NSA325V2 booting problem August 29, 2015 12:45AM |
Registered: 9 years ago Posts: 25 |
Re: Linux Kernel 4.1 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs August 29, 2015 01:36AM |
Registered: 8 years ago Posts: 18 |
Linux debian 3.2.0-4-486 #1 Debian 3.2.68-1+deb7u3 i686 GNU/Linux
mkimage version 2012.04.01
mkimage: Can't map uImage: Invalid argument
Re: Linux Kernel 4.1 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs August 29, 2015 02:29AM |
Registered: 9 years ago Posts: 25 |
Re: Linux Kernel 4.1 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs August 29, 2015 02:39AM |
Admin Registered: 13 years ago Posts: 18,580 |
Re: Linux Kernel 4.1 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs August 29, 2015 04:38AM |
Registered: 8 years ago Posts: 18 |
Re: Linux Kernel 4.1 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs August 29, 2015 05:23AM |
Registered: 9 years ago Posts: 25 |
Re: Linux Kernel 4.1 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs August 29, 2015 07:12AM |
Registered: 8 years ago Posts: 18 |
Re: Linux Kernel 4.1 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs August 29, 2015 11:16AM |
Registered: 9 years ago Posts: 25 |
Re: Linux Kernel 4.1 Kirkwood (FDT) and 3.16 Kirkwood (non-FDT) package and rootfs August 29, 2015 01:54PM |
Admin Registered: 13 years ago Posts: 18,580 |
Re: NSA325V2 booting problem August 29, 2015 02:08PM |
Registered: 9 years ago Posts: 25 |
Re: NSA325V2 booting problem August 29, 2015 02:11PM |
Admin Registered: 13 years ago Posts: 18,580 |
cd /media/sdxx/boot mv uImage uImage.orig tar -xf uImage.3.18.5-kirkwood-tld-1.tar
Re: NSA325V2 booting problem August 30, 2015 01:51AM |
Registered: 8 years ago Posts: 18 |
Re: NSA325V2 booting problem August 30, 2015 02:34AM |
Registered: 8 years ago Posts: 18 |
arcNumber=4495 baudrate=115200 bootcmd=run bootcmd_uenv; run bootcmd_usb; run bootcmd_mmc; run bootcmd_sata; reset bootcmd_mmc=run mmc_init; run set_bootargs_mmc; run mmc_boot bootcmd_sata=run sata_init; run set_bootargs_sata; run sata_boot; bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootcmd_usb=run usb_init; run set_bootargs_usb; run usb_boot; bootdelay=3 console=ttyS0,115200 device=0:1 ethact=egiga0 ethaddr=b6:d0:5e:0f:a1:17 if_netconsole=ping $serverip ipaddr=192.168.0.231 led_error=orange blinking led_exit=green off led_init=green blinking mainlineLinux=yes mmc_boot=mw 0x800000 0 1; run mmc_load_uimage; if run mmc_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi mmc_init=mmc rescan mmc_load_uimage=ext2load mmc $device 0x800000 /boot/uImage mmc_load_uinitrd=ext2load mmc $device 0x1100000 /boot/uInitrd mmc_root=/dev/mmcblk0p1 mtddevname=rootfs mtddevnum=2 mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 preboot_nc=run if_netconsole start_netconsole rootdelay=5 rootfstype=ext4 sata_boot=mw 0x800000 0 1; run sata_load_uimage; if run sata_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi sata_init=ide reset sata_load_uimage=ext4load ide $device 0x800000 /boot/uImage sata_load_uinitrd=ext4load ide $device 0x1100000 /boot/uInitrd sata_root=/dev/sda1 serverip=192.168.0.220 set_bootargs_mmc=setenv bootargs console=$console root=$mmc_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts set_bootargs_sata=setenv bootargs console=$console root=$sata_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts set_bootargs_usb=setenv bootargs console=$console root=$usb_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_import=echo importing envs ...; env import -t 0x810000 uenv_load=usb start; mmc rescan; ide reset; setenv uenv_loaded 0; for devtype in usb mmc ide; do for disknum in 0; do run uenv_read_disk; done; done uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x810000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_boot=mw 0x800000 0 1; run usb_load_uimage; if run usb_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi usb_init=usb start usb_load_uimage=ext4load usb $device 0x800000 /boot/uImage usb_load_uinitrd=ext4load usb $device 0x1100000 /boot/uInitrd usb_root=/dev/sda1 Environment size: 2844/131068 bytes
Re: NSA325V2 booting problem August 30, 2015 03:35AM |
Admin Registered: 13 years ago Posts: 18,580 |
Re: NSA325V2 booting problem August 30, 2015 01:53PM |
Registered: 8 years ago Posts: 18 |
Re: NSA325V2 booting problem September 01, 2015 03:52PM |
Registered: 8 years ago Posts: 18 |