Hi,
Update: Solution!!
The problem not related to Go flex net. It is a hidden
Power saving setting in Fritzbox - Network - LAN - .
When power saving switch offed then solved...
I have Bodhi 3.16.0-kirkwood-tld-2 and had old router.
Today I've got Gigabit ethernet router, but Goflex connect only 100 Mbit/s
Why not 1 Gbit/s speed of the ethernet? (while other device on the router other port shown as 1 Gbit/s.)
Should I set something in debian?
On my goflex dmesg:
root@pogo:~# dmesg | grep eth
[ 13.017998] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 14.096860] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:10:75:26:6d:ec
[ 39.060355] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.698337] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 40.708176] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Regards,
Robert
Edited 2 time(s). Last edit at 11/04/2014 03:06PM by robert1968@gmail.com.