Welcome! Log In Create A New Profile


DEbian lenny boot on GoFlex Net

Posted by Russell 
DEbian lenny boot on GoFlex Net
August 19, 2010 05:35PM
I've tried to load Lenny via your instructions Jeff and have the following issue:

CE>> run bootcmd_usb

NAND read: device 0 offset 0x2500000, size 0x80000

Reading data from 0x257f800 -- 100% complete.
524288 bytes read: OK
## Starting application at 0x00C00000 ...

And that's where it stops.

Every second power cycle boots into the 'normal' boot via nand - I gather this is a design feature.

The goflex net has only one usb port - could this be the issue? Hardware wise the big difference seems to be two sata ports and one usb, the ram/nand size seems to be the same.

Your Email:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.