not enough space on /dev/sda1

Hello Jeff,

thanks for your nice work!
I'm sorry to tell you that the script not work. Debootstrap faild by messaging:
"You may not have enough space on /dev/sda1",

but df say's:
Pogoplug:/tmp$ df -h
Filesystem Size Used Available Use% Mounted on
/dev/mtdblock2 32.0M 15.9M 16.1M 50% /
none 61.6M 688.0k 60.9M 1% /tmp
/dev/sda1 965.1M 158.7M 757.4M 17% /tmp/debian

so i can't verify the problem?! Could you help me?

For notice, i use the Dockstar out of the box, without updateing the pogoplug software.

Greetings from Germany
Lemmling

What was the output preceding that error?

Hello Jeff,

thanks for your response, this message was generated of your dockstar.debian-squeeze.sh install script.
The memory warning comes after the debootstrap installation ( in the end of retriving and validating the packets)

Greetings
Lemming

I have reproduce it now, this message is generated after the debootstrap installation, after this lines:

I: Chosen extractor for .deb packages: ar
I: Extracting libacl1...
I: Extracting libattr1...
I: Extracting base-files...
I: Extracting base-passwd...
I: Extracting bash...
I: Extracting libbz2-1.0...
I: Extracting coreutils...
I: Extracting dash...
I: Extracting libdb4.8...
I: Extracting debconf-i18n...
I: Extracting debconf...
debootstrap failed.  You may not have enough space on /dev/sda1

But df say correctly:

debootstrap failed.  You may not have enough space on /dev/sda1
Pogoplug:/tmp$ df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/mtdblock2           32.0M     15.9M     16.1M  50% /
none                     61.6M      1.2M     60.4M   2% /tmp
/dev/sda1               965.1M    110.4M    805.6M  12% /tmp/debian
Pogoplug:/tmp$

Debootstrap saves a log in /tmp/debian/debootstrap. I think it's called debootstrap.log. If you can post that file, I'll take a look.

-- Jeff

Hello Jeff,

to post the debootstrap.log for you, i mounted the usb-device on my other linux machine, and there i see that many folders, also debootstrap are empty, so i have no log to post now.

In addition, i try the installation of dockstar.debian-squeeze.sh with the fourth usb device, (a micro sd card with an usb adapter) and now i can see, that after the extracting process, the script started the unpacking process (of "the base system"), so i'm confident that it works now.

i'll report you.

Hello Jeff,

thanks in advance, this usb work!

Linux debian 2.6.32-5-kirkwood #1 Sat Jul 24 13:37:14 UTC 2010 armv5tel