T1] 32regs : 1676.000 MB/sec [ 0.611887][ T1] xor: using function: arm4regs (2096.800 MB/sec) [ 0.618147][ T1] prandom: seed boundary self test passed [ 0.625258][ T1] prandom: 100 self tests passed [ 0.630048][ T1] pinctrl core: initialized pinctrl subsystem [ 0.636765][ T1] NET: Registered protocol family 16 [ 0.642764][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.650786][ T1] audit: initializing netlink subsys (disabled) [ 0.656986][ T28] audit: type=2000 audit(0.620:1): state=initialized audit_enabled=0 res=1 [ 0.666224][ T1] cpuidle: using governor ladder [ 0.671543][ T1] cpuidle: using governor menu [ 0.676315][ T1] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.685006][ T1] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.691691][ T1] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling [ 0.700534][ T1] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling [ 0.947199][ T1] raid6: int32x8 gen() 222 MB/s [ 1.117208][ T1] raid6: int32x8 xor() 172 MB/s [ 1.287182][ T1] raid6: int32x4 gen() 216 MB/s [ 1.457135][ T1] raid6: int32x4 xor() 180 MB/s [ 1.627060][ T1] raid6: int32x2 gen() 233 MB/s [ 1.797099][ T1] raid6: int32x2 xor() 239 MB/s [ 1.967331][ T1] raid6: int32x1 gen() 201 MB/s [ 2.137108][ T1] raid6: int32x1 xor() 224 MB/s [ 2.142053][ T1] raid6: using algorithm int32x2 gen() 233 MB/s [ 2.148128][ T1] raid6: .... xor() 239 MB/s, rmw enabled [ 2.153677][ T1] raid6: using intx1 recovery algorithm [ 2.160739][ T1] vgaarb: loaded [ 2.165021][ T1] SCSI subsystem initialized [ 2.177368][ T1] usbcore: registered new interface driver usbfs [ 2.183550][ T1] usbcore: registered new interface driver hub [ 2.190120][ T1] usbcore: registered new device driver usb [ 2.196368][ T1] media: Linux media interface: v0.10 [ 2.201877][ T1] videodev: Linux video capture interface: v2.00 [ 2.208371][ T1] pps_core: LinuxPPS API ver. 1 registered [ 2.214008][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 2.224052][ T1] PTP clock support registered [ 2.238172][ T1] clocksource: Switched to clocksource arm_global_timer [ 2.717755][ T1] VFS: Disk quotas dquot_6.6.0 [ 2.722428][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.740382][ T1] NET: Registered protocol family 2 [ 2.746367][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 2.754787][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 2.762925][ T1] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 2.770095][ T1] TCP: Hash tables configured (established 4096 bind 4096) [ 2.777165][ T1] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 2.783748][ T1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 2.790807][ T1] NET: Registered protocol family 1 [ 2.826214][ T1] RPC: Registered named UNIX socket transport module. [ 2.832841][ T1] RPC: Registered udp transport module. [ 2.838227][ T1] RPC: Registered tcp transport module. [ 2.843603][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.850719][ T1] PCI: CLS 0 bytes, default 64 [ 2.855425][ T1] Trying to unpack rootfs image as initramfs... [ 3.213537][ T1] Freeing initrd memory: 9268K [ 3.218317][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.225708][ T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 3.236125][ T1] Initialise system trusted keyrings [ 3.241869][ T1] Key type blacklist registered [ 3.246647][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 3.253860][ T1] zbud: loaded [ 3.267664][ T1] NFS: Registering the id_resolver key type [ 3.273500][ T1] Key type id_resolver registered [ 3.278405][ T1] Key type id_legacy registered [ 3.283098][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.290491][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.297682][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 3.305756][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 3.313037][ T1] orangefs_init: module version upstream loaded [ 3.326559][ T1] async_tx: api initialized (async) [ 3.331666][ T1] Key type asymmetric registered [ 3.336438][ T1] Asymmetric key parser 'x509' registered [ 3.342105][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 3.352077][ T1] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver [ 3.362764][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 3.428650][ T1] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 3.438015][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 3.498648][ T1] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 3.576109][ T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.585705][ T1] printk: console [ttyS0] disabled [ 3.611656][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 12500000) is a 16550A [ 3.621416][ T1] printk: console [ttyS0] enabled [ 3.621416][ T1] printk: console [ttyS0] enabled [ 3.631242][ T1] printk: bootconsole [earlycon0] disabled [ 3.631242][ T1] printk: bootconsole [earlycon0] disabled [ 3.643850][ T1] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 3.653993][ T1] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 3.674528][ T1] scsi host0: ahci-mvebu [ 3.689200][ T1] scsi host1: ahci-mvebu [ 3.693620][ T1] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 43 [ 3.702380][ T1] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 43 [ 3.712025][ T1] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda [ 3.719176][ T1] nand: Macronix MX30LF2G18AC [ 3.723820][ T1] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 3.732536][ T1] Bad block table found at page 131008, version 0x01 [ 3.739772][ T1] Bad block table found at page 130944, version 0x01 [ 3.746849][ T1] nand_read_bbt: bad block at 0x0000096a0000 [ 3.753018][ T1] nand_read_bbt: bad block at 0x000009720000 [ 3.758970][ T1] 7 fixed-partitions partitions found on MTD device pxa3xx_nand-0 [ 3.766668][ T1] Creating 7 MTD partitions on "pxa3xx_nand-0": [ 3.772833][ T1] 0x000000000000-0x000000200000 : "U-Boot" [ 3.779473][ T1] 0x000000200000-0x000000400000 : "U-Boot env" [ 3.786506][ T1] 0x000000400000-0x000000e00000 : "Config" [ 3.793243][ T1] 0x000000e00000-0x000001d00000 : "Kernel-1" [ 3.800176][ T1] 0x000001d00000-0x000008700000 : "RootFS-1" [ 3.807195][ T1] 0x000008700000-0x000009600000 : "Kernel-2" [ 3.814184][ T1] 0x000009600000-0x000010000000 : "RootFS-2" [ 3.823117][ T1] libphy: Fixed MDIO Bus: probed [ 3.830071][ T1] libphy: orion_mdio_bus: probed [ 3.843069][ T1] mvneta f1070000.ethernet eth0: Using random mac address 52:b6:42:9a:71:0d [ 3.853645][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.861159][ T1] ehci-pci: EHCI PCI platform driver [ 3.866407][ T1] ehci-orion: EHCI orion driver [ 3.871465][ T1] orion-ehci f1058000.usb: EHCI Host Controller [ 3.877605][ T1] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 [ 3.886115][ T1] orion-ehci f1058000.usb: irq 39, io mem 0xf1058000 [ 3.918155][ T1] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 [ 3.924944][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 3.933965][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.941950][ T1] usb usb1: Product: EHCI Host Controller [ 3.947567][ T1] usb usb1: Manufacturer: Linux 5.2.9-mvebu-tld-1 ehci_hcd [ 3.954679][ T1] usb usb1: SerialNumber: f1058000.usb [ 3.960427][ T1] hub 1-0:1.0: USB hub found [ 3.965005][ T1] hub 1-0:1.0: 1 port detected [ 3.970485][ T1] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 3.976743][ T1] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2 [ 3.985092][ T1] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 [ 3.995174][ T1] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000 [ 4.001876][ T1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 4.010924][ T1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.018909][ T1] usb usb2: Product: xHCI Host Controller [ 4.024529][ T1] usb usb2: Manufacturer: Linux 5.2.9-mvebu-tld-1 xhci-hcd [ 4.031638][ T1] usb usb2: SerialNumber: f10f0000.usb3 [ 4.037445][ T1] hub 2-0:1.0: USB hub found [ 4.042052][ T1] hub 2-0:1.0: 1 port detected [ 4.046995][ T1] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 4.053174][ T1] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3 [ 4.061472][ T1] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed [ 4.068665][ T1] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.077579][ T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02 [ 4.086656][ T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.094638][ T1] usb usb3: Product: xHCI Host Controller [ 4.100249][ T1] usb usb3: Manufacturer: Linux 5.2.9-mvebu-tld-1 xhci-hcd [ 4.107336][ T1] usb usb3: SerialNumber: f10f0000.usb3 [ 4.113171][ T1] hub 3-0:1.0: USB hub found [ 4.117741][ T1] hub 3-0:1.0: 1 port detected [ 4.122824][ T1] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 4.129034][ T1] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4 [ 4.137324][ T1] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 [ 4.147377][ T1] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000 [ 4.154145][ T1] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 4.163183][ T1] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.171164][ T1] usb usb4: Product: xHCI Host Controller [ 4.176767][ T1] usb usb4: Manufacturer: Linux 5.2.9-mvebu-tld-1 xhci-hcd [ 4.183873][ T1] usb usb4: SerialNumber: f10f8000.usb3 [ 4.189712][ T1] hub 4-0:1.0: USB hub found [ 4.194285][ T1] hub 4-0:1.0: 1 port detected [ 4.199262][ T1] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 4.205310][ T1] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5 [ 4.213676][ T1] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed [ 4.220852][ T1] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.229870][ T1] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02 [ 4.238909][ T1216] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.245857][ T1] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.253863][ T1212] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.260839][ T1] usb usb5: Product: xHCI Host Controller [ 4.266467][ T1] usb usb5: Manufacturer: Linux 5.2.9-mvebu-tld-1 xhci-hcd [ 4.273586][ T1212] ata1.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133 [ 4.281171][ T1] usb usb5: SerialNumber: f10f8000.usb3 [ 4.286751][ T1212] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32) [ 4.294339][ T1] hub 5-0:1.0: USB hub found [ 4.298938][ T1] hub 5-0:1.0: 1 port detected [ 4.303619][ T1216] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 4.311560][ T1] usbcore: registered new interface driver usblp [ 4.318035][ T1216] ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 32) [ 4.325420][ T1] usbcore: registered new interface driver usb-storage [ 4.332520][ T1] mousedev: PS/2 mouse device common for all mice [ 4.339007][ T1216] ata2.00: configured for UDMA/133 [ 4.344032][ T1212] ata1.00: configured for UDMA/133 [ 4.349053][ T18] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 4.357482][ T1] armada38x-rtc f10a3800.rtc: registered as rtc0 [ 4.364299][ T1] i2c /dev entries driver [ 4.368807][ T7] scsi 0:0:0:0: Direct-Access ATA WDC WD40EFRX-68N 0A82 PQ: 0 ANSI: 5 [ 4.380852][ T1220] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 4.389806][ T1] watchdog: f1020300.watchdog: driver supplied timeout (4294967295) out of range [ 4.399302][ T15] scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5 [ 4.408693][ T1220] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.415217][ T7] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 4.424306][ T1] watchdog: f1020300.watchdog: falling back to default timeout (171) [ 4.432416][ T1220] sd 0:0:0:0: [sda] Write Protect is off [ 4.437996][ T7] sd 1:0:0:0: [sdb] Write Protect is off [ 4.443841][ T1] orion_wdt: Initial timeout 171 sec [ 4.449127][ T1220] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.459050][ T7] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.469255][ T1] device-mapper: uevent: version 1.0.3 [ 4.474877][ T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 4.515581][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 4.522943][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 4.530344][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 4.537763][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 4.544647][ T1] device-mapper: raid: Loading target version 1.14.0 [ 4.551384][ T7] sdb: sdb1 sdb2 sdb3 [ 4.556769][ T18] usb 1-1: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00 [ 4.567586][ T7] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 4.578212][ T18] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.586096][ T18] usb 1-1: Product: Ultra Fit [ 4.593254][ T18] usb 1-1: Manufacturer: SanDisk [ 4.598076][ T18] usb 1-1: SerialNumber: 4C530000320220116224 [ 4.610567][ T18] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.634117][ T18] scsi host2: usb-storage 1-1:1.0 [ 4.677953][ T1] marvell-cesa f1090000.crypto: CESA device successfully registered [ 4.686262][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 4.692966][ T1] usbcore: registered new interface driver usbhid [ 4.699441][ T1] usbhid: USB HID core driver [ 4.704341][ T1] drop_monitor: Initializing network drop monitor service [ 4.711793][ T1] NET: Registered protocol family 10 [ 4.727598][ T1] Segment Routing with IPv6 [ 4.732111][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.739727][ T1] NET: Registered protocol family 17 [ 4.755234][ T1] 8021q: 802.1Q VLAN Support v1.8 [ 4.760209][ T1] Key type dns_resolver registered [ 4.765348][ T1] ThumbEE CPU extension supported. [ 4.770413][ T1] Registering SWP/SWPB emulation handler [ 4.776391][ T1] registered taskstats version 1 [ 4.781389][ T1] Loading compiled-in X.509 certificates [ 4.786941][ T1] zswap: loaded using pool lzo/zbud [ 4.825093][ T1] Key type big_key registered [ 4.845913][ T1] Key type encrypted registered [ 4.852452][ T18] v5.0-sata0: supplied by pwr_en_sata0 [ 4.857823][ T18] v12.0-sata0: supplied by pwr_en_sata0 [ 4.864593][ T1] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 4.872725][ T1] armada38x-rtc f10a3800.rtc: setting system clock to 2021-07-25T20:58:39 UTC (1627246719) [ 4.882904][ T1] v5.0-sata1: supplied by pwr_en_sata1 [ 4.888377][ T1] v12.0-sata1: supplied by pwr_en_sata1 [ 4.893830][ T1] v5.0-sata0: disabling [ 4.897862][ T1] v12.0-sata0: disabling [ 4.902045][ T1] v5.0-sata1: disabling [ 4.906077][ T1] v12.0-sata1: disabling [ 5.017087][ T1220] sda: sda1 sda2 sda3 [ 5.022115][ T1220] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.030115][ T1] Freeing unused kernel memory: 1024K [ 5.058514][ T1] Checked W+X mappings: passed, no W+X pages found [ 5.064904][ T1] Run /init as init process Loading, please wait... Starting version 241 [ 5.669013][ T1562] usbcore: registered new interface driver uas [ 5.709621][ T1220] scsi 2:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 5.727718][ T15] sd 2:0:0:0: [sdc] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 5.744855][ T15] sd 2:0:0:0: [sdc] Write Protect is off [ 5.754868][ T15] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.779800][ T15] sdc: sdc1 [ 5.786898][ T15] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 5.898223][ C0] random: fast init done Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.33.1 [/sbin/fsck.ext3 (1) -- /dev/sdc1] fsck.ext3 -a -C0 /dev/sdc1 rootfs: clean, 26008/1880480 files, 454128/7507712 blocks done. [ 16.743732][ T1586] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem [ 16.828929][ T1586] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.93 booting [info] Using makefile-style concurrent boot in runlevel S. [ ok ] Starting hotplug events dispatcher: systemd-udevd. [ ok ] Synthesizing the initial hotplug events (subsystems)...done. [ ok ] Synthesizing the initial hotplug events (devices)...done. [....] Waiting for /dev to be fully populated...[ 19.085856][ T1774] systemd-udevd[1774]: Using default interface naming scheme 'v240'. [ 19.147344][ T1774] systemd-udevd[1774]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 19.223717][ T1773] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 19.267876][ T1773] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 19.291718][ T1774] systemd-udevd[1774]: Could not generate persistent MAC address for eth0: No such file or directory [ 19.332599][ T1773] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 19.377803][ T1775] systemd-udevd[1775]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 19.394456][ T1776] systemd-udevd[1776]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 19.409855][ T1770] systemd-udevd[1770]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 19.446127][ C0] random: crng init done [ 19.496180][ T1775] systemd-udevd[1775]: Could not generate persistent MAC address for ip6tnl0: No such file or directory done. [ ok ] Setting hostname to 'debian'...done. [ ok ] Activating swap:. [ 20.660529][ T1984] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro [info] Will now check all file systems. fsck from util-linux 2.33.1 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs[ ok hat location is writable.. [ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done. [ ok . [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Starting Setting kernel variables: sysctl. [ ok ] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 22.172867][ T2514] mvneta f1070000.ethernet eth0: PHY [f1072004.mdio-mii:01] driver [Marvell 88E1510] [ 22.182591][ T2514] mvneta f1070000.ethernet eth0: configuring for phy/rgmii-id link mode Listening on LPF/eth0/52:b6:42:9a:71:0d Sending on LPF/eth0/52:b6:42:9a:71:0d Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 [ 26.348803][ T18] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 26.357569][ T18] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPOFFER of 192.168.1.104 from 192.168.1.1 DHCPREQUEST for 192.168.1.104 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.1.104 from 192.168.1.1 bound to 192.168.1.104 -- renewal in 39688 seconds. done. [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 2731 (syslogd) . ok [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 2758 (klogd) . ok [ ok ] Starting DLNA/UPnP-AV media server: minidlna. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting periodic command scheduler: cron. [ ok ] Starting system message bus: dbus. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [ ok ] Starting NTP server: ntpd. [ ok ] Starting OpenBSD Secure Shell server: sshd. [....] Running local boot scripts (/etc/rc.local)/etc/rc.local: 29: exit: Illegal number: 0#!/bin/sh /etc/rc.local: 7: exit: Illegal number: 0cd /etc/rc.local: 5: exit: Illegal number: 0cd /etc/rc.local: 8: /etc/rc.local: ./sshd: not found /etc/rc.local: 4: /etc/rc.local: ./sshd: not found /etc/rc.local: 6: /etc/rc.local: ./sshd: not found /etc/rc.local: 9: exit: Illegal number: 0cd /etc/rc.local: 3: exit: Illegal number: 0cd /etc/rc.local: 10: /etc/rc.local: ./sshd: not found /etc/rc.local: 11: exit: Illegal number: 0cd /etc/rc.local: 12: /etc/rc.local: ./sshd: not found /etc/rc.local: 13: exit: Illegal number: 0cd /etc/rc.local: 2: /etc/rc.local: ./sshd: not found /etc/rc.local: 15: exit: Illegal number: 0cd /etc/rc.local: 16: /etc/rc.local: ./sshd: not found /etc/rc.local: 18: /etc/rc.local: ./sshd: not found /etc/rc.local: 20: /etc/rc.local: ./sshd: not found /etc/rc.local: 14: /etc/rc.local: ./sshd: not found /etc/rc.local: 19: exit: Illegal number: 0cd /etc/rc.local: 21: exit: Illegal number: 0cd /etc/rc.local: 22: /etc/rc.local: ./sshd: not found /etc/rc.local: 17: exit: Illegal number: 0cd /etc/rc.local: 23: exit: Illegal number: 0cd /etc/rc.local: 24: /etc/rc.local: ./sshd: not found /etc/rc.local: 25: exit: Illegal number: 0cd /etc/rc.local: 26: /etc/rc.local: ./sshd: not found /etc/rc.local: 27: exit: Illegal number: 0cd /etc/rc.local: 28: /etc/rc.local: ./sshd: not found failed! [FAIL] startpar: service(s) returned failure: rc.local ... failed! Debian GNU/Linux 10 debian ttyS0 debian login: