Vinay
Pogoplug E02 - fuse libfuse2 failed to install July 13, 2015 06:07AM |
Preparing to unpack .../fuse_2.9.4-1_armel.deb ... Unpacking fuse (2.9.4-1) over (2.9.2-4) ... Preparing to unpack .../libfuse2_2.9.4-1_armel.deb ... Unpacking libfuse2:armel (2.9.4-1) over (2.9.2-4) ... Setting up libfuse2:armel (2.9.4-1) ... Setting up fuse (2.9.4-1) ... update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools (0.120) ... update-initramfs: Generating /boot/initrd.img-2.6.32-5-kirkwood DTB: kirkwood-sheevaplug.dtb flash-kernel: installing version 2.6.32-5-kirkwood Generating kernel u-boot image... done. Taking backup of uImage. Installing new uImage. Generating initramfs u-boot image... done. Taking backup of uInitrd. Installing new uInitrd. Couldn't find /usr/lib/linux-image-2.6.32-5-kirkwood/kirkwood-sheevaplug.dtb run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1 dpkg: error processing package initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) .. install failed!
Re: Pogoplug E02 - fuse libfuse2 failed to install July 13, 2015 02:29PM |
Admin Registered: 13 years ago Posts: 18,580 |
grep -a --null-data U-Boot /dev/mtd0ro dmesg
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 14, 2015 06:12AM |
���������U-Boot 2010.09 (Oct 23 2010 - 11:51:16) Marvell-PinkPogo by Jeff DoozanU-Boot ** Invalid partition type "%.32s" (expect "U-Boot") U-Boot BUG at %s:%d!
[ 296.709735] uncorrectable error : [ 296.713165] uncorrectable error : [ 296.716589] uncorrectable error : ............... [ 300.328021] uncorrectable error :
Re: Pogoplug E02 - fuse libfuse2 failed to install July 14, 2015 01:56PM |
Admin Registered: 13 years ago Posts: 18,580 |
Quote
Updated 02 Sept 2014:
Rootfs Debian-3.16.0-kirkwood-tld-2 was uploaded. This rootfs is to keep in sync with kernel Linux-3.16.0-kirkwood-tld-2 (and its new features).
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 15, 2015 12:17AM |
Re: Pogoplug E02 - fuse libfuse2 failed to install July 15, 2015 02:09AM |
Admin Registered: 13 years ago Posts: 18,580 |
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 17, 2015 07:32AM |
> grep -a --null-data U-Boot /dev/mtd0ro > dmesg >
[ 356.475450] __nand_correct_data: uncorrectable ECC error [ 356.480786] __nand_correct_data: uncorrectable ECC error [ 356.486362] __nand_correct_data: uncorrectable ECC error [ 356.491694] __nand_correct_data: uncorrectable ECC error
ethact=egiga0 bootdelay=3 baudrate=115200 mainlineLinux=yes console=ttyS0,115200 led_init=green blinking led_exit=green off led_error=orange blinking mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) mtdids=nand0=orion_nand partition=nand0,2 stdin=serial stdout=serial stderr=serial rescue_installed=0 rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi force_rescue=0 force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi ubifs_mtd=3 ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; fi usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; setenv usb_root /dev/$dev; fi; done usb_scan_list=1 2 3 4 usb_scan_1=usb=0:1 dev=sda1 usb_scan_2=usb=1:1 dev=sdb1 usb_scan_3=usb=2:1 dev=sdc1 usb_scan_4=usb=3:1 dev=sdd1 usb_init=run usb_scan usb_device=0:1 usb_root=/dev/sda1 usb_rootfstype=ext2 usb_rootdelay=10 usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset ethaddr=00:25:31:04:76:5C arcNumber=2097 root@debian:~#
Re: Pogoplug E02 - fuse libfuse2 failed to install July 17, 2015 04:54PM |
Admin Registered: 13 years ago Posts: 18,580 |
shutdown -r now
dmesg mount
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 18, 2015 03:21AM |
After booted into Debian successfuly, then move on to install new u-boot.
Re: Pogoplug E02 - fuse libfuse2 failed to install July 18, 2015 03:48AM |
Admin Registered: 13 years ago Posts: 18,580 |
After booted into Debian successfuly, then > move on to install new u-boot.>
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 18, 2015 01:31PM |
root@debian:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-kirkwood-tld-2 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #2 PREEMPT Sun Aug 31 18:56:01 PDT 2014 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Marvell SheevaPlug Reference Board [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c07c303c, node_mem_map cfdfb000 [ 0.000000] DMA zone: 512 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 65536 pages, LIFO batch:15 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(dat a) [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 245692K/262144K available (5441K kernel code, 397K rwdata, 1840K rodata, 257K init, 299K bss, 16452K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc07248b0 (7283 kB) [ 0.000000] .init : 0xc0725000 - 0xc0765444 ( 258 kB) [ 0.000000] .data : 0xc0766000 - 0xc07c975c ( 398 kB) [ 0.000000] .bss : 0xc07c975c - 0xc08144dc ( 300 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:114 [ 0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474836475ns [ 7.378156] Console: colour dummy device 80x30 [ 7.378176] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) [ 7.467952] pid_max: default: 32768 minimum: 301 [ 7.468045] Security Framework initialized [ 7.468095] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 7.468106] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 7.468824] Initializing cgroup subsys devices [ 7.468865] Initializing cgroup subsys freezer [ 7.468883] Initializing cgroup subsys net_cls [ 7.468911] Initializing cgroup subsys blkio [ 7.468977] CPU: Testing write buffer coherency: ok [ 7.469323] Setting up static identity map for 0x5273f0 - 0x527448 [ 7.470828] devtmpfs: initialized [ 7.473713] prandom: seed boundary self test passed [ 7.477727] prandom: 100 self tests passed [ 7.477743] pinctrl core: initialized pinctrl subsystem [ 7.478196] regulator-dummy: no parameters [ 7.478535] NET: Registered protocol family 16 [ 7.478943] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 7.479763] cpuidle: using governor ladder [ 7.479780] cpuidle: using governor menu [ 7.479895] Kirkwood: MV88F6281-A0, TCLK=200000000. [ 7.479915] [Firmware Bug]: Feroceon L2: bootloader left the L2 cache on! [ 7.479923] Feroceon L2: Cache support initialised. [ 7.480499] initial MPP regs: 01111111 11113322 00001111 00100000 00000000 00000000 00000000 [ 7.480530] final MPP regs: 01111111 11113322 00001111 00000000 00000000 00000000 00000000 [ 7.509493] vgaarb: loaded [ 7.509852] usbcore: registered new interface driver usbfs [ 7.509928] usbcore: registered new interface driver hub [ 7.510055] usbcore: registered new device driver usb [ 7.511046] Switched to clocksource orion_clocksource [ 7.549789] NET: Registered protocol family 2 [ 7.550782] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 7.550818] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 7.550849] TCP: Hash tables configured (established 2048 bind 2048) [ 7.550920] TCP: reno registered [ 7.550934] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 7.550956] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 7.551219] NET: Registered protocol family 1 [ 7.551562] RPC: Registered named UNIX socket transport module. [ 7.551573] RPC: Registered udp transport module. [ 7.551581] RPC: Registered tcp transport module. [ 7.551588] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.551617] PCI: CLS 0 bytes, default 32 [ 7.551905] Unpacking initramfs... [ 8.055375] Freeing initrd memory: 5884K (c1101000 - c16c0000) [ 8.055513] NetWinder Floating Point Emulator V0.97 (double precision) [ 8.056673] futex hash table entries: 256 (order: -1, 3072 bytes) [ 8.056741] audit: initializing netlink subsys (disabled) [ 8.056796] audit: type=2000 audit(0.670:1): initialized [ 8.057619] zbud: loaded [ 8.057890] VFS: Disk quotas dquot_6.5.2 [ 8.057940] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.058506] NFS: Registering the id_resolver key type [ 8.058567] Key type id_resolver registered [ 8.058576] Key type id_legacy registered [ 8.058602] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 8.058616] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.058786] jffs2: version 2.2. (NAND) (SUMMARY) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc. [ 8.059092] msgmni has been set to 491 [ 8.059248] Key type big_key registered [ 8.061754] alg: No test for stdrng (krng) [ 8.061871] bounce: pool size: 64 pages [ 8.061937] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 8.061956] io scheduler noop registered [ 8.061970] io scheduler deadline registered [ 8.062136] io scheduler cfq registered (default) [ 8.062569] mv_xor mv_xor.0: Marvell shared XOR driver [ 8.101122] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 8.141114] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 8.141289] mv_xor mv_xor.1: Marvell shared XOR driver [ 8.181112] mv_xor mv_xor.1: Marvell XOR: ( xor cpy ) [ 8.221111] mv_xor mv_xor.1: Marvell XOR: ( xor cpy ) [ 8.221548] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 8.222552] console [ttyS0] disabled [ 8.242651] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A [ 8.794697] console [ttyS0] enabled [ 8.799791] nand: Could not find valid ONFI parameter page; aborting [ 8.806244] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 8.812640] nand: Hynix NAND 128MiB 3,3V 8-bit [ 8.817099] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 8.822806] Scanning device for bad blocks [ 8.935764] 4 cmdlinepart partitions found on MTD device orion_nand [ 8.942073] Creating 4 MTD partitions on "orion_nand": [ 8.947243] 0x000000000000-0x000000100000 : "u-boot" [ 8.952637] 0x000000100000-0x000000500000 : "uImage" [ 8.957982] 0x000000500000-0x000002500000 : "rootfs" [ 8.963362] 0x000002500000-0x000008000000 : "data" [ 8.969374] libphy: Fixed MDIO Bus: probed [ 8.986002] libphy: orion_mdio_bus: probed [ 8.990235] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 10.072205] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:04:76:5c [ 10.081196] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.087755] ehci-pci: EHCI PCI platform driver [ 10.092303] ehci-orion: EHCI orion driver [ 10.096408] orion-ehci orion-ehci.0: EHCI Host Controller [ 10.101881] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 10.109656] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 10.131084] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 10.137219] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.144065] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.151339] usb usb1: Product: EHCI Host Controller [ 10.156240] usb usb1: Manufacturer: Linux 3.16.0-kirkwood-tld-2 ehci_hcd [ 10.162986] usb usb1: SerialNumber: orion-ehci.0 [ 10.168376] hub 1-0:1.0: USB hub found [ 10.172226] hub 1-0:1.0: 1 port detected [ 10.177051] mousedev: PS/2 mouse device common for all mice [ 10.491105] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 10.642670] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 10.649421] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 10.656615] usb 1-1: Product: USB2.0 Hub [ 10.661522] hub 1-1:1.0: USB hub found [ 10.665666] hub 1-1:1.0: 4 ports detected [ 10.951420] usb 1-1.1: new high-speed USB device number 3 using orion-ehci [ 11.062044] usb 1-1.1: New USB device found, idVendor=08ec, idProduct=0020 [ 11.068966] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.076334] usb 1-1.1: Product: USB Flash Drive [ 11.080882] usb 1-1.1: Manufacturer: SanDisk [ 11.085190] usb 1-1.1: SerialNumber: 0D41A67102D308CD [ 11.191078] rtc-mv rtc-mv: internal RTC not ticking [ 11.196169] i2c /dev entries driver [ 11.200616] hidraw: raw HID events driver (C) Jiri Kosina [ 11.206418] drop_monitor: Initializing network drop monitor service [ 11.212971] TCP: cubic registered [ 11.216311] NET: Registered protocol family 17 [ 11.220944] Key type dns_resolver registered [ 11.225982] registered taskstats version 1 [ 11.231132] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 11.238286] PM: Hibernation image not present or could not be loaded. [ 11.239310] Freeing unused kernel memory: 256K (c0725000 - c0765000) [ 11.322005] udevd[55]: starting version 175 [ 11.506038] mvsdio mvsdio: no pins associated [ 11.516704] SCSI subsystem initialized [ 11.565405] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 11.614006] scsi0 : usb-storage 1-1.1:1.0 [ 11.627549] usbcore: registered new interface driver usb-storage [ 11.660320] usbcore: registered new interface driver uas [ 12.612028] scsi 0:0:0:0: Direct-Access SanDisk USB Flash Drive 6.51 PQ: 0 ANSI: 0 CCS [ 12.651363] sd 0:0:0:0: [sda] 7883775 512-byte logical blocks: (4.03 GB/3.75GiB) [ 12.659680] sd 0:0:0:0: [sda] Write Protect is off [ 12.664653] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08 [ 12.665079] sd 0:0:0:0: [sda] No Caching mode page found [ 12.670431] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 12.684442] sda: sda1 [ 12.689951] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 12.707106] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 21.783978] EXT2-fs (sda1): warning: mounting ext3 filesystem as ext2 [ 23.062230] udevd[235]: starting version 175 [ 23.512866] alg: hash: Test 3 failed for mv-sha1 [ 23.517544] 00000000: 10 bf d7 00 71 0b bb 83 3a 26 d0 97 13 05 99 f5 [ 23.539997] 00000010: 3a 92 53 3c [ 23.599770] alg: hash: Test 1 failed for mv-hmac-sha1 [ 23.605942] 00000000: 0c aa 9f d5 37 c3 79 3a 91 d9 21 5f 42 2b 2c 24 [ 23.621148] 00000010: b7 c3 16 0c [ 24.414772] random: nonblocking pool is initialized [ 29.779123] NET: Registered protocol family 10 [ 31.062145] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.531395] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, ful duplex, flow control disabled [ 33.541322] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready root@debian:~#
root@debian:~# mount sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=30711,mode=755) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=25184k,mode=755) /dev/sda1 on / type ext2 (rw,noatime,errors=remount-ro,user_xattr,acl) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=50360k) tmpfs on /tmp type tmpfs (rw,relatime) rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw,relatime) root@debian:~#
Re: Pogoplug E02 - fuse libfuse2 failed to install July 18, 2015 03:08PM |
Admin Registered: 13 years ago Posts: 18,580 |
[ 21.783978] EXT2-fs (sda1): warning: mounting ext3 filesystem as ext2u-boot envs
usb_rootfstype=ext2
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 19, 2015 05:11AM |
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 19, 2015 09:22AM |
Note: the above command will start a 'view-only' console. If you want to be able to interact with uBoot, you need to run the first 'nc' instance in the background and then use a second instance to send the commands back to the Dockstar: nc -l -u -p 6666 & nc -u 192.168.1.100 6666 # run killall nc after you've finished to kill the background nc process Now when your start your Dockstar, your server should display the boot process.
Re: Pogoplug E02 - fuse libfuse2 failed to install July 19, 2015 02:59PM |
Admin Registered: 13 years ago Posts: 18,580 |
> Note: the above command will start a 'view-only' > console. If you want to be able to interact with > uBoot, you need to run the first 'nc' instance in > the background and then use a second instance to > send the commands back to the Dockstar: > nc -l -u -p 6666 & > nc -u 192.168.1.100 6666 > # run killall nc after you've finished to kill the > background nc process > > Now when your start your Dockstar, your server > should display the boot process. >>
fw_printenv
/swapfile1 swap swap defaults 0 0
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 20, 2015 04:10AM |
root@debian:~# fw_printenv ethact=egiga0 bootdelay=3 baudrate=115200 mainlineLinux=yes console=ttyS0,115200 led_init=green blinking led_exit=green off led_error=orange blinking mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) mtdids=nand0=orion_nand partition=nand0,2 stdin=serial stdout=serial stderr=serial rescue_installed=0 rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi force_rescue=0 force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi ubifs_mtd=3 ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; fi usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; setenv usb_root /dev/$dev; fi; done usb_scan_list=1 2 3 4 usb_scan_1=usb=0:1 dev=sda1 usb_scan_2=usb=1:1 dev=sdb1 usb_scan_3=usb=2:1 dev=sdc1 usb_scan_4=usb=3:1 dev=sdd1 usb_init=run usb_scan usb_device=0:1 usb_root=/dev/sda1 usb_rootfstype=ext2 usb_rootdelay=10 usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset ethaddr=00:25:31:04:76:5C arcNumber=2097 serverip=192.168.10.109 ipaddr=192.168.10.112 if_netconsole=ping $serverip startstart_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; preboot=run if_netconsole start_netconsole root@debian:~#
nc -lkup 6666 10.10.10.6 6666 nc -l -u -p 6666 nc -u 192.168.10.112 6666
Re: Pogoplug E02 - fuse libfuse2 failed to install July 20, 2015 05:18AM |
Admin Registered: 13 years ago Posts: 18,580 |
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
nc -lup 6666 192.168.10.112 6666or
nc -kup 6666 192.168.10.112 6666should work.
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 20, 2015 02:44PM |
Re: Pogoplug E02 - fuse libfuse2 failed to install July 20, 2015 02:49PM |
Admin Registered: 13 years ago Posts: 18,580 |
fw_setenv start_netconsole 'setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;' fw_setenv startstart_netconsole
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 21, 2015 01:56AM |
vinay@MediaPC ~ $ nc -kup 6666 192.168.10.112 6666 U-Boot 2010.09 (Oct 23 2010 - 11:51:16) Marvell-PinkPogo by Jeff Doozan Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Loading file "/rescueme" from usb device 0:1 (usbda1) ** File not found /rescueme reading /rescueme.txt ** Unable to read "/rescueme.txt" from usb 0:1 ** Creating 1 MTD partitions on "nand0": 0x000002500000-0x000008000000 : "mtd=3" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=3" UBI: MTD device size: 91 MiB UBI: number of good PEBs: 728 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 0 UBI: available PEBs: 717 UBI: total number of reserved PEBs: 11 UBI: number of PEBs reserved for bad PEB handling: 7 UBI: max/mean erase counter: 1/1 UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19 Error reading superblock on volume 'ubi:rootfs'! Loading file "/boot/uImage" from usb device 0:1 (usbda1) 1 bytes read Found bootable drive on usb 0:1 Loading file "/boot/uImage" from usb device 0:1 (usbda1) 2756040 bytes read Loading file "/boot/uInitrd" from usb device 0:1 (usbda1) 6032465 bytes read ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-3.16.0-kirkwood-tld-2 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2755976 Bytes = 2.6 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-3.16.0-kirkwood-tld-2 Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 6032401 Bytes = 5.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ...
Re: Pogoplug E02 - fuse libfuse2 failed to install July 21, 2015 07:31PM |
Admin Registered: 13 years ago Posts: 18,580 |
> vinay@MediaPC ~ $ nc -kup 6666 192.168.10.112 > 6666 > > U-Boot 2010.09 (Oct 23 2010 - 11:51:16) > Marvell-PinkPogo by Jeff Doozan > Hit any key to stop autoboot: 0 > (Re)start USB... > USB: Register 10011 NbrPorts 1 > USB EHCI 1.00 > scanning bus for devices... 3 USB Device(s) found > scanning bus for storage devices... 1 > Storage Device(s) found > Loading file "/rescueme" from usb device 0:1 > (usbda1) > ** File not found /rescueme > reading /rescueme.txt > > ** Unable to read "/rescueme.txt" from usb 0:1 ** > Creating 1 MTD partitions on "nand0": > 0x000002500000-0x000008000000 : "mtd=3" > UBI: attaching mtd1 to ubi0 > UBI: physical eraseblock size: 131072 bytes (128 > KiB) > UBI: logical eraseblock size: 129024 bytes > UBI: smallest flash I/O unit: 2048 > UBI: sub-page size: 512 > UBI: VID header offset: 512 (aligned > 512) > UBI: data offset: 2048 > UBI: attached mtd1 to ubi0 > UBI: MTD device name: "mtd=3" > UBI: MTD device size: 91 MiB > UBI: number of good PEBs: 728 > UBI: number of bad PEBs: 0 > UBI: max. allowed volumes: 128 > UBI: wear-leveling threshold: 4096 > UBI: number of internal volumes: 1 > UBI: number of user volumes: 0 > UBI: available PEBs: 717 > UBI: total number of reserved PEBs: 11 > UBI: number of PEBs reserved for bad PEB handling: > 7 > UBI: max/mean erase counter: 1/1 > UBIFS error (pid 0): ubifs_get_sb: cannot open > "ubi:rootfs", error -19 > Error reading superblock on volume 'ubi:rootfs'! > Loading file "/boot/uImage" from usb device 0:1 > (usbda1) > 1 bytes read > Found bootable drive on usb 0:1 > Loading file "/boot/uImage" from usb device 0:1 > (usbda1) > 2756040 bytes read > Loading file "/boot/uInitrd" from usb device 0:1 > (usbda1) > 6032465 bytes read > ## Booting kernel from Legacy Image at 00800000 > ... > Image Name: Linux-3.16.0-kirkwood-tld-2 > Image Type: ARM Linux Kernel Image > (uncompressed) > Data Size: 2755976 Bytes = 2.6 MiB > Load Address: 00008000 > Entry Point: 00008000 > Verifying Checksum ... OK > ## Loading init Ramdisk from Legacy Image at > 01100000 ... > Image Name: initramfs-3.16.0-kirkwood-tld-2 > Image Type: ARM Linux RAMDisk Image (gzip > compressed) > Data Size: 6032401 Bytes = 5.8 MiB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Loading Kernel Image ... OK > OK > > Starting kernel ... > >
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 24, 2015 02:58AM |
Re: Pogoplug E02 - fuse libfuse2 failed to install July 24, 2015 03:10AM |
Admin Registered: 13 years ago Posts: 18,580 |
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 24, 2015 04:16AM |
Re: Pogoplug E02 - fuse libfuse2 failed to install July 24, 2015 04:57AM |
Admin Registered: 13 years ago Posts: 18,580 |
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 26, 2015 02:28AM |
Re: Pogoplug E02 - fuse libfuse2 failed to install July 26, 2015 02:27PM |
Admin Registered: 13 years ago Posts: 18,580 |
free
Vinay
Re: Pogoplug E02 - fuse libfuse2 failed to install July 27, 2015 12:28AM |